Français dropdown-ico

Manuel d’utilisation TechniSat Integrated IRDETO

46 pages 1.74 mb
Télécharger

Aller à la page of 46

Summary
  • TechniSat Integrated IRDETO - page 1

    Integrated IRDETO decoding unit. Receives free-to-air as well as IRDETO encoded/scrambled satellite programmes. Instr uction Manual +++ DIGIT AL +++ DIGIT AL +++ DIGIT AL +++ DIGIT AL +++ DIGIT AL +++ +++ DIGIT AL +++ DIGIT AL +++ DIGIT AL +++ DIGIT AL +++ DIGIT AL +++ DigiBo x IRDET O bed_anl_DigiBox Irdeto_englisch.qxd 30.01.02 12:03 Seite 1 ...

  • TechniSat Integrated IRDETO - page 2

    On/Standby Numeric keypad Programme list on/off Back Menu on/off Sound on/off EXTERNAL Language selection Programme - Information (blue) Delete (red) Programme informa- tion (yellow) T ransponder informa- tionen (green) V olume + Programme + TV/Radio mode EPG MONO1/MONO2 OK V olume - Arrow right Arrow left Arrow up Arrow down Remote control FERNBED ...

  • TechniSat Integrated IRDETO - page 3

    Contents 1 Illustrations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 2 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2, 5 3 Impor tant - please read first . . . . . . . . . . . . . . . . .6 Disposal instructions . . . . . . . . . . . . . . . . . . . . . .6 Safety instr uctions . . . . . . . . . . . . . . . . . ...

  • TechniSat Integrated IRDETO - page 4

    6.13.7 EPG functions . . . . . . . . . . . . . . . . . . . . . . . . . . .23 6.13.7.1 EPG information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 6.13.7.2 Pre-selecting a programme . . . . . . . . . . . . . . . . . . . . . . . . .23 6.13.7.3 Activating the VCR (timer mode) . . . . . . . . . . . . . . . . . . . . .23 6.13.7 ...

  • TechniSat Integrated IRDETO - page 5

    IRDETO card reader: Insert appropriate smart card carefully into the slot (gold chip at bottom, and in direction of insertion) until it meets resi- stance On/standby mode LNB input SCART connection TV set SCART connection VCR Audio outputs RS-232 connection/interface HF output Mains power connection Input terrestri- al antenna Programme selection u ...

  • TechniSat Integrated IRDETO - page 6

    6 3 Please read this first > Before connecting the receiver , first check that you have received all necessary parts. The following are included: 1 receiver 1 mains cable 1 remote control unit 1 instruction manual 1 guarantee card 2 batteries (1.5V size AAA) > Insert the enclosed batteries in the battery compartment of the remote control unit ...

  • TechniSat Integrated IRDETO - page 7

    7 Safety Instructions For your own safety , you should read the safety instructions carefully before switching on your new receiver for the first time. The manufacturer can accept no responsibility for damage caused by inappropriate handling, or by ignoring the safety advice. > T o ensure a suf ficient ventilation, place the receiver on a plain, ...

  • TechniSat Integrated IRDETO - page 8

    8 Connecting a DVB receiver to a satellite installation a. Connection from LNB to LNB IN connection on DVB receiver b. Mains connection c. Connection from terrestrial antenna to antenna input (RF IN) on DVB receiver . d. SCART connection between a VCR and the VCR Scart connection on the DVB receiver . e. SCART connection between DVB receiver and th ...

  • TechniSat Integrated IRDETO - page 9

    4 Connections The references in bold type - a b c etc. refer to the diagram on page 8. 4.1 Mains connection The receiver should only be connected to the mains supply after all connections with other components and equipment have been made. This helps to eliminate the likelihood of dama- ge to the receiver or other components. b Once all other cable ...

  • TechniSat Integrated IRDETO - page 10

    10 4.4 Setting the UHF Output Channel The procedure is as follows: > Use the Menu key to select the Main Menu > Now select the entry Settings, marking it in blue by using the up/down ar row keys > Confirm by pressing OK The sub-menu Settings will be displayed. > Now use the up/down ar row keys to mark the line A udio/Video Settings > ...

  • TechniSat Integrated IRDETO - page 11

    > Once you have found a UHF channel with optimal quality , please remember to enter it into the memory of your TV set. Y ou can now select further settings in the Audio/Video Settings menu, or you can press the Menu key to return to normal operation. The selected setting will be auto- matically stored in memory when you exit the menu. > If yo ...

