Français dropdown-ico

Manuel d’utilisation LevelOne FCS-3091

139 pages Non applicable
Télécharger

Aller à la page of 139

Summary
  • LevelOne FCS-3091 - page 1

    IP CamSecure User Manual Ver : 1.28-101228 Copyright (c) 201 1 Digital Data Communications Co., Ltd. All Rights Reserved. All features and functions are subject to chan ge without notice. Please visit www .level1.com fo r the latest ones. ...

  • LevelOne FCS-3091 - page 2

    Intell igent Surveillance So lution LevelOne IP CamSecure - 1 - TABLE OF CONTENTS TABLE OF CONTENTS ........................................................................................................................ 1 INSTALLATION .................................................................................................................. ...

  • LevelOne FCS-3091 - page 3

    Intell igent Surveillance So lution LevelOne IP CamSecure - 2 - 2.2.5 Event Type ......................................................................................................................... .......................... 36 2.2.6 Time Table .................................................................................................... ...

  • LevelOne FCS-3091 - page 4

    Intell igent Surveillance So lution LevelOne IP CamSecure - 3 - 4.2.3 Action Typ e - Play Sound .......................................................................................................................... 64 4.2.4 Action Typ e - Send E-mail ............................................................................................... ...

  • LevelOne FCS-3091 - page 5

    Intell igent Surveillance So lution LevelOne IP CamSecure - 4 - 7. LOG VIEWER ................................................................................................................................ 94 7.1 Unus ual Event ......................................................................................................................... ...

  • LevelOne FCS-3091 - page 6

    Intell igent Surveillance So lution LevelOne IP CamSecure - 5 - 1.3 Verify Image/Video ............................. ....................................................................................................... 115 B. License Management To ol ............................................................................. ................... ...

  • LevelOne FCS-3091 - page 7

    Intell igent Surveillance So lution LevelOne IP CamSecure - 6 - Inst allatio n Minimum System Requirement Total FPS at CIF 2200~1400 1400~1050 1050~550 550~ CPU Intel Core I7 Intel Core I5 Intel Core 2 Q u ad Q9400 Intel Core 2 Duo E5300 RAM 2GB 2GB 2GB 1GB Motherboard Intel 55 or 57 c h ip or a bove, MB v e ndor Asus, Gigabyt e or Intel w ith Int ...

  • LevelOne FCS-3091 - page 8

    Intell igent Surveillance So lution LevelOne IP CamSecure - 7 - Inst all IP camera(s) S tep 1: Set up the IP camera referring to the quick installation guide provided. S tep 2: Check the network between the IP camera and the system. S tep 3: Add the IP cam era to the system. See details on later pages. Inst all capture card(s) S tep1: Insert the ca ...

  • LevelOne FCS-3091 - page 9

    Intell igent Surveillance So lution LevelOne IP CamSecure - 8 - INSTALLATION The Installation CD contains the software you need to run the complete system. If you are installing the system on multiple PCs, i nstall the appropriate softw are for each PC: - Server Application: All fu nctions of IP CamSecure systems including MainConsole, Playback, Re ...

  • LevelOne FCS-3091 - page 10

    Intell igent Surveillance So lution LevelOne IP CamSecure - 9 - IP CamSecure Installatio n Step 1: Insert the Installat ion CD. Run autorun.exe from the CD-ROM directly to start the installat ion. Step 2 : The setup page should be loade d automatically. If it does not, please select your CD-ROM drive manually to open the setup page. Click “IP Cam ...

  • LevelOne FCS-3091 - page 11

    Intell igent Surveillance So lution LevelOne IP CamSecure - 10 - Step 4: Select Next to continue . Step 5: Check the option I accept the terms of the license agreement , select Next to continue . Step 6: Enter the appropriate information, select Next to c ontinue. Step 7: Cho ose Complete or Custom setup type. ...

  • LevelOne FCS-3091 - page 12

    Intell igent Surveillance So lution LevelOne IP CamSecure - 11 - COMPLETE SETUP T YPE Installs all program features into the default direct ory . Check Complete , and the n select Next . All program features will be installed. [COMPLETE SETUP requires the most disk space.] CUSTOM SETUP T YPE Allows y ou to install the system to a preferred director ...

  • LevelOne FCS-3091 - page 13

    Intell igent Surveillance So lution LevelOne IP CamSecure - 12 - Remote Desktop Tool Remote Desktop Too l allow user remote to access Main Cons ole System and setup configuration . Step 1 : Insert the Installati on CD . Run autor un.exe f rom the CD-ROM directly (L evelOne-Pro-1.xx .x /RemoteDesktopViewer) to start the installat ion. Step 2: Select ...

  • LevelOne FCS-3091 - page 14

    Intell igent Surveillance So lution LevelOne IP CamSecure - 13 - Step 6: Select Complete or Custom setup type . COMPLETE SETUP T YPE Install all program features into the default direct ory . Check Complete , and the n select Next . All program features will be installed. [Requires the mo st disk space.] CUSTOM SETUP T YPE Install the system to a p ...

  • LevelOne FCS-3091 - page 15

    Intell igent Surveillance So lution LevelOne IP CamSecure - 14 - Step 8 : S elect Finish after installing the system com pletely. ...

  • LevelOne FCS-3091 - page 16

    Intell igent Surveillance So lution LevelOne IP CamSecure - 15 - PDA Client Installation Step 1 : Connect PDA device to the PC. Step 2 : Insert the installation CD, click PDA Client I nstallation from the CD-R OM directly (LevelOne-Pr o-1.xx.x /PDA_ Client) to automatically install the clien t application in device. Note : If you do not have Micros ...

  • LevelOne FCS-3091 - page 17

    Intell igent Surveillance So lution LevelOne IP CamSecure - 16 - Smart Phone Client Install ation Step 1 : Connect Smart Phone device to the PC . Step 2 : Insert the installation CD, click Smart Phone Client Installation from the CD-R OM directly (LevelOne-Pr o-1.xx. x /SP_Client)to automatically install the client ap plication in device. Note : If ...

  • LevelOne FCS-3091 - page 18

    Intell igent Surveillance So lution LevelOne IP CamSecure - 17 - iPhone Client Installation Requirements: Compatible with iPhone, iPod touch, and iPad. Requires iOS 3. 0 or later Main console Step 1 : T o see live view on yo ur iPhone, y ou must enable live streaming service in main console. 1.) Go to network services 2.) S tart Live S tr eaming 3. ...

  • LevelOne FCS-3091 - page 19

    Intell igent Surveillance So lution LevelOne IP CamSecure - 18 - ...

  • LevelOne FCS-3091 - page 20

    Intell igent Surveillance So lution LevelOne IP CamSecure - 19 - iPhone Please go to iTunes store ( AppStore on iphone ) to download Level1 iCamS ecure 1.) Open AppS t ore 2.) Search for iCam Secure 3.) Install iCamSecur e 4.) Run iCam Secure and input server i nfo ...

  • LevelOne FCS-3091 - page 21

    Intell igent Surveillance So lution LevelOne IP CamSecure - 20 - iPhone Screenshots Notes : if use free bundle IP CamSec ure software, it only support 1-CH re mote live view, if you want to select different cannel, it must to change the server’s setting., ...

  • LevelOne FCS-3091 - page 22

    Intell igent Surveillance So lution LevelOne IP CamSecure - 21 - Quick Start Execute Main Console Step 1 : Go to Start > All Programs > Surveillance System > Main Console to execute Main Console. Step 2: Enter your own password into the edit box, enter it again for double confirm and then click on OK . Activate IP Camera License(s) Step 1 ...

  • LevelOne FCS-3091 - page 23

    Intell igent Surveillance So lution LevelOne IP CamSecure - 22 - Install IP camera(s) Step 1 : S etup the IP camera(s) b y referring to the user manual provided by the IP camera manufacturer. Step 2: Make sure you ca n access this camera through IE browser. Step 3 : Ad d the IP camera(s) to the system b y following the steps below. Add IP camera(s) ...

  • LevelOne FCS-3091 - page 24

    Intell igent Surveillance So lution LevelOne IP CamSecure - 23 - Set Schedule Step 1: Execute Main Conso le. Step 2: Type in user name and password . Step 3: Select Schedule . Step 4: The defa ult schedule is “always record' when a camera is newly inserted. Step 5 : Choose a camer a and then select Configure or just double click on the sched ...

  • LevelOne FCS-3091 - page 25

    Intell igent Surveillance So lution LevelOne IP CamSecure - 24 - Step 4 Start Recording & Smart Guard Step 1 : Execute Main Co nsole. Step 2 : T ype in user name and password and log in the system. Step 3 : Click on Start . Step 4: Click on Start R ecoding Schedule and Start Smart Guard System to enable the two functions. Playback Step 1: Execu ...

  • LevelOne FCS-3091 - page 26

    Intell igent Surveillance So lution LevelOne IP CamSecure - 25 - 1. Main Console This is the main operating system - to activate schedule recording, setup smart guard and configure system setting. ...

  • LevelOne FCS-3091 - page 27

    Intell igent Surveillance So lution LevelOne IP CamSecure - 26 - 1.1 User Interfac e Overview Exit: Shut down the Surveillance System or log out current user . Minimize: Minimize the Main Console window. Screen Division: Allocate the sub-scr een display by clicking on the desired layout icon. To switch to single camera display, doub le click on a p ...

  • LevelOne FCS-3091 - page 28

    Intell igent Surveillance So lution LevelOne IP CamSecure - 27 - Note: To customi ze Information about window’s setting, go to C onfig - Setting - General - Status Display. Select Advanced Se tting for further information like Temperature, Fan speed, System Reso urce and Network Utilization. Start: Click on the Start icon and select from the drop ...

  • LevelOne FCS-3091 - page 29

    Intell igent Surveillance So lution LevelOne IP CamSecure - 28 - Config: Select from the drop do wn menu to modify the general settings, user account settings, save / load configuration settings, open License Manager, edit counting applica tion and POS application, access log viewer and backup files, or setup network services . See Config on page 6 ...

  • LevelOne FCS-3091 - page 30

    Intell igent Surveillance So lution LevelOne IP CamSecure - 29 - 1.3 On Screen Menu Right click on the camera screen and get the On Screen Menu, from which you can quickly adjust the setting of camera. 1.3.1 Enabl e Move/Area Zoom With cameras that support PT function, click the Enable Move function to adjust the current camera’s view by clicking ...

  • LevelOne FCS-3091 - page 31

    Intell igent Surveillance So lution LevelOne IP CamSecure - 30 - The square flashing on the video grid indicate the correspondent view ratio of the camera. 1.3.10 Fix Aspect Rati o For some special camera re solution, user can ena ble Fix Aspect Ratio to view original ratio video, or disable this option to stretch 3:4 to fit window. 1.3.11 Instant ...

  • LevelOne FCS-3091 - page 32

    Intell igent Surveillance So lution LevelOne IP CamSecure - 31 - 1.5 Instant Playba ck * not available under Lite License Instant Playback function allows yo u to play the last few minutes of any live video channel. Simply r ight click on Live Channel and select Instant Playback to access the recorded video. 1.5.1 Instant Playback wi ndow ov erview ...

  • LevelOne FCS-3091 - page 33

    Intell igent Surveillance So lution LevelOne IP CamSecure - 32 - To take snapshots of a video clip: Pause the video in image which you want to export and click the snapshot button . The snapshot is displayed and can be saved or c opied to clipboard. To export recorded video: Select export period, click the export button , and setup the options of e ...

  • LevelOne FCS-3091 - page 34

    Intell igent Surveillance So lution LevelOne IP CamSecure - 33 - 2. Playba ck Watch the recorded video, view and/or search for unus ual events and recorded system information. *There is only 1 channel displayed in Playback in IP CamSecure Lite while there are up to 16 channels displayed in IP CamSecure Pro/Pro Plus simultaneously. ...

  • LevelOne FCS-3091 - page 35

    Intell igent Surveillance So lution LevelOne IP CamSecure - 34 - 2.1 User Interfac e overvie w: Minimize: Minimize the Playback console. Exit: Shut down the Playback console. Scroll bar: Indicates the status of the playing video; drag it to where you want to review. Information Window: Display time and date, video status, c ue in/ out time points a ...

  • LevelOne FCS-3091 - page 36

    Intell igent Surveillance So lution LevelOne IP CamSecure - 35 - On Screen Menu: Toggle Fullscreen : Select to view cameras under full screen . Press “Esc” or right click to go back to original view. Enable ImmerVision PTZ : Ad just PTZ in PTZ mode . ( Depend on device) ImmerVision Lens Setting : Select the mode of lens, original, PTZ mode , Qu ...

  • LevelOne FCS-3091 - page 37

    Intell igent Surveillance So lution LevelOne IP CamSecure - 36 - 2.2 Open Re cord / Date T ime Search Dialog Click on the Open Record / Date Tim e Search Dialog button to access the Date-Time Panel and withdraw the video record tha t you want to review. 2.2.1 Dat e Time Panel 2.2.2 R ecord Display Window The record display window shows the informat ...

