Français dropdown-ico

Manuel d’utilisation Frymaster 819-6213

32 pages 2.37 mb
Télécharger

Aller à la page of 32

Summary
  • Frymaster 819-6213 - page 1

    Frymaster, a member of the Co mmercial Food Equipm ent Serv ice Association, recommends using CFESA Certified Tec hnicians. Price: $6.00 *8196213* 24-Hour Service Hotline 1-800-551-8633 819-6213 NOV 08 HCP Installation, Operation Manual 2 and 4-Slot Models Operated by a Palm-based PDA ...

  • Frymaster 819-6213 - page 2

    THIS PAGE INTENTIONALLY LEFT BLANK ...

  • Frymaster 819-6213 - page 3

    NOTICE IF, DURING THE WARRANTY PERIOD, THE CUS TOMER USES A PART FOR THIS ENODIS EQUIPMENT OTHER THAN AN UNMODIFIED NEW OR RECYCLED PART PURCHASED DIRECTLY FROM FRYMASTER/DEAN, OR ANY OF ITS AUTHORIZED SERVICE CENTERS, AND/OR THE PART BEING USED IS MODIFIED FROM ITS ORIGINAL CONFIGURATION, THIS WARRANTY WILL BE VOID. FURTHER, FRYMASTER/DEAN AND IT ...

  • Frymaster 819-6213 - page 4

    Table of Contents Installation, Warranty, Parts 1-1 HCP Software Quick Start 2-1 Power Up 3-1 Operational Overview 4-1 Programming Overview 4-4 Entering Passwords Adding Menu Items 5-1 Programming 6-1 Changing from 4 to 2-Slot Operation 6-2 Moving Products from Food Li brary to Menus 6-2 Setting up Cabinet on Palm 6-2 Saving Cabinets 7-1 Loading Sa ...

  • Frymaster 819-6213 - page 5

    HCP 1-1 1 HCP The Frymaster HCP is a short-term holding device to extend the freshness of a wide variety of cooked products. 1.1 Warranty Statement A. Frymaster L.L.C. makes the following lim ited warranties to the original purchaser only for this equipment and replacement parts: 1.1.1 Warranty Provisions – Universal Holding Cabinet A. Frymaster ...

  • Frymaster 819-6213 - page 6

    HCP 1-2 There are no implied warranties or merchantability or fitness for any particular use of purpose. For international warranty, the a bove procedures apply, except that the customer is responsible for freight and duty charges. PARTS ORDERING AND SERVICE INFORMATION Parts orders may be placed dire ctly with you r local Frymaster F actory Author ...

  • Frymaster 819-6213 - page 7

    HCP 2-1 HCP Software Quick Start Using the HCP software requires food items be established in a food library, menus to be established and cabinet c onfigurations t o be set, which are built from the menus. The software is loaded with generic items. Restaurant-specific items will need to be added. Below is a quick look at this process with reference ...

  • Frymaster 819-6213 - page 8

    HCP 3-1 3 Power Up ALL ELECTRICALLY OPERATED APPLIANCES MUST BE ELECTRICALLY GROUNDED IN ACCORDANCE WITH LOCAL CODES, OR IN THE ABSENCE OF LOCAL CODES, WITH NATIONAL ELEC TRIC CODE, ANSI/NFPA NO. 70-1990. A. Power Requirements: • Voltage – 208/240 VAC • 2620 Watts @ 208V – 3420 Watts @ 240V • Frequency – 50/60 Hertz • Single Phase • ...

  • Frymaster 819-6213 - page 9

    HCP 4-1 4 Operational Overview The HCP is available in two and f our-slot models. Each slot has a c ontroller, which indicates product and holding time for each of three tray positions within a slot. The controlle r has a timer button for each tray position, a menu button and a tem perature display button. Individual bu tto ns are annotated below. ...

  • Frymaster 819-6213 - page 10

    HCP 4-2 4.1 Cabinet Operation 1. Turn the power switch ON. 2. The displays will light and show LOW TEMP . 3. Press the Menu key to scroll to the desired menu, release the key and immediately press the Temperature key. The chosen menu is locked in. Menu or other setting ch anges require a Palm Pilot PDA and related software. Programming the cab inet ...

  • Frymaster 819-6213 - page 11

    HCP 4-3 4.4 Turning Slots OFF Press the Menu key on a slot until Slot Off is displayed. Release th e key and immediately press the Temperature key; the choice is locked in. 4.5 Temperature Display Press the Temperature key four tim es and the temper atures and setpoints will be dis played in this sequence: • Top plate temperature • Bottom plate ...

