Français dropdown-ico

Manuel d’utilisation Planar 43P

43 pages 1.84 mb
Télécharger

Aller à la page of 43

Summary
  • Planar 43P - page 1

    PDP-50P AND PDP-43P OPERATING INSTRUCTIONS ...

  • Planar 43P - page 2

    This unit has been designed for use as a computer display monitor . The optional video card is required if you wish to view other video signals on the monitor . For details consult your local retail dealer . Contents related to system specifications, power requirements, accessories, and other information differ with respect to the country where thi ...

  • Planar 43P - page 3

    i En Safety Precautions Français English Operating Instructions Thank you very much for purchasing this P lanar product. Before using your Plasma Display , please read the “Safety Precautions” and these “Operating Instructions” carefully so you will know how to operate the Plasma Display properly . Keep this manual in a safe place. Y ou wi ...

  • Planar 43P - page 4

    ii En English Safety Precautions Safety Precautions IMPOR T ANT NOTICE The serial number for this equipment is located on the rear panel. Please write this serial number on your enclosed warranty card and keep it in a secure area. This is for your security . The following symbols are found on labels attached to the product. They aler t the operator ...

  • Planar 43P - page 5

    iii En Safety Precautions Fran ç ais English Safety Precautions GROUNDING OR POLARIZA TION ÷ If this product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other), it will fit into the outlet only one way . This is a safety feature. If you are unable to insert the plug fully into the outlet, try ...

  • Planar 43P - page 6

    1 En Before Proceeding English Contents Safety Precautions ........................................................ i Features ........................................................................ 2 Before Proceeding ........................................................ 3 How to Use This Manual ................................................ ...

  • Planar 43P - page 7

    2 En Before Proceeding English ¶ Introduces newly developed 50" XGA Wide Plasma Panel The new wide high-precision XGA 50" plasma panel (1280x768 / 16:9) pushes the envelope of previous high-luminance panels, producing brighter , clearer images with higher contrast. ¶ Newly developed full screen filter produces clear , high-contrast imag ...

  • Planar 43P - page 8

    3 En Before Proceeding English Before Proceeding How to Use This Manual This manual is set up to follow the course of actions and operations in the order that would seem most logical for someone setting up this unit. Once the unit has been taken out of the box and it has been confirmed that all the parts have been received, it may be beneficial to ...

  • Planar 43P - page 9

    4 En Before Proceeding English 4 Press SET to display the adjustment screen for the selected item. ADJUST SET EXIT SET MENU PO H. S I T I O N : 0 PO V. S I T I O N : 0 5 Press 5 / ∞ / 2 / 3 to adjust the value. About operations in this manual Operations in this manual are outlined in step by step numbered procedures. Most of the procedures are wr ...

  • Planar 43P - page 10

    5 En Before Proceeding English Checking Supplied Accessories Check that the following accessories were supplied. 1 Power cord 2 Remote control unit 3 AA (R6) batteries (x 2) 4 Cleaning cloth (for wiping front panel) 5 Speed clamps (x 2) 6 Bead bands (x 2) Before Proceeding 7 Display stands (x 2) 8 Washers (x 2) 9 Hex hole bolts (x 2) 0 Remote contr ...

  • Planar 43P - page 11

    6 En Part Names and Functions English Part Names and Functions Main Unit Main unit 1 Display stand 2 Remote control sensor Point the remote control toward the remote sensor to operate the unit (page 8). 3 ST ANDBY/ON indicator This indicator is red during standby mode, and turns to green when the unit is in the operation mode (page 19). Flashes gre ...

  • Planar 43P - page 12

    7 En Part Names and Functions English 8 9 7 0 - 2 3 4 5 6 1 Remote Control Unit 1 SCREEN SIZE button Press to select the screen size (page 21). 2 INPUT buttons Use to select the input (page 19). 3 MENU button Press to open and close the on-screen menu (pages 17 to 30). 4 ADJUST ( 5 / ∞ / 3 / 2 ) buttons Use to navigate menu screens and to adjust ...

  • Planar 43P - page 13

    8 En Part Names and Functions English Part Names and Functions Connection Panel The connection panel is provided with two video input jacks and one video output jack. Audio input and speaker output jacks are also provided, together with a CONTROL IN/OUT connector for connecting to Planar components bearing the Î mark. For instructions regarding co ...

  • Planar 43P - page 14

    9 En Part Names and Functions English Part Names and Functions 8 Synchronizing signal impedance selector switch Depending on the connections made at INPUT2, it may be necessary to set this switch to match the output impedance of the connected component ’ s synchronization signal. When the output impedance of the component ’ s synchronization si ...

  • Planar 43P - page 15

    10 En English Installation and Connections Installation and Connections Installation of the Unit Installation using the supplied display stand Be sure to fix the supplied stand to the installation surface. Use commercially available M8 bolts that are 25 mm longer than the thickness of the installation surface. 1 Fix the supplied stand to the instal ...

  • Planar 43P - page 16

    11 En Installation and Connections Français English ...

  • Planar 43P - page 17

    12 En English Installation and Connections Installation and Connections Connection to INPUT1 and INPUT2 The INPUT 1 and INPUT 2 jacks are used to connect the display to a computer . After making the connections, adjust the screen settings in accordance with the computer’ s signal output. See pages 17-18 for information regarding settings. Note Co ...

