Français dropdown-ico

Manuel d’utilisation EverFocus EZN3260

87 pages Non applicable
Télécharger

Aller à la page of 87

Summary
  • EverFocus EZN3260 - page 1

    EZ N Series Outd oor IR Bull et IP Camera User’s Manual Copyright © EverFocus Electronics Co rp, Release Date : March , 20 13 ...

  • EverFocus EZN3260 - page 2

    Copyrig ht  201 3 EverFocus Electronics Corp . All rig ht s reserved. No part of th e content s of this ma nual ma y be reproduce d or tran smitted in any form or by any me ans with out written permis sion of t he Ever F ocus Elec tronics Corpora tion. EverFoc us 12 F, No .79 , Se c. 1, Shin - Tai Wu Road, Hsi - Chih , T aipe i, Ta iwan TEL: +8 ...

  • EverFocus EZN3260 - page 3

    i About this docu ment All t he safety an d opera ting ins truct ions s hould be read and fol lowed befor e the unit is oper ate d. This manual should be re taine d for fu ture re fere nce. The inf ormation in this manual was current whe n published. The manufact urer reserves the righ t to revise and impr ove its products. All s pecifications are ...

  • EverFocus EZN3260 - page 4

    ii P r ecautions 1. Do not instal l the cam era near e lectric or m agnetic fields. Install the camera away from TV/radio transmitters, magnets, el ectric motors, tra nsformers and audio speakers since the electromagnetic fiel ds generated from these devices may distort the video imag e or otherw ise inter fere with cam era operation. 2. N ever dis ...

  • EverFocus EZN3260 - page 5

    iii TABLE OF CONTENTS 1. I ntroducti on ..................................................................................................................................... 1 2. Featur es ........................................................................................................................................... 2 3. Overvi ew ...... ...

  • EverFocus EZN3260 - page 6

    iv 7.3 Network ....................................................................................................................................... 29 7.3.1 Network ..................................................................................................... 29 7.3.2 DDNS .................................................................. ...

  • EverFocus EZN3260 - page 7

    EZN Series 1 1. I ntrod uction The E Z N series is an outdoor bullet camera deliver ing image quality of up to 3 - megapixel. The camera suppor ts both H .264 and MJ PEG co mpress ion fo rmats . The I P66 - rat ed and vandal proof housing make it suitabl e for outdo or use. The IR LE Ds are als o implemented for in frared illumination in night visi ...

  • EverFocus EZN3260 - page 8

    EZ N Series 2 2. F eatur e s • 1/3” Pana sonic CMOS sensor (f or E Z N3160 / 3260 ) 1/2.8” Sony CMOS sens or (for E Z N3340 ) • Triple streams (stream 1 / 2 / 3 from H.264 or MJ PEG) • Up to 30 fps a t 1920 × 10 80 Supports 15 fp s at 2048 x 1536 (only for E Z N3 34 0 ) • Built - in micro SD / S DHC card slot • Removable IR - cut fi ...

  • EverFocus EZN3260 - page 9

    EZ N Series 3 3. Overvi ew 1 2 3 4 5 6 7 8 9 No. Name Description 1 Tes t Output Connec ts to a handhel d tes t monitor for adjus ting came ra focus and zoom . 2 Focus / Zoom Control Press this control t o the left or right to adjust cam era focus. To zoom i n / out the cam era vie w, pres s this contr ol up o r down. 3 R eset B utton Resets all co ...

  • EverFocus EZN3260 - page 10

    EZ N Series 4 4. Installation 4.1 Pack ing Li st Ple ase ch eck tha t the re is no mis sing i tem in the pa ckage before instal ling. • EZ N Series Camera x 1 • 4- Pin Terminal B lock x 1 • Quick Mounting Ring x 1 • Software CD x 1 • RJ - 45 Connecto r x 1 • Quick I nstallation Guide x 1 • Mounting Kit x 1 • Test - Ou t C able x 1 - ...

  • EverFocus EZN3260 - page 11

    EZ N Series 5 4.3 Basic Insta llation This section will in troduce the basic ins tallation on mounting / w iring the camera, inse rting a micro SD card and adjusting cam era focus / zoom. 4.3.1 Mounting and Wiring Foll ow the step s below fo r moun ting and wiring the camera. 1. Before screwing t he camera to the w all, drill four hol es on the wal ...

  • EverFocus EZN3260 - page 12

    EZ N Series 6 b. If you want to wir e the c ables through the wa ll, f eed th e cables thro ugh t he wall and t hen screw the camera base to the Quick - Mounting Ring . Camera Base Quick-Mounting Ring Cables 5. Connec t the network , po wer and other cables of the came r a to the related devices. Pleas e refer to 4.2 Cable s . 6. Optionally insert ...