  • Frymaster 819-6213 - page 12

    HCP 4-4 4.6.4 Rise-Time Alarm A rise-time alarm indicates th e slot temperatur e failed to reach operating tem p erature within a preset time after start up. The displayed message is Slot Rise Rate . An audible alarm sounds. Press a timer key to turn off the a udible alarm . Service is required to correct a rise-time alarm. 4.6.5 Additional Out of ...

  • Frymaster 819-6213 - page 13

    HCP 4-5 4.7 Programming Overview A Palm Pilot loaded with the HCP software is available. All programming of the cabinet, except initial default settings, is first enter ed into a Palm Pilot then beam ed into th e HCP. Below is an annotated look at the main HCP screens on a Palm Pilot. Programming and use are covered in Chapters 5 and 6. See the Pal ...

  • Frymaster 819-6213 - page 14

    HCP 4-6 Menu bar Tapping View produces a pull-down menu of selections. In many cases these items access features also accessi b le with buttons on the software interface. Cabinet , which is not accessible otherwise, opens a menu for changing the setup of the cabinet from two to four slots. It also provides access to the menu for calibration and rea ...

  • Frymaster 819-6213 - page 15

    HCP 4-7 Cabinet Display Shown anytime a menu is chosen from the Menu pull-down in the top right corner. Food items for slot positions are chosen by tapping on the triangle in each slot window. Menu Indicates menu on the Palm from which food items are being selected. It will also be the name of the cabinet configuration beamed to the HCP. i This is ...

  • Frymaster 819-6213 - page 16

    HCP 5-1 5 Opening the HCP Software Turn the Palm Pilot ON and tap on the software menu item (likely to be All) displayed in the right top corner. A drop-down menu lists groupings of software and other functions. Highlight Utilities by tapping on it. See figure 1. The HCP icon shows on the screen. Tap it. The Setup screen is displayed. See figure 2. ...

  • Frymaster 819-6213 - page 17

    HCP 5-2 5.2 Entering Menu Items Step 2: NewO appears highlighted in the Food Library window. With the NewO item highlighted, tap the Edit button. Step 1: Enter a password as described in section 5.1. Menu items are added by clicking the add button in the Food Library window. See arrow. Step 5: Use the backspace key to eliminate the NewO item text. ...

  • Frymaster 819-6213 - page 18

    HCP 5-3 5.3 Changing Menu Name/Deleting Menus Step 7*: Use the vertical slider on the right side of the screen to access four more option s and adjust them for the new product. Tap OK and the new item is stored in the Food Library and can be moved to a menu for transfer to the HCP. Step 1: Go to the menu window by clicking the Menu… button in the ...

  • Frymaster 819-6213 - page 19

    HCP 6-1 6 Programming the HCP A PDA with HCP software installed must be used to alter or add to the menu items stored in th e HCP cabinet. A Palm Pilot with the software loaded is available (106-6658) for the HCP. Other Palm models can be used, however, they must have version 4.0 or later of the Palm operating system. The Palm and its HCP software ...

  • Frymaster 819-6213 - page 20

    HCP 6-2 6.2 Moving Products from the Food Library to the Menu 6.3 Setting Up the Cabi net on a Palm Pilot Step 1: Tap Menu in the top right corner. The Setup menu is displayed. Choose Menu number by tapping on the word. In this example, Menu 1 is configured. Note: These steps should be repeated to configure the cabinet for each menu. All five of th ...

  • Frymaster 819-6213 - page 21

    HCP 6-3 Step 4: Choose a product for each slot. All the products in a slot must have compatible setpoints. Repeat these steps to configure the cabinet for each menu. NOTE: All five of the menu configurations are transferred to the cabinet each time menu changes are beamed into the HCP cabinet. Step 5: The cabinet should now be configured for all fi ...

  • Frymaster 819-6213 - page 22

    HCP 7-1 7 Saved Cabinet Configurations The Saved Cabinet feature allows cabi net configurations to be loaded and stored permanently in the Palm Pilot. These configurations, reflecting daily, weekend and special menu setups for all five of the menus retained in the HCP cabinet, can be recalled and beam ed into multiple HCP cabinets. This feature is ...