  • TechniSat Integrated IRDETO - page 12

    12 5 Installation Now that you have made all the necessary connections to and from your receiver , and have switched it on, you may , if necessary resp. if you wish, optimise the operation of the receiver . 5.1 OSD Language This menu heading gives you the opportunity of selecting a language of your choice, in which the menus will be displayed. The ...

  • TechniSat Integrated IRDETO - page 13

    > Use the up/down ar row keys to mark the entry Basic Settings . > Press OK to confirm this selection > The sub-menu Basic will be displayed. > Y ou can use the up/down arrow keys to move the marker within the menu, and to change the individual positions as stated. When selecting a menu item, please also note any additional screen notic ...

  • TechniSat Integrated IRDETO - page 14

    > Now highlight the entry Audio/Video Settings , using the up/do wn ar row keys. > Confirm by pressing OK The sub-menu Settings A udio/Video will be displayed > Use the up/down ar row keys to move the marker (blue highlighted entry) within the menu, and to change the individual settings as indicated. When selecting an opti- on, please also ...

  • TechniSat Integrated IRDETO - page 15

    Subtitel Y our DVB receiver has the facility to display sub-titles. Provided the function Sub-titles has been enabled, and the preferred language selected in terms of the Audio signal selection is available, the sub-titles will be superimposed on the picture automatically . If the function has not been enabled, it can be set manually , Sub-titles a ...

  • TechniSat Integrated IRDETO - page 16

    The following selections can be made in this sub-menu: 5.4.1 Switching DiSEqC on or off DiSEqC ( D igital Satellite Eq uipment C ontrol) is a digital signal that can control the functions of DiSEqC-compatible components via the antenna connection. If your external installation features DiSEqC components, you should enable the DiSEqC control functio ...

  • TechniSat Integrated IRDETO - page 17

    > Confirm by pressing OK . The menu >LNB>Check will now be displayed, together with the DiSEqC setting selected (e.g. A/A 1 ). The following settings can be made: LOF low band LOF (local oscillator frequency) is the frequency used by the LNB to convert the frequency received into the so-called 1st Intermediate Frequency , which can then be ...

  • TechniSat Integrated IRDETO - page 18

    Y ellow bar: good reception Green bar: excellent reception 6 Operation At the first time the receiver the receiver gets connected to the main supply the display shows successively the symbols dL, Iu and rA . During this time the receiver checks if a new operation software is available at the serial interface. If a new software is available the rece ...

  • TechniSat Integrated IRDETO - page 19

    If the receiver is in TV mode, only TV programmes will be shown, and in Radio mode only radio programmes will be displayed. The programme currently selected is highlighted in red. > Y ou can now proceed to mark the desired programme in blue by using the up/down ar row keys. > Press the OK key , and the desired programme will be shown. > Us ...

  • TechniSat Integrated IRDETO - page 20

    ged, the receiver automatically reverts to the default language setting (see 5.3 Language Selection). Y our receiver also provides the facility to receive mono broadcasts. For mono transmissions, you can use the MONO1/MONO2 key to switch between the MONO1 and MONO2 sound channels. 6.6 TV/Radio selection Y our receiver has been pre-programmed with a ...

  • TechniSat Integrated IRDETO - page 21

    If you have not enabled the Sub-title function, or if sub-titles are only being provided in other languages, you can also enable their display manually as follows: > Press the red function k ey . A list of the sub-title languages currently being broadcast will be displayed. > Use the up/down ar row keys to select the language required. > C ...

  • TechniSat Integrated IRDETO - page 22

    6.13.4 Now (Display of current programme contents) The first tables to be displayed will be those of programmes currently being broadcast (Now). The yellow bar right from the programme name shows the past time of the current program- me. > Y ou may now utilise the EPG functions as per Point 6.13.3. > Press the right arr o w key to view the EP ...

  • TechniSat Integrated IRDETO - page 23

    The title line of this table shows an additional window in the heading line, displaying the time of the EPG table being shown. > Use the right arr o w key to scroll through the tables in chronological order . > Holding down the right arr o w key a little longer will allow you to scroll through one hour at a time. This will allow you to get to ...

  • TechniSat Integrated IRDETO - page 24

    Y our receiver will be switched on at the time when the selected programme is due to begin. If the receiver is switched on by the timer , the letter " t " will be shown on the display , together with the channel number . In this mode, most of the functions of the remote control are disab- led in order to prevent an accidental premature in ...

  • TechniSat Integrated IRDETO - page 25

    > Use the ar row keys to mark the required channel. > Press the OK key to display the EPG Summary of the selected channel. 6.13.7.5 EPG Search The EPG Search function allows you to search for specific types of programmes. The search criteria available are Date , Time Period and Pr ogramme Type . The search will only be carried out among those ...

