Français dropdown-ico

Manuel d’utilisation Snapper ELP21703BDV

24 pages 1.06 mb
Télécharger

Aller à la page of 24

Summary
  • Snapper ELP21703BDV - page 1

    Safety Instructions & Operator's Manual for NOTE: Specifications are correct at time of printing and are subject to change without notice. * Actual sustained engine power will likely be lower due to operating limitations and environmental factors. Please refer to ‘Engine Power Rating Information’ for further details. Manual No. 7101608 ...

  • Snapper ELP21703BDV - page 2

    Thank Y ou for pur chasing this quality-built Snapper product. We’re pleased that you placed your confidence in the Snapper brand. When operated and maintained according to the instructions in this manual, your Snapper product will provide many years of dependable service. This manual contains safety information to make you aware of the hazards a ...

  • Snapper ELP21703BDV - page 3

    1 Operator Safety Features and Controls Operation Maintenance T roubleshooting Warranties T able of Contents Operator Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Important Operator Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Decal Identification ...

  • Snapper ELP21703BDV - page 4

    www .snapper .com 2 Operator Safety ! ! WARNING: This powerful cutting machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply with the following SAFETY instructions could result in serious injury or death to the operator or other persons. The owner of the machine must understand the ...

  • Snapper ELP21703BDV - page 5

    3 Operator Safety ! ! Important Operator Safety Instructions (Continued) Safