Manuel d’utilisation Paradyne 6218-I1

92 pages 1.5 mb
Télécharger

Aller à la page of 92

Summary
  • Paradyne 6218-I1 - page 1

    6218-I1 Wireless Router User’ s Guide Document No. 6218-A2-GB23-00 September 2005 ...

  • Paradyne 6218-I1 - page 2

    A September 2005 6218-A2-GB23-00 Copyright 2005 P aradyne Corporation. All rights reser ved. Printed in U .S.A. Notice This publication is protected b y fe deral cop yright law . No par t of this publication ma y be copied or distributed, transmitted, transcribed, stored in a retr ie v al system, or translated into a n y human or computer languag e ...

  • Paradyne 6218-I1 - page 3

    6218-A2-GB23-00 September 2005 B Important Safety Instructions 1. Read and follo w all warning notices and instr uctions marked on the product or i ncluded in the manual. 2. Slots and openings in the cabin et are pro vided for v entilatio n. T o ensure reliable operation of the product and to protect it from overheating, these slots and openings mu ...

  • Paradyne 6218-I1 - page 4

    C September 2005 6218-A2-GB23-00 This equipment has been tested and found to comply with the limits f or a Class B digital de vice, pursuant to P ar t 15 of the FCC Rules. These limi ts are designed to provide reasonab le protection a gainst harmful interf erence i n a residential installation. This equipment generates, uses, and can r adi ate radi ...

  • Paradyne 6218-I1 - page 5

    6218-A2-GB23-00 September 2005 D Notice to Users of the Ca nadian T elephone Network NO TICE: This equipment meets t he applicable Industr y Canada T erminal Equi pmen t T echnical Specif ications. This is confir med b y the registration number . The abbrev iation IC befor e the registration number signifies that registr ation was perf or med based ...

  • Paradyne 6218-I1 - page 6

    E September 2005 6218-A2-GB23-00 ...

  • Paradyne 6218-I1 - page 7

    6218-A2-GB23-00 September 2005 i Contents About This Guide  Document Pur pose and Intended Audie nce . . . . . . . . . . . . . . . . . . . . v  Document Sum mary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v  Product-Rela ted Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi 1 Intr ...

  • Paradyne 6218-I1 - page 8

    Contents ii September 2005 6218-A2-GB23-00  ARP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6 4 Quick Setup  Quick Setup with Auto-Connect Enabled . . . . . . . . . . . . . . . . . . . . . . . 4-1  Quick Setup with Auto-Connect Disabled . . . . . . . . . . . . . . . . . . . . . . ...

  • Paradyne 6218-I1 - page 9

    Contents 6218-A2-GB23-00 September 2005 iii  Wireless . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-25 Wireless - Bas ic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-25 Wireless - Sec urity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Paradyne 6218-I1 - page 10

    Contents iv September 2005 6218-A2-GB23-00 ...

  • Paradyne 6218-I1 - page 11

    6218-A2-GB23-00 September 2005 v About This Guide Document Purpose and Intended A udience This guide contai ns detailed inf or mation about t he 6218-I1 route r . It is intended f or all users of the route r . Document Summary A master glossary of terms and acrony ms used in P aradyne documents is av ailable online at www .parad yne.com . Select Su ...

  • Paradyne 6218-I1 - page 12

    About This Guide vi September 2005 6218-A2-GB23-00 Pr oduct-Related Documents Complete document ation f or P aradyne products is av ailable on line at www .paradyne.com . Select Suppor t → T echnical Manuals . T o order a paper copy of a Par adyne doc ument, or to speak with a sales representat ive , please call 1-727 -530-2000. ...

  • Paradyne 6218-I1 - page 13

    6218-A2-GB23-00 September 2005 1-1 1 Intr oduction Intr oduction Congr atulations on becoming the o w n er of a 6218 wireless router . This User’ s Guide will sho w you ho w to set up the router , and ho w to customiz e its configura tion to get the most out of this product. Fe a tu r es The 6218 router has the f ollowing f eatures:  Built-in ...

  • Paradyne 6218-I1 - page 14

    1. Introduction 1-2 September 2005 6218-A2-GB23-00 System Requir ements In order to use the 62 18 wireless router f or Internet access, y ou must ha ve the f ollowing:  ADSL ser vice subscrip tion from your ISP  A PC with: — An Ethernet 10/100BaseT ne twork interf ace card — A processor equiv alent to or f aster than a P entium II 133 MHz ...