  • LevelOne FCS-3091 - page 38

    Intell igent Surveillance So lution LevelOne IP CamSecure - 37 - 2.2.6 Tim e Table  Utilize the icon to select all channels; also utilize the icon to deselect all channels. Finally, utilize the scale bar to modify the scale of the time table.  Selecting “Show Records” makes Time Table show the period of rec ording data as below:  Selec ...

  • LevelOne FCS-3091 - page 39

    Intell igent Surveillance So lution LevelOne IP CamSecure - 38 - Step 5: Click the camera name to incre ase or decrease cameras y ou want to playback. Step 6: Click OK when setting is complete. 2.3 Search Mod e Click on the Search Mode icon to obtain the In telligent Search Tool panel. * This feature is not ava ilable under Lite License.  In tel ...

  • LevelOne FCS-3091 - page 40

    Intell igent Surveillance So lution LevelOne IP CamSecure - 39 - 2.3.3 Unusual Event-Missing Object  Missing Object: Detectio n of selected objects removed from the defined area on the screen.  Define detection zone: Left click and drag to draw a detection zone. The search tool will detect selected objects remove d in this zone.  Sensitivi ...

  • LevelOne FCS-3091 - page 41

    Intell igent Surveillance So lution LevelOne IP CamSecure - 40 - Step 3: Click on the Save Video button , choo se the folder where you want to save the file at, enter t he file name and click SAVE . Step 4: Set the Export Format ( A SF recommend ) and set the Use Profile.  ASF – more efficient than AVI format. [R ecommended format]  AVI (Mi ...

  • LevelOne FCS-3091 - page 42

    Intell igent Surveillance So lution LevelOne IP CamSecure - 41 - 2.7 Print Click on the Print button to print t he current image of the video you cho ose. Print Content: Print the image from the current selected channel or all the channels shown on the screen. Select to print original view or selected region on camera. Page Setting: Set to print th ...

  • LevelOne FCS-3091 - page 43

    Intell igent Surveillance So lution LevelOne IP CamSecure - 42 - 2.9 Log Vie wer Click on the Log Viewer bu tton to activate the Log Viewer dialog. *IP CamSecure Lite only has System Log option in Log Viewer. 2.9.1 Unusual Event View the unusual event history that had been detected by the Smart Guard System. Step1 Step2 Step 3 Step1: Cho ose the ty ...

  • LevelOne FCS-3091 - page 44

    Intell igent Surveillance So lution LevelOne IP CamSecure - 43 - Select Log Type from the drop-down menu. There are in total 31 types of log types, including: * Note: Some event types will not be available under Lite License. Step1: Cho ose the type of event you want to check or select “All” from the drop-down menu f or all types of events. Ste ...

  • LevelOne FCS-3091 - page 45

    Intell igent Surveillance So lution LevelOne IP CamSecure - 44 - Step 5: Type the file name and ch oose the file format ( .xls or .txt) . ...

  • LevelOne FCS-3091 - page 46

    Intell igent Surveillance So lution LevelOne IP CamSecure - 45 - 2.9.4 Counting Application (Diagram) Display the Counting Ap plication data in diagra m format . * not available under Lite License Step1: Select the channel you want to check or select All from the drop-do wn menu for all channels. Step 2: From the dr op-down menu, set up how you wou ...

  • LevelOne FCS-3091 - page 47

    Intell igent Surveillance So lution LevelOne IP CamSecure - 46 - Step 6: Type the file name and ch oose the file format ( .xls or .txt) . 2.9.6 E xport and Backup Log View the Export and Backup Log history that had been operated by local or remote user. Step1: Cho ose the type of event you want to check or select All from the drop-down menu for all ...

  • LevelOne FCS-3091 - page 48

    Intell igent Surveillance So lution LevelOne IP CamSecure - 47 - 2.10 Setting Click on the General Setting button and go to Setting for system configurations . Record Display setting:  Calendar View: Choose to display records under calendar view.  List Control: Choose to di splay records under che cklist. Play setting:  Play when open: Che ...

  • LevelOne FCS-3091 - page 49

    Intell igent Surveillance So lution LevelOne IP CamSecure - 48 - 2.11 Re mote Server 2.11.1 Add Remote Playback Sit e Press the Remote Ser ver Icon or go to setting – server to config remote playb ack site management to add and setup remote playback sites. Step 1: Enter the IP address or DN S, Port, Username, and Pa ssword. Step 2: Click Add to a ...

  • LevelOne FCS-3091 - page 50

    Intell igent Surveillance So lution LevelOne IP CamSecure - 49 - 3. Sched ule Click on the Schedule icon on the Main Console and set up the time duration for video recording on the schedule configuration panel. ...

  • LevelOne FCS-3091 - page 51

    Intell igent Surveillance So lution LevelOne IP CamSecure - 50 - 3.1 Day / week Mode Load Camera / Channel Day /Week Mode Day Mode: S chedule the cameras to turn the recorder on and off at the same time every day according to your setting. Week Mode: Allows y ou to schedule each camer a for a different day of the week, additionally, yo u may assign ...

  • LevelOne FCS-3091 - page 52

    Intell igent Surveillance So lution LevelOne IP CamSecure - 51 - FCS-8005, 8006 series (Analog camera) Mode Format Time Record FPS Quality Resolution Regular MPEG-4 0:00-24:00 Always 30 Normal CIF Office MPEG-4 8:00-20:00 Alway s 30 Normal CIF Shop MPEG-4 10:00-22 :00 Always 30 Nor mal CIF Highly Secure MPEG-4 0:00-24:00 Alway s 30 Highest Max Disk ...

  • LevelOne FCS-3091 - page 53

    Intell igent Surveillance So lution LevelOne IP CamSecure - 52 - 3.1.2 Insert a New Sch edule Manually Step 1: Left-click and draw the bar you want add to the t ime table. The scheduled time will show as a grey bar. Step 2: Click the Insert icon and add a new schedule in the Regular Mod e, i.e. to r ecord video du ring the time period you set with ...

  • LevelOne FCS-3091 - page 54

    Intell igent Surveillance So lution LevelOne IP CamSecure - 53 - Holiday: You may assign holidays where the syste m will work according to the set ting for Sunday. Note: The d efault Holiday setting will app ly Sunday’s settings. F or the Middle East region where Friday is a holiday, please adju st setting by right click ing on and select “Appl ...

  • LevelOne FCS-3091 - page 55

    Intell igent Surveillance So lution LevelOne IP CamSecure - 54 - 3.3 Encoding Opti on 3.3.1 Pre-record/ Post-record Time The pre-record/ po st-record function saves the recording data accordingly. For instance, to s et up a 5 second pre-record time means the system will start saving the recording data 5 seconds before the event happens. Note: The m ...

