Français dropdown-ico

Manuel d’utilisation Heat & Glo LifeStyle BE-41IPILPC

69 pages 4.44 mb
Télécharger

Aller à la page of 69

Summary
  • Heat & Glo LifeStyle BE-41IPILPC - page 1

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 1 Models: BE-41C BE-41LPC BE-41IPIC BE-41IPILPC • DO NOT store or use gasoline or other fl am- mable vapors and liquids in the vicinity of this or any other appliance. • What to do if you smell gas - DO NOT try to light any appliance. - DO NOT touch any electrical sw ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 2

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 2 Listing Label Information/Location Model Name: ___________________________________________ Date purchased/installed: __________________ Serial Number: __________________________________________ Location on fi replace: _____________________ Dealership purchased from: __ ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 3

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 3 Safety Alert Key: • DANGER! Indicates a hazardous situation which, if not avoided will result in death or serious injury . • W ARNING! Indicates a hazardous situation which, if not avoided could result in death or serious injury . • CAUTION! Indicates a hazardous ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 4

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 4 Î = Contains updated information. 13 Finishing A. Mantel and Wall Projections . . . . . . . . . . . . . . . . . . . . . . . 51 B. Facing Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 C. Doors . . . . . . . . . . . . . . . . . . . . . . . ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 5

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 5 B. Limited Lifetime W arranty Î ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 6

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 6 B. Limited Lifetime W arranty (continued) Î ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 7

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 7 B. T empered Glass Speci fi cations Hearth & Home T echnologies appliances manufactured with tempered glass may be installed in hazardous loca- tions such as bathtub enclosures as de fi ned by the Con- sumer Product Safety Commission (CPSC). The tempered glass has ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 8

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 8 H. Requirements for the Commonwealth of Massachusetts For all side wall horizontally vented gas fueled equipment installed in every dwelling, building or structure used in whole or in part for residential purposes, including those owned or operated by the Commonwealth a ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 9

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 9 Figure 2.1 General Operating Parts B. Y our Fireplace W ARNING! DO NOT operate fi replace before read- ing and understanding operating instructions. Failure to operate fi replace according to operating instructions could cause fi re or injury . DECORA TIVE DOORS (NOT ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 10

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 10 D. Clear Space W ARNING! DO NOT place combustible objects in front of the fi replace or block louvers. High temperatures may start a fi re. See Figure 2.2. Avoid placing candles and other heat-sensitive objects on mantel or hearth. Heat may damage these objects. Figu ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 11

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 1 1 I. Lighting Instructions (IPI) The IPI system may be operated with two D-cell batteries. When using batteries, unplug the transformer . T o prolong battery life, remove them when using the transformer . 1. Turn off all electric power to the appliance. 2. This applianc ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 12

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 12 J. Lighting Instructions (Standing Pilot) 1. Turn of f all electric power to the appliance if ser- vice is to be performed. 2. Open control access panel. 3. Move switch to “OFF” position. 4. Push in gas control knob slightly and turn clock- wise to OFF”. DO NOT f ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 13

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 13 Initial Break-in Procedure • The fireplace should be run three to four hours continuously on high. • T urn the fi replace off and allow it to completely cool. • Remove fi xed glass assembly . See Section 14.G. • Clean fi xed glass assembly . See Section 3. ? ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 14

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 14 Glass Cleaning Frequency: Seasonally By: Homeowner T ools Needed : Protective gloves, glass cleaner , drop cloth and a stable work surface. CAUTION! Handle fi xed glass assembly with care. Glass is breakable. • Avoid striking, scratching or slamming glass • Avoid ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 15

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 15 V enting Frequency: Seasonally By: Homeowner T ools needed: Protective gloves and safety glasses. • Inspect venting and termination cap for blockage or obstruction such plants, bird nests, leaves, snow , debris, etc. • V erify termination cap clearance to subsequen ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 16