  • TechniSat Integrated IRDETO - page 26

    > Use the up/down as well as left/right ar row keys to mark the programme type required. > Press the OK key to transfer the selected category to the column Prog ramme Type . > Now press the blue function key to start the EPG search. After a few seconds the screen will display a summary of the programmes with the desired content. If you sel ...

  • TechniSat Integrated IRDETO - page 27

    The timer can be programmed as follows: Date > Use the ar row keys to mark the Date column > Use the numeric k ey pad to enter the date on which you wish to record a pro- gramme Star t > Use the right arr o w key to mark the Start column. > Use the numeric k ey pad to enter the starting time for the timer . Stop > Repeat the steps sh ...

  • TechniSat Integrated IRDETO - page 28

    Status > Use the ar row keys to mark the Status column > Use the OK key to enter the desired status in this line. 1.V CR Y our equipment will be switched on and off for the selected programme. If the equipment was switched on by means of the timer , the display will show a "t" together with the appropriate channel number . Most of t ...

  • TechniSat Integrated IRDETO - page 29

    The User List includes those channels you can select by means of the numeric key pad, and by using the channel up/down keys. The T otal List includes all channels. If you do a search in this list, new programmes will be shown in red, and can be transferred from the T otal List to the User List. 7.1 Adding/Deleting Channels T o add new channels to t ...

  • TechniSat Integrated IRDETO - page 30

    appear in the User List are marked with a red cross. Scrambled channels are marked with a key symbol. Bouquets are displayed with a blue background. 7.1.1 Adding items to the User Channel List > Use the up/down ar row keys to mark a channel or bouquet that you wish to work on. > Press the OK key , and this field will display a red cross (incl ...

  • TechniSat Integrated IRDETO - page 31

    7.3 Locking Channels Y ou have the facility to lock specific channels (parental lock). A locked programme will only be shown on the TV screen if you enter your personal PIN after selecting the channel. This number need be entered only once during an operating session, i.e. the locking will only become operative again the next time the receiver is s ...

  • TechniSat Integrated IRDETO - page 32

    P P l l e e a a s s e e N N o o t t e e : : The more channels and programmes are added to the Electronic Programme Guide, the lon- ger will it take to acquire/update data. Also, the maximum preview period of 7 days may not be possible if the number of program- mes stored in the Electronic Programme Guide is increased. Proceed as follows in order to ...

  • TechniSat Integrated IRDETO - page 33

    > Y ou may now proceed to use the ar row keys in order to select/mark individual chan- nels. Press the OK key to add a channel to the Electronic Programme Guide (cross appears in display) or to delete a channel from the guide (cross disappears from dis- play). > Use the up/down ar row keys to move around the list one line at a time. > Use ...

  • TechniSat Integrated IRDETO - page 34

    > In order to search for programmes, press the Menu key to display the Main Menu . > Use the up/down ar row keys to mark the entry Search . > Confirm with the OK key . The sub-menu >Search will be displayed. > Use the ar row keys to select the search mode to be used. > Press the OK key to display the relevant sub-menu. 7.7.1 All W ...

  • TechniSat Integrated IRDETO - page 35

    > Confirm with the OK key . > Use the up/down ar row keys to mark the entry Start search . > Press OK again to start the search. > The search can be terminated at any time by pressing OK. It is quite likely that a full scan may take 15 minutes or longer . Please note any notes and information displayed on the screen. 7.7.3 T ransponder ...

  • TechniSat Integrated IRDETO - page 36

    directly from the service provider/broadcaster , or from the Internet. Select the menu >Search>Prog ram . > Use the up/down ar row keys to mark the entry Program . > Confirm with the OK key . The menu >Search>Prog ram will be displayed. This menu differs from the T ransponder menu only in terms of the list item Ser vice ID . > ...

  • TechniSat Integrated IRDETO - page 37

    > Use the up/down ar row keys to mark the entry F actor y Settings . > Confirm with the OK key . The sub-menu >Factor y Settings will be displayed. 7.8.1 R estore F actor y Settings This function will delete all personal settings, and will restore all default settings as program- med in the factory . 7.8.2 Delete All Prog rams This functio ...

  • TechniSat Integrated IRDETO - page 38

    38 7.9 System Configuration This menu entry allows you to view all specific data relating to the receiver . > Use the up/down ar row keys to mark this entry in the sub-menu Settings . > Confirm with the OK key . > Use the Back or Menu keys to exit this function. 7.10 embedded Irdeto Use this menu entry to access the sub-menus related to th ...