  • Paradyne 6218-I1 - page 15

    1. Introduction 6218-A2-GB23-00 September 2005 1-3 Fr ont Panel The front pane l contains LED indicators that sho w the status of the un it. Figure 1-1. Front P anel LEDs T able 1-1. Front P anel Label and LEDs Label Color Function xDSL LNK Green On: ADSL link is established. Flashing: ADSL link i s estab lished and active. Off: No ADSL link. xDSL ...

  • Paradyne 6218-I1 - page 16

    1. Introduction 1-4 September 2005 6218-A2-GB23-00 Rear Panel Figure 1-2. Back Panel The rear panel co ntains the por ts f or the router's data and po wer connect ions. T able 1-2. Rear Panel Labels and Connect ors Label Function LINE Connects to your ADSL l ine LAN 1–4 Connects the router to Ether net de vices on your LAN, such as your PC&a ...

  • Paradyne 6218-I1 - page 17

    6218-A2-GB23-00 September 2005 2-1 2 Hard war e Installation and PC Setup Overview This chapter provides basic instructions f or connecting the router to a comput er or a LAN and to the Inte r net using DSL. The first part provides instructions to set up the hardw are, an d the second part descr i bes how to pre pare yo ur PC f or use with the rout ...

  • Paradyne 6218-I1 - page 18

    2. Hardware Installation and PC Setup 2-2 September 2005 6218-A2-GB23-00 Connecting the Hard war e Shut down y our PC and any other equ ipment bef ore connecting it to the router . T o connect y our router: Procedur e 1. V er ify that the router’ s power s witch is in the Off (outward) positio n. V erify that any PCs and other LAN de vices you wi ...

  • Paradyne 6218-I1 - page 19

    2. Hardware Installation and PC Setup 6218-A2-GB23-00 September 2005 2-3 Figure 2-1. Hardware Installation If the LEDs are illuminated as e xpect ed, the router is working properly . T able 2-1. LED Indicators This LED . . . Should be: POWER Solid green to indicate that the device is turned on. If this light is not on, check if the power adapter is ...

  • Paradyne 6218-I1 - page 20

    2. Hardware Installation and PC Setup 2-4 September 2005 6218-A2-GB23-00 Conf iguring Y our Computer Before y ou can acce ss the router over the LAN you hav e to configu re y our PC's TCP/IP address to be 192. 168.1.x (where x is an y number betw een 3 and 254), with a subnet mask of 25 5.255.255.0 . Y our router's def ault IP address is ...

  • Paradyne 6218-I1 - page 21

    2. Hardware Installation and PC Setup 6218-A2-GB23-00 September 2005 2-5 Windo ws XP 1. In the Window s task bar , click on the Star t b utton, and the n click on Contr ol P anel. 2. Double-clic k on the Network Connections icon. 3. In the LAN or High-Speed Inte r net windo w , right-click on the icon corresponding to y our network interfa ce card ...

  • Paradyne 6218-I1 - page 22

    2. Hardware Installation and PC Setup 2-6 September 2005 6218-A2-GB23-00 Figure 2-5. Local Area Connect ion Pr operties (Windows XP) 5. In the Internet Protocol (TCP/IP) Properties dialog bo x, click on the r adio but ton labeled Use the f ollowing IP address . T ype an address between 192.168.1. 3 and 192.168.1. 254 in the IP Add ress field (192.1 ...

  • Paradyne 6218-I1 - page 23

    2. Hardware Installation and PC Setup 6218-A2-GB23-00 September 2005 2-7 Windo ws 2000 1. In the Win do ws task ba r , clic k on th e Star t b utton, poin t to Settings, and then click on Control P anel. 2. Double -click on the Netw ork and Dial-up Connections icon. 3. In the Network and Dial-up Connect ions window , right-clic k on the Local Area ...

  • Paradyne 6218-I1 - page 24

    2. Hardware Installation and PC Setup 2-8 September 2005 6218-A2-GB23-00 4. If Internet Protocol (TCP/ IP) does not appear as an installed component , click on Add. 5. In the Select Netw ork Component T ype dialog bo x, select Protocol, and then click on Add. 6. Select Microsoft in t he Manuf acturers box. 7. Select Inte rnet Proto col (TCP/IP) in ...

  • Paradyne 6218-I1 - page 25

    2. Hardware Installation and PC Setup 6218-A2-GB23-00 September 2005 2-9 8. After restarting your PC , open the Control P anel windo w , and then clic k on the Network icon. 9. Select the netw ork component labeled TCP/IP , and then clic k on Proper ti es. If you ha ve multiple TCP/IP listings, select the listing associated with your network card o ...

