Français dropdown-ico

Manuel d’utilisation Aga Ranges DC6 (FFD)

60 pages 1.03 mb
Télécharger

Aller à la page of 60

Summary
  • Aga Ranges DC6 (FFD) - page 1

    AGA SIX-FOUR SERIES - DC6 (FFD) (NA TURAL GAS AND PROP ANE GAS) OWNERS MANUAL 1 1/09 EINS 514735 PLEASE READ THESE INSTRUCTIONS BEFORE USING THIS APPLIANCE INST ALLER: LEA VE THESE INSTRUCTIONS WITH THE APPLIANCE CUSTOMER: KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE Remember , when replacing a p art on this appliance, use only spare part s that yo ...

  • Aga Ranges DC6 (FFD) - page 2

    SECTION P AGE INST ALLA TION SECTION 3 TECHNICAL DA T A 4 INST ALLA TION 5 FITTING AND PRODUCT DIMENSIONS 6 ELECTRICAL CONNECTION 7 - 8 CONNECTING TO GAS 9 LOCA TION 10 COOKER ST ABILITY 1 1 - 12 PRESSURE TESTING 12 LEVELLING AND MOBILITY WHEELS 13 FITTING OF HOTPLA TE CASTINGS AND P AN 14 - 17 SUPPORTS SPLASHBACK 18 USERS GUIDE 19 GENERAL INFORMA ...

  • Aga Ranges DC6 (FFD) - page 3

    Inst allation Section 3 Remember , when replacing a p art on this appliance, use only spare part s that you can be assured conform to the safety and performance specification that we require. Do not use reconditioned or copy part s that have not been clearly authorised by AGA. CAUTION: THIS UNIT IS HEA VY , PROPER EQUIPMENT AND ADEQUA TE MANPOWER M ...

  • Aga Ranges DC6 (FFD) - page 4

    HOTPLA TE NA TURAL GAS L.H.F . R.H.F . R.H.R. L.H.R. CENTRE CENTRE W O K FRONT REAR BURNER TYPE UL TRA-RAPID RAPID RAPID SEMI-RAPID SEMI-RAPID UL TRA-RAPID MAXIMUM HEA T 5.85 kW 3.22 kW 3.22 kW 1.91 kW 1.91 kW 5 kW INPUT BTU’ s/hr 20,000 1 1,000 1 1,000 6,500 6,500 17,000 INJECTOR MARKING MAIN 80Hi 155 155 1 18 1 18 200 SECONDAR Y 2 x 1.30 - - - ...

  • Aga Ranges DC6 (FFD) - page 5

    CAUTION: THIS INST ALLA TION MUST CONFORM WITH LOCAL CODES OR, IN THE ABSENCE OF LOCAL CODES WITH THE NA TIONAL FUEL GAS CODE, ANSI Z223.I/NFP A 54 AND NA TIONAL ELECTRICAL CODE ANSI/NFP A 70 (IN CANADA CAN/CGA-B149 ) AND ONL Y USED IN A WELL VENTILA TED SP ACE, READ THESE INSTRUCTIONS BEFORE INST ALLING OR USING THIS APPLIANCE. PRIOR TO INST ALLA ...

  • Aga Ranges DC6 (FFD) - page 6

    FITTING AND PRODUCT DIMENSIONS 6 Fig. 1 DESN 512636 C Any side wall above the cooker on either side shall be not less than 3” (75mm) horizontally from the cooker (Fig. 1). Combustible surfaces over the top of the cooker must not be closer than 28” (71 1mm) and must not exceed 13” (400mm) in depth. 0” clearance to the back of the stove may b ...

  • Aga Ranges DC6 (FFD) - page 7

    Electric Shock Hazard Electrical Grounding is required on this appliance. Do Not connect to the electrical supply until the appliance is permanently grounded. Disconnect the power to the junction box before making the electrical connection. This appliance must be connected to a grounded, met allic, permanent supply or a grounding connector should b ...

