Français dropdown-ico

Manuel d’utilisation Grizzly G7209

52 pages 2.85 mb
Télécharger

Aller à la page of 52

Summary
  • Grizzly G7209 - page 1

    14'' PROFESSIONAL CABINET SAW MODEL G7209 AND G7210 INSTRUCTION MANUAL COPYRIGHT © 1999 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. OCTOBER, 2001 PRINTED IN TAIWAN ...

  • Grizzly G7209 - page 2

    WARNING Some dust created by power sanding, sawing, grind- ing, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints. • Crystalline silica from bricks, cement, and other masonr ...

  • Grizzly G7209 - page 3

    TABLE OF CONTENTS PAGE 1. SAFETY SAFETY RULES FOR POWER TOOLS ................................................................2-3 ADDITIONAL SAFETY INSTRUCTIONS FOR TABLE SAWS ................................4 SAFETY ACCESSORIES ......................................................................................5-6 COMMON DEFINITIONS, TERMS AND P ...

  • Grizzly G7209 - page 4

    -2- G7209/10 14'' Table Saw SECTION 1: SAFETY Safety Instructions For Power Tools 5. KEEP CHILDREN AND VISITORS AWAY. All children and visitors should be kept a safe distance from work area. 6. MAKE WORKSHOP CHILD PROOF with padlocks, master switches, or by removing starter keys. 7. DO NOT FORCE TOOL. It will do the job better and safer a ...

  • Grizzly G7209 - page 5

    G7209/10 14'' Table Saw -3- 9. USE PROPER EXTENSION CORD . Make sure your extension cord is in good condi- tion. Conductor size should be in accor- dance with the chart below. The amperage rating should be listed on the motor or tool nameplate. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating ...

  • Grizzly G7209 - page 6

    -4- G7209/10 14'' Table Saw Additional Safety Instructions For Table Saws 1. ALWAYS use blade guard, splitter and anti-kickback fingers on all ''through-saw- ing'' operations. Through-sawing opera- tions are those when the blade cuts com- pletely through the workpiece as in ripping or crosscutting. 2. AVOID KICKBACKS. ...

  • Grizzly G7209 - page 7

    G7209/10 14'' Table Saw -5- Push Sticks The use of push sticks, particularly when cutting small or narrow workpieces, provides a double benefit for saw operators. The push stick pro- vides added leverage, enabling the operator to keep the workpiece firmly supported against the fence and table. At the same time, the push stick keeps the op ...

  • Grizzly G7209 - page 8

    -6- G7209/10 14'' Table Saw Push Paddles Push paddles provide added leverage and sup- port when ripping or crosscutting wide work- pieces. Grizzly offers a number of push paddles in the Grizzly catalog. See Figure 3. Featherboard Easily made from scrap stock, featherboards provide an added degree of protection against kickback. To make a ...

  • Grizzly G7209 - page 9

    G7209/10 14'' Table Saw -7- Common Definitions, Terms and Phrases The following is a list of common definitions, terms and phrases used throughout this manual as they relate to this table saw and woodworking in general. It is important that you read and become familiar with them before assembling, adjusting or operating this machine. Your ...

  • Grizzly G7209 - page 10

    -8- G7209/10 14'' Table Saw SECTION 2: CIRCUIT REQUIREMENTS 220V Single-Phase 220V Three-Phase G7209 Only: The Model G7209 has a 5 H.P., 3450 R.P.M. motor which requires a 220V single-phase circuit. The cord set included does not have a plug, as the style of plug you require will depend upon the type of service you currently have or plan ...

  • Grizzly G7209 - page 11

    G7209/10 14'' Table Saw -9- We do not recommend the use of extension cords on 220V equipment. It is much better to arrange the placement of your equipment and the installed wiring to eliminate the need for extension cords. Should it be necessary to use an extension make sure the cord is rated Hard Service (grade S) or better. Refer to the ...