  • Planar 43P - page 18

    13 En Installation and Connections Fran ç ais English Installation and Connections When connecting to INPUT1 ANALOG RGB (ANALOG RGB) INPUT1 OUTPUT Connect the cable corresponding to the shape of the input terminal on this unit and the personal computer ’ s output terminal. Secure by tightening the terminal screws on both units. After connecting, ...

  • Planar 43P - page 19

    14 En English Installation and Connections Installation and Connections Connection of composite SYNC analog RGB source Make composite SYNC connections for a personal computer with output that has the vertical synchronization signal layered on top of the horizontal synchronization signal. When connecting to INPUT1 ANALOG RGB (ANALOG RGB) INPUT1 OUTP ...

  • Planar 43P - page 20

    15 En Installation and Connections Fran ç ais English Power Cord Connection Connect the power cord after all component connections have been completed. ...

  • Planar 43P - page 21

    16 En English Installation and Connections How to Route Cables Speed clamps and bead bands are included with this unit for bunching cables together . Once components are connected, follow the following steps to route cables. 1 Organize cables together using the provided speed clamps. Insert 1 into an appropriate hole on the rear of the unit, then s ...

  • Planar 43P - page 22

    17 En Setting Up the System Français English Setting Up the System 6 Press 5 / ∞ to select SETTING, then press SET . SELECT ENTER EXIT SET MENU PICTURE SCREEN SET UP OPTION : N T : A UT O SET T I N CL AM P POWE R : G O FF PS I T I O N O MN A G E M E A IN P U T IN P U T 1 L E B LA : V GA MAIN MENU INPUT1 7 Press 2 / 3 to select the display mode. ...

  • Planar 43P - page 23

    18 En English Setting Up the System Setting Up the System CLAMP POSITION setup Depending on the signal, analog RGB signals may result in the screen image appearing with a whitish or greenish cast. In such cases, set “CLAMP POSITION” to LOCKED. ÷ Normally , leave this setting at AUTO. Setup of CLAMP POSITION 1 Press MENU to display the menu scr ...

  • Planar 43P - page 24

    19 En Operations English Selecting an Input Source This section explains the basic operation of this unit. Outlined on the following pages is how to turn the main power on and off, put this unit in the operation or standby mode and how to select connected components. Before you begin, make sure you have: • Made connections between this unit and p ...

  • Planar 43P - page 25

    20 En English Operations Operations T o adjust the volume ...

  • Planar 43P - page 26

    21 En Operations English Operations Screen Size Selection This unit incorporates screen modes of various height and width ratios. For optimal viewing, we recommend that you select the screen mode that best matches the video source that you are viewing. Although these modes are designed for full display of a picture on a wide screen, it is our hope ...

  • Planar 43P - page 27

    22 En English Operations Operations 4 P A R TIAL (*Suppo r ted only on PDP-50 P ) The P ARTIAL setting is available only during personal computer input (1280 x 1024/60 Hz only). The input signal and the screen maintain a dot to line ratio of 1:1. Display is highly faithful to the source. However , in order to maintain the 1:1 ratio, a portion of th ...

  • Planar 43P - page 28

    23 En Operations English Operations Partial Image Enlargement (POINT ZOOM) This display allows any one of nine screen areas (AREA 1 to AREA 9) to be selected and enlarged to x1.5, x2, x3, or x4. When performing point zoom enlargement, the direction buttons ( 5 / ∞ / 2 / 3 ) can be used to move the enlarged portion up-down and right-left. 1 Press ...

  • Planar 43P - page 29

    24 En English Operations 3 OFF ON 2 Automatic Power OFF This display is equipped with automatic power - management and auto-power -off functions, which allow the unit to automatically switch to power -saving mode when no sync signal is detected. (A warning message appears onscreen before these functions operate.) Notes ÷ The Power Management funct ...

  • Planar 43P - page 30

    25 En Display Panel Adjustments English Display Panel Adjustments Adjusting the Picture Quality 1 Press MENU to display the menu screen. MAIN MENU INPUT1 SELECT ENTER EXIT SET MENU PICTURE SCREEN SET UP OPTION : 0 : 6 + + + 0 : 60 : 60 : 0 : 0 CONT RA S T : 0 BR RL E V E L IG H T . . GL E V E L . BL E V E L . H E NHAN CE . V E NHAN CE . RS E T E 2 ...

  • Planar 43P - page 31

    26 En Display Panel Adjustments English Display Panel Adjustments Adjusting the Image Position and Clock (Automatic Adjustment) Pressing AUTO SET UP on either the display or the remote control unit will adjust the screen position and clock to optimum values. Note Perform this adjustment individually for each input function (INPUT 1, INPUT 2), and e ...