  • Frymaster 819-6213 - page 23

    HCP 7-2 7.2 Loading Saved Cabinets Step 4: Click in the desired field on the dialog box and click on the abc icon at the bottom left (see arrow) to display a keyboard for name and description entry. Step 5: Use the keyboard to enter a name. Indicate in the name if the saved configuration is for a 2-slot cabinet when appropri ate. Click Done when co ...

  • Frymaster 819-6213 - page 24

    HCP 7-3 7.3 Deleting Saved Cabinets Step 1: From the menu screen, click the i icon. Step 2: Highlight the saved cabinet to eliminate. Step 3: A dialog asks are you sure you want to delete the cabinet. Click Yes if sure. Step 4: The highlighted cabinet is removed from the saved cabinet list. Click cancel to leave the Saved Cabinet dialog box. Highli ...

  • Frymaster 819-6213 - page 25

    HCP 8-1 8 Fahrenheit to Celsius A password must be entered to ch ange the tem perature display. See Password Access in Chapter 5. The temperature display is accessed from the Language button on the Setup Screen. See figure 1 . The temperature change tak es place immediately after selection. 8.1 Changing Temperature Display Figure 1: Arrow points to ...

  • Frymaster 819-6213 - page 26

    HCP 9-1 9 Uploading Cabinet Configur ations and Daily Activity The cabinet records daily activity and the data can be uploaded to the Palm each day prior to turn ing the cabinet off. This can be done at anytime. Also, the cabinet prompts for the data to be uploaded when the HCP is put in the clean mode. See Page 4-2. A cabinet’s configuration can ...

  • Frymaster 819-6213 - page 27

    HCP 10-1 10 Loading Software fo r the Palm A Palm Pilot loaded with the HCP software is av ailable from Frym aster as an accessory (Part # 106- 6658). HCP software, which can be loaded on a Palm PDA is a on a CD. A Palm operating system of 4.0 or higher is required to operate the software. See the Pa lm manual for instructions on installing, operat ...

  • Frymaster 819-6213 - page 28

    HCP 10-2 10.2 Loading Software on Palm These instructions assume Palm de sktop software is installed on your computer and a Palm with an operating system of 4.0 or higher is attached to the computer. So me familiarity with the Palm desktop software is also necessa ry. See the Palm manual for instru ctions on installing, operating and deleting softw ...

  • Frymaster 819-6213 - page 29

    HCP 10-3 Step 6 :The Palm’s Add-on folder should open. If not, navigate to it by clicking the folder icon. See Arrow. When the Palm folder is visible in the dialog box, double-cli ck it and its contents will be displaye d. Figure 7: Double-click the Add-on folder and its contents are displayed. Hold do wn the control key and single-click all file ...

  • Frymaster 819-6213 - page 30

    HCP 10-4 10.3 Beaming Palm Software Between Palms The HCP software can be beamed, or tr ansferred, from one Palm to another by merely placing the units head to head and choosing Beam from a drop-down menu. Follow these steps to beam software betw een units. See the Palm manual for instructions on installing, ope rating and deleting software from th ...

  • Frymaster 819-6213 - page 31

    THIS PAGE INTENTIONALLY LEFT BLANK ...

  • Frymaster 819-6213 - page 32

    Frymaster, L.L.C., 8700 Line Av enue, Shrev eport, Louisiana 71106 TEL 1-318-865-1711 FAX (Parts) 1-318- 219-71 40 FAX (Tech Support) 1-318-219-7135 Price: $6.00 PRINTED IN THE UNITED STATES SERVICE HOTLINE 1-800-551-8633 819-6213 NOV 08 ...

Fabricant Frymaster Catégorie Fryer

Les documents que nous recevons du fabricant de l'appareilFrymaster 819-6213 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Frymaster
- manuels d’utilisations 819-6213
- fiches produit Frymaster
- dépliants
- ou étiquettes-énergie Frymaster 819-6213
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Frymaster 819-6213.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Frymaster 819-6213, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Frymaster 819-6213. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Frymaster 819-6213.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Frymaster 819-6213, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Frymaster 819-6213 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Frymaster 819-6213.

Le manuel d’utilisation complet Frymaster, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Frymaster 819-6213 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Frymaster 819-6213, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lFrymaster 819-6213 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Frymaster 819-6213 - qui devraient nous aider dans les premières étapes lors de l'utilisation Frymaster 819-6213
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Frymaster 819-6213
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Frymaster 819-6213 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Frymaster 819-6213?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Frymaster 819-6213, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Frymaster 819-6213 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)