  • EverFocus EZN3260 - page 13

    EZ N Series 7 4.3.2 Ins erti ng a Micr o SD Car d You can optionally inser t a micro SD car d into the card slot o n the camera module f or recording videos. 1. Remo ve the S unshi eld fr om the ca mera. Loose n the s crew o n the Sunshi eld usi ng the provi ded hexago n wrenc h. Sli de the S unshiel d out from the rail on the camer a body . Screw ...

  • EverFocus EZN3260 - page 14

    EZ N Series 8 4.3.3 Adjusting Camera Focus / Zoom After wiring the cabl es, you can adjust the ca mer a focus and zoom fo r bet ter image quality. Note: Aft er opening the camera cover for adj usti ng the ca mera focus a nd zo om , you hav e to close the cover immediately in case of re ducing the absorption capacit y of the desic cant bag i nside t ...

  • EverFocus EZN3260 - page 15

    EZ N Series 9 5. Accessing the User Int erface This section e xplains how to acces s the Web in terfac e of the cam era for co nfigurati on. 5.1 Checking the Dynamic IP Address You can loo k up th e IP a ddress and ac cess the W eb inter face of the c amera using th e IP Utili ty (IP U) softwa re inc luded i n the softwar e CD. Pleas e connec t the ...

  • EverFocus EZN3260 - page 16

    EZ N Series 10 5. To cha nge the IP se ttings , do uble - click the values i n the colum n and ty pe the numbers or se lect an optio n. C lick Set I P Address to save the se tting s. Note: Most netwo rks su pport DHCP pr otocol, bu t if you are uns ure of you r netw ork protocol, please consul t your IP administrator for network c onfiguration deta ...

  • EverFocus EZN3260 - page 17

    EZ N Series 11 5.2 Settings for Microsoft Inte rnet Explorer To enable Remo te Live View, Firmware U pgrade and Ac tiveX Prompt on Interne t Explorer, some settings have to be com ple te. Ple ase foll ow t he steps below: 1. On the com puter, clic k Start > C ontrol Panel > Syst em and Security > Acti o n Center (click Chan ge User A ccoun ...

  • EverFocus EZN3260 - page 18

    EZ N Series 12 3. In the Down load unsig ned Activ eX contro ls field, select Pro mp t . In th e Include local directory path when uplo ading files to a server field, select Enable . Click OK . 4. In the In terne t Optio ns w indow, c lick the Advanced tab and then dis able Enable memory protection to hel p mitiga te online atta cks . Click OK . ...

  • EverFocus EZN3260 - page 19

    EZ N Series 13 5.3 Connecting the Camera to the Network There are t hree me thods to conn ect the IP cam era to the network : Route r or LAN Conn ection , Dir ec t High - Speed Conn ection and One - to - One Conne ction . Router o r LAN conne ction This is the most comm on connection in which the IP camera is connected to a r outer and allows multi ...

  • EverFocus EZN3260 - page 20

    EZ N Series 14 Direct H igh - Speed Connecti on In a Direct High - S peed C onnec tion, t he cam era c onnects direc tly to a mode m wit ho ut the ne ed for a router . You need to set the st atic o r dynam ic WA N IP add ress a ssigne d by your IS P (Inte rnet S ervic e Provider) in the camera’s configuration web pages. To access the camera, just ...

  • EverFocus EZN3260 - page 21

    EZ N Series 15 5.4 Live Vie w Window 1. Pre ss the but ton to dis play the " Live View" window . Doubl e - clic k on the image to show a f ull - screen display, double - click again or pr ess ESC to return to the normal display. If you experi ence v ideo feed lag time (if c onnecte d via I nterne t), y ou can r educe the res olu tion or l ...

  • EverFocus EZN3260 - page 22

    EZ N Series 16 2. Pre ss the butto n to pla y the recor ded da ta direc tly fr om the on - camera M icro SD / SDHC card (for this funct ion to be come ac tive, you hav e to i nsert a M icro SD / SDHC card in the Mic ro SD / SDHC card slot on t he rear pane l of t he camera. Se e 7.8.3 S D Card . 3. Pre ss the but ton to e nter the Se ttings page. O ...

  • EverFocus EZN3260 - page 23

    EZ N Series 17 9. Reco rd The R ecor d butto n is us ed to r ecord the cur ren t video s tream. Click th e Recor d bu tton to start / stop rec ording. This ico n is only for one - minute video rec ording. To record long - period recordings, please set a rec or ding schedul e (See 7.7. 5 Schedule ). The locati on on your compute r, where the image f ...

