Français dropdown-ico

Manuel d’utilisation Henny Penny OFE- 291

40 pages 0.44 mb
Télécharger

Aller à la page of 40

Summary
  • Henny Penny OFE- 291 - page 1

    Model OFE- 291 3-1. OPERA TING COMPONENTS Frypot This reservoir holds the cooking shortening, and is designed to accommodate the heating elements, 6 head of product and an adequate cold zone for collection of cracklings Carrier This stainless steel carrier consists of five racks which contain the food product during and after frying Drain V alve A ...

  • Henny Penny OFE- 291 - page 2

    Model OFE- 291 3-1. OPERA TING COMPONENTS (Continued) High Limit This high temperature control senses the temperature of the shortening; if the temperature of the shortening exceeds 450°F (230°C), this control will open and shut off the heat to the frypot; when the temperature of the shortening drops to a safe operation limit, the control must be ...

  • Henny Penny OFE- 291 - page 3

    Model OFE- 291 3-3. SWITCHES AND Refer to image at the end of this section. INDICA T ORS Fig. Item Description Function No. No. 3 - 2 1 Lights when the control calls for heat; the elements come on and heats the shortening 3 - 2 2 Digital Display Shows all the functions of the Cook Cycle, Program Modes, Diagnostic Modes, and alarms 3 - 2 3 Only used ...

  • Henny Penny OFE- 291 - page 4

    Model OFE- 291 3-3. SWITCHES AND INDICA T ORS (Continued) Fig. Item Description Function No. No. 3 - 2 9 Press to access Program Modes; once in the Program Mode, it is used to advance to the next setting; if pressed along with it accesses the Information Mode which has historic information on the operator and fryer ’ s performance 3 - 2 10 Used t ...

  • Henny Penny OFE- 291 - page 5

    Model OFE- 291 403 3-5 14 1 2 3 4 5 6 7 8 9 13 1 1 12 10 Figure 3-2 ...

  • Henny Penny OFE- 291 - page 6

    Model OFE- 291 3-4. CLOCK SET Upon initial start-up, or PC board replacement, if “CLOCK SET” automatically appears in the display , start with step 4. 1. Press and hold for 5 seconds until “LEVEL 2” shows in display . 2. Press and “CLOCK SET”, “ENTER CODE” shows in display . 3. Press . 4. “CS-1, SET , MONTH”, and the month flash ...

  • Henny Penny OFE- 291 - page 7

    Model OFE- 291 3-4. CLOCK SET 14. Press and “CS-6, CLOCK MODE” shows in the (Continued) display , along with “1.AM/PM”. “1.AM/PM” is 12 hour time, “2.24-HR” is 24 hour time. Press to change. 15. Press and “CS-7, DA YLIGHT SA VINGS ADJ” shows in the display , along with “2.US”. Press to change to the following: a. “1.OFF” ...

  • Henny Penny OFE- 291 - page 8

    Model OFE- 291 3-5. FILLING OR ADDING SHOR TENING The shortening level must always be above the heating elements when the fryer is heating and at the frypot level indicators on the r ear of the frypot (Figur e 3-3). Failure to follow these instructions could r esult in a fir e and/or damage to the fryer . When using solid shortening, it is r ecomme ...

  • Henny Penny OFE- 291 - page 9

    Model OFE- 291 3-6. PRODUCT RACKING RECOMMENDA TIONS The rack positions are referenced starting at the bottom: 4 _____________ 3 _____________ 2 _____________ 1 _____________ The bottom position is to be avoided on small loads because it is closer to the cold zone. (The oil is cooler at the bottom of the frypot and hotter at the top.) W ith bigger ...

  • Henny Penny OFE- 291 - page 10

    Model OFE- 291 3-7. BASIC OPERA TION Follow the procedures below on the initial start-up of the fryer , and each time the fryer is brought from a cold, or shut down condition, back into operation. These are basic instructions. 1. Fill shortening to the proper level in the frypot; to the lower level indicator BE CER T AIN THE SHOR TENING IS NEVER AB ...

  • Henny Penny OFE- 291 - page 11

    Model OFE- 291 3-7. BASIC OPERA TION 4 . Allow fryer to heat until illuminates. (Continued) Bypass the melt cycle, if desired, by pressing a product button and holding it for five seconds. The display shows “EXIT MEL T? 1=YES 2=NO”. Press to exit melt. Do not bypass the Melt Cycle unless enough shortening has melted to completely cover all of t ...