  • Grizzly G7209 - page 12

    -10- G7209/10 14'' Table Saw SECTION 3: INTRODUCTION We are proud to offer the Grizzly Model G7209/10 14" Table Saw. The Model G7209/10 is part of a growing Grizzly family of fine woodworking machinery. When used according to the guide- lines set forth in this manual, you can expect years of trouble-free, enjoyable operation and proo ...

  • Grizzly G7209 - page 13

    G7209/10 14'' Table Saw -11- Unpacking The Model G7209/10 is shipped from the manu- facturer in a carefully packed carton. If you dis- cover the machine is damaged after you’ve signed for delivery, immediately call Customer Service for advice. When you are completely satisfied with the con- dition of your shipment, you should inventory ...

  • Grizzly G7209 - page 14

    -12- G7209/10 14'' Table Saw Clean up The table and other unpainted parts of the Model G7209/10 are coated with a waxy grease that protects them from corrosion during shipment. Clean this grease off with a solvent cleaner or cit- rus-based degreaser such as Grizzly’s G7895 Degreaser. Do not use chlorine-based solvents – if you happen ...

  • Grizzly G7209 - page 15

    G7209/10 14'' Table Saw -13- SECTION 4: ASSEMBLY Beginning Assembly Most of your Model G7209/10 has been assem- bled at the factory, but some parts must be assembled or installed after delivery. We have organized the assembly process into steps. Please follow along in the order presented here. TOOLS REQUIRED: You will need a high quality ...

  • Grizzly G7209 - page 16

    -14- G7209/10 14'' Table Saw Figure 7. Using tape to shim for wing alignment. Masking Tape 5. Raise or lower the rear of the wing until the wing and table are flush. Tighten the bolt. Any adjustment at this point should be mini- mal. 6. Check flushness at the front bolt and read- just if necessary. 7. Repeat Steps 3-4 for the other extens ...

  • Grizzly G7209 - page 17

    G7209/10 14'' Table Saw -15- Guard Support Shaft 4. Attach the square fence tube to the front rail using the hex bolts and lock washers sup- plied. See Figure 10A. 5. Attach the fence and slide across the length of the rails to ensure smooth, accurate fence movement. Figure 10A. Attaching fence tube to front rail. FIGURE 10B. Attaching gu ...

  • Grizzly G7209 - page 18

    -16- G7209/10 14'' Table Saw 2. Set a machinist’s square against the face of the blade guard/splitter. Slightly rotate the rear bracket to adjust the face of the blade guard perpendicular to the table top as shown in Figure 13. Figure 12. Blade guard and splitter in place. Figure 13. Guard assembly square to table. Blade Guard/Splitter ...

  • Grizzly G7209 - page 19

    G7209/10 14'' Table Saw -17- Figure 16. Proper splitter/blade alignment. Adjusted rear splitter Added washers Proper Alignment Front Support Bracket Adjustment Screws 8. The arbor bracket and motor pulley needs adjusting. Loosen the cap screw and the setscrew as shown in Figure 17 , and slowly slide the arbor bracket towards the end of th ...

  • Grizzly G7209 - page 20

    -18- G7209/10 14'' Table Saw Figure 18. Setscrew on each corner of insert. Table Insert The table insert provides access to the blade and arbor when removed. When in place, the insert provides support for materials being cut. 1. Disconnect the power cord from the outlet. 2. Ensure that all four setscrews are firmly in contact with the tab ...

  • Grizzly G7209 - page 21

    G7209/10 14'' Table Saw -19- SECTION 5: ADJUSTMENTS Blade Height Blade Tilt 1. Set your blade angle at zero as shown on the angle indicator on the front of the saw and raise the blade several inches above the table. 2. Place a machinist’s square flat on the table and slide it along side the blade. The square should contact the blade eve ...

  • Grizzly G7209 - page 22

    -20- G7209/10 14'' Table Saw Figure 22. Adjusting blade to miter slot after rotating blade 180° and sliding square down miter slot. Figure 23. Table mounting bolt holes. Table Mount Holes 5. The difference between the two measure- ments must be equal to or less than 1 ⁄ 64 ". 6. If the difference is greater than 1 ⁄ 64 ", l ...