  • EverFocus EZN3260 - page 24

    EZ N Series 18 : Select betwe en 1X and 4X and the n clic k the icons to change th e focus s peed. 14. Status Dis play (in fo line that can be place d abov e video box or at bott om of pa ge) This shows the name of the camera that is currently active or being configured, current date/time and c urrent frame r ate. You ca n activa te th ese i nfo di ...

  • EverFocus EZN3260 - page 25

    EZ N Series 19 6. Playback You can remotely play back the recordi ngs stored in the on - camera micro SD card on the Web interface, or play bac k the recor dings stored in the compu ter u sing t he ARV View er incl uded i n the s oftwar e CD. Playba ck is de signe d as a quick w ay to check rece nt reco rdings that w ere t rigger ed by Ev ents that ...

  • EverFocus EZN3260 - page 26

    EZ N Series 20 Search b y File: Click the Sear ch butto n to se arch for all recor ding fi les on the o n - camera SD card. Search results will be displayed in the File name area. Search b y Time: Click th e cale ndar ic on and selec t the date a nd time from whic h you w ant to searc h until t he pres ent m omen t. Clic k search to get yo ur searc ...

  • EverFocus EZN3260 - page 27

    EZ N Series 21 6.2 Setting Up the P layback Function Note t hat the Play back f unction w ill not be active until the user has inse rted a micro SD car d in the camera’s micro SD car d slot. The card may also have to be formatted in t he Settings submenu. Micro SD Card Slot 6.2.1 Prep ari ng th e Mi cro SD C ard Once y ou inse rt a f unctio nal M ...

  • EverFocus EZN3260 - page 28

    EZ N Series 22 6.2.2 Testing the Playback Function 1. Once the mic ro SD card i s det ected by the syste m, th e butto n (inactive) will turn t o (active). 2. To tes t the Play back fun ction (th is is not require d) , set up a “ Manual Trig ger” Rec ording Event by clicking Settings > Even t > Event Settings. 3. Cli ck the “A dd” b u ...

  • EverFocus EZN3260 - page 29

    EZ N Series 23 6.3 Playi ng B ack U sing A RV Vi ew er You ca n play back t he re cordings store d in the co mputer using the ARV Viewer incl uded in the softwa re CD. To stor e th e recor dings i n the compute r, pl ea se refer to Record ing List > Co py in 6. 1 Playback Window . 4 5 6 7 8 9 10 3 2 1 No. Item Name Desc ri pti ons 1 Snapshot Cli ...

  • EverFocus EZN3260 - page 30

    EZ N Series 24 7. S ettings Clic k the Se ttings butto n on the Live V iew W indow to ente r the setting s subm enu. There ar e ni ne bu t tons on the lef t - side of the submenu: Live, System Info , User Config, Network, Video, Audio, User, Event and Syste m. Clic k the L ive bu tton ca n go back to the L ive View Windo w. 7.1 System I nfo The Sys ...

  • EverFocus EZN3260 - page 31

    EZ N Series 25 7.1.2 Log Clic k the Log tab, the foll owing dialog box ap pears . The s equence number , dat e, time and ev ent messages of the l og event will be d isplayed in the Sys tem Log field. The log w ill display the last 256 l og events. Click the Ex port butto n to ex port t he sys tem log even t list i nto a “ .txt” file and sele ct ...

  • EverFocus EZN3260 - page 32

    EZ N Series 26 7.2 User Co nfig Each user can set a different configura tion for his/her Live page here. Thes e settings will be applied to the logged - in user’s Live page eve ry time he/sh e logs in . 7.2.1 Live Vi ew Confi g 【 Video/Au dio Conne ction Protoco l Sett ing 】 You can transmit t he data stream from the IP cameras using the RTSP ...

  • EverFocus EZN3260 - page 33

    EZ N Series 27 Click Apply to apply the change s or Canc el to cancel th e cha nges a nd ret urn to the pr evious s ettings. 【 Date/ Time Format Used in Text 】 Click t he dropd own me nu to s elect date/time for mat fro m t he listed optio ns. Cl ick on the desi red ho ur for mat. Click Apply to apply the c hanges or Cancel t o cancel the c han ...

  • EverFocus EZN3260 - page 34

    EZ N Series 28 7.2.3 Langu a ge Selec t the la nguage to b e displ ayed o n the We b inter face of th e IP c amera . The de fault l anguag e is English. To add a new languag e not listed in the cu rrent Language list, click the Bro wse butto n to lo cate the new la nguage file (. evb) on your compu ter and the n click the Upload but ton. Upda ted l ...