  • TechniSat Integrated IRDETO - page 39

    39 8 T echnical T erms Antenna cable: Cable connection between the modulator of the satellite receiver and the antenna input of the TV set, used as an alternative where no SCART connection is provided. A V : see SCART Coaxial cable: Cable connection between the LNB and the satellite receiver , transmits the signals received and transmits power supp ...

  • TechniSat Integrated IRDETO - page 40

    LNB/LNC (Low Noise Block converter) Receiving unit at the focal point of the parabolic dish antenna, converts the signal from the frequency range of the satellite to the intermediate frequency of the receiver . LOF: Local oscillator frequency , measured in MHz or GHz, varies according to the LNB and the frequency range received. Receiving frequency ...

  • TechniSat Integrated IRDETO - page 41

    41 T ransponder: Piece of equipment in the satellite that processes one or more programmes, including recei- ving the data from the ground station, amplification, retransmission of data back to earth. Universal LNB: Name given to a three-band LNB. It is able to receive the following ranges: FFS (10.70-1 1.70 GHz), BBS (1 1.70-12.50 GHz) and FFS Hig ...

  • TechniSat Integrated IRDETO - page 42

    9 T echnical Data DBS-T uner: Input frequency range 950….2150 MHz Input level range -65 dBm… -25dBm Noise max 12 dB DBS tuner input F-connector Input impedance 75 Ohm AFC capture range +/- 3 MHz Demodulation Shaped QPSK Symbol rate 2….45 Mbaud/s, SCPC/MCPC compatible FEC concatenated Viterbi and Reed-Solomon Viterbi rates 1/2, 2/3, 3/4, 5/6, ...

  • TechniSat Integrated IRDETO - page 43

    T eletext filtering in accordance with standard ETS 300 472 Entry teletext data compliant to ITU-R BT .653-2; lines: 6-22 and 320-335 TV-SCART : Output CVBS with RGB, or only CVBS, or only S-VHS (switchable) VCR-SCART :: Input CVBS with RGB or S-VHS Output CVBS or S-VHS Serial Interface RS 232: T ype RS 232 bi-directional Bitrate Max. 1 15.2 Kbit/s ...

  • TechniSat Integrated IRDETO - page 44

    Power supply: Mains switch: Power usage: <24 W (in operation, horizontal polarisation, 400 mA supply to LNB) <15 W (in operation, excluding LNB) < 5 W (in standby mode) Mains voltage: 230 V /50 Hz AC General: Ambient temperature + 15° C ….+ 35° C Humidity < 80 % Dimensions (WxDxH) 305 mm x 135 mm x 65 mm Weight 0.8 kg 10 T roublesho ...

  • TechniSat Integrated IRDETO - page 45

    45 Problem No reception of channels pre- viously received Remote control not working T ime not displayed in Standby mode T emporary interruptions on Pro 7, Sat.1, TM3, Cable 1, DSF and HOT Possible Cause Dish faulty , or position changed Channel moved to another trans- ponder Channel no longer broadcast Batteries spent T ime not entered Interferenc ...

  • TechniSat Integrated IRDETO - page 46

    Summary for everyday use Switching on and off > Switch the receiver on by pressing the On/Standby key on the front panel of the receiver , or on the remote control unit. > Press the key again, either on the front panel of the receiver or on the remote control, to switch the receiver off. > The receiver is now in standby mode. Selecting a p ...

Fabricant TechniSat Catégorie DVD Player

Les documents que nous recevons du fabricant de l'appareilTechniSat Integrated IRDETO peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques TechniSat
- manuels d’utilisations Integrated IRDETO
- fiches produit TechniSat
- dépliants
- ou étiquettes-énergie TechniSat Integrated IRDETO
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation TechniSat Integrated IRDETO.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation TechniSat Integrated IRDETO, manuels d’entretien, brefs manuels ou manuels de l’utilisateur TechniSat Integrated IRDETO. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit TechniSat Integrated IRDETO.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil TechniSat Integrated IRDETO, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser TechniSat Integrated IRDETO par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs TechniSat Integrated IRDETO.

Le manuel d’utilisation complet TechniSat, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel TechniSat Integrated IRDETO - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières TechniSat Integrated IRDETO, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lTechniSat Integrated IRDETO qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil TechniSat Integrated IRDETO - qui devraient nous aider dans les premières étapes lors de l'utilisation TechniSat Integrated IRDETO
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de TechniSat Integrated IRDETO
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service TechniSat Integrated IRDETO dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de TechniSat Integrated IRDETO?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec TechniSat Integrated IRDETO, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec TechniSat Integrated IRDETO il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)