  • Henny Penny OFE- 291 - page 12

    Model OFE- 291 3-7. BASIC OPERA TION 8. Unlatch and raise the lid cautiously . (Continued) 9. Using the rack handles, remove the racks of product from the carrier , starting with the top rack, to prevent damaged product. 10 . If a Quality time (hold time) was programmed, the controller automatically starts the hold timer . The display alternately s ...

  • Henny Penny OFE- 291 - page 13

    Model OFE- 291 3-8. CARE OF THE SHOR TENING FOLLOW THE INSTRUCTIONS BELOW T O A V OID SHOR TENING OVERFLOWING THE FR YPOT , WHICH COULD RESUL T IN SERIOUS BURNS, PERSONAL INJURY , FIRE, AND/OR PROPERTY DAMAGE. 1. T o protect the shortening when the fryer is not in immediate use, the fryer should be put into the Idle Mode. 2. Frying breaded products ...

  • Henny Penny OFE- 291 - page 14

    Model OFE- 291 3-9. FIL TERING INSTRUCTIONS (continued) FIL TER ONL Y WHEN THE SHOR TENING TEMPERA TURE IS LESS THAN 275° F (135° C). FAILURE T O DO SO CAN RESUL T IN SHOR TEN- IN G OVERFLOWING THE FR YPOT , CAUSING SERIOUS BURNS, PERSONAL INJUR Y , AND/OR PROPER TY DAMAGE. High volume cooking could cause the cold zone to fill quicker with crackl ...

  • Henny Penny OFE- 291 - page 15

    Model OFE- 291 3-9. FIL TERING INSTRUCTIONS (Continued) BRUSH ALL CRACKLINGS FROM FRYPOT SURF ACES AND THE COLD ZONE DURING THE FIL TERING PROCESS. FAILURE TO DO SO CAN RESUL T IN SHOR TENING OVERFLOWING THE FR YPOT , WHICH COULD CAUSE SERIOUS BURNS, PERSONAL INJUR Y , FIRE AND/OR PROPER TY DAMAGE. 5. When all of the shortening has drained, scrape ...

  • Henny Penny OFE- 291 - page 16

    Model OFE- 291 c. Rinse the frypot interior . Especially work on hard to clean areas, like the frypot bottom and burner tubes. d . After thorough rinsing with shortening, close the drain valve. e. T urn the COOK/PUMP switch to the OFF position. ONL Y CONNECT AND DISCONNECT THE FIL TER RINSE HOSE WHEN THE MAIN POWER SWITCH IS IN THE OFF POSITION. AL ...

  • Henny Penny OFE- 291 - page 17

    Model OFE- 291 3-10. CHANGING THE FIL TER ENVELOPE (Continued) 4 . Lift the filter screen assembly from the drain pan. 5 . W ipe the shortening and crumbs from the filter drain pan. Clean the filter drain pan with soap and water . Thoroughly rinse with hot water . 6. Unthread the standpipe from the filter screen assembly . 7 . Remove the crumb catc ...

  • Henny Penny OFE- 291 - page 18

    Model OFE- 291 3-1 1. FIL TER PUMP MOT OR The filter pump motor is equipped with a manual reset button, PROTECTOR-MANUAL located on the rear of the motor , in case the motor overheats. If RESET motor won’t run, wait about 5 minutes before attempting to reset this protective device to allow motor to cool. Remove the access panel on the left side p ...

  • Henny Penny OFE- 291 - page 19

    Model OFE- 291 3-12. CLEANING THE FR YPOT 2. If hot shortening is present in the frypot, it must be (Continued) drained by slowly pulling the drain handle out towards you. 3. Close the drain valve and discard the shortening. 4. Raise lid, remove the racks and carrier from lid, and tilt lid back, so that the lid won’t interfere with cleaning. 5. F ...

  • Henny Penny OFE- 291 - page 20

    Model OFE- 291 3-12. CLEANING THE FR YPOT 7 . Using the fryer brush (Henny Penny part number 12105) (Continued) scrub the inside of the frypot, the lid, and around the counter -top of the fryer . W atch the cleaning solution constantly to make sur e it does not boil over causing damage to contr ols. Do not use steel wool, other abrasive cleaners or ...

  • Henny Penny OFE- 291 - page 21

    Model OFE- 291 3-13. REGULAR MAINTENANCE As in all food service equipment, the Henny Penny open fryer does require care and proper maintenance. The table below provides a summary of scheduled maintenance. The following paragraphs provide step-by-step maintenance procedures to be performed by the operator . Procedure Frequency Filtering of shortenin ...