  • EverFocus EZN3260 - page 35

    EZ N Series 29 7.3 Network This page cov ers ne twor k - rel ated s etti ngs, inc luding Netw ork, D DNS, SM TP/FTP , HTTPS , SN MP, an d Network Alarm. 7.3.1 Network The fol lowing inform atio n is requ ired to con figure the netw ork s etting s. C ontac t your n etwork administrator or your in ternet service provi der to get the i nfo. 【 IP Set ...

  • EverFocus EZN3260 - page 36

    EZ N Series 30 Note: If PPPoE is s elected as the I P type, the sup plied IP Utility program will not be able t o detec t the device . IP address : When DHCP i s not us ed, the us er nee ds to ma nually enter the IP ad dress o f the c amera . Do not e nter an IP address that is already us ed for your com puter or other netw ork cameras. Subnet Ma s ...

  • EverFocus EZN3260 - page 37

    EZ N Series 31 7.3.2 DDNS DDNS (Dynamic Domain Name System) is a servic e used to ma p a domain name to the dynamic IP address of a network de vice. You can s et up the DDNS ser vice for remote ac cess to the IP camera. DDNS as signs a doma in na me (UR L) to the IP ca mera, so tha t the us er does not need to go throug h the trouble of c hecking i ...

  • EverFocus EZN3260 - page 38

    EZ N Series 32 Username / Password: Ty pe the l ogin ac count o f yo ur DDNS server prov ider. Click Apply to apply the change s or Canc el to cancel th e cha nges a nd ret urn to the pr evious s ettings . Note: 1. In or der to s uppor t the full f unctiona lity o f the came ra, you must o pen the por t number s (8 0, 554, 443) on the ro uter for r ...

  • EverFocus EZN3260 - page 39

    EZ N Series 33 7.3.3 SM TP / F TP 【 Set SMT P Server (emai l) 】 This area is for co nfiguring the mail server that is used to sen d e - mail text no tificati ons and one image file from the camera to predefined addresses v ia SMTP . Note tha t to enabl e e - ma il no tifica tion functio n, you have t o chec k the Send Mai l Notifica tion item o ...

  • EverFocus EZN3260 - page 40

    EZ N Series 34 Sender A ddress : Input the send er’s e - mail address, so that the receiver can recog nize the sender when an Eve nt message is received. Att ach Image : Check this box if you wan t to attach an image when an alarm is triggered or an I P camera detects even ts. Thi s server requ ires a secure c onnection (SSL ): Check this box to ...

  • EverFocus EZN3260 - page 41

    EZ N Series 35 7.3.4 HTTPS Hypert ext Trans fer Protoc ol Secure ( HTTPS) is a comb inatio n o f the H yper text Tra nsfer Protoc ol a nd the SSL/TLS protocol th at provides encry pted c ommunic ation and se cure identi ficatio n of a netw ork web server. Before using the HT TPS f unctio n for communi catio n with the IP c amer a, a C ertifica te m ...

  • EverFocus EZN3260 - page 42

    EZ N Series 36 2. Type the re quired C ertifi cate in forma tion a nd the n clic k the Apply butto n. The s ubjec t line w ill be dis playe d in the I nstalled Ce rtific ate In forma tion fi eld. 3. Click th e Property button, a pop - up window appears to display the detail s of the certificate. 4. To optionally create and install other certi ficat ...

  • EverFocus EZN3260 - page 43

    EZ N Series 37 2. Type the re quired C ertifi cate in forma tion a nd the n clic k the A pply butt on. The subjec t li ne will be display ed in the Cre ated Request fiel d 3. Click th e Property button, a pop - up window appears to display the detail s of the certificate. 4. To optionally create and install other certi ficates or request, remove th ...

  • EverFocus EZN3260 - page 44

    EZ N Series 38 7.3.5 SNMP The default values f or SNMP v1/v2/v2c and SNMP v3 are alrea dy filled in. Clic k either o f the Enable butto ns to e nable ei ther of the two. Make yo ur c hanges as des ired. C lick on the Trap A ddress field to enter t he dig its, i f re quired. Click Apply to apply t he change s or Canc el to cancel t he ch anges and r ...

  • EverFocus EZN3260 - page 45

    EZ N Series 39 7.4 Video The settings relati ng to video such as s treaming, camera OSD c an be configured on t his page. The "Video" p age has six tabs : Multi - streaming, Camer a, Advanced, ROI , Privac y Mask and Sc hedule . 7.4.1 Multi Str eamin g 【 Str eam Settings 】 This IP camera can output three vid eo streams simult aneously ...

  • EverFocus EZN3260 - page 46

    EZ N Series 40 【 Video Rec ordin g Set tings 】 Select the str eam y ou wan t to co nfig ure an d then s elec t whether yo u want the recording files of that stream to be saved in AVI or ARV format. 【 Time St amp Setti ngs 】 Yo u can s elect the Da te/Tim e forma t, pos ition , and ad d the setting to t he streaming. Click Apply to apply the ...