  • Grizzly G7209 - page 23

    G7209/10 14'' Table Saw -21- Figure 24. Figure 25. #1 #2 #3 #4 Blade tilted to 45° #1 #2 #3 #4 Blade tilted to 45° 10. Refer to Figures 24 and 25, for shim place- ment. If the distance of A is longer than B, shim(s) will need to be placed under corners #1 and #2. If the distance of B is longer than A, shim(s) will need to be placed unde ...

  • Grizzly G7209 - page 24

    -22- G7209/10 14'' Table Saw Rip Fence The rip fence included with your Model G7209/10 14" Table Saw is designed to provide excellent ripping accuracy when properly adjusted. There are three main adjustments to concern yourself with: square, parallelism and clamping pressure. SQUARE Place a machinist’s square against the side of th ...

  • Grizzly G7209 - page 25

    G7209/10 14'' Table Saw -23- Blade Alignment The blade position can be adjusted slightly in case it contacts the table insert when raised or tilted. This adjustment can be made by moving the table, the whole trunnion assemble, or by just moving the arbor bracket. Try adjusting by mov- ing the table first as this is the easiest way. If tha ...

  • Grizzly G7209 - page 26

    -24- G7209/10 14'' Table Saw To adjust the blade position by moving the arbor bracket: 1. Disconnect plug from power source. 2. Remove the table and wings and set them to one side. 3. Loosen the blade adjustment cap screw shown in Figure 30B. 4. To adjust the arbor bracket, loosen the cap screw and the setscrew. Slowly slide the arbor bra ...

  • Grizzly G7209 - page 27

    G7209/10 14'' Table Saw -25- Pre-Run Check Test Run 1. Face the table saw and stand to the left of the blade path. 2. With one finger on the START button and one finger on the STOP button, turn the saw on. Be ready to turn it off in case of mishap. 3. Watch and listen to the saw. Note whether there are any unusual sounds or excessive vibr ...

  • Grizzly G7209 - page 28

    -26- G7209/10 14'' Table Saw 4. If anything appears abnormal, immediately turn off the saw and fix the problem. If a problem exists that is beyond the scope of this manual, call our service department. 5. If the saw is behaving normally, turn it off and prepare to make a cut according to the instructions outlined in the following sec- tio ...

  • Grizzly G7209 - page 29

    G7209/10 14'' Table Saw -27- Figure 34. Plywood blade. 4. Plywood Blade: Used for cutting plywood or veneers. A 14" plywood blade will have 80+ teeth, a steep alternate top bevel tooth pro- file and very shallow gullet. See Figure 34. 5. Thin-kerf: Most types of saw blades are available in a thin-kerf style. Used primarily to minimiz ...

  • Grizzly G7209 - page 30

    -28- G7209/10 14'' Table Saw Ripping Ripping means to cut with the grain of the wood. In other materials such as MDF or plywood, rip- ping simply means to cut lengthwise. To rip a board: 1. Inspect the board for soundness. You will need a straightedge to rip with accuracy. Your workpiece may need to be jointed flat before attempting to cu ...

  • Grizzly G7209 - page 31

    G7209/10 14'' Table Saw -29- Dado Operations In addition to its ability to rip and crosscut lumber, the table saw is also an invaluable tool for creat- ing a variety of dadoes. These non-through cuts can be created with a regular saw blade or with specially-designed stacking or wobbling dado blades. See Figure 38 . Figure 38. Optional dad ...

  • Grizzly G7209 - page 32

    -30- G7209/10 14'' Table Saw Dadoing operations can also be accomplished using a conventional saw blade. To create a sin- gle-blade dado: 1. Clearly mark the width of the dado cut on your workpiece. Include marks on the edge of your workpiece so you can clearly identify your intended cut while the material is laying flat on the saw table. ...

  • Grizzly G7209 - page 33

    G7209/10 14'' Table Saw -31- 2. Ensure that the saw is switched off and dis- connected from its power source. 3. Remove the table insert, splitter guard and the regular saw blade from the arbor. 4. Attach and adjust the dado blade system as recommended in the dado blade’s instruc- tions. Raise the blade system according to your needs. M ...