  • Paradyne 6218-I1 - page 26

    2. Hardware Installation and PC Setup 2-10 September 2005 6218-A2-GB23-00 Logging in to Y our Router This section sho ws how to connect to th e router's web inte rf ace, configure settings , and observe some stat istics of your Internet connection. 1. Open y our W eb browser , and type t he f ollowing URL in the address/lo cation bo x, and pre ...

  • Paradyne 6218-I1 - page 27

    2. Hardware Installation and PC Setup 6218-A2-GB23-00 September 2005 2-11 The home page is show n in Figure 2-8 . Figure 2-8. W eb Interface Home Page ...

  • Paradyne 6218-I1 - page 28

    2. Hardware Installation and PC Setup 2-12 September 2005 6218-A2-GB23-00 ...

  • Paradyne 6218-I1 - page 29

    6218-A2-GB23-00 September 2005 3-1 3 De vice Inf ormation Status Summary Displa y the gener al status repor t f or the router b y clicki ng on Summar y under De vice Info ( Figure 3- 1 ). Figure 3-1. Status Summary ...

  • Paradyne 6218-I1 - page 30

    3. Device Info rmation 3-2 September 2005 6218-A2-GB23-00 WA N Displa y the W AN status repor t from the b y clicking on W AN under De vice Info ( Figure 3-2 ). Figure 3-2. W AN Status When a W AN conne ction is configured, the screen looks like Figure 3-3 . Figure 3-3. W AN Status with W AN Connection ...

  • Paradyne 6218-I1 - page 31

    3. Device Information 6218-A2-GB23-00 September 2005 3-3 LAN Statistics Displa y LAN statistics by clic king on LAN under Statisti cs ( Figure 3-4 ). Figure 3-4. LAN Statistics WA N S t a t i s t i c s Displa y W AN statistics by clicking on W AN under Statistics ( Figure 3-5 ). Figure 3-5. W AN Statistics ...

  • Paradyne 6218-I1 - page 32

    3. Device Info rmation 3-4 September 2005 6218-A2-GB23-00 A T M Statistics Displa y A T M statistics b y clicking on A TM under Statis tics ( Figure 3 -6 ). Figure 3-6. A TM Sta tistics ADSL Statistics Displa y ADSL statistics by clic king on ADSL under Statistics ( Figure 3-7 ). Figure 3-7. ADSL Status ...

  • Paradyne 6218-I1 - page 33

    3. Device Information 6218-A2-GB23-00 September 2005 3-5 ADSL BER T est The ADSL Bit Error Rate (BER) test de termines the qu ality of the ADSL connection. The te st is perf or med b y transf erring idle cells containing a kno wn pattern and comparing the receiv ed data with this kno wn pattern to check f or any errors ( Figure 3-8 and Figure 3-9 ) ...

  • Paradyne 6218-I1 - page 34

    3. Device Info rmation 3-6 September 2005 6218-A2-GB23-00 Route Obtain the Routing statu s repor t b y clicking on the Route item under De vice Inf o ( Figure 3-10 ) Figure 3-10. Route Inf ormation ARP Displa y the ARP status report by c lic king on ARP under De vice Info ( Figure 3-11 ) Figure 3-11. ARP Status ...

  • Paradyne 6218-I1 - page 35

    6218-A2-GB23-00 September 2005 4-1 4 Quick Setup Quick Setup with A uto-Connect Enabled A uto-connect will automatically detect th e first usable PVC and automatically detect PPP oE, PPP oA, and Bridge Protocol (with DHCP Server a v ailab le). T o use auto-conn ect: Procedur e 1. Select Qui ck Setup . The Quic k Setup initial screen appears. Figure ...

  • Paradyne 6218-I1 - page 36

    4. Quick Setup 4-2 September 2005 6218-A2-GB23-00 2. Select DSL A uto-Connect, then clic k on Ne xt. The progress inf or mation screen appears . Figure 4-2. Detecting A vailable PVC Figure 4-3. Detecting availabl e PVC – A vailable PVC Detected ...

  • Paradyne 6218-I1 - page 37

    4. Quick Setup 6218-A2-GB23-00 September 2005 4-3 Quick Setup with A uto-Connect Disabled Procedur e 1. Select Qui ck Setup . The Quic k Setup initial screen appears. 2. V er ify that DSL A uto-Connect is not sele cted. Entry box es for VPI and VCI appear when DSL A uto-Connect is not select ed. 3. Specify VPI and VCI as dire cted by your ISP . Fig ...