  • Planar 43P - page 32

    27 En Display Panel Adjustments English Manual Adjustment of Screen Position and Clock 1 Press MENU to display the menu screen. MAIN MENU INPUT1 SELECT ENTER EXIT SET MENU PICTURE SCREEN SET UP OPTION : 0 : 6 + + + 0 : 60 : 60 : 0 : 0 CONT RA S T : 0 BR RL E V E L IG H T . . GL E V E L . BL E V E L . H E NHAN CE . V E NHAN CE . RS E T E 2 Press 2 / ...

  • Planar 43P - page 33

    28 En Other Operations English Other Operations Rewriting the Input Display (INPUT LABEL) This function allows rewriting of the screen contents displayed with differing inputs. For example, the default “INPUT 1” can be changed to “COMPUTER” or other name describing the connected component (up to maximum of 8 characters). Example: T o rewrit ...

  • Planar 43P - page 34

    29 En Other Operations English Other Operations Power Control Function The power control function allows screen brightness to be suppressed as a means of lowering power consumption and reducing display deterioration. 1 Press MENU to display the menu screen. The menu will be displayed. MAIN MENU INPUT1 SELECT ENTER EXIT SET MENU PICTURE SCREEN SET U ...

  • Planar 43P - page 35

    30 En Other Operations English 4 Press SET to select INPUT 1. The factory default setting is OFF . Each time SET is pressed the selector function switches alternately as shown: ÷ When OFF is selected, AUTO FUNCTION is disabled. ÷ When INPUT 1 is selected, the display input automatically switches to INPUT 1 when a signal is detected at the INPUT 1 ...

  • Planar 43P - page 36

    Additional Information 31 En English ...

  • Planar 43P - page 37

    32 En English Additional Information General problems • No power • Unit cannot be operated. • Remote control does not operate. • INPUT is not changed. • Picture is cut off. • Strange color , light color , or dark, or color misalignment • Power is suddenly turned off. • No picture • Is the power cord disconnected? (page 15) • Has ...

  • Planar 43P - page 38

    Additional Information 33 En English Although this unit incorporates high precision technology in its design, please understand that there may be extremely slight pixel breakup, or light emission fault. Note In order to protect the panel and internal circuitry , this display is provided with a cooling fan designed to turn on/off and change speed au ...

  • Planar 43P - page 39

    34 En English Additional Information Specifications General (PDP-50 P ) Light emission panel ............ 50 inch plasma display panel Number of pixels .............................................. 1280 x 768 Power supply ............................. AC 100 - 120 V , 50/60 Hz Rated current ................................................. 3.8 A - ...

  • Planar 43P - page 40

    Additional Information 35 En English 56.4Hz 70.1Hz 60Hz 66.7Hz 72.8Hz 75Hz 85Hz 56Hz 60Hz 72Hz 75Hz 85Hz 74.6Hz 60Hz 60Hz 70Hz 75Hz (74.9Hz) 85Hz 60Hz 72Hz 75Hz 75.1Hz 66.0Hz 76.0Hz 56Hz 60Hz 70Hz 60Hz 60Hz 75Hz 85Hz 60Hz 65Hz 70Hz 75Hz 85Hz Additional Information Supplement 1 Resolution (Dot x Line) V ertical DOT BY DOT FULL P ARTIAL Remarks 640x4 ...

  • Planar 43P - page 41

    36 En English Additional Information 56.4Hz 70.1Hz 60Hz 66.7Hz 72.8Hz 75Hz 85Hz 56Hz 60Hz 72Hz 75Hz 85Hz 74.6Hz 60Hz 60Hz 70Hz 75Hz (74.9Hz) 85Hz 60Hz 72Hz 75Hz 75.1Hz 66.0Hz 76.0Hz 56Hz 60Hz 70Hz 60Hz 60Hz 75Hz 85Hz 60Hz 65Hz 70Hz 75Hz 85Hz Supplement 1 Resolution (Dot x Line) V ertical DOT BY DOT FULL Remarks 640x400 640x480 800 x600 832x624 852x ...

  • Planar 43P - page 42

    Additional Information 37 En English Additional Information Explanation of T erms Aspect ratio The TV screen ’ s width to height ratio is referred to as its aspect ratio. The aspect ratio on standard TVs is 4:3 and on wide TVs or High Definition TVs it is 16:9. G ON SYNC This indicates a video signal in the form of a synchronization signal added ...

  • Planar 43P - page 43

    38 En  © 2002 Planar Systems, Inc. 0 9 /02 Planar is a registered trademark of Planar Systems, Inc. Other brands and names are the property of their respective owners. T echnical information in this document is subject to change without notice. 020-0256-00 ...

Fabricant Planar Catégorie Flat Panel Television

Les documents que nous recevons du fabricant de l'appareilPlanar 43P peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Planar
- manuels d’utilisations 43P
- fiches produit Planar
- dépliants
- ou étiquettes-énergie Planar 43P
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Planar 43P.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Planar 43P, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Planar 43P. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Planar 43P.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Planar 43P, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Planar 43P par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Planar 43P.

Le manuel d’utilisation complet Planar, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Planar 43P - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Planar 43P, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lPlanar 43P qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Planar 43P - qui devraient nous aider dans les premières étapes lors de l'utilisation Planar 43P
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Planar 43P
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Planar 43P dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Planar 43P?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Planar 43P, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Planar 43P il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)