Manuel d’utilisation Alto-Shaam 714ESG

36 pages 2.19 mb
Télécharger

Aller à la page of 36

Summary
  • Alto-Shaam 714ESG - page 1

    Combitherm ® Combination Ov en / Steamer E S GAS COM B IT OUCH ® S ERI ES 6•10 ES G 10•10 ES G 7•14 ES G 10•20 ES G 12•18 ES G 20•20 ES G • I N ST ALLA T I O N W164 N9221 W ater Street • P .O. Box 450 • Menomonee Falls, W isconsin 53052-0450 USA PHONE: 262.251.3800 • 800.558.8744 USA/CANADA F AX: 262.251.7067 • 800.329.8744 ...

  • Alto-Shaam 714ESG - page 2

    i Delivery .......................................................................... 1 Unpacking ..................................................................... 1 Safety Procedur es and Precautions .............................. 2 Installation Installation Codes and Standards ............................. 3 V entilation Requirements ........ ...

  • Alto-Shaam 714ESG - page 3

    COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 1. THE INFORMATION CONTAINED IN THIS MANUAL IS IMPORTANT FOR THE PROPER INSTALLATION OF THIS OVEN. PLEASE READ CAREFULLY AND RETAIN FOR FUTURE REFERENCE. IMPROPER CONNECTION OF THIS APPLIANCE WILL NULLIFY ALL WARRANTIES. LES INFORMATIONS CONTENUES DANS CE MANUEL SONT IMPORTANTE ...

  • Alto-Shaam 714ESG - page 4

    COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 2. CAUTION Used to indicate the presence of a hazard that can or will cause minor personal injury, property damage, or a potential unsafe practice if the warning included with this symbol is ignored. CAUTION Used to indicate the presence of a hazard that can or will cause minor ...

  • Alto-Shaam 714ESG - page 5

    COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 3. INSTALLATION SITE INSTALLATION INSTALLATION CODES & STANDARDS The following codes and standards ar e required for installation of this oven: AIR SUPPL Y , ELECTRICAL CONNECTIONS, W A TER CONNECTIONS, AND W ASTE W A TER DISCHARGE. Installation must comply with local codes ...

  • Alto-Shaam 714ESG - page 6

    COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 4. INSTALLATION SITE INSTALLATION NOTE: Note dimensions required for doorways and aisles for access of the oven and pallet to the installation site. Transport the oven in an upright and level position only. Do not tilt the oven. ® POSITIONING ON SITE Stand the oven in a level ...

  • Alto-Shaam 714ESG - page 7

    COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 5. INSTALLATION SITE INSTALLATION POSITIONING REQUIREMENTS q In order to ensure proper ventilation, a minimum distance of at least 6-inches (152mm) must be kept from the control panels side (left) of the oven and any adjoining surfaces. NOTE: Additional clearance is needed for ...

  • Alto-Shaam 714ESG - page 8

    COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 6. SITE INSTALLATION Lifting Ins tructions Do not lift in this area! Damage t o the components will r esult. Cent er of Gra vity Front View T op View (Fron t) Leg 24” Spacer Board Remov e banding befor e lift ing. Place a spacer boar d(s ) 24” in length, with a minimum h ei ...

  • Alto-Shaam 714ESG - page 9

    COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 7. INSTALLATION COMMON SPECIFICATIONS q CombiGuard™ BWS Blended W ater System FI-28727 (INCLUDES 50 GALLON T ANK, 1 MEMBRANE & 3 FIL TERS) q CombiGuard™ BWS Replacement Filter Cartridge AMS-QT FI-29316 q CombiGuard™ BWS Replacement Filter Cartridge SCLX2-Q FI-29317 q ...

  • Alto-Shaam 714ESG - page 10

    COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 8. 6 • 10 ES G B C D 2-15/16" (74mm) 2" (50mm) 47-5/16" (1201mm) 42-1/16" (1068mm) 40-1/8" (1018mm) 37" (939mm) 34-5/16" (871mm) Wa ter Drain (Bottom) 21-1 1/16" (550mm) 5-3/16" (131mm) 25" (635mm) 7-1/2" (191mm) 7-9/16&q ...

  • Alto-Shaam 714ESG - page 11

    COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 9. 10 • 10 ES G 21-11/16" (550mm) 5-3/16" (131mm) 42-1/16" (1068mm) 40-1/8" (1018mm) 37" (939mm) 34-5/16" (871mm) Water Drain (Bottom) 5" (125mm) 5-9/16" (140mm) 41-7/16" (1053mm) 33-7/8" (860mm) 46-3/8" (1178mm) 25" ...

  • Alto-Shaam 714ESG - page 12

    COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 10. 7 • 14 ES G D A B Water Drain (Bottom) (650mm) 8-1/2" (216mm) 25-5/8" 42" (1066mm) 5-1/8" (130mm) 31-3/4" (805mm) 33-1/8" (840mm) 7-3/16" (181mm) 73-7/16" (1865mm) 36-7/16" (925mm) 30-3/ 16 " (766mm) [D] 4-5/8" (116mm ...