  • Paradyne 6218-I1 - page 38

    4. Quick Setup 4-4 September 2005 6218-A2-GB23-00 6. Click on Ne xt. Fur ther parameters f or th e selected protocol are presented. F or e xample, if y ou selected PPP oA, the PPP User name and P ass word screen appears . Figure 4-6. PPP Username and P assword 7. Click on Ne xt. The Network Address T r anslation Settings screen appears . Figure 4-7 ...

  • Paradyne 6218-I1 - page 39

    4. Quick Setup 6218-A2-GB23-00 September 2005 4-5 8. Enter the settings specified b y your ISP and clic k on Ne xt. The Device Setup screen appears . Figure 4-8. Device Setup 9. If desired, co nfigure configure the DSL Rout er IP address and Subnet Mask f or the LAN interf ace to correspond to your LAN's IP Sub net. If y ou want the DHCP ser v ...

  • Paradyne 6218-I1 - page 40

    4. Quick Setup 4-6 September 2005 6218-A2-GB23-00 10. Click on Ne xt to continue. The W AN Setup Summar y screen displa ys all W AN settings that y ou hav e made. Check that the sett ings are correct bef ore clicking on the Sa v e / Reboot button. Clic king on Sa ve / Reboot sa ves y o ur settings and rest ar ts y our router . Figure 4-9. W AN Setu ...

  • Paradyne 6218-I1 - page 41

    6218-A2-GB23-00 September 2005 5-1 5 Adva nced Setup WA N Set up W AN parameters as dire cted by y our ISP . Figure 5-1. W AN Setup Screen ...

  • Paradyne 6218-I1 - page 42

    5. Advanced Setup 5-2 September 2005 6218-A2-GB23-00 Add Function – A TM PVC Configuration If yo u want to add a ne w r ule f or the W AN interface , clic k on the Add butt on. The A TM PVC Configuration screen appea rs. The A TM PVC Configur ation screen allows y ou to configure an A TM PVC identifier (VPI an d VCI) and select a service categor ...

  • Paradyne 6218-I1 - page 43

    5. Advanced Setup 6218-A2-GB23-00 September 2005 5-3 Connection T ype Screen 1. Select the type of network protocol and encapsulation mode ov er the A TM PVC that your ISP has in structed you to use, then click on Next b utton. Figure 5- 3. Connection T ype Screen 2. Select a connection type and clic k on Ne xt. In this e xample, th e Bridge Ser vi ...

  • Paradyne 6218-I1 - page 44

    5. Advanced Setup 5-4 September 2005 6218-A2-GB23-00 W AN Setup - Summary 1. Mak e sure that the sett ings on the W AN Setup - Summary screen match the settings pro vided by y our ISP . If all settings are correct, clic k on the Sav e button to sav e these settin gs; if not, click on the Back bu tton to mak e any modifications . If y ou want to cha ...

  • Paradyne 6218-I1 - page 45

    5. Advanced Setup 6218-A2-GB23-00 September 2005 5-5 W AN Setup Finish After y ou change any item in W AN Setup , click on the Finish b utton to apply the changes and rebo ot the system. Figure 5-7. W AN Setup Rebo ot Message ...

  • Paradyne 6218-I1 - page 46

    5. Advanced Setup 5-6 September 2005 6218-A2-GB23-00 Local Ar ea Network (LAN) Setup Y ou can configure the DSL Router IP address and Subne t Mask f or the LAN interf ace to conf orm your LAN's IP Subnet. The Sav e button only sa v es the LAN configuration da ta. The Sa ve/Re boot butt on sav es the LAN configuration data and reboots the ro ut ...

  • Paradyne 6218-I1 - page 47

    5. Advanced Setup 6218-A2-GB23-00 September 2005 5-7 NA T Y ou can configure the Vir tual Server , P or t T rigger ing, and DMZ Host when NA T is enab led. V irtual Servers A vir tual ser v er allows you to direct incomi ng traffic from the W A N side to a specific IP address on the LAN side. Click on the Add b utton to add a vir tual ser v er . Fi ...

  • Paradyne 6218-I1 - page 48

    5. Advanced Setup 5-8 September 2005 6218-A2-GB23-00 Y ou can select a Service or make new one . Enter the Ser v er IP Address, then clic k on Sa ve/A pply to submit you r configuration. Figure 5-10. V irtual Server Add Screen On this screen you can view and delete ser v ers. Click in the check bo x under Remov e and click on the Remo ve b utton to ...