  • Aga Ranges DC6 (FFD) - page 8

    ELECTRICAL CONNECTION IS LOCA TED A T THE TOP RIGHT HAND SIDE OF THE APPLIANCE, BEHIND SIDE P ANEL. DURING INST ALLA TION REMOVE THE RIGHT HAND SIDE P ANEL TO CONNECT ELECTRICAL SUPPL Y . Remove 6 screws securing side panel to gain access to mains terminal. See Fig. 3 for location of cover . Remember that the mains electrical cable must be routed t ...

  • Aga Ranges DC6 (FFD) - page 9

    WIRING DIAGRAM 59 CAUTION: ENSURE THA T THE COOKER IS ISOLA TED FROM ELECTRIC SUPPL Y The cooker can be installed with an approved flexible connection. Supply piping should not be less than 3/8 I/D Flexiline. Connection is made to the 1/2” NPT female thread located just below the hotplate level on the right hand side of the cooker . The gas flexi ...

  • Aga Ranges DC6 (FFD) - page 10

    This appliance must be installed on 1/8” thick Commercial Grade V inyl composition floor finishing materials or equivalent. Combustible side wall clearance above the hotplate shall be greater than 3”. Surfaces over the top of the range must not be closer than 28” and must not exceed 13” in depth. The vent slots in the back of the top plate ...

  • Aga Ranges DC6 (FFD) - page 11

    A stability bracket shall be secured firmly to the fabric of the building. For positioning of bracket (See Fig. 3). A safety chain should also be anchored firmly to the wall and cooker to prevent strain on the gas connection, when the cooker is withdrawn for servicing. When fitting a stability bracket and chain refer to Fig. 3, 3A and 3B. Ranges mu ...

  • Aga Ranges DC6 (FFD) - page 12

    The maximum gas inlet pressure to the appliance must not exceed 10” w .g. for NG and 14” for L.P . Gas. The minimum gas inlet pressure at the appliance must not be less than 5” w .g. Natural Gas and 1 1” w .g. L.P . Gas to enable the correct manifold pressure to be obtained. NOTE: The regulator is pre-set for either N.G . or L.P . Gas. Use ...

  • Aga Ranges DC6 (FFD) - page 13

    INST ALLA TION/LEVELLING The 6-4 Series is designed to stand on a flat and level surface, however , any unevenness may be overcome by adjusting the four levelling feet, one at each corner of the base plate. The adjusting screws are accessed by removing left and right hand hotplate castings (See section ‘T o Remove Hotplate Castings - Servicing Se ...

  • Aga Ranges DC6 (FFD) - page 14

    HOTPLA TE CASTINGS 1. Attach earth cable from centre casting to cooker chassis and locate over burner bodies. Repeat for LH and RH castings and that the gaskets are fitted where the outer castings overlap centre castings. Ensure that earth cables are attached. (See Fig. 6A) 2. Secure castings using 8 profiled fixing nuts. DO NOT OVERTIGHTEN . (See ...

  • Aga Ranges DC6 (FFD) - page 15

    4. Position burner caps onto burner bodies. (See Figs. 7A, 7B & 7C) 15 Fig. 6C DESN 512419 A 3. Fit and secure six burner rings using M4 screws on rear left hand, front centre, front right hand and rear right hand burners. Use No.6 3/8 screw on front left hand and centre rear burners. (See Fig. 6C). NOTE: The fitting of LH and centre burners ar ...

  • Aga Ranges DC6 (FFD) - page 16

    Fig. 7C DESN 51 1617 FITTING BURNER CAP - RAPID AND SEMI-RAPID BURNERS BURNER CAP RET AINING LUGS 16 Fig. 7B DESN 51 1618 BURNER CAP ASSEMBL Y OF RAPID AND SEMI-RAPID BURNERS BURNER HEAD ELECTRODE ...