  • EverFocus EZN3260 - page 47

    EZ N Series 41 7.4.2 Camer a You ca n config ure the ba sic camera settings on this p age. EZN3160 / 32 60 : 【 Prof ile Settin gs 】 Th e Profile Setting is d esigned with four camera mo des ( Vivid /High Contrast , Standard, More Detail a nd User Define ) , wh ic h can b e applie d in v a rious scenes to enhance d image quali ty. You c an ap pl ...

  • EverFocus EZN3260 - page 48

    EZ N Series 42 Nig ht Mode: Selec t a camera mode and then click the Ap ply butto n to sa ve th e setti ngs.  High C ontras t : Select Hig h Contrast mode to have images w ith high er contrast ratio . You can further con figure t he ca mera se ttings on the Adv anced se tup page if requi red . Note th at s electing the Vivid mode will lock (gray ...

  • EverFocus EZN3260 - page 49

    EZ N Series 43 D/N Mode  Auto : Se lect to let the ca mera a utoma tically switc h to Ni ght m ode (bl ack and whi te images with IR LE D on ) when the lig ht levels fall to a speci fied level, and back to Day mo de (color) when the light levels rise t o a specified level.  Day : Select to keep the c amera in Day mode (colo r images with IR L ...

  • EverFocus EZN3260 - page 50

    EZ N Series 44 EZN3 340: 【 Prof ile Settin gs 】 Th e Profile Setting is d esigned with four camera modes (Vivid/High Co ntrast, Standard, More Detail a nd User Define), w hich can be applie d in various sc enes to enhanced image quali ty. You can ap ply di ffere nt cam era mode s to the day time a nd nig ht ti me. Day Mode: Select a camera mode ...

  • EverFocus EZN3260 - page 51

    EZ N Series 45 Nig ht Mode: Selec t a camera mode and then click the Ap ply butto n to sa ve th e setti ngs.  High C ontras t : Select Hig h Contrast mode to have images with higher co nt rast ratio . You ca n further con figure t he ca mera se ttings on the Adv anced se tup pa ge if r equ ired. N ote tha t s electi ng the Vivid mode will lock ( ...

  • EverFocus EZN3260 - page 52

    EZ N Series 46  Schedule : Selec t to l et th e camer a to s witch to Da y mode or Nigh t mode (IR LED on) based on the day an d night sche dule s etting s. To c onfigure the daytime / nighttime of eac h day, please refer to 7.4.6 Sch edule .  Auto mode without IR LED: Sel ect to let the c amera automatically sw itch to Night mode ( black and ...

  • EverFocus EZN3260 - page 53

    EZ N Series 47 7.4.3 Advanc ed You ca n furthe r set up ca mera s etting s on t his pag e. EZN3160: 【 C ontrol 】 The camera features 10 x digital zoom. Click the or bu tton to z oom i n or zoom ou t the image. Day: Select Day to set u p the fo llow ing set tings f or day time and then cl ick th e Apply button to save the se ttings. Night: Selec ...

  • EverFocus EZN3260 - page 54

    EZ N Series 48 【 Camer a Settin gs 】 Exposure S ettings ( AE): T his se tting is used to ada pt to t he amou nt or type of ligh t used by the camera. The o ptions vary among m odels. Mode:  ALC (S hutter Priori ty) : Selecting ALC ( Aut omatic L ight C ontrol ) allows the camera circ uitry to either take bright spots more into consideration ...

  • EverFocus EZN3260 - page 55

    EZ N Series 49 Noise Red uctio n Settings: This limits the amount of digital “video noise” t hat is usually found i n any video stream , and helps to reduc e fil e size . The higher the le vel, the m ore the reducti on. Select ON / OFF to enabl e / dis able the Nois e Red uction functi on. Or selec t Auto to let the camera automa tically enabl ...

  • EverFocus EZN3260 - page 56

    EZ N Series 50  Night mode witho ut IR LED: Selec t to ke ep the ca mera in Night mode (bl ack and whi te images with I R LED o ff ), even i n daytime.  Schedule wit hout IR LED: Selec t to le t the c amera to sw itch to Day mo de o r Night m ode ( IR LED off) base d on t he da y and nig ht sch edule s etti ngs. To c onfig ure the da ytime / ...

  • EverFocus EZN3260 - page 57

    EZ N Series 51 EZN3260: 【 C on trol 】 The camera features 10 x digital zoo m. Click th e or butto n to z oom in or zoom ou t the image. Day: Select Day to set up the following settings for daytim e and t hen cli ck the Apply butto n to save the se ttings. Night: Select Ni ght to set up th e fol lo wing se tting s for night t ime and th en click ...