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 16 (Either cobrahead or SIT) Figure 3.1 IPI Pilot Flame Patterns Figure 3.2 Standing Pilot Flame Patterns ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 17

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 17 A. T ypical Appliance System NOTICE: Illustrations and photos re fl ect typical installations and are for design purposes only . Illustrations/diagrams are not drawn to scale. Actual product may vary from pictures in manual Figure 4.1 T ypical System CEILING FIRESTOP ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 18

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 18 B. Design and Installation Considerations Heat & Glo direct vent gas appliances are designed to operate with all combustion air siphoned from outside of the building and all exhaust gases expelled to the outside. No additional outside air source is required. Instal ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 19

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 19 5 5 F raming and Clearances A. Selecting Appliance Location When selecting a location for the appliance it is important to consider the required clearances to walls (see Figure 5.1). W ARNING! Risk of Fire or Burns! Provide adequate clearance around air openings and fo ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 20

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 20 B. Constructing the Appliance Chase A chase is a vertical box-like structure built to enclose the gas appliance and/or its vent system. In cooler climates the vent should be enclosed inside the chase. NOTICE: T reatment of ceiling fi restops and wall shield fi restop ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 21

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 21 D. Mantel and W all Projections W ARNING! Risk of Fire! Comply with all minimum clear- ances as speci fi ed. Framing or fi nishing material closer than the minimums listed must be constructed entirely of noncom- bustible materials (i.e., steel studs, concrete board, ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 22

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 22 A. V ent T ermination Minimum Clearances Roof Pitch H (Min.) Ft. Flat to 6/12...........................................................1.0* Over 6/12 to 7/12 .................................................1.25* Over 7/12 to 8/12 ..................................... ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 23

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 23 O N P R Q V = VENT TERMINAL X = AIR SUPPL Y INLET = AREA WHERE TERMINAL IS NOT PERMITTED Figure 6.3 Minimum Clearances for T ermination A = 12 inches................. clearances above grade, ver anda, porch, deck or balcony B = 12 inches................. clearances to ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 24

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 24 A. Approved Pipe This appliance is approved for use with Hearth & Home T echnologies DVP or SLP venting systems. Refer to Sec- tion 16B for vent component information. DO NOT mix pipe, fi ttings or joining methods from differ- ent manufacturers. The pipe is tested ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 25

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 25 INST ALLED HORIZONT ALL Y H 1 H 2 V 1 H 1 V 1 Figure 7.3 Figure 7.4 T op V ent - Horizontal T ermination T op V ent - Horizontal T ermination One Elbow T wo Elbows Note: For corner installations: A 6 inch (152 mm) section of straight pipe may need to be attached to the ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 26

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 26 Figure 7.5 T op V ent - Horizontal T ermination - (continued) Three Elbows H 2 H 1 V 2 V 1 V 1 Min. H 1 Max. V 2 Min. H 2 Max. Elbow only 2 ft. 610 mm 0 in. 0 mm 1 ft. 305 mm 6 in. 152 mm 3 ft 914 mm 6 in. 152 mm 2 ft. 610 mm 1 ft. 305 mm 6 ft. 1.8 m 1 ft. 305 mm 6 ft. ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 27

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 27 EXHAUST SHIELD FLUE RESTRICTOR T op V ent - V ertical T ermination No Elbow Figure 7.6 Note: If installing a vertical vent/ termination off the top of the ap- pliance, the fl ue restrictor should be used. V 1 V 1 = 40 ft. Max. (12.4 m) V 1 = 3 ft. Min. (914 mm) Flue R ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 28

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 28 H 1 V 1 V 2 T op V ent - V ertical T ermination (continued) Figure 7.1 1 T wo Elbows Figure 7.10 4. Center the Flue Restrictor on vent and secure in place by using two self-tapping screws (see Figure 7.10). 5. Reinstall the Exhaust Shield. 3. Match the amount of vertic ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 29