  • Aga Ranges DC6 (FFD) - page 17

    5. Fit the pan supports in the following order The p an supports are marked on the underside to correspond to the markings below . The pan support s must locate in the recesses in the hotplate casting. (See Fig. 8A & 8B) 17 Import ant It is very important for the performance and reliability of the hob that the p an supports are fitted in accord ...

  • Aga Ranges DC6 (FFD) - page 18

    1. Locate tabs on rear of splashback assembly , into the brackets on the upper rear of the cooker . (See Fig. 9). Push fully into place. Fig. 9 DESN 512394 18 SPLASHBACK Fig. 8C DESN 513716 TO ADJUST P AN SUPPORT LEVEL 1. Loosen retaining nut using 8mm socket (See Fig. 8C). 2. T o prevent rocking adjust the pan support foot using 2.5mm allen key . ...

  • Aga Ranges DC6 (FFD) - page 19

    Users Guide 19 ...

  • Aga Ranges DC6 (FFD) - page 20

    20 GENERAL INFORMA TION As responsible manufacturers we take care to make sure that our product s are designed and constructed to meet the required safety standards when properly inst alled and used. IMPORT ANT NOTICE: PLEASE READ THE ACCOMP ANYING W ARRANTY . Any alteration that is not approved by Aga could invalidate the approval of the appliance ...

  • Aga Ranges DC6 (FFD) - page 21

    1. Do not store combustible materials, gasoline or other inflammable vapors and liquids near a range cooker . Child Safety Children MUST be taught safe range practices to prevent possible injury . Listed below are some basic practices we recommend you read and follow for safe use of this appliance when children are present. Children are more sensit ...

  • Aga Ranges DC6 (FFD) - page 22

    22 Fig. 10 DESN 512646 B ...

  • Aga Ranges DC6 (FFD) - page 23

    o The GAS HOTPLA TE CONTROL KNOBS can only be rotated counter-clockwise from the OFF position. Symbol - Ignition Setting Large Flame Symbol - High Setting Small Flame Symbol - Low Setting (See ‘ HOTPLA TE ’ section). z The BROILER ELEMENT CONTROL KNOB can be rotated in either direction. Clockwise Full on, with both elements on Counter-clockwise ...

  • Aga Ranges DC6 (FFD) - page 24

    z The hotplate has six gas burners: front left - ultra rapid (wok) burner - rated at 4.5 kW rear left and front centre - semi-rapid burners - each rated at 1.91 kW rear right and front right - rapid burner - each rated at 3.22 kW centre rear - ultra rapid burner - rated at 5.1 kW z The semi rapid burners are especially suited for use with small pan ...

  • Aga Ranges DC6 (FFD) - page 25

    IMPORT ANT SAFETY CONSIDERA TIONS z Simmering aids such as asbestos or mesh mats are not recommended. They can impede burner performance, damage the pan support s and waste fuel. z Commercially available foil spillage aids are unnecessary on this cooker and could effect the combustion. z Some ‘Wok’ cooking pans are unst able. Check with the ‘ ...

  • Aga Ranges DC6 (FFD) - page 26

    TO FIT P AN SUPPORTS Fit the pan support s in the following order . The pan support s are marked on the underside to correspond to the markings below . The pan support s must locate in the recesses in the hotplate casting. Import ant It is very important for the performance and reliability of the hob that the p an supports are fitted in accordance ...

  • Aga Ranges DC6 (FFD) - page 27

    SETTING UP THE COOKER FOR USE Before you can use the lower left hand oven of the appliance it will be necessary to set the ‘time of day’ clock. This is a 24 hour clock, and when the power supply is initially switched on, or after an interruption in supply , the clock will show AUTO and 0.00 alternately . SETTING THE TIME OF DA Y 1. Press and ho ...