  • EverFocus EZN3260 - page 58

    EZ N Series 52 【 Camer a Settin gs 】 Exposure S ettings ( AE): T his se tting is used to ada pt to t he amou nt or type of ligh t used by the camera. Shutter: I f enabl ed, this se tting le ts you set t he shut ter spe ed yo ursel f (mea sured in frac tions o f a secon d). AGC : Set the A uto Gain Control limit here. The lower the AGC level, th ...

  • EverFocus EZN3260 - page 59

    EZ N Series 53  ON ( HLC ) : This functi on is useful wh en the brigh t highlig hts, s uch as flashli ght or car headl ights , appear on the came ra vi ew. The higher the val ue, the mo re the highlig ht c ompens ation. HLC Level : Select a level for the HLC setting. The higher the lev el, the m ore th e hig hlight compens ation . HLC Mod e: Sel ...

  • EverFocus EZN3260 - page 60

    EZ N Series 54 White Ba lance Setting s: S elect the mode that deliv ers the best quality ima ge for the cam era’s light environment. There are five options: Auto, Manual , Ind oor, O utdoor, One Push.  Auto: Sel ect to l et t he ca mera a utomatic ally a djust t he Whi te Bal ance. I n t he Auto mode the camera compu te s the whi te bala nce ...

  • EverFocus EZN3260 - page 61

    EZ N Series 55 Sharpness Settings : Sel ect t he sharpness level of the image. A low shar pness level will deliver a softer, less detailed image. A high lev el will deliver a sha rp, highly detailed image. Switch Resolution Enhanc ement O N to e nable the re soluti on en hancem ent func tion. Contrast: Select t he con trast level of the image. Moni ...

  • EverFocus EZN3260 - page 62

    EZ N Series 56 EZN3340: 【 C ontrol 】 The camera features 10 x digital zoom. Click the or bu tton to z oom i n or zoom ou t the image. Day: Select Day to set u p the fo llow ing set tings f or day time and then cl ick th e Apply button to save the se ttings. Nigh t: Select Ni ght to se t up the fol lowing setti ngs for night tim e an d then cli ...

  • EverFocus EZN3260 - page 63

    EZ N Series 57 【 Camer a Settin gs 】 Exposure S ettings ( AE): T his se tting is used to ada pt to t he amou nt or type of ligh t used by the camera. Mode:  ALC (Sh utter Priority) : Selecting ALC ( Automatic Light Control ) allows the camera circuitry to either take bright spots more into consideration (peak), bringing out detail in bright ...

  • EverFocus EZN3260 - page 64

    EZ N Series 58 BLC Settings: Back L ight Compensation (BLC ) is used to make the s ubject appear clearer when it is set aga inst a brig ht back groun d. The options va ry among models.  OFF: Select to s witch B ack Light C ompensa tion functi ons of f.  Back Li ght: The Back Light funct ion is usef ul when the bac kgrou nd of t he su bject is ...

  • EverFocus EZN3260 - page 65

    EZ N Series 59  Schedule : S elect to let the came r a to s witch to Da y mode or Nigh t mode (IR LED on) based on the day and ni ght sc hedu le set tings. To co nfigure the day time / night time of eac h day , pleas e refer to 7.4.6 Schedul e .  Auto mode without IR LED: Sel ect to let the camera automatically switch to Ni ght mode ( black a ...

  • EverFocus EZN3260 - page 66

    EZ N Series 60 7.4.4 ROI (Region of Interest) The Reg ion of Inte rest ( ROI) function allow s users to set up mul tiple regions within a n image with better quali ty and less distor tion tha n th e rest o f the image. You c an also use t his fu nctio n toget her with t he Digi tal Zo om fu nction o n the Live Vi ew P age to g et a better imag e re ...

  • EverFocus EZN3260 - page 67

    EZ N Series 61 7.4.5 Priv ac y Mas k The Privacy Mask can block out sensitive areas from view, covering the areas w ith colored or black and white boxes i n bot h live view and rec or ded cli ps. Thi s feature is useful when user s’ don’ t want the sensitive information vis ible. Up to four Privacy Masks c an be configured. 【 Privac y Mask Co ...

  • EverFocus EZN3260 - page 68

    EZ N Series 62 7.4.6 Schedule The Sc hedule s etup page is desig ned for us ers to confi gure the d ayti me and ni ght time o f each day. Th e Schedul e se tting is only functio nal i f you se lect S chedule or Schedule wi thout IR LED fr om t he D/ N Mode dr op - down list on the Camera setup page . Select N ight and then move t he cursor on the d ...