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 29 Figure 7.12 T op V ent - V ertical T ermination - (continued) Three Elbows INST ALLED HORIZONT ALL Y H 1 H 2 V 1 V 2 V 1 H 1 + H 2 V 2 V 1 + V 2 Minimum H 1 + H 2 Maximum Elbow only 1 ft. 305 mm * * * 1 ft. 305 mm 6 in. 152 mm 2 ft. 610 mm * * * 2 ft. 610 mm 1 ft. 305 ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 30

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 30 Rear V ent - Horizontal T ermination Figure 7.13 Figure 7.14 No Elbow One 45º Elbow H 1 H 1 H 1 = 16 in. (406 mm) Maximum Do not use a 45º elbow in corner installations. Use two 90º elbows instead. ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 31

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 31 INSTALLED HORIZONTALLY H 3 H 1 H 2 V 1 Rear V ent - Horizontal T ermination - (continued) T wo Elbows Figure 7.15 Figure 7.16 Three Elbows H 1 H 2 V 1 H 1 Maximum V 1 Minimum H 2 H 1 + H 2 Maximum 1 ft. 305 mm Back to Back 90º Elbows 1 ft. 305 mm 2 ft. 610 mm 2 ft. 61 ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 32

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 32 Rear V ent - V ertical T ermination One Elbow Figure 7.17 T wo Elbows Figure 7.18 H 1 V 1 INST ALLED HORIZONT ALL Y H 1 H 2 V 2 V 1 Minimum H 1 Maximum 6 in. 152 mm 2 ft. 610 mm 1 ft. 305 mm 3 ft. 914 mm 2 ft. 610 mm 5 ft. 1.5 m 3 ft. 914 mm 7 ft. 2.1 m 4 ft. 1.2 m 8 f ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 33

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 33 Rear V ent - V ertical T ermination - (continued) Three Elbows Figure 7.19 Three Elbows Figure 7.20 INST ALLED HORIZONT ALL Y H 3 H 1 H 2 V 1 V 2 V 1 H 2 H 1 H 1 H 2 H 3 V 1 Minimum H 1 + H 2 + H 3 Maximum *** 8 ft. 2.4 m 6 ft. 1.8 m *** 9 ft. 2.7 m 7 ft. 2.1 m *** 10 ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 34

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 34 A* B* 10 in. 12 in. C D 10 in. 12 in. A. Pipe Clearances to Combustibles W ARNING! Risk of Fire! Maintain air space clearance to vent. DO NOT pack insulation or other combustibles: • Between ceiling fi restops • Between wall shield fi restops • Around vent syst ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 35

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 35 C. Install the Ceiling Firestop A ceiling fi restop MUST be used between fl oors and attics. • DVP pipe only - Frame an opening 10 in. by 10 in. (254 mm by 254 mm) whenever the vent penetrates a ceiling/ fl oor (see Figure 8.3). • SLP pipe only - Frame opening 9 ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 36

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 36 D. Install Attic Insulation Shield W ARNING! Fire Risk. DO NOT allow loose materials or insulation to touch vent. Hearth & Home T echnologies Inc. requires the use of an attic shield. The National Fuel Gas Code ANSI Z223.1 and NFPA 54 requires an attic shield const ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 37

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 37 CAUTION! Risk of Cuts, Abrasions or Flying Debris. Wear protective gloves and safety glasses during instal- lation. Sheet metal edges are sharp. NOTICE: Once appliance is set up for top or rear venting, it CANNOT be changed at a later time. A. T op V ent 9 9 Appliance ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 38

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 38 B. Rear V ent CAUTION! Risk of Cuts, Abrasions or Flying Debris. Wear protective gloves and safety glasses during instal- lation. Sheet metal edges are sharp. NOTICE: Once appliance is set up for top or rear venting, it CANNOT be changed at a later time. Figure 9.6 T o ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 39

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 39 Figure 9.12 Non-combustible Board C. Installing the Non-combustible Board The factory supplied non-combustible board spans the distance from the top of the fi replace to the center of the framing header . This board must be used. See Figure 9.12. HEADER HEADER D. Secu ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 40