  • Aga Ranges DC6 (FFD) - page 28

    THE SIMMERING OVEN This is used for long, slow cooking over 6-8 hours, keeping food warm and warming plates for short periods. EXTRA CARE MUST BE T AKEN WHEN W ARMING BONE CHINA - USE THE LOWEST SETTING . The slow cooking setting is the area marked between 225ºF - 250ºF on the oven control knob. USING THE SIMMERING OVEN SETTING Points to bear in ...

  • Aga Ranges DC6 (FFD) - page 29

    IDEAS FOR THE SIMMERING OVEN Many favorite recipes can be adapted for this type of cooking. Check that chosen ovenware will fit into the oven. Meal 1 6 - 8 hours cooking Ragout of Beef in Ale Baked Potatoes Recipes Ragout of Beef in Ale 30ml (2tbs) oil 1. Sauté the meat in hot oil in a flame proof casserole dish until 675g (1 1/2 lbs) chuck steak, ...

  • Aga Ranges DC6 (FFD) - page 30

    Meal 2 6 - 8 hours cooking Roast Fillet of Lamb Dauphinoise Potatoes Bread and Butter Pudding Recipes Roast fillet of Lamb 900g - 1.25 kg (2-2 1/2 lbs) lamb 1. Season and wrap the lamb in foil. 2. S tand meat on a rack (if possible) over a small shallow tin. Dauphinoise Pot atoes 450g (1lb) potatoes, thinly sliced 1. Grease a shallow oval or rectan ...

  • Aga Ranges DC6 (FFD) - page 31

    Meal 3 6 - 8 hours cooking Ham and Apricot Pie Braised Red Cabbage St. Clements Pudding Recipes Gammon and Apricot Pie 2 ham slices approx 15mm ( 1/2 ”) thick 1. Remove the rind from the ham. Nick the edges and lay them 100g (4oz) no-soak dried apricots in a shallow dish. 25g (1oz) raisins 2. S prinkle with apricots, raisins and pepper . 3 large ...

  • Aga Ranges DC6 (FFD) - page 32

    Meal 4 Chilli Con Carne Frangipane and Apple Pudding Recipes Chilli Con Carne 450g (1lb) minced beef 1. Brown the minced beef in a flame proof casserole dish. 1 x 400g (14oz) can tomatoes 2. S tir in the spice mix. 1 x 400g (14oz) can kidney beans 3. Add beans drained, tomatoes and water . 1 packet Chilli con carne spice mix 4. Mix well together . ...

  • Aga Ranges DC6 (FFD) - page 33

    BROILING OVEN z THE BROILING COMP ARTMENT DOOR MUST BE KEPT OPEN WHEN THE BROILER IS ON. z CAUTION: Accessible part s may be hot when the broiler is in use. Y oung children should be kept away . z The very high speed instant broiler is divided into two areas to save energy and to suit individual broiling requirements. z T urn the broiler control cl ...

  • Aga Ranges DC6 (FFD) - page 34

    General z The ovens and broiler compartment are fitted with side and back self-cleaning p anels. The roof of the oven is also self-cleaning enamel. z The shelves are designed to be non-tilt. z T o remove a shelf, lift clear of the side notches and slide forward. T o replace a shelf, insert into the oven with the short prongs at the rear , facing up ...

  • Aga Ranges DC6 (FFD) - page 35

    Cooking Hint s z Shelf positions are counted from the bottom. z Put dishes in the centre of the shelf. z When using the fan oven, reduce conventional oven settings by 50ºF - 75ºF and in some cases, cooking time by up to 10 minutes for every hour . z It is important to check that food is piping hot before serving. z Y ou can change the setting and ...

  • Aga Ranges DC6 (FFD) - page 36

    z The right hand upper oven is a conventional oven which means that the heating elements are in the top and under the base of the oven compartment. z The cooking charts are a general guide but times and temperatures may vary according to individual recipes. z The meat sections should be used as a general guide but may vary according to the size, sh ...