  • Alto-Shaam 714ESG - page 13

    COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 11. 10 • 20 ES G 45-3/16" (1148mm) 42-7/16" (1077mm) 22-11/16" (575mm) 12-13/16" (325mm) Water Drain (Bottom) 2-3/16" (56mm) 30-5/8" (778mm) 32-13/16" (833mm) 44" (1118mm) 2" (50mm) 31-3/4" (805mm) 8-15/16" (226mm) 49-13/ ...

  • Alto-Shaam 714ESG - page 14

    COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 12. 12 • 18 ES G 25-5/8" (650mm) 33-1/8" (840mm) 45-3/16" (1148mm) 42-7/16" (1077mm) 22-11/16" (575mm) 12-13/16" (325mm) Water Drain (Bottom) 8-1/2" (216mm) 31-3/4" (805mm) 52-11/16" (1338mm) 40-9/16" (1030mm) 48-1/8" (12 ...

  • Alto-Shaam 714ESG - page 15

    COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 13. 20 • 20 ES G [A,B] 4-3/8" (110mm) [D] 4-9/16" (116mm) [C] 3-9/16" (89mm) Water Drain (Side Back) [D] 4-5/8" (116mm) 2" (50mm) 55-7/16" (1407mm) 73-13/16" (1875mm) 5-7/8" (148mm) 17-1/4" (438mm) 19-11/16" (500mm) 26-9/16&qu ...

  • Alto-Shaam 714ESG - page 16

    COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 14. INSTALLATION ELECTRICAL An electrical wiring diagram is located behind the control panel on the left side of the oven. This appliance must be branch circuit pr otected with proper ampacities, in accordance with the wiring diagram. W ire size for the main incoming power to t ...

  • Alto-Shaam 714ESG - page 17

    COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 15. INSTALLATION MOBILE EQUIPMENT RESTRAINT The gas Combitherm must use a connector that complies with The Standard for Connectors for Movable Gas Appliances , ANSI Z21.69 CSA 6.16 and addenda Z21.69a-1989. A quick disconnect devise must be installed to comply with The Standard ...

  • Alto-Shaam 714ESG - page 18

    COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 16. INSTALLATION VENTILATION REQUIREMENTS An adequate ventilation system is requir ed for commercial cooking equipment. Information may be obtained by writing to the National Fire Pr otection Association, Batterymarch Park, Quincy , MA 02269. When writing refer to NFP A No. 96. ...

  • Alto-Shaam 714ESG - page 19

    COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 17. INSTALLATION GAS SUPPLY & INSTALLATION The Alto-Shaam gas Combitherm has been set to operate with either natural gas or propane as indicated on the identification name plate. Make certain the gas supply matches the nameplate information. Should conversion to the opposit ...

  • Alto-Shaam 714ESG - page 20

    COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 18. INSTALLATION GAS SUPPLY & INSTALLATION Remove any tape or compound residue on all external thread connections before proceeding. Use an approved gas pipe sealant at all external threaded connections, Gas piping used on gas connections must avoid sharp bends that may res ...

  • Alto-Shaam 714ESG - page 21

    COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 19. INSTALLATION GAS SUPPLY & INSTALLATION The minimum size requir ement for gas piping or a flexible connector is 3/4 - inch (19mm). For long runs of gas piping, the pipe diameter must conform to the tables in the National Fuel Gas Code, ANSI/NFP A Z223.1. A listed gas shu ...

  • Alto-Shaam 714ESG - page 22

    COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 20. INSTALLATION GAS SUPPLY & INSTALLATION LEAk TESTING If a pressure leak test above 1/ 2 psi is to be performed on the building supply gas piping, the shut-off gas valve and oven inlet gas supply line must be disconnected from the building supply piping before conducting ...

  • Alto-Shaam 714ESG - page 23

    COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 21. INSTALLATION WATER SUPPLY & INSTALLATION WARNING TO PREVENT WATER PIPES FROM BURSTING, INCOMING WATER SUPPLY SHOULD BE TURNED OFF WHEN THE APPLIANCE IS NOT IN USE. WARNING WATER SUPPLY MUST BE OPEN WHEN CLEANING PROGRAM IS ACTIVATED. VERIFY WATER SUPPLY BEFORE STARTING ...

  • Alto-Shaam 714ESG - page 24

    COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 22. INSTALLATION WATER SUPPLY & INSTALLATION WATER REQUIREMENTS WATER QUALITY MINIMUM STANDARDS TWO (2) COLD W A TER INLETS - DRINKING QUALITY ONE (1) TREA TED W A TER INLET : 3/4" NPT* ONE (1) UNTREA TED W A TER INLET : 3/4" NPT* LINE PRESSURE: 30 to 90 psi 2.8 t ...

  • Alto-Shaam 714ESG - page 25

    COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 23. INSTALLATION WATER VALVE WATER DRAINAGE s h u t - o f f v a l v e s h o w n i n t h e o f f p o s i t i o n NOTE: THE SHUT-OFF VALVE MUST BE IN THE OPEN POSITION WHEN THE OVEN IS BEING USED. A union is required. Install a 1-1/2-inch (41mm) diameter connection, drain line an ...