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 40 1 0 10 Inst all ing V ent Pipe (D VP and SLP P ipe ) A. Assemble V ent Sections (DVP Pipe Only) Attach V ent to the Firebox Assembly Note: Th e end of the pipe sec tions with t he lanced ta bs will face toward the applianc e. Attach the fi rst pipe section to the star ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 41

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 41 B. Assemble V ent Sections (SLP Pipe Only) T o attach the fi rst vent component to the starting collars of the appliance: • Attach a DVP-2SL or DVP-SLP24 adapter to the starting collar of the appliance. • Lock the vent components into place by sliding the pipe sec ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 42

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 42 120º Figure 10.8 Securing V ertical Pipe Sections 120º Figure 10.9 Securing Horizontal Pipe Sections E. Disassemble V ent Sections • Rotate either section (see Figure 10.10) so the seams on both pipe sections are aligned as shown in Figure 10.1 1. • Pull carefull ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 43

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 43 F . Install Decorative Ceiling Components (SLP only) A decorative ceiling thimble can be installed on a fl at ceil- ing through which the vent passes. The decorative ceiling thimble is used to cover the fi restop. • Seal the gap between the vent pipe and fi restop ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 44

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 44 G. Install Metal Roof Flashing • See minimum vent heights for various pitched roofs (Figure 10.14) to determine the length of pipe to extend through the roof. • Slide the roof fl ashing over the pipe sections extending through the roof as shown in Figure 10.15. Ro ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 45

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 45 SCREWS CAULK STORM COLLAR (1 of 3) Figure 10.18 Figure 10.18 TERMINA TION CAP I. Install V ertical T ermination Cap • Attach the vertical termination cap by sliding the inner collar of the cap into the inner fl ue of the pipe section while placing the outer collar o ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 46

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 46 Figure 10.20 Venting through the wall INTERIOR HEA T SHIELD OR EXTENDED HEA T SHIELD W ALL SHIELD FIRESTOP HEA T SHIELD 1-1/2 IN. (38 MM) MIN. OVERLAP SHEA THING VENT DEPTH FROM BACK OF APPLIANCE T O OUTSIDE SURF ACE OF EXTERIOR W ALL (SEE CHART BELOW) SLIP SECTION CAN ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 47

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 47 A. Fuel Conversion • Make sure the appliance is compatible with available gas types. • Conversions must be made by a qualified service technician using Hearth & Home T echnologies speci fi ed and approved parts. B. Gas Pressure • Optimum appliance performanc ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 48

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 48 Figure 12.1 Ignitor Button C. Standing Pilot Ignition System Wiring • The standing pilot ignition system wiring does not require a 1 10 V AC supply to operate. See Figure 12.3 • A 1 10 V AC junction box MUST be installed for use with a fan or remote control. See Fi ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 49

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 49 E. Electrical Service and Repair W ARNING! Risk of Shock! Label all wires prior to dis- connection when servicing controls. Wiring errors can cause improper and dangerous operation. V erify proper operation after servicing. Figure 12.2 IntelliFire Pilot Ignition (IPI) ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 50

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 50 G. W all Switch Installation for Fan (Optional) If the box is being wired to a wall mounted switch for use with a fan (See Figure 12.5): • The power supply for the appliance must be brought into a switch box. • The power can then be supplied from the switch box to ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 51

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 51 1 3 13 Fi nishing A. Mantel and W all Projections W ARNING! Risk of Fire! Comply with all minimum clear- ances as speci fi ed. Framing closer than the minimums list- ed must be constructed entirely of noncombustible materials (i.e., steel studs, concrete board, etc.). ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 52

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 52 C. Doors Only doors certi fi ed for use with this appliance model may be used. Contact your dealer for a list of doors that may be used. Once you have determined what kind of door and fi nishing material is going to be used on the fi replace, you may use the table b ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 53