  • Henny Penny OFE- 291 - page 22

    Model OFE- 291 3-15. PROGRAMMING Change Product Names (Continued) a. Press and release and the first letter , or digit, starts flashing. b. Press and release to change the flashing letter . c. T o continue to the next letter , press . Then press to change this letter . d. Repeat step c until up to 7 letters are entered. e. Press and hold to exit Pr ...

  • Henny Penny OFE- 291 - page 23

    Model OFE- 291 3-15. PROGRAMMING 8. Press and release and “2. STEP 2 A T” shows in (Continued) display , along with a step 2 time. If no step 2 is desired, set time to “0:00” and press . If a step 2 is desired, press and set a time. Then press to set the temperature. Up to 10 steps can be programmed for a product, repeating the above step f ...

  • Henny Penny OFE- 291 - page 24

    Model OFE- 291 1 1. Press and release and “LOAD COMP” shows in the display along with the load compensation value. This automatically adjusts the time to account for the size and temperature of the cooking load. Press and release to change this value to a max. of 20 and a min. of 0, or “OFF”. Preset at factory at 5. 12. Press and release an ...

  • Henny Penny OFE- 291 - page 25

    Model OFE- 291 “2,Mixed” a . “FIL TER AFTER” shows in the display , along with the preset number of Cook Cycles. b. Press and release until the desired number of Cook Cycles between filters shows in the display . For example, if 4 is set for a product, each time that product is selected, it counts 1/4, or 25%. Then each time a product is co ...

  • Henny Penny OFE- 291 - page 26

    Model OFE- 291 The following are examples of copying and erasing products: Copying Press to select the presently displayed “COPY A PROD” option. “COPY __ TO __” shows in display . The first set of “_” is blinking. Select the product you wish to copy from , for example, by pressing the button: “COPY 2 TO __” shows in display . Next, ...

  • Henny Penny OFE- 291 - page 27

    Model OFE- 291 3-16. SPECIAL PROGRAM The Special Program mode is used to set more detailed MODE parameters listed below . SP-1 · Degrees Fahrenheit or Celsius SP-2 · Language: English, French, German, Spanish, and Portuguese SP-3 · System initialization SP-4 · Audio volume SP-5 · Audio tone SP-6 · T ype of shortening to be melted - liquid, so ...

  • Henny Penny OFE- 291 - page 28

    Model OFE- 291 Language (SP-2) a. Follow steps 1 and 2 above. b. Press and release button. “SP-2” and “LANGUAGE” flashes on the display , along with the language (Ex:” 1.ENGL”) c. T o toggle to the desired language, press and release . System Initialization (SP-3) This step resets the controls, but doesn’t erase product settings. a. F ...

  • Henny Penny OFE- 291 - page 29

    Model OFE- 291 T ype of shortening to be melted - Liquid or Solid (SP-6) The Melt Cycle can be set to the type of shortening being used. a. Follow steps 1 and 2 above. b. Press and release 5 times. “SP-6” and “MEL T CYCLE SELECT” flashes on the display , along with “l=LIQ” or “2=SOLID”. c. Press to toggle from one type to another . ...

  • Henny Penny OFE- 291 - page 30

    Model OFE- 291 3-16. SPECIAL PROGRAM e . Change the idle setpoint temperature, by pressing MODE (Continued) f. Press and release . “SP-7B” and “AUTO-IDLE MINUTES” shows in the display , along with the preset time. g . Press to set the minutes the cooker stays idle before the Auto-idle is enabled; 60 the maximum, OFF the minimum. Ex: “30? ...

  • Henny Penny OFE- 291 - page 31

    Model OFE- 291 3-16. SPECIAL PROGRAM f . Press and “SP-8C” shows in the display , if YES MODE (Continued) was chosen in step e. “FIL TER LOCKOUT A T…” and a value between 100% and 200% shows in display . Press to change this value. g. Press and “SP-8D” shows in the display , followed by “LOCKOUT -HEA T OIL... and a temperature (pres ...

  • Henny Penny OFE- 291 - page 32

    Model OFE- 291 1005 3-32 3-16. SPECIAL PROGRAM MODE (Continued) SCHEDULE m . If “4,SCHED” is selected, “SP-8A” shows in the display , and followed by “SCHEDULE”. Press the and up to 4 different times of day can be programmed, by pressing . . EX: SP-8A “SCHEDULE” F1: 10.00A SP-8B “SCHEDULE” F2: 2.00P SP-8C “SCHEDULE” F3: 8.00 ...