  • Grizzly G7209 - page 34

    -32- G7209/10 14'' Table Saw SECTION 7: MAINTENANCE V-Belt To ensure optimum power transmission from the motor to the blade, the V-belts must be in good condition and operate under proper tension. When replacing V-belts, it is important to replace all four at the same time - even if they do not all appear worn. Belt tension should be chec ...

  • Grizzly G7209 - page 35

    G7209/10 14'' Table Saw -33- Figure 43. Lubricate these areas. The shielded ball bearings in the motor and throughout the Model G7209/10 require no fur- ther lubrication during their lifetime. When they do wear out, replacements can be obtained through the Grizzly Parts Department. Lubricate the areas indicated below every 12 months. 1. B ...

  • Grizzly G7209 - page 36

    -34- G7209/10 14'' Table Saw The following pages contain general machine data, troubleshooting guide, parts diagram, parts list and Warranty/Return information for your Model G7209/10 Table Saw. If you need parts or help in assembling your machine, or if you need operational information, we encourage you to call the Customer Service Depar ...

  • Grizzly G7209 - page 37

    G7209/10 14'' Table Saw -35- Customer Service #: (570) 546-9663 • To Order Call: (800) 523-4777 • Fax #: (800) 438-5901 MACHINE DATA SHEET Design Type .................................................................................................... Tilting Arbor Overall Dimensions: With Wings and Fence Rails ....................... ...

  • Grizzly G7209 - page 38

    -36- G7209/10 14'' Table Saw Design Type .................................................................................................... Tilting Arbor Overall Dimensions: With Wings and Fence Rails ....................................................82" W x 47" D x 42" H Table Height ................................... ...

  • Grizzly G7209 - page 39

    G7209/10 14'' Table Saw -37- 5 HP Magnetic Switch -NHD Type MOTOR SINGLE-PHASE 220 VOLT POWER SOURCE GROUND 2 4 30 3 6 Disconnect power from machine before performing any electrical service. Failure to do this will result in a shock hazard leading to injury or death. ON T1 2 T2 4 T3 6 97 95 96 98 1L1 3L2 5L3 NO 13 2T1 5L3 6T3 NO 14 ...

  • Grizzly G7209 - page 40

    -38- G7209/10 14'' Table Saw 7-1/2 HP Magnetic Switch -NHD Type MOTOR THREE-PHASE 220 VOLT POWER SOURCE GROUND ©G i l Id ilI MR i 16 22 28 Disconnect power from machine before performing any electrical service. Failure to do this will result in a shock hazard leading to injury or death. ON T1 2 T2 4 T3 6 97 95 96 98 1L1 3L2 5L3 NO 13 2T1 ...

  • Grizzly G7209 - page 41

    101 128A 131 133 132 116 115 130 126 335 111 109 108 102 103 153A 118 123 138 114 141 137 142 140 138 143 139 144 409 410 405 408 401 404 411 401 402 106 152 107 122 153 110 117 125 80 81 406 403 330 334 82 134A 128A 134B 412 151 331 332 333 A LWA Y S U SE G U AR DS A N D A NTI-K IC K BA CK DEVIC ES 329 ...

  • Grizzly G7209 - page 42

    208 231 220 225 221 218 223 219 222 224 230 209 210 216 217 211 212 213 229 228 227 226 208A ...

  • Grizzly G7209 - page 43

    14 15 77 57 56 58 60 65 3 3 66 33 31 56 59 16 2 27 15 78 14 7 38 8 6 5 9 39 40 41 30 44 47 48 29 45 43 50 52 78 54 55 51 53A 11 32 31 83 41 10 4 ...

  • Grizzly G7209 - page 44

    69 70 74 75 25 28 61 17 18 1 21 19 20 68 22 24 28 26 24 23 23 72 62 24 62A 62B ...

  • Grizzly G7209 - page 45

    306 303 310 311 304 302 206 215 214 204 202 203 206 205 201 207 233 301 308 ...