  • LevelOne FCS-3091 - page 56

    Intell igent Surveillance So lution LevelOne IP CamSecure - 55 - For IP cameras The Encode Video function will reduce frames or re-encode original streaming from IP cameras. T o save Hard Disk usage, adjust framer ate with original video format or re-encode to smaller file size by adjusting frame rate, resolution and Q uality/Bit rate. Keep Origina ...

  • LevelOne FCS-3091 - page 57

    Intell igent Surveillance So lution LevelOne IP CamSecure - 56 - 4. Guard *Guard is only in IP CamSecure Pro. Click on the Guard button on the Main Console to start the “Event and Action Configuration” panel. You will need to specify an event to be detected as well as set the appropriate acti on for the s ystem when the event occurs. Note: 1. E ...

  • LevelOne FCS-3091 - page 58

    Intell igent Surveillance So lution LevelOne IP CamSecure - 57 - 4.1 Event There are 4 sour ces of ev ents: Camera ( video image), POS, Digital Input (device connected to your PC) and System (condition of your hardware). You can assign multiple events by following the instructions below. * Note: Some event types will not be available under Lite Lic ...

  • LevelOne FCS-3091 - page 59

    Intell igent Surveillance So lution LevelOne IP CamSecure - 58 -  Cancel event after time out xx seconds: Enable checkbox and set the timeout seconds to cancel the event after a specific time whether the event disappears or not. 4.1.3 Cam era Event - Sig nal Lost Detect the loss of video signal from camera. 4.1.4 Cam era Event - Ge neral Motion ...

  • LevelOne FCS-3091 - page 60

    Intell igent Surveillance So lution LevelOne IP CamSecure - 59 - 4.1.5 Cam era Event - For eign Object Alarm will be set off when an object appears in the defined area on the screen. Alarm Event Option:  Sensitivity: Click and move the slider control to the right to increase sensitivity so that minimal movement will trigger the alarm. Move the b ...

  • LevelOne FCS-3091 - page 61

    Intell igent Surveillance So lution LevelOne IP CamSecure - 60 - Alarm Event Option:  Sensitivity: Click and move the slider control to the right to increase sensitivity so that minimal movement will trigger the alarm. Move the bar to the lef t to reduce the sensitivity of m ovement. Setting up the appropriate sensitivity value will reduce the c ...

  • LevelOne FCS-3091 - page 62

    Intell igent Surveillance So lution LevelOne IP CamSecure - 61 - Region Definition:  Define detection zone: To detect Lose Foc us, you have to define a de tecti on zone. Le ft-click and drag the mouse to draw a detection zone. You may define more than one zone on the screen by repeating the same process. U ser can also click on “ All” button ...

  • LevelOne FCS-3091 - page 63

    Intell igent Surveillance So lution LevelOne IP CamSecure - 62 - Step 3: Config ure the setting of the Event Type. Ple ase refer to the POS section of the User man ual. 4.1.10 Digital Input Event - Digital Input Event Step 1 Step 2 Step 1: Click and highlight Digital Input on the event type list, and then click the Insert Even t icon. Step 2: Selec ...

  • LevelOne FCS-3091 - page 64

    Intell igent Surveillance So lution LevelOne IP CamSecure - 63 - 4.1.12 System Event - Disk Space E xhausted This function alar ms yo u w hen disk space is exhausted. 4.1.13 System Event - System Health Unusual This function alar ms yo u w hen CPU is under high temperature or fan speeds are running low. Current Status: Displays current CP U tempera ...

  • LevelOne FCS-3091 - page 65

    Intell igent Surveillance So lution LevelOne IP CamSecure - 64 - To insert a new action: Step 1: Cho ose an event and click the insert action icon . Step 2: There are 1 0 types of actions , select the actions you want and then click OK. 1. On Screen Display 2. Play Sound 3. Send E-mail 4. Phone Call 5. PTZ Preset Go 6. DI/DO 7. Send a SMS Message 8 ...

  • LevelOne FCS-3091 - page 66

    Intell igent Surveillance So lution LevelOne IP CamSecure - 65 - 4.2.5 Action Type - Phone Call The system wi ll call a g iven phone number when an unusual event is detected. * Note: This function is not available under Lite License. Step 1: Se lect the Phone Call action and then clic k OK . Step 2: The resp onding window will popup to Select Conta ...

  • LevelOne FCS-3091 - page 67

    Intell igent Surveillance So lution LevelOne IP CamSecure - 66 - Step 3: Select the device that is connected to your sy stem, that is, the PC you ar e working with. You can enable the Automatically Popup I/O Control Panel check box to obtain the correspondent panel to monitor the I/O status. Note: You should adjust the setting of I/O device in Conf ...

  • LevelOne FCS-3091 - page 68

    Intell igent Surveillance So lution LevelOne IP CamSecure - 67 - Condition of startup – Smart Guard can be started under the follow mode s: 1. Manually start/stop from Start menu or as Main Co nsole startup setting (default) 2. Started by defined D/I trigger. Select D/I from dropdown list and click OK. ...

  • LevelOne FCS-3091 - page 69

    Intell igent Surveillance So lution LevelOne IP CamSecure - 68 - 5. Configuration Click on the Config icon, select from the dr op-down menu and open the Configuration panel. Modify the s etting and access License Manager, Counting application, POS application, Log viewer, Backup, Network Services. Select Save/Load C onfiguration to save/load all th ...

  • LevelOne FCS-3091 - page 70

    Intell igent Surveillance So lution LevelOne IP CamSecure - 69 - 5.1 Setting – Gen eral 5.1.1 Startup Check the Main Console box to execute Main Co nsole system when windows startup. Check the following 3 main functions and 5 network services to auto activate functions when Main Console system is executing, including Schedu le Recording Sy stem, ...

  • LevelOne FCS-3091 - page 71

    Intell igent Surveillance So lution LevelOne IP CamSecure - 70 - if the default storage space is exhausted, the video will be stored to the next directory. 2. If all the status of locations exceeds the storage rule, the system will start recycling in an hour progress.  Only keep video for: Delete the video records that are older than the number ...

  • LevelOne FCS-3091 - page 72

    Intell igent Surveillance So lution LevelOne IP CamSecure - 71 - Synchronize video frames: Select to avoid image tearing problems that m ay occur while CPU loading is increased.  DDNS Service: D ynamic Domain Name Server (DDNS) f unction allows you to use Live View or Web View to connect to th e Main Console through Internet event if you have a ...