  • EverFocus EZN3260 - page 69

    EZ N Series 63 7.5 Audio The E Z N series IP camera c an transmit audio to yo ur comput er if you hav e connec ted an exte rnal microphone to its au dio Input cable. It c an also receive audio i nput from you and transmit it via an externa l speak er, if you have connec ted s uch a s peake r to i ts audio Outp ut cabl e. Check the Enable Au dio bo ...

  • EverFocus EZN3260 - page 70

    EZ N Series 64 7.6 User 7.6.1 User Information The sys tem a dminis trato r can cr eate up to t en us er acc ounts o n this page. To se t up a us er ac count: 1. Highlight a user ac count and click t he Modify button. The follow ing dia log box appe ars. 2. Type the accoun t name, accou nt descri ption a nd pa sswor d for th e acc ount. Type t he p ...

  • EverFocus EZN3260 - page 71

    EZ N Series 65 • User: A user ca n view the Live View page and view the system, network, v ideo, and audio inform ation. A user can only adj ust t he User Config page s etti ngs. Th e user does n ot have acce ss to the User , Event and Sy stem pa ges. • Guest: The lowes t level of access, which only allows the user access to t he Live View page ...

  • EverFocus EZN3260 - page 72

    EZ N Series 66 7.6.2 IP Address Filter Use this page to s pecify IP ad dresses tha t are not allowed to access this camera. By de fault, any IP address can access the camera. Note: The Allowed L ist addresses only become re levant when the Denied List contains a network or range, and the s upervisor wants to allow o ne or more IP ad dresses within ...

  • EverFocus EZN3260 - page 73

    EZ N Series 67 7.7 Event You ca n set up the M otio n Detec tion e vent, Tampe r Detecti on ev ent o r the A larm I /O to a utoma tical ly notify the users wh en an event occurs or a n alarm is tr iggered. You can al so set up a sched ule to automatically record the videos when an eve nt occurs or an al arm is triggered. 7.7.1 Event Settings You ca ...

  • EverFocus EZN3260 - page 74

    EZ N Series 68 Enter Event Name: Type an event nam e. Event Tr iggered b y: Select an even t or alarm type for the to - be - speci fied - below reaction/s. Alarm Inpu t: Sele ct this if you wan t a reaction t rigger coming from a ny external, connec ted sensor to activate a to - be - specified - below reac tion/s via the camera sy stem. Make sure t ...

  • EverFocus EZN3260 - page 75

    EZ N Series 69  Send Mail Notif ication: Click if you want the camera to se nd an email text notification and on e im age file to the email address e ntered in the Set SMTP Server(email) field of the Network > SMT P/FTP pag e, if th e Eve nt occur s (s ee 7.3.3 SMTP / FTP ).  Upload to FTP: Click if you want the cam era to upload the recor ...

  • EverFocus EZN3260 - page 76

    EZ N Series 70 7.7.2 Motion Detection Use this page to c onfigur e up t o four areas in whi ch moti on w ill be de tect ed. Whe n a mo tion is detec ted by the ca mera, the mo tion de tecti on ico n w ill appea r at the to p right of th e Live pa ge to alert the use r. This func tion ca n also be li nked wit h corr ectly config ured E vents to trig ...

  • EverFocus EZN3260 - page 77

    EZ N Series 71 7.7.3 Tamp er D etect ion Use this page t o set the number of seconds that an alarm signal will be active if the device is physically tampe red (mo ved, c over ed up, or out o f foc us. 7.7.4 Alarm I/O Use this page to s et the type o f trig ger i nput an d the type of output conta ct for ea ch o f the c amera’ s two configurable a ...

  • EverFocus EZN3260 - page 78

    EZ N Series 72 7.7.5 Schedule Use this page to c onfigur e a sc hedule for pe riods during which the ca mera s hould de activa te al l user - activa ted Eve nts (gr ay Des elec t perio ds), o r when the camera s hould deactivate all user - activated Events, exc ept Sche dule Reco rding (SR ) eve nts (b lue Sc hedule Recor ding - o nly per iods), or ...

  • EverFocus EZN3260 - page 79

    EZ N Series 73 7.8 System You ca n set up the s yste m’s time and S D card setting s, and to d o mainte nanc e and reset actions li ke reboo ts and upgrades . 7.8.1 Date/ Ti me 【 Machi ne Name Settings 】 If re quired, enter a new name f or the machi ne. T his nam e will be visi ble in the Machi ne Name fiel d of the IP Ut ility so ftwa re , w ...