  • Henny Penny OFE- 291 - page 33

    Model OFE- 291 Product Buttons (Sp-9) This mode allows you set up the way products are selected, and Cook Cycles started, in the cook mode. a. Follow steps 1 and 2 above. b. Press and release until “SP-9” and “PRODUCT BUTT ONS” flashes in the display . c. When using the first option, “1,COOK”, pressing a product button displays that pro ...

  • Henny Penny OFE- 291 - page 34

    Model OFE- 291 3-16. SPECIAL PROGRAM MODE (Continued) Program Code Change (SP-15) This allows the operator to change the program code (factory set at 1, 2, 3) used to access Product Programming, Special Programming, Clock Set, Data Comm, and Heat Control Modes. a. Follows steps 1 and 2 above. b. Press until “SP-15” and “CHANGE, MGR CODE, 1=YE ...

  • Henny Penny OFE- 291 - page 35

    Model OFE- 291 e. If satisfied with code, press . “*CODE CHANGE*” shows in display . f. If not satisfied with code, press and *CANCELLED* shows in display , then reverts back to “SP-16” and “CHANGE USG CODE ? 1=YES”. Then the above steps can be repeated. Change Shortening-A-Cook Cycles (SP-17) The operator can set a reminder to filter t ...

  • Henny Penny OFE- 291 - page 36

    Model OFE- 291 3-18. INFORMA TION MODE This mode gathers and stores historic information on the fryer and operator ’ s performance. Press and at the same time and “*INFO MODE*” shows on display . Press or to access the steps and press to view the statistics within each step. Information Mode is intended for technical use, but the operator can ...

  • Henny Penny OFE- 291 - page 37

    Model OFE- 291 3-17. INFORMA TION MODE 2. LAST LOAD (Continued) Press to view the following information from the most recent Cook Cycle. FUNCTION DISPLA Y EX: T ime of day the last cook cycle was started STARTED 10.25A Product (Last product cooked) PRODUCT -2- Ready? (W as fryer Ready before start?) READY? YES S topped: T ime remaining, or secs pas ...

  • Henny Penny OFE- 291 - page 38

    Model OFE- 291 3-18. INFORMA TION MODE 4. REVIEW USAGE (Continued) Press to view the accumulated information since the data was manually reset: FUNCTION DISPLA Y EX: Day the usage data was previously reset SINCE APR-19 Number of hours the fryer was on PWR ON HRS 165 Number of times oil was filtered FILTERED 34 T otal number of cook cycles TOTAL CK ...

  • Henny Penny OFE- 291 - page 39

    Model OFE- 291 3-18. INFORMA TION MODE Press to view the specific status of each input. An (Continued) underscore (“_”) indicates the input is not presently detected. A checkmark (“ ”) indicates the signal is detecting a normal input. A blinking (“X”) indicates the signal is presently detected, but is detected as a half-wave (partially ...

  • Henny Penny OFE- 291 - page 40

    Model OFE- 291 3-18. INFORMA TION MODE Press and “6. PMP_ AIR_” shows in display . (Continued) Press to view the amp “DRA W” status of the pump motor output and air valve output. “PMP ” and “AIR ” in the display means the amps are good. A flashing “X” behind the “PMP” or “AIR” means too much current. Press to view the No ...

Fabricant Henny Penny Catégorie Fryer

Les documents que nous recevons du fabricant de l'appareilHenny Penny OFE- 291 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Henny Penny
- manuels d’utilisations OFE- 291
- fiches produit Henny Penny
- dépliants
- ou étiquettes-énergie Henny Penny OFE- 291
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Henny Penny OFE- 291.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Henny Penny OFE- 291, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Henny Penny OFE- 291. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Henny Penny OFE- 291.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Henny Penny OFE- 291, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Henny Penny OFE- 291 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Henny Penny OFE- 291.

Le manuel d’utilisation complet Henny Penny, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Henny Penny OFE- 291 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Henny Penny OFE- 291, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lHenny Penny OFE- 291 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Henny Penny OFE- 291 - qui devraient nous aider dans les premières étapes lors de l'utilisation Henny Penny OFE- 291
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Henny Penny OFE- 291
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Henny Penny OFE- 291 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Henny Penny OFE- 291?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Henny Penny OFE- 291, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Henny Penny OFE- 291 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)