  • LevelOne FCS-3091 - page 73

    Intell igent Surveillance So lution LevelOne IP CamSecure - 72 - 5.2 Setting - Ca mera 5.2.1 Add Camera Four function bu ttons will be included in the Se ttin g/Cam era panel if you have o ur Hybrid Sur veillance System license for IP camera. Search: Click on the Search icon for the Searc h IP Camera panel. The system will start scanning automatica ...

  • LevelOne FCS-3091 - page 74

    Intell igent Surveillance So lution LevelOne IP CamSecure - 73 - 5.2.2 I P Camera / Vide o Server Setting pan el Network: Fill in required info o f the Network field (including Name , IP Addre ss, Http Port, User Name, P assword and Protocol) refer ring to the instruction provided by the camera manufacturer. Check “Use D NS” to use domain name ...

  • LevelOne FCS-3091 - page 75

    Intell igent Surveillance So lution LevelOne IP CamSecure - 74 - of the remote live view function. Each profile has different Format, Frame, Res olution, Quality and Bit rate (Kbps) settings. Note: The types of stream profil es and options will differ among stream sources.  IP cameras on NVR IP+ License: 5 profiles including Original (not config ...

  • LevelOne FCS-3091 - page 76

    Intell igent Surveillance So lution LevelOne IP CamSecure - 75 - Advanced Setting I/O Device Setting:  Module Setting: Name the module device and ID that has been connected to the digi tal input/output device(s) to your s ystem.  Device: This column displays the device( s) already installed to the system.  ID: Select the number of the I/O ...

  • LevelOne FCS-3091 - page 77

    Intell igent Surveillance So lution LevelOne IP CamSecure - 76 - Check the box on the camera list to activate the PTZ control f unction of a PTZ camera. Basic Setting: Se lect the camera model, com port, baud rate , and address according to you r PTZ camera. Note : If the camera model is an IP PTZ camera, yo u can work PTZ function directly without ...

  • LevelOne FCS-3091 - page 78

    Intell igent Surveillance So lution LevelOne IP CamSecure - 77 - 5.5 Setting – Hotline *Hotline is only in I P CamSecure Pro. Configure the settings of various co ntacts or devices, including E-mail, FTP, GSM modem and Telephone calls which will be triggered upon event detection. E-mail: Input the following information: Server, Por t, and Sender? ...

  • LevelOne FCS-3091 - page 79

    Intell igent Surveillance So lution LevelOne IP CamSecure - 78 - 5.6 Setting - Address Book Manage the address book from which you ma y send out a phone call or an E-mail when an unusual event is detected. *Address Book is only in I P CamSecure Pro /Pro Plus. 5.7 Setting – Monit or Display Playback Option: Execut e Playback on the secondary m oni ...

  • LevelOne FCS-3091 - page 80

    Intell igent Surveillance So lution LevelOne IP CamSecure - 79 - 5.8 Setting – Jo ystick * Note: This function is not available under Lite license. Function: You can choo se the function from the drop-down menu for the button of the joystick. Note: F ollowing is a complete list of all log types: 1. N/A 2. Goto Preset Point 3. Goto Camera 4. Goto ...

  • LevelOne FCS-3091 - page 81

    Intell igent Surveillance So lution LevelOne IP CamSecure - 80 - 5.9 User Ac count Setting Only default admin account could manage the u ser accounts here. Fr om the list on this tab, highlig ht each account and modify the privilege setting. There are 3 default privilege profiles of account groups:  Admin: Have privileges o f all system function ...

  • LevelOne FCS-3091 - page 82

    Intell igent Surveillance So lution LevelOne IP CamSecure - 81 - Privilege: Check each privilege of f unctions and devices for each us er account.  Function: Check the settings, operation related and system configuration, and the privilege of remote access.*  Device: Check the device privileges of camera, d igital output and POS in MainConsol ...

  • LevelOne FCS-3091 - page 83

    Intell igent Surveillance So lution LevelOne IP CamSecure - 82 - 5.12 Counting Application * Note: This function is not available under Lite license. Camera List Operation Start Simulation Options Runtime *Counting Application is only in IP CamSecure Pro/Pro Plus. Camera List: Select which camera would enable counting application. Operation: Define ...

  • LevelOne FCS-3091 - page 84

    Intell igent Surveillance So lution LevelOne IP CamSecure - 83 - 5.14 N etwork Servic e There are 5 types of network services: Live streaming server, Re mote playback server, 3 GPP service, Remote Desktop, and Central Management Service. Fro m the Main Console, go to Config - Network Service to ob tain the Network Service panel. *IP CamSecure Lite ...

  • LevelOne FCS-3091 - page 85

    Intell igent Surveillance So lution LevelOne IP CamSecure - 84 - Options: Adj ust the setting only when the server is stopped.  Port: As sign a port for the clients to connect to your system via Remote Liv e Viewer. Default port is 5150.  Maximum Connections: Number of connections that are allowed to connect to t he system. Default is 16 chan ...

  • LevelOne FCS-3091 - page 86

    Intell igent Surveillance So lution LevelOne IP CamSecure - 85 - Performance 5.14.2 Remote Pla yback Server When starting the remote playback function, the system allows remote users to log in to the specific computer and withdraw data files t hat are stored on it. As system administrator, user c ould be able to monitor the accounts logging in to m ...

  • LevelOne FCS-3091 - page 87

    Intell igent Surveillance So lution LevelOne IP CamSecure - 86 - Client list:  User Count: Show the nu mber of users that are connecting to system.  Kill Client: Highligh t an IP address and click on the “Kill Client” button to block the cl ient from yo ur client list.  Kill All Clients: Click on this button and then block all t he cli ...

  • LevelOne FCS-3091 - page 88

    Intell igent Surveillance So lution LevelOne IP CamSecure - 87 - 5.14.3 3GPP S ervice When starting the 3GPP service function of you r computer, the sy stem allows remote users to log in and view cameras that are connecting to it wi th 3GPP sup ported mobile phone. See Appendix A for m ore details about 3GPP Service . Client list:  Client Count: ...

  • LevelOne FCS-3091 - page 89

    Intell igent Surveillance So lution LevelOne IP CamSecure - 88 - Options:  Port: As sign a port for Desktop tool to login and configure s ystem.  Disconnect idle clien t aft er (300~36 00 sec): Auto disconnect the on-line user who idled more than set period. Authentication: Enabling this option would only allow admin account to use Desktop to ...