  • Alto-Shaam 714ESG - page 26

    COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 24. Stand Pipe, 1-1/2" NPT (38mm) diameter T o Dr ain - Floor Sink - Air Gap to be within the first 12" (305mm) of the ov en dr ain Drain Connection 1-1/2" NPT (38mm) Air Gap to be within the first 12" (305mm) of the ov en dr ain Manifold Pipe, a minimum of ...

  • Alto-Shaam 714ESG - page 27

    COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 25. INSTALLATION GREASE COLLECTION HOOK-UP ( i f eQuippeD w i t h t h i s featuRe ) • Grease Collection Hose Assembly is attached to the oven in the back. • Place Grease Collection Containers inside the tray of the Mobile Grease Collection Cart. Roll into place next to the ...

  • Alto-Shaam 714ESG - page 28

    COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 26. COMBITOUCH® CHECKLIST Use this list as a final check of oven installation conformance. Damage directly attributed to improper set up, installation, or cleaning can invalidate warranty claims. CLEARANCES: ARE ALL CLEARANCE REQUIREMENTS MET? ❑ YES ❑ NO Left: 6" (152 ...

  • Alto-Shaam 714ESG - page 29

    COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 27. INSTALLATION This section is provided for the assistance of qualified technicians only and is not intended for use by untrained or unauthorized service personnel. If your Alto-Shaam ® unit is not operating properly , check the following before calling your Authorized Alto- ...

  • Alto-Shaam 714ESG - page 30

    COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 28. INSTALLATION Error Code Error Call Out in Display Description of Error Possible Cause E13 Boiler Temperature High Boiler temperature overheats — Scale build up inside steam generator. — Scale build up on water level probe. — B4 Probe connection problem. — B4 probe f ...

  • Alto-Shaam 714ESG - page 31

    COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 29. INSTALLATION ERROR CODES Error Code Error Call Out in Display Description of Error Possible Cause E34 Steam Generator Drain Pump Fault Water level in steam generator does not drop during cleaning program — Scale build up inside the steam generator drain pump. — Scale bu ...

  • Alto-Shaam 714ESG - page 32

    COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 30. see m o to r c o n t r o l e r r o r c h a rt o n n e x t pag e INSTALLATION ERROR CODES Error Code Error Call Out in Display Description of Error Possible Cause E57 No Rinse Water During rinse no water fl ow is detected through solenoid valve — Water supply is shut off. ...

  • Alto-Shaam 714ESG - page 33

    COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 31. INSTALLATION Type of Error Indication Release of Error Undervoltage LED fl ashing sequence, with 1 fl ash per period. Voltage of intermediate circuit is less than 250V Overvoltage LED fl ashing sequence, with 2 fl ashes per period. Voltage of intermediate circuit exceed ...

  • Alto-Shaam 714ESG - page 34

    COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 32. INSTALLATION ERROR CODES When the oven malfunctions, an error code will appear in the display . PRESS THE ST AR T ICON TO ACKNOWLEDGE THE ERROR. The icons that begin to flash repr esent operational modes that are still usable. When the oven fault is corrected, the Combither ...

  • Alto-Shaam 714ESG - page 35

    COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 33. ORIGINAL EQUIPMENT LIMITED WARRANTY Alto-Shaam, Inc. warrants to the original purchaser that any original part that is found to be defective in material or workmanship will, at Alto-Shaam’s option, subject to provisions hereinafter stated, be replaced with a new or rebuil ...

  • Alto-Shaam 714ESG - page 36

    COMBITOUCH ® ESG SERIES • GAS INST ALLA TION MANUAL • MN-29246 • 34. W164 N9221 W ater Street • P .O. Box 450 • Menomonee Falls , W isconsin 53052-0450 • U.S.A. PHONE: 262.251.3800 • 800.558-8744 USA/CANADA F AX: 262.251.7067 • 800.329.8744 U.S.A. ONL Y www .alto-shaam.com All Alto-Shaam equipment is sold F.O.B. shipping point, and ...

Fabricant Alto-Shaam Catégorie Oven

Les documents que nous recevons du fabricant de l'appareilAlto-Shaam 714ESG peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Alto-Shaam
- manuels d’utilisations 714ESG
- fiches produit Alto-Shaam
- dépliants
- ou étiquettes-énergie Alto-Shaam 714ESG
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Alto-Shaam 714ESG.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Alto-Shaam 714ESG, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Alto-Shaam 714ESG. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Alto-Shaam 714ESG.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Alto-Shaam 714ESG, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Alto-Shaam 714ESG par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Alto-Shaam 714ESG.

Le manuel d’utilisation complet Alto-Shaam, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Alto-Shaam 714ESG - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Alto-Shaam 714ESG, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lAlto-Shaam 714ESG qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Alto-Shaam 714ESG - qui devraient nous aider dans les premières étapes lors de l'utilisation Alto-Shaam 714ESG
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Alto-Shaam 714ESG
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Alto-Shaam 714ESG dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Alto-Shaam 714ESG?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Alto-Shaam 714ESG, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Alto-Shaam 714ESG il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)