  • Aga Ranges DC6 (FFD) - page 37

    37 APPROXIMA TE COOKING TIME FOOD SETTING °F SHELF POSITION 45 mins 275 - 300 1 or 2 2 1 2 or 3 1 or 2 3 3 2 or 3 3 3 1 or 2 1 1 1 or 2 2 or 3 2 or 3 2 or 3 2 or 3 2 or 3 2 or 3 2 or 3 2 or 3 2 or 3 2 210 - 225 3 - 4 hours - T urn meringues over as soon as they are set Meringues Y east Mixture 30 - 45 mins Bread - loaves 425 - 450 15 - 20 mins Bre ...

  • Aga Ranges DC6 (FFD) - page 38

    Whole Fish e.g. trout, mackerel Steaks Oven-fried fish Salmon (2.7kg) Meat & Poultry Beef Lamb Pork Chicken T urkey Duck & Goose Casserole Puddings Milk Puddings Baked Custard Baked Sponge Pudding Fruit Crumble Baking Oven • Baking Oven • Baking Oven • Baking Oven • Baking Oven • Baking Oven • z The left hand lower oven is a fan ...

  • Aga Ranges DC6 (FFD) - page 39

    • Baking Oven • Baking Oven • Baking Oven • Baking Oven • Baking Oven • Baking Oven • Baking Oven FOOD SETTING °F APPROXIMA TE COOKING TIME Meringue T oppings 250 45 mins 3 - 4 hours - T urn meringues over as soon as they are set 30 - 45 mins 15 - 20 mins 25 - 35 mins 20 - 25 mins 25 - 30 mins 7 - 10 mins 20 mins 10 - 15 mins 1 hour ...

  • Aga Ranges DC6 (FFD) - page 40

    The minute timer works separately from the time of day clock and can be set to time periods from 1 minute to 23.59 hours. Only a one handed operation is required. SETTING THE MINUTE TIMER 1. Press the MINUTE TIMER button the bell symbol and 0.00 will be displayed. Set the required time by using the plus + and minus - buttons. 2. After 5 seconds the ...

  • Aga Ranges DC6 (FFD) - page 41

    This can be used to set an automatic cooking program in the Baking Oven only . It switches the electricity on and off at the pre-set times. The maximum length of cooking program which can be set is 23 hours and 59 minutes e.g. delay time + cooking time = maximum 23 hours and 59 minutes. Before setting a program check that the clock is telling the c ...

  • Aga Ranges DC6 (FFD) - page 42

    KEY LOCK If this mode is activated, a program can be set, but it will not be function, ie. ON and OFF times will be set, but the timer will not switch the ovens on. T O ACTIV A TE KEYLOCK FUNCTION 1. Ensure the timer is in manual mode (no active programs). 2. Hold the MINUTE TIMER button and COOK TIME button simult aneously for approximately 8 seco ...

  • Aga Ranges DC6 (FFD) - page 43

    COOKER P ART AND FINISH V itreous Enamel Broiling - base only Hotplate Control panel Pan supports Roasting tin Broiling pan Roasting, simmering & fan oven - base only Door liners Front of cooker Doors High T emperature Protective Coating Hand rail bracket Burner caps Burner heads Plinth Glass Broiler element cover S plashback S t ainless Steel ...

  • Aga Ranges DC6 (FFD) - page 44

    COOKER P ART AND FINISH Self-Clean Enamel Roasting and baking oven, sides, roof & back panels Simmering oven - sides & back panel Broiling compartment - side & back p anels Aluminum Right & left rear outer burner cap s Right front outer burner cap Centre front outer burner cap CLEANING METHOD This special enamel has a continuous cle ...

  • Aga Ranges DC6 (FFD) - page 45

    Oven Shelves - These shelves are designed to slide out Broiler Shelf - operates as oven shelves STOP ON SHELF MUST PROJECT UPW ARDS SHELF STOP AND ANTI -TIL T BRACKET Refit as follows: Locate in guide as above. Please Note: Shelf slides out to stop position. Fig. 17A Fig. 17B DESN 51 1867 DESN 51241 1 DESN 51 1866 45 ...