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 53 A. Remove Fixed Glass Assembly See Section 14.G. B. Remove the Shipping Materials Remove shipping materials from inside or underneath the fi rebox. C. Clean the Appliance Clean/vacuum any sawdust that may have accumulated inside the fi rebox or underneath in the cont ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 54

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 54 F . Install the Log Assembly LOG ASSEMBL Y : LOGS-6000BE 1. Release four glass clips and set the glass assembly aside. NOTE: See Step 9 when replacing the log set in an existing fi replace. 2. Carefully cut the cable tie holding the log assembly in place and discard t ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 55

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 55 5. The grate is located in the lower cavity . Remove the screw holding the grate in place and discard the screw . 6. Position the grate into the cutout in the refractory . Hook the grate into position using the tabs on the bottom of the grate. Make sure the grate is pu ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 56

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 56 Figure 14.2 Fixed Glass Assembly G. Fixed Glass Assembly W ARNING! Risk of Asphyxiation! Handle fi xed glass assembly with care. Inspect the gasket to ensure it is undamaged and inspect the glass for cracks, chips or scratches. • DO NOT strike, slam or scratch glass ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 57

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 57 A. Standing Pilot Ignition System 1 5 15 T roubleshooting With proper installation, operation, and maintenance your gas appliance will provide years of trouble-free service. If you do experience a problem, this troubleshooting guide will assist a quali fi ed service t ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 58

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 58 T roubleshooting (continued) Symptom Possible Cause Corrective Action 3. (Continued) C. V alve. T urn the valve knob to the ON position. Place the ON/ OFF switch in the ON position. T ake a reading with a millivolt meter at the thermopile terminals. The millivolt meter ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 59

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 59 B. IntelliFire Ignition System Symptom Possible Cause Corrective Action 1. Pilot won’t light. The ignitor/module makes noise, but no spark. A. Incorrect wiring. V erify “S” wire (white) for sensor and “I” wire (orange) for ignitor are connected to correct ter ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 60

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 60 IntelliFire Ignition System - (continued) Symptom Possible Cause Corrective Action 4. Pilot lights but contin- ues to spark, and main burner will not ignite. (If the pilot continues to spark after the pilot fl ame has been lit, fl ame recti fi cation has not occurre ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 61

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 61 1 6 16 Reference Materials A. Appliance Dimension Diagram Dimensions are actual appliance dimensions. Use for reference only . For framing dimensions and clearances refer to Section 5. Figure 16.1 Appliance Dimensions A D B C H ELECTRICAL ACC ESS G F E GAS LINE ACC ESS ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 62

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 62 B. V ent Components Diagrams Figure 16.2 DVP vent components 10-1/2 in. (267 mm) 10-7/8 in. (276 mm) 45 ° 7-3/8 in. (187 mm) 11-3/8 in. (289 mm) 1-1/4 in. (32 mm) 9-1/4 in. (235 mm) 13-1/4 in. (337 mm) 1/2 in. TYP DVP90ST (90° Elbow) 10 in. (254 mm) 10 in. (254 mm) 1 ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 63

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 63 DVP-HPC1 DVP-HPC2 DVP-TRAP1 DVP-TRAP2 DVP-TRAPK2 DVP-TRAPK1 DVP-TRAP Horizontal T ermination Cap 15-1/8 in. (384 mm) 12 in. (305 mm) 8 in. (203 mm) Max Effective Length Note: Heat shields MUST overlap by a minimum of 1-1/2 in. (38 mm). The heat shield is designed to be ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 64

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 64 13-1/4 in. (367 mm) 24-5/8 in. (625 mm) 27-1/2 in. (127 mm) RF6M Roof Flashing Multi-pak 31 in. (787 mm) 24-5/8 in. (625 mm) 13-1/4 in. (367 mm) RF12M Roof Flashing Multi-pak BEK Trap Ca p Brick Extension 13-3/4 in. (349 mm) 5 in. (127 mm) 13-3/4 in. (349 mm) Cap Shiel ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 65