  • LevelOne FCS-3091 - page 90

    Intell igent Surveillance So lution LevelOne IP CamSecure - 89 - 5.15 Ab out Main Console Go to A bout Main Cons ole for detailed system and license information. 5.16 Vide o Source (For s ystem with MPEG4 capture device only, not supported under Lite license) Step 1: Go to Video Sour ce to adjust the Video Standard to NTSC or PAL . Step 2: Adju st ...

  • LevelOne FCS-3091 - page 91

    Intell igent Surveillance So lution LevelOne IP CamSecure - 90 - 6. E-Map With E-Map, users can easily track the actual location of an occurring event, at the moment it happens. The arrow and lightning icons on E-Map represent cameras and I/O devices. These icons will turn red once they are triggered by alarms . To launch the E-Map application, sim ...

  • LevelOne FCS-3091 - page 92

    Intell igent Surveillance So lution LevelOne IP CamSecure - 91 - Edit mode/ Operate m ode Switch button Function button 6.1 Edit Mode All E-map modifications must be configured in Edit Mode. 6.1.1 Add/Edit/Delete Ma p Add E-Map: Step 1 : Click on the switch button to swi tch to Edit mode. Make sure all devices are connected and setup properly. Step ...

  • LevelOne FCS-3091 - page 93

    Intell igent Surveillance So lution LevelOne IP CamSecure - 92 - Operate mode/ Edit m ode Switch button 6.1.2 Add/Rotate/Delet e Device Indicator Add Indicator: Step 1: Make sure you ar e in Edit mode and all devices are connected and inserted. Step 2: Click on the “ Map ” icon to go to the desired map layer . Step 3 : Please make sure the map ...

  • LevelOne FCS-3091 - page 94

    Intell igent Surveillance So lution LevelOne IP CamSecure - 93 - Triangular indicator 6.2.2 E-Map picture This window will show the map layer and indicators. Device Indicator: Select device indicators from the Device and Map Tree list for related information and to preview video. Map indicator: Selecting a map indicator will bring you to that m ap ...

  • LevelOne FCS-3091 - page 95

    Intell igent Surveillance So lution LevelOne IP CamSecure - 94 - 7. Log Viewer *IP CamSecure Lite on ly has System Log option in Log Viewer . View the history and export reports of unusual eve nts detected by the Smart Guard System. To launch Log Viewer, simply click on Config and select Log Viewer from the menu. ...

  • LevelOne FCS-3091 - page 96

    Intell igent Surveillance So lution LevelOne IP CamSecure - 95 - Step1 Step2 Step3 7.1 Unusual Ev ent Step1 : Ch oose the type of events you wish to view or select All from the drop-down menu to view all. The types of Unusu al Events include General Motion, Foreign Object , Missing Object, Focus L ost, Camera Occlusion, Signal Lost , Disk Space Exh ...

  • LevelOne FCS-3091 - page 97

    Intell igent Surveillance So lution LevelOne IP CamSecure - 96 - * Note: D etection of some sy stem logs is not available under Lite license. Step 2: View the events that happened on a parti cular date or d uring a given time period by selecting search period. For a particular date: check the Date box right and indicate the date. For a period: chec ...

  • LevelOne FCS-3091 - page 98

    Intell igent Surveillance So lution LevelOne IP CamSecure - 97 - 7.4 Counting Appli cation (Diagram) * Note: This function is not available under Lite license. Display the Counting Applica tion data in diagra m format. Step1: Select the channel you want to check or select All from the drop-do wn menu for all channels. Step 2: From the dr op-down me ...

  • LevelOne FCS-3091 - page 99

    Intell igent Surveillance So lution LevelOne IP CamSecure - 98 - 7.6 Export After each log search, export needed info to .xls or .txt files. Step1: Press the button Export to . Step2: Type the file name and choose the file format ( .xls or .txt). Step 1 .xls .txt ...

  • LevelOne FCS-3091 - page 100

    Intell igent Surveillance So lution LevelOne IP CamSecure - 99 - 8. Backu p The backup function saves recor ded video and other log information. Backup files may be reloaded on any P C with the Playback System installed. Follow the instructions below for more information on obtaining backup files. ...

  • LevelOne FCS-3091 - page 101

    Intell igent Surveillance So lution LevelOne IP CamSecure - 100 - 8.1 Backup Recorded file s Step 1: Add ( Remote) Backup Site: Press the “Rem ote Server ” button to go to remote backup site management to add and setup the backup site.  Enter the IP address or DNS, Port, Username , and Password .  Click Add to add the server.  Click OK ...

  • LevelOne FCS-3091 - page 102

    Intell igent Surveillance So lution LevelOne IP CamSecure - 101 - Step 9: Click the Backup icon to obtain Backup panel. Step 10: S ummary : Check the summary section to see the size o f the file(s) . Step 11: Media : Choose t he path you want to save the file or burn the file into a CD (direct CD burning for Windows XP only), DVD o r on Hard Disk. ...

  • LevelOne FCS-3091 - page 103

    Intell igent Surveillance So lution LevelOne IP CamSecure - 102 - 9. Remo te Live Viewer With the Remote Live Viewer console, remote us ers may watch up to 128 channels real-time video from remote live streaming servers. *There is only 1 channel displayed in Live Viewer in IP CamSecure Lite while there are up to 16 channels displayed in IP CamSecur ...

  • LevelOne FCS-3091 - page 104

    Intell igent Surveillance So lution LevelOne IP CamSecure - 103 - Server List General Setting 9.1 Setting Click General Setting to obtain setting dia log. 9.1.1 Gen eral Setting Audio preview:  Enable audio on active channel: Select to enabl e audio streaming on active channel. Miscellaneous:  Synchronize video frames: Select to avoid image t ...

  • LevelOne FCS-3091 - page 105

    Intell igent Surveillance So lution LevelOne IP CamSecure - 104 - 9.1.3 Group Setting Allocate different camera s into each appointed group. * Note: Cameras und er Lite license cannot be included in a group with other servers. Step 1: Log in to all the servers that contain the camera(s ) you wo uld like to put into the group(s) . Step 2 : Click Ins ...

  • LevelOne FCS-3091 - page 106

    Intell igent Surveillance So lution LevelOne IP CamSecure - 105 - Recoded : The system will follow the stream profile set in Main Console >Schedule > Enco ding Options. Original (IP only): The system will display the streaming directly from the IP camera and video server. Copy to: S elect in order to copy the preferred stre am profile of a ch ...

  • LevelOne FCS-3091 - page 107

    Intell igent Surveillance So lution LevelOne IP CamSecure - 106 - Step 1: Select the Monitor connected to the system. Step 2: Auto sc an group: Select appointed server group to activate auto scan settings. Step 3: Primary channel: Select appointed channel tha t will a lways be on the screen when auto scan is activated. Step 4 : S econdary channel: ...