  • Aga Ranges DC6 (FFD) - page 46

    46 ASSEMBL Y OF RAPID AND SEMI-RAPID BURNER FITTING BURNER CAP - RAPID AND SEMI-RAPID BURNER BURNER CAP BURNER HEAD ELECTRODE BURNER CAP RET AINING LUGS DESN 51 1618 DESN 51 1617 Fig. 18 Fig. 19 ...

  • Aga Ranges DC6 (FFD) - page 47

    47 DESN 513512 Fig. 20 WOK BURNER DESN 513714 Fig. 20 A UL TRA RAPID BURNER ...

  • Aga Ranges DC6 (FFD) - page 48

    Servicing Section Remember , when replacing a part on this appliance, use only spare p arts that you can be assured conform to the safety and performance specification that we require. Do not use reconditioned or copy part s that have not been clearly authorized by AGA. 48 ...

  • Aga Ranges DC6 (FFD) - page 49

    z COMPLETEL Y ISOLA TE FROM ELECTRIC SUPPL Y BEFORE SERVICING . z In the event of your appliance requiring maintenance, please call Aga-Ranges Service or contact your authorized distributor . z Y our cooker must only be serviced by a qualified engineer from an authorized distributor . z Do not alter or modify the cooker . z Only the spares specifie ...

  • Aga Ranges DC6 (FFD) - page 50

    50 Fig. 23 DESN 512393 C Fig. 22 DESN 512935 A W ARNINING: WHEN SERVICING OR REPLACING GAS CARR YING COMPONENTS, DISCONNECT GAS SUPPL Y TO APPLIANCE AND AFTER COMPLETION CHECK APPLIANCE FOR GAS SOUNDNESS. W ARNING: WHEN SERVICING OR REPLACING COMPONENTS, ISOLA TE THE APPLIANCE FROM THE ELECTRIC SUPPL Y AND BEFORE RE-CONNECTING , CHECK FOR ELECTRICA ...

  • Aga Ranges DC6 (FFD) - page 51

    51 Fig. 25 DESN 512400 A Fig. 24 DESN 512407 B B. TO REMOVE SIDE P ANELS 1. Isolate from electric supply . 2. Proceed as ‘TO REMOVE HOTPLA TE CASTINGS’. 3. Lower the cooker onto the rollers by turning the adjusting feet fully counter-clockwise. NOTE: It may be necessary to disconnect the flexible gas connection to allow the cooker to be withdra ...

  • Aga Ranges DC6 (FFD) - page 52

    D. TO REMOVE HANDRAIL (SEE FIG . 25) 1. Loosen 2 grub screws, one at each end of hand rail (see fig. 25) using 3/32” socket key . 2. Slide handrail forwards, off locating studs. E. TO REMOVE TIMER 1. Isolate from electric supply . 2. Proceed as ‘TO REMOVE HOTPLA TE CASTINGS’. 3. Remove fixing screws (4). T wo top rear and two lower front of t ...

  • Aga Ranges DC6 (FFD) - page 53

    E. TO REMOVE GAS T APS/IGNITION SWITCHES 1. Isolate from electric and gas supply . 2. Proceed as ‘TO REMOVE HOTPLA TE. 3. Proceed as ‘TO REMOVE F ACIA ’. 4. Disconnect gas rail feed pipe (19mm nut). (See Fig. 28). 5. Disconnect all gas connections to tap s (5 nuts - 13mm, 14mm & 19mm). 6. Remove (4) screws fixing gas rail. 7. Disconnect i ...

  • Aga Ranges DC6 (FFD) - page 54

    F . TO REMOVE GRILL REGULA TOR 1. Isolate from electric supply . 2. Proceed as ‘TO REMOVE F ACIA CASTINGS’. 3. Remove two screws securing control to control mounting panel. 4. Withdraw control and cables taking care not to strain the cables. 5. Disconnect cables from the control. NOTE : T ake care to identify terminations. 6. Re-assemble in rev ...