  • Paradyne 6218-I1 - page 49

    5. Advanced Setup 6218-A2-GB23-00 September 2005 5-9 P ort T riggering Click the on the Add button to add P or t T r iggering fo r your Internet application. Figure 5-12. Port T riggering Setup Page Y ou can select an applicat ion e very time or create new one f or your application . Then click on Sa ve/Apply to sa ve y our settings. Figure 5-13. P ...

  • Paradyne 6218-I1 - page 50

    5. Advanced Setup 5-10 September 2005 6218-A2-GB23-00 The P or t T r igg ering list screen appears after y ou sav e your selections . Y ou can delete an entry by clic king in the Remo ve column then clicking on the Re mo ve but ton. Figure 5-14. Port T riggering List DMZ Host Y ou can de fine the IP a ddress of the DMZ Host o n this screen. Enter t ...

  • Paradyne 6218-I1 - page 51

    5. Advanced Setup 6218-A2-GB23-00 September 2005 5-11 Fir ewall F or security reasons, fir ew all options can be configur ed only from the LAN side of the router. IP Filtering – Outgoing The outgoing filter will bloc k th e traffic from the LAN side to the W AN side. Clic k on Add to create filters. Figure 5-16. IP Filtering – Outgoing Filter S ...

  • Paradyne 6218-I1 - page 52

    5. Advanced Setup 5-12 September 2005 6218-A2-GB23-00 IP Filtering – Incoming Incoming filter filters t he traffic fro m the W AN side to the LAN side. Click on Add to add incoming filter sett ings. Figure 5-18. IP Filtering – Incoming Filter Setup Page Enter a filter name , information about the sour ce address (from th e W AN side), and inf o ...

  • Paradyne 6218-I1 - page 53

    5. Advanced Setup 6218-A2-GB23-00 September 2005 5-13 Fire wall – MA C Filtering MA C filtering can f orwar d or blo ck tr affic b y MA C address . Y ou can change the policy or add settings to t he MAC filt ering table using the MA C Filtering Setup screen. Figure 5-20. IP Filtering - MA C Filtering Setup If yo u click on Change P olicy , a conf ...

  • Paradyne 6218-I1 - page 54

    5. Advanced Setup 5-14 September 2005 6218-A2-GB23-00 If y ou want to ad d a setting to the MA C filtering table , enter the Sour ce and Destination MA C address, and select prot ocol type, fr ame direction, and W AN interf ace. Then clic k on Sav e/Apply to sav e it. Figure 5-22. IP Filtering - MA C Filtering Add Page ...

  • Paradyne 6218-I1 - page 55

    5. Advanced Setup 6218-A2-GB23-00 September 2005 5-15 Po rt M a pp i n g Use the P or t Mapping screen to map m ultiple por ts to a PVC an d create bridging groups. Each group will perf or m as an indep endent network. Figure 5-23. Port Mapping T o create a new mapping g roup: 1. Click on Add. The P or t Mappi ng Configuration screen appears. Figur ...

  • Paradyne 6218-I1 - page 56

    5. Advanced Setup 5-16 September 2005 6218-A2-GB23-00 Quality of Service Y ou can configure t he Quality of Service to apply diff erent priorities to traf fic on the router . Figure 5-25. Quality of Service Setup Click on Add and the Add Network T raffi c Class Rule screen appears. T o add a rul e: 1. Give a name to this traffic class . 2. Assign a ...

  • Paradyne 6218-I1 - page 57

    5. Advanced Setup 6218-A2-GB23-00 September 2005 5-17 Figure 5-26. Quality of Service Ad d Scr een Routing – Default Gateway Y ou can change the Def ault Gate wa y on the Routing - Def ault Gate wa y screen. By def ault the Enable A utomatic Assigned Def ault Gate wa y box is chec ked. Figure 5-27. Default Gateway Setup ...

  • Paradyne 6218-I1 - page 58

    5. Advanced Setup 5-18 September 2005 6218-A2-GB23-00 If yo u want to specify t he def ault gate wa y address, the n unchec k the bo x as seen below . Enter the defau lt gatew ay address and, optiona lly , the W AN interf ace you will use. Clic k on Sav e / Apply to sav e the settings. If yo u add or change the def ault gatew ay address , you m ust ...

  • Paradyne 6218-I1 - page 59

    5. Advanced Setup 6218-A2-GB23-00 September 2005 5-19 Enter the rout e inf or mation and clic k on Sav e /Apply to make it active. No reboot is required. Figure 5-30. Static Route Add Routing – RIP If RIP is enable d, the router oper ation can be configured as Acti ve or P assive . Figure 5-31. RIP Setup ...