  • Grizzly G7209 - page 46

    -44- G7209/10 14'' Table Saw 002 P7209002 BUSHING 003 P7209003 BUSHING 004 P7209004 ARBOR NUT 1" 005 P7209005 BLADE FLANGE 1" 006 P7209006 ARBOR ADAPTER 1" 007 P7209007 ARBOR 008 P6006 BALL BEARING 6006 009 PSB31M CAP SCREW M8-1.25 X 25 010 P7209010 BEARING NUT 011 P7209011 ARBOR BRACKET 014 HEX BOLT M12-1.75 X 35 015 PLW05 ...

  • Grizzly G7209 - page 47

    G7209/10 14'' Table Saw -45- 148 P7209148 SPACER 149 PLW06M LOCK WASHER 10MM 150 PN02M HEX NUT M10-1.5 151 PSS03M SET SCREW M6-1.0 X 8 152 P7209152 DADO INSERT 153 P7209153 MOTOR 153A KEY 8 X 8 X 30 201 P7209201 FRONT RAIL 202 P7209202 BACK RAIL 203 P7209203 SQUARE TUBE 204 P7209204 TAPE SCALE 205 PB03M HEX BOLT M8-1.25 X 16 206 PLW04M LO ...

  • Grizzly G7209 - page 48

    -46- G7209/10 14'' Table Saw SYMPTOM Motor will not start. Motor will not start; fuses or circuit breakers blow. Motor overheats. Motor stalls (resulting in blown fuses or tripped cir- cuit). Machine slows when oper- ating. Loud, repetitious noise com- ing from machine. Blade is not square w/miter slot or fence is not square to blade. Fen ...

  • Grizzly G7209 - page 49

    G7209/10 14'' Table Saw -47- PUSH STICK MAKE FROM 1 ⁄ 2 '' OR 3 ⁄ 4 '' WOOD OR THICKNESS LESS THAN WIDTH OF MAT'L TO BE CUT CAUTION USE ONLY GOOD STRONG WOOD OR PLYWOOD 1 ⁄ 2 '' GRID CUT HERE TO PUSH 1 ⁄ 2 '' WOOD CUT HERE TO PUSH 1 ⁄ 4 '' WOOD NOTCH TO HELP PREVENT HAND FRO ...

  • Grizzly G7209 - page 50

    -48- G7209/10 14'' Table Saw Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance. This is Grizzly’s sol ...

  • Grizzly G7209 - page 51

    G7209/10 14'' Table Saw -49- CUT ALONG DOTTED LINE 10. Which benchtop tools do you own? Check all that apply. ___1" x 42" Belt Sander ___6" - 8" Grinder ___5" - 8" Drill Press ___Mini Lathe ___8" Table Saw ___10" - 12" Thickness Planer ___8" - 10" Bandsaw ___Scroll Saw ___Disc/Belt Sa ...

  • Grizzly G7209 - page 52

    Place Stamp Here FOLD ALONG DOTTED LINE FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 TAPE ALONG EDGES--PLEASE DO NOT STAPLE Name_______________________________ Street_______________________________ City______________State______Zip______ Send a Grizzly Catalog to a friend: ...

Fabricant Grizzly Catégorie Saw

Les documents que nous recevons du fabricant de l'appareilGrizzly G7209 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Grizzly
- manuels d’utilisations G7209
- fiches produit Grizzly
- dépliants
- ou étiquettes-énergie Grizzly G7209
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Grizzly G7209.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Grizzly G7209, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Grizzly G7209. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Grizzly G7209.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Grizzly G7209, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Grizzly G7209 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Grizzly G7209.

Le manuel d’utilisation complet Grizzly, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Grizzly G7209 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Grizzly G7209, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lGrizzly G7209 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Grizzly G7209 - qui devraient nous aider dans les premières étapes lors de l'utilisation Grizzly G7209
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Grizzly G7209
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Grizzly G7209 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Grizzly G7209?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Grizzly G7209, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Grizzly G7209 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)