  • Aga Ranges DC6 (FFD) - page 55

    I. TO REMOVE ELECTRODES (LHR, CF , CR, RHR, RHF BURNERS) 1. Isolate from electric supply . 2. Proceed as ‘TO REMOVE THE HOTPLA TE’. 3. Proceed as ‘TO REMOVE SP ARK GENERA TOR’ disconnect the appropriate electrode lead. 4. Withdraw clip securing electrode to burner and withdraw lead and electrode (See Fig. 30). 5. Re-assemble in reverse orde ...

  • Aga Ranges DC6 (FFD) - page 56

    K. TO REMOVE THERMOCOUPLE (LHF BURNER) 1. Isolate from electric supply . 2. Proceed as ‘TO REMOVE THE HOTPLA TE’. 3. Undo the nut fixing the thermcouple in place. 4. Push the thermocouple down and pull out from under the burner . 5. Disconnect the other end of the thermcouple cable from the gas valve. This is a push on jack connector . 6. Re-as ...

  • Aga Ranges DC6 (FFD) - page 57

    L. TO REMOVE THERMOCOUPLE (LHR, RHR, RHF BURNERS) 1. Isolate from electric supply . 2. Proceed as ‘TO REMOVE THE HOTPLA TE’. 3. Undo the nut fixing the thermocouple in place. 4. Push the thermocouple down and slide to the side to remove from the burner . 5. Disconnect the other end of the thermcouple cable from the gas valve, this is a push on ...

  • Aga Ranges DC6 (FFD) - page 58

    N. TO REMOVE ELEMENTS (RH OVENS) 1. Isolate from electrical supply . 2. Proceed as T O REMOVE OVEN AND BROILER LINERS’. 3. Remove oven base panel (1) screws at the rear of the oven. 4. Lift out base p anel. 5. Remove oven element fixing screws (2) at the rear of the oven and flex elements to remove from location bracket, pull forwards to expose t ...

  • Aga Ranges DC6 (FFD) - page 59

    59 ...

  • Aga Ranges DC6 (FFD) - page 60

    60 For further advice or information contact your local Aga distributor With AGA ’s policy of continuous product improvement, the Company reserves the right to change specifications and make modifications to the appliance described at any time. 1050 Fountain S treet North Cambridge Ontario N3H 4R7 Canada Business: (519) 650-5775 Fax: (519) 650-37 ...

Fabricant Aga Ranges Catégorie Oven

Les documents que nous recevons du fabricant de l'appareilAga Ranges DC6 (FFD) peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Aga Ranges
- manuels d’utilisations DC6 (FFD)
- fiches produit Aga Ranges
- dépliants
- ou étiquettes-énergie Aga Ranges DC6 (FFD)
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Aga Ranges DC6 (FFD).

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Aga Ranges DC6 (FFD), manuels d’entretien, brefs manuels ou manuels de l’utilisateur Aga Ranges DC6 (FFD). Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Aga Ranges DC6 (FFD).

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Aga Ranges DC6 (FFD), quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Aga Ranges DC6 (FFD) par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Aga Ranges DC6 (FFD).

Le manuel d’utilisation complet Aga Ranges, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Aga Ranges DC6 (FFD) - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Aga Ranges DC6 (FFD), FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lAga Ranges DC6 (FFD) qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Aga Ranges DC6 (FFD) - qui devraient nous aider dans les premières étapes lors de l'utilisation Aga Ranges DC6 (FFD)
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Aga Ranges DC6 (FFD)
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Aga Ranges DC6 (FFD) dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Aga Ranges DC6 (FFD)?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Aga Ranges DC6 (FFD), avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Aga Ranges DC6 (FFD) il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)