  • Paradyne 6218-I1 - page 60

    5. Advanced Setup 5-20 September 2005 6218-A2-GB23-00 DNS Serv er Use the DNS Server screen to reque st automatic assignment of a DNS or to specify a pr imary an d secondar y DNS. Figure 5-32. DNS Setup Dynamic DNS Use the Dynamic DNS screen to alias a dynamic IP addr ess to a static hostname, allowing y our router to be easily accessed from an ywh ...

  • Paradyne 6218-I1 - page 61

    5. Advanced Setup 6218-A2-GB23-00 September 2005 5-21 T o set up a Dynamic DNS entr y: 1. Click on Add. The Add Dynamic DNS screen appears. Figur e 5-34. Adding a Dyn amic DNS Entry 2. Select a D-DNS Provid er from the drop-do wn list. 3. Enter the Hostname y ou hav e selected f o r the interf ace. 4. Select the rout er Interf ace from the drop-dow ...

  • Paradyne 6218-I1 - page 62

    5. Advanced Setup 5-22 September 2005 6218-A2-GB23-00 ADSL There are thre e major items in the ADSL sett ings. Figure 5-35. DSL Settings Modulation Methods The f ollowing mo dulation methods are su ppor ted b y the 6218 wireless router:  G.dmt Enabled  G.lite Enabled  T1.413 Enab led  ADSL Enabled  Anne x L Enabled  ADSL2+ Enable ...

  • Paradyne 6218-I1 - page 63

    5. Advanced Setup 6218-A2-GB23-00 September 2005 5-23 Capability The f ollowing are includ ed under Capability:  Bits wap Enab le  SRA (Seamless Rate Adaptation) Enab le Do not change thes e settings unless so dire cted by your ISP . DSL Advanced Settings Do not change the DSL Adv anced Settings unless so directed b y your IS P . T o view the ...

  • Paradyne 6218-I1 - page 64

    5. Advanced Setup 5-24 September 2005 6218-A2-GB23-00  No Retrain: In this mode the router will tr y to estab lish a connection as in nor mal mode , but once the connection is up it will not retrain if the signal is lost.  L3: Puts the rout er into the L3 pow er state. Select a test mode and clic k on Apply . Then click on T one Selection. T ...

  • Paradyne 6218-I1 - page 65

    5. Advanced Setup 6218-A2-GB23-00 September 2005 5-25 Wi rel es s The Wireless screens let you configure th e set tings f or wireless acc ess , security , and protocols . Wir eless - Basic The Wireless - Basic screen lets you e nable or disable Wi-Fi capability in the router . The def a u lt setting f or wireless is enab led. F rom this screen you ...

  • Paradyne 6218-I1 - page 66

    5. Advanced Setup 5-26 September 2005 6218-A2-GB23-00 WEP encr yption is also e nabled and the encr yption str ength must also be selected.  WP A (Wi-Fi Protected Access) – Usually used f or the larger enterprise enviro nment, it uses a RADIUS server and TKIP (T emporal K ey Integ rity Protocol) encryption (instead of WEP encr yption, wh ich i ...

  • Paradyne 6218-I1 - page 67

    5. Advanced Setup 6218-A2-GB23-00 September 2005 5-27 Wir eless - MA C Filter The MA C filter screen allo ws you to manag e MAC a ddress filters. Add the MA C addresses that y ou want to manage and then select the mode that y ou want t o use to manage them. Y ou can disable this f eature or you can allo w o r deny access to the MAC addresses that y ...

  • Paradyne 6218-I1 - page 68

    5. Advanced Setup 5-28 September 2005 6218-A2-GB23-00 Wir eless - Bridge The Wireless - Bridge screen lets y ou determine whether the rout er acts as an access point or a wireless bridge. Figure 5-42. Wir eless – Bridge Wir eless - Advanced The Wireless - Adv anced screen lets y ou configure adva nced f eatures of the wireless LAN netw or k:  ...

  • Paradyne 6218-I1 - page 69

    5. Advanced Setup 6218-A2-GB23-00 September 2005 5-29  Xpress T echnology – A technolog y that utilizes stan dards based on frameb ursting to achie v e higher throug hput. With Xpress T echnolog y e nabled, aggregate throughput (t he sum of the in dividual throughput speeds of each client on the netw ork) can improv e by up to 25 percent in 80 ...