  • LevelOne FCS-3091 - page 108

    Intell igent Surveillance So lution LevelOne IP CamSecure - 107 - Miscellaneous:  Popup system event: Select to allow system events appointed in Main Console to pop up messages as warning. 9.1.9 Jo ystick Setting Settings are same to Main Console joystick settings. For details please refe r to page 75. * Note: This function is not available unde ...

  • LevelOne FCS-3091 - page 109

    Intell igent Surveillance So lution LevelOne IP CamSecure - 108 - Log In/Log Out Server Connect/Disconnect Ca mera 9.2 Server/Group /Camera Display a complete list of the server(s) , gro up(s ) and camera(s ) that are added to the system. Server View : Cameras are listed ac cording to recording server. Group View : Cameras are listed according to c ...

  • LevelOne FCS-3091 - page 110

    Intell igent Surveillance So lution LevelOne IP CamSecure - 109 - will display below on camera list. Step3 : Do uble click on the duplicated camera to connect and display on screen. 9.3 PTZ Control Control the movement of PTZ cameras . With cameras that support PTZ control, y ou can move , zoom, patrol , adjust the focus, and set preset points of t ...

  • LevelOne FCS-3091 - page 111

    Intell igent Surveillance So lution LevelOne IP CamSecure - 110 - Start Monitor * Note: Some stream pro files are not available under Lite license. 9.4.6 Instant Playback To open the Instant Playback window of the camera, select the Ins tant Playback option and choose the period. The instant playback window allows the user to br owse recorded video ...

  • LevelOne FCS-3091 - page 112

    Intell igent Surveillance So lution LevelOne IP CamSecure - 111 - multiple monitors. Each appended monitor has the same list and view control buttons as the Main monitor, with the except ion of the Start, Playback, and Setting buttons. 9.5.2 E-Map Select Open E-Map to obtain the E -Map window. The GUI map helps to locate devices easily and the info ...

  • LevelOne FCS-3091 - page 113

    Intell igent Surveillance So lution LevelOne IP CamSecure - 112 - 10. Web View *There is only 1 channel displayed in Live View er via web br owser in IP CamSecure Lite while there are up to 4 channels displayed in IP CamSecure Pro simultane ously. Note: Make sure the Liv e Stream Server is enabled. Check 5. 14 Network Service for mo re detail. 10.1 ...

  • LevelOne FCS-3091 - page 114

    Intell igent Surveillance So lution LevelOne IP CamSecure - 113 - 11. Utilities A. Verification Tool B. License Management Tool C. Resourc e Management Tool D. DB Tool ...

  • LevelOne FCS-3091 - page 115

    Intell igent Surveillance So lution LevelOne IP CamSecure - 114 - A. Verification To ol The Verification Tool verifies whether the data created by the system has been tampered wi th. It is the process by which a digital watermark (a digital signature) is added to each recorded video frame to ensure its authenticity. There are 3 types of data that c ...

  • LevelOne FCS-3091 - page 116

    Intell igent Surveillance So lution LevelOne IP CamSecure - 115 - Watermark Verification report Note: Pre view of (.bmp ) ( .jpg) format is not allowed. 1.3 Verify Image/Video Step 1: Select single or m ultiple files for verification. Step 2: Click “verify ”to start verification. Step 3: The verification result will show on the watermark column ...

  • LevelOne FCS-3091 - page 117

    Intell igent Surveillance So lution LevelOne IP CamSecure - 116 - B. License Management Tool The license of the software should be registered b efore you start using the I ntelligent Surveillance System. Execute the License Management Tool to activate the license from dongle or serial number included with the software package, or de-activate the li ...

  • LevelOne FCS-3091 - page 118

    Intell igent Surveillance So lution LevelOne IP CamSecure - 117 - Transfer 1.2 Acti vate/Transfer License 1.2.1 Activate License Activation Online Step 1: Open License Ma nager Tool . Step 2: Select On line as A ctivate type. Step 3: Input the SN (S erial number)or Import SN fil e, and then click on Activate button. Step 4 : R estart Main Console i ...

  • LevelOne FCS-3091 - page 119

    Intell igent Surveillance So lution LevelOne IP CamSecure - 118 - Step 4: Save Request file, and then take i t to another PC that is connected to the Internet. Step 5: Execute OffLineT ool. exe in the other PC. Input the SN (Serial numb er) or Import SN file, and then click on Activate button. Step 6: Save Licens e file, and then take it to origina ...

  • LevelOne FCS-3091 - page 120

    Intell igent Surveillance So lution LevelOne IP CamSecure - 119 - Transfer Offline Step 1: Open License Ma nager Tool . Step 2: Select Transfe r Tab, and then check Offline as Transfer type . Step 3: Select SN , and then click Transfer button to transfer SN. Step 4 : Sav e Request file . Restart Main Console if transfer is success ful.. Step 5 : Co ...

  • LevelOne FCS-3091 - page 121

    Intell igent Surveillance So lution LevelOne IP CamSecure - 120 - C. Resource Manageme nt Tool The Resour ce Management Tool detects whether the system is operational. Note: F or further application of the Resource Management Tool, please r efer to page 56 In “Guard” chapter. 1.1 Exe cute Resource Ma nagement tool Step 1: Open Re source Report ...

  • LevelOne FCS-3091 - page 122

    Intell igent Surveillance So lution LevelOne IP CamSecure - 121 - 1.3 Advan ced Resource Report Click the Advanced button to search and export system logs in “Search” tab and obtain the history diagram of an specified period in “Diagram” tab. 1.3.1 S earch Step 1: Cho ose the syste m event type, and then select the standard perce ntage to s ...

  • LevelOne FCS-3091 - page 123

    Intell igent Surveillance So lution LevelOne IP CamSecure - 122 - 1.3.2 Display Step 1: Cho ose the syste m event type. Step 2 : S elect the Date/Time to draft history diagram. Step 3 : S etup the start time and duration for charting. User can choose “On e Day”, “One Ho ur” or “One Minute” as the duration. Step 4: Click “ Display ” ...

  • LevelOne FCS-3091 - page 124

    Intell igent Surveillance So lution LevelOne IP CamSecure - 123 - D. DB Tool The DB Tool repairs database files and Export configurations. Warning : improper use of this DB Tool may cause loss of recorded video. Step 1: Execute DB To ol from prog ram files. Step 2: Enter the password of administrator to log in. 1.1 Repair Database This page has thr ...