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 65 DVP-TB1 BasementVent Cap 12 in. (305 mm) 1-1/2 in. (38 mm) 7-3/8 in. (187 mm) 14 in. (356 mm) 17-3/4 in. (451 mm) 7-1/4 in. 12 in. 305 mm (184 mm) 5-1/4 in. (133 mm) 12-1/2 in. (318 mm) DVP-TVHW VerticalTermination Cap (Highwind) PVK-80 (For use with IPI and DSI applia ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 66

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 66 B. V ent Components Diagrams (continued) DVP-HRC-SS DVP-HRC-ZC-SS HORIZONT AL TERMINA TION CAP 13 in. (330 mm) 15 in. (381 mm) 8-1/8 in. (206 mm) 10-7/8 in. 276 mm 10-1/2 in. 267 mm 3° 87° Effective Length 5-3/4 to 8-3/8 in. 146 to 213 mm 5-1/2 in. 140 mm 8-3/8 in. 2 ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 67

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 67 B. V ent Components Diagrams (continued) Figure 16.7 SLP Series V ent Components Effective Height/Length Pipe inches mm SLP4 4 102 SLP6 6 152 SLP12 12 305 SLP24 24 610 SLP36 36 914 SLP48 48 1219 SLP6A 2 - 6 51 - 152 SLP12A 2 - 12 51 - 305 8-3/4 in. 222 mm 6-1/2 in. 165 ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 68

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 68 B. V ent Components Diagrams (continued) Figure 16.8 SLP Series V ent Components SLP-SNKD Snorkel T ermination Cap SLP-TVHW Ve r t i c a l T ermination Cap SLP-CCS-BK Cathedral Ceiling Support Box-Black SLP-DCF-BK Ceiling Firestop Black SLP-WT - BK W all Thimble-Black ...

  • Heat & Glo LifeStyle BE-41IPILPC - page 69

    Heat & Glo • BE-41C / LP , BE-41IPIC / LP • 2105-900 Rev . P • 6/09 73 Heat & Glo, a brand of Hearth & Home T echnologies Inc. 7571 215 th Street West, Lakeville, MN 55044 www .heatnglo.com D. Contact Information Please contact your Heat & Glo dealer with any questions or concerns. For the location of your nearest Heat & G ...

Fabricant Heat & Glo LifeStyle Catégorie Indoor Fireplace

Les documents que nous recevons du fabricant de l'appareilHeat & Glo LifeStyle BE-41IPILPC peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Heat & Glo LifeStyle
- manuels d’utilisations BE-41IPILPC
- fiches produit Heat & Glo LifeStyle
- dépliants
- ou étiquettes-énergie Heat & Glo LifeStyle BE-41IPILPC
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Heat & Glo LifeStyle BE-41IPILPC.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Heat & Glo LifeStyle BE-41IPILPC, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Heat & Glo LifeStyle BE-41IPILPC. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Heat & Glo LifeStyle BE-41IPILPC.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Heat & Glo LifeStyle BE-41IPILPC, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Heat & Glo LifeStyle BE-41IPILPC par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Heat & Glo LifeStyle BE-41IPILPC.

Le manuel d’utilisation complet Heat & Glo LifeStyle, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Heat & Glo LifeStyle BE-41IPILPC - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Heat & Glo LifeStyle BE-41IPILPC, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lHeat & Glo LifeStyle BE-41IPILPC qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Heat & Glo LifeStyle BE-41IPILPC - qui devraient nous aider dans les premières étapes lors de l'utilisation Heat & Glo LifeStyle BE-41IPILPC
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Heat & Glo LifeStyle BE-41IPILPC
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Heat & Glo LifeStyle BE-41IPILPC dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Heat & Glo LifeStyle BE-41IPILPC?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Heat & Glo LifeStyle BE-41IPILPC, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Heat & Glo LifeStyle BE-41IPILPC il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)