  • EverFocus EZN3260 - page 80

    EZ N Series 74 7.8.2 Dayl ight Savin g Click Enable Daylig ht Sav ing to ena ble th is sche dule, and s elect the da tes w hen the regio n’s da ylight savi ng period begi ns and ends. Click Apply to appl y the c hanges or Cancel to cance l the change s and retur n to the previ ous se ttings. 7.8.3 SD C ard Use this pag e to pr epar e the s ystem ...

  • EverFocus EZN3260 - page 81

    EZ N Series 75 7.8.4 Maint en anc e 【 Main tenance Ser ver 】 Reboot : Clic k this butto n to r eboot t he uni t wit hout c hanging any of the se tting s. Use t his function if the u nit is no t be having as expec ted . Restor e : Click this b utton t o resta rt an d reset mos t of the c urre nt set tings to thei r facto ry def ault values . The ...

  • EverFocus EZN3260 - page 82

    EZ N Series 76 【 Sav e/Load Video Configur ation Ser ver 】 Save: To make a back up file o f the m achine ’s vi deo con figura tions, press Sa ve to save t he vi de o configur atio ns to a confi g. fil e. This will e nable the use r to r eload these c onfigu ratio n setti ngs i f the setti ngs are chang e d and t here is unexp ected b ehavio r ...

  • EverFocus EZN3260 - page 83

    EZ N Series 77 8. Upgrading Firmw are Us ing IP Utility You ca n upgra de the Firm ware us ing t he IP Uti lity soft ware in clude d in the so ftwar e CD. 1. Install a nd then star t the IP Utility . Th e following dialog box appears. 2. IPU will automatically search the cameras c onnected i n the LA N. The defa ult netw ork value s of the cameras ...

  • EverFocus EZN3260 - page 84

    EZ N Series 78 5. C heck the box to sele ct the camera an d then click Upgrade Firmware . A bro wsing wind ow appears. 6. Selec t the firmw are file (.evb) and th en cl ick Open . The IP Utility w ill automatically u pgrade the firmware. The camera will r eboot once the updat e is complete. Click Fi nd Devices , the new firmware version shoul d be ...

  • EverFocus EZN3260 - page 85

      EZN  Series  79   9. Specifications   Model  EZN3160  EZN3260  EZN3340  Camera  Image  Sensor  1/3"  Panasonic  CMOS  1/3"  Panasonic  CMOS  1/2.8”  Sony  CMOS  Megapixel  1.3  MP  2  MP  3  MP  Min.  Illumination  Color: ...

  • EverFocus EZN3260 - page 86

    EZ N Series 80 Audio Audio Streaming Two - way audio Audio Compression G.711 Network Interface 10 / 100 Base -T Etherne t, LAN / PoE C able Supporte d Protocols TCP/IP, IP V6, UDP, I CMP, DH CP, NTP, DNS, DDNS, SMTP, SNMP, FTP, HTTP, HTT Ps, PPPoE, UPnP, Bo njour, RTP, RT SP, RTC P, IGMP, ARP, ONVIF, P SIA Mechan ical Memory C ard On e micro SD / S ...

  • EverFocus EZN3260 - page 87

    EverFo cus Electronics Corp. EverFocus T aiwan: 12F, No.79, Sec. 1, Shin - Tai Wu Road, Hsi - Chih, Taipei, Taiwan TEL: +886 2 269 8 2334 FAX: +886 2 26 98 2380 www.ever focus.com. tw marketing@everfocus.com.tw EverFocus Eur ope - G erm a ny: Albert - Ei nstein - Strasse 1, D - 464 46 Emmerich, Germany TEL : +49 2822 93940 FAX: +49 2822 9394 95 www ...

Fabricant EverFocus Catégorie Security camera

Les documents que nous recevons du fabricant de l'appareilEverFocus EZN3260 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques EverFocus
- manuels d’utilisations EZN3260
- fiches produit EverFocus
- dépliants
- ou étiquettes-énergie EverFocus EZN3260
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation EverFocus EZN3260.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation EverFocus EZN3260, manuels d’entretien, brefs manuels ou manuels de l’utilisateur EverFocus EZN3260. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit EverFocus EZN3260.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil EverFocus EZN3260, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser EverFocus EZN3260 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs EverFocus EZN3260.

Le manuel d’utilisation complet EverFocus, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel EverFocus EZN3260 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières EverFocus EZN3260, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lEverFocus EZN3260 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil EverFocus EZN3260 - qui devraient nous aider dans les premières étapes lors de l'utilisation EverFocus EZN3260
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de EverFocus EZN3260
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service EverFocus EZN3260 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de EverFocus EZN3260?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec EverFocus EZN3260, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec EverFocus EZN3260 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)