  • LevelOne FCS-3091 - page 125

    Intell igent Surveillance So lution LevelOne IP CamSecure - 124 - Step 3 : F or add database location, please click on butto n and use URL to choose location. For remove database location, please choose location form list and click on button to remove location. Step 4 : Click on Modify button to modify location . After modification, the Modify Resu ...

  • LevelOne FCS-3091 - page 126

    Intell igent Surveillance So lution LevelOne IP CamSecure - 125 - Step 3 : Check the video location windows. The system will list all video locations in table, but if there are any omit, please use to insert. Note: After inserting location, the system will show files count below table. Step 4 : Choose the method o f “Verify Only”, and click “ ...

  • LevelOne FCS-3091 - page 127

    Intell igent Surveillance So lution LevelOne IP CamSecure - 126 - Step 2 : S elect the location you want to Export and type the name of the configurations. Step 3 : Pre ss “Save” to sta rt to import database . ...

  • LevelOne FCS-3091 - page 128

    Intell igent Surveillance So lution LevelOne IP CamSecure - 127 - Appendix A - 3GPP Service How to setup 3GPP streaming connection ( using BenQ-Siemens mobile phones) System Configuration DVR / NVR server v2. 6 CPU: Intel core2 Duo 1.86 GHz Memory: 512 DDR R AM Ethernet: Realtek RTL8168/8111 P CI-E Hard Disk: 160GB Graphic card: A SUS Extreme AX 55 ...

  • LevelOne FCS-3091 - page 129

    Intell igent Surveillance So lution LevelOne IP CamSecure - 128 - 1.2 Configuration fro m 3G Mobile Phone 1.2.1 B enQ-Siemens E8 1 Step 1: Go to Menu, then Internet Step 2 : S elect Bookmarks Step 3: Add New Bookmark Step 4: Config ure the A dress setting as the following example. Ex: rtsp://61 .216.97 .69:554 / media00 . 3gp 61.216.97 .69:554 is t ...

  • LevelOne FCS-3091 - page 130

    Intell igent Surveillance So lution LevelOne IP CamSecure - 129 - 1.2.2 B enQ P50 Step 1: Connect GPRS Step 2: Download and install the [PLATFO RM4] software. Step 3: Execute the Main Console . Step 4: Press the [ Config]  [Network Service]  [Start] Step 5: Open [P LA TFORM 4], press the button framed by red into Option Step 6: [Open U RL] en ...

  • LevelOne FCS-3091 - page 131

    Intell igent Surveillance So lution LevelOne IP CamSecure - 130 - Appendix B – PDA / Sma rt Phone Client PDA / SP ( Smart Phone) Client are only applied for devices with Windows Mobile 5.0 platform or above. See the sections below to find how to install and exec ute PD A / S P Client. Note: 1. The different between Smart Phone and PDA Client is n ...

  • LevelOne FCS-3091 - page 132

    Intell igent Surveillance So lution LevelOne IP CamSecure - 131 - 1.2.2 E xecute and Login Step 1 : Make su re yo ur PDA /Smart Phone device is connected to network, and then go to Start - Programs - PDA/ Smart Phone Client to execute application. Step 2 : Insert Address , Port, Name and Password of the server and click on to login. 1.3 PD A/Smart ...

  • LevelOne FCS-3091 - page 133

    Intell igent Surveillance So lution LevelOne IP CamSecure - 132 - Displays all “snapshots” of channels connected to server as camera list. Click on indicated snapshot to get the channel information, and then click on to display live video. Note: The Screen Division and Refresh option coul d help to quick find the channel. Live Video Display: Li ...

  • LevelOne FCS-3091 - page 134

    Intell igent Surveillance So lution LevelOne IP CamSecure - 133 - I/O Device list: Select and monitor the device connected with Server. DI/DO status: Monitor the DI/DO status synchronized with Server, and then click Output button to trigger the DO action . Gray icon indicates the normal status of DI/DO devices . Red icon indicates the alarm status ...

  • LevelOne FCS-3091 - page 135

    Intell igent Surveillance So lution LevelOne IP CamSecure - 134 - Appendix C – iPh one Browser Live Streaming service can handle requests from i Phone’s Safari browser. This section will guide you how to use this feature with iPhone devices. 1.1 Configuration fro m Main Console server Step 1: Go to “ Config” an d select “Network Service? ...

  • LevelOne FCS-3091 - page 136

    Intell igent Surveillance So lution LevelOne IP CamSecure - 135 - Appendix D - R emote Desktop Tool How to install Remote Desktop Tool Step 1: Insert the Installat ion CD. Step 2: Go to Remote De sktop Viewer directly and Run Setup.exe file . How to Start R emote Desktop To ol Step 1 : Start - All Program s - Remote Desktop Viewer - Remote Desktop ...

  • LevelOne FCS-3091 - page 137

    Intell igent Surveillance So lution LevelOne IP CamSecure - 136 - Appendix E – iPhone App “iCamSecure” Description LevelOne “iCamSecure ” is a totally free app for iPad, iPhone and iPod to uch that enables you to monitor remote ly live video camera through LevelOne IP Cam Secure Su rveillance Lite/Pro Mega Systems. Easily view multiple ca ...

  • LevelOne FCS-3091 - page 138

    Intell igent Surveillance So lution LevelOne IP CamSecure - 137 - Appendix F – De vice Pack Device Pack is released to support new cameras. Always get the latest version of Device Pack to ensure your IP CamSecure syste m support current implementing cameras. You can find the Device Pack version oh the red area: Notice 1.) the Device Pack only ava ...

  • LevelOne FCS-3091 - page 139

    Intell igent Surveillance So lution LevelOne IP CamSecure - 138 - ...

Fabricant LevelOne Catégorie Security camera

Les documents que nous recevons du fabricant de l'appareilLevelOne FCS-3091 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques LevelOne
- manuels d’utilisations FCS-3091
- fiches produit LevelOne
- dépliants
- ou étiquettes-énergie LevelOne FCS-3091
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation LevelOne FCS-3091.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation LevelOne FCS-3091, manuels d’entretien, brefs manuels ou manuels de l’utilisateur LevelOne FCS-3091. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit LevelOne FCS-3091.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil LevelOne FCS-3091, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser LevelOne FCS-3091 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs LevelOne FCS-3091.

Le manuel d’utilisation complet LevelOne, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel LevelOne FCS-3091 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières LevelOne FCS-3091, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lLevelOne FCS-3091 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil LevelOne FCS-3091 - qui devraient nous aider dans les premières étapes lors de l'utilisation LevelOne FCS-3091
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de LevelOne FCS-3091
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service LevelOne FCS-3091 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de LevelOne FCS-3091?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec LevelOne FCS-3091, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec LevelOne FCS-3091 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)