  • Paradyne 6218-I1 - page 70

    5. Advanced Setup 5-30 September 2005 6218-A2-GB23-00 ...

  • Paradyne 6218-I1 - page 71

    6218-A2-GB23-00 September 2005 6-1 6 Diagnostics T esting the DSL Connection The diagnostics screen allo ws you t o run diagnostic tests to chec k your DSL connection. The scr een shows test re sults f or three connections:  Connection to y our local netwo rk  Connection to y our DSL service provider  Connection to y our Internet service p ...

  • Paradyne 6218-I1 - page 72

    6. Diagnostics 6-2 September 2005 6218-A2-GB23-00 ...

  • Paradyne 6218-I1 - page 73

    6218-A2-GB23-00 September 2005 7-1 7 Management Sa ving and Restoring the Configuration The configur ation of yo ur router can be bac ke d up to a file, and also can b e restored from a file. Y ou can also restore the ro uter to its f actor y de fa ult configuration. Backing Up Conf iguration Settings T o back up y our settings , select Management ...

  • Paradyne 6218-I1 - page 74

    7. Management 7-2 September 2005 6218-A2-GB23-00 V er ify that y ou would like to sav e the file. Figur e 7-2. Backup Settin gs Upload C onfi rmation Select the location wher e you w ant to sa ve th e file. Figur e 7-3. Backup Settin gs File Locati on ...

  • Paradyne 6218-I1 - page 75

    7. Management 6218-A2-GB23-00 September 2005 7-3 Restoring Conf iguration Settings T o re store sa ved settings, select Management -> Settin gs -> Restore User Settings. Figure 7-4. Restore User Settings Scr een Select the bac kup file y ou want to restore and click on Update Settings. Figure 7-5. Restore Settings File Location ...

  • Paradyne 6218-I1 - page 76

    7. Management 7-4 September 2005 6218-A2-GB23-00 The router will restore setti ngs and reboot to activate the restored settings. Figur e 7-6. Upload in Pr ogress Scr een ...

  • Paradyne 6218-I1 - page 77

    7. Management 6218-A2-GB23-00 September 2005 7-5 Restoring Default Settings Restore Def ault will erase all current setti ngs and restore the router to f actory def ault settings. T o restore the router to f actor y def ault settings , select Management -> Settings -> Restore Def ault. Figure 7-7. Restore Default Settings Screen Reply OK to t ...

  • Paradyne 6218-I1 - page 78

    7. Management 7-6 September 2005 6218-A2-GB23-00 The router will restore the de fault settings and reboot. Figure 7-9. Restore Default Settings Reboot System Log The System Log dialog a llows y ou to view the System L og and configure the System Log optio ns . Figure 7-10. System Log ...

  • Paradyne 6218-I1 - page 79

    7. Management 6218-A2-GB23-00 September 2005 7-7 V iew System Log Click on the "Vie w System Log" button to chec k the log file. Figure 7-11. V iew System Log ...

  • Paradyne 6218-I1 - page 80

    7. Management 7-8 September 2005 6218-A2-GB23-00 Conf igure System Log If the log is enabled, the system will log se lected e v ents: Emergency , Aler t, Critical, Error , W ar ning, Notice , Inf or mational, and Debuggi ng. All e v ents abov e or equal to the selected log lev els will be logged (maintained in the system log file) and display e d. ...

  • Paradyne 6218-I1 - page 81

    7. Management 6218-A2-GB23-00 September 2005 7-9 SNMP Simple Network Management Protocol ( SNMP) allows a manage ment application to retrie ve sta tistics and status from the SNMP agent in th e router . Use the SNMP screen to set up parameters f or SNMP access. Figure 7-13. SNMP Screen Select the desired value s and clic k on Sav e/Apply to configu ...

  • Paradyne 6218-I1 - page 82

    7. Management 7-10 September 2005 6218-A2-GB23-00 Internet T ime Use the Internet Time screen to specify whether the router uses Sim ple Network Time Protocol (SNT P) to obtain the time of da y from NTP ser v ers on the Internet. T o set up the router to obtain time from an NTP server : 1. Select “A utomatically synchronize with Inter net time se ...

  • Paradyne 6218-I1 - page 83

    7. Management 6218-A2-GB23-00 September 2005 7-11 Access Contr ol – Services Y ou can enab le or disable so me ser v ices of yo ur router b y LAN or W AN. If no W AN connection is defined, only the LAN sid e can be configured. Figure 7-15. Services Setup Access Contr ol – IP Addresses W eb acces s to the router can be limited when Access Contro ...

  • Paradyne 6218-I1 - page 84

    7. Management 7-12 September 2005 6218-A2-GB23-00 T o assign the IP address of the management station that is permitted to access the local managemen t ser vices , enter the IP address in the bo x and click on the Sav e/Ap ply b utton. Figure 7- 17. Access Control – IP Addr ess Add Screen Access Contr ol – Passwo rds Use Access Con trol -> P ...

  • Paradyne 6218-I1 - page 85

    7. Management 6218-A2-GB23-00 September 2005 7-13 Update Softwar e If yo ur ISP releases ne w software f or this router , f ollow these ste ps to perf orm an upgrade. 1. Obtain an upd ated softwar e image file from y our ISP . 2. Enter the path to the image file location or clic k on the "Bro wse" button to locate the image file. 3. Click ...

  • Paradyne 6218-I1 - page 86

    7. Management 7-14 September 2005 6218-A2-GB23-00 Reboot Router Select Management -> Reboot Router to reb oot the router using the web interf ace. The router will sa ve the current configur ation and reboot itself using the new configuratio n. The rebooting proce ss takes about tw o minutes to complete . Figure 7-20. Reboot Router Screen ...

  • Paradyne 6218-I1 - page 87

    6218-A2-GB23-00 September 2005 A-1 A Specif ications Specifications are subj ect to change without notice . T able A-1. 6218-I1 Specif ications Specif ication Criteria DSL Protocol Suppor t ANSI T1.413 (Full Rate ADSL) ITU G.992.1 (DMT) ITU G.992.2 (G.l ite) ITU G.992.3 (ADSL2) ITU G.992.5 (ADSL2+) ITU G.994.1 (G.h s) ITU G.997.1 Environment Operat ...

  • Paradyne 6218-I1 - page 88

    A. Specifications A-2 September 2005 6218-A2-GB23-00 ...

  • Paradyne 6218-I1 - page 89

    6218-A2-GB23-00 September 2005 IN-1 Index A About This Guide, v Access Control IP Address es, 7-11 Passwords, 7-12 Services, 7-11 ADSL, 5-22 BER Test, 3-5 Statistics, 3-4 Advanced Settings, DSL, 5-23 Advanced Setup, 5-1 ARP, 3-6 ATM PVC Configuration, 5-2 Statistics, 3-4 B Backing Up Configurati on Settings, 7-1 BER Test, 3-5 Bridge Service, 5-4 Br ...

  • Paradyne 6218-I1 - page 90

    Index IN-2 September 2005 6218-A2-GB23-00 J Japan Notices, D L Local Area Network (LAN) ports, connecting, 2-2 Setup, 5-6 Statistics, 3-3 Logging In, 3 -1 M MAC Filtering, 5-13 Management, 7-1 Mapping ports, 5-15 Modulation Methods, 5-22 N NAT, 5-7 Network Interface Card, 2-2 Notice to Users of the Canadian Telephone Network, D to Users of the Unit ...

  • Paradyne 6218-I1 - page 91

    Index 6218-A2-GB23-00 September 2005 IN-3 W WAN, 3-2, 5-1 Setup, 5-4 Statistics, 3-3 Status, 3-2 Warranty, A Web Interface Home Page, 2-11 Using, 3-1 Weight, A-1 Windows 2000, 2-7 Windows 95, 2-8 Windows 98, 2-8 Windows ME, 2-7 Windows NT, 2-9 Windows XP, 2-5 ...

  • Paradyne 6218-I1 - page 92

    Index IN-4 September 2005 6218-A2-GB23-00 ...

Fabricant Paradyne Catégorie Network Router

Les documents que nous recevons du fabricant de l'appareilParadyne 6218-I1 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Paradyne
- manuels d’utilisations 6218-I1
- fiches produit Paradyne
- dépliants
- ou étiquettes-énergie Paradyne 6218-I1
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Paradyne 6218-I1.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Paradyne 6218-I1, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Paradyne 6218-I1. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Paradyne 6218-I1.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Paradyne 6218-I1, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Paradyne 6218-I1 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Paradyne 6218-I1.

Le manuel d’utilisation complet Paradyne, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Paradyne 6218-I1 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Paradyne 6218-I1, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lParadyne 6218-I1 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Paradyne 6218-I1 - qui devraient nous aider dans les premières étapes lors de l'utilisation Paradyne 6218-I1
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Paradyne 6218-I1
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Paradyne 6218-I1 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Paradyne 6218-I1?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Paradyne 6218-I1, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Paradyne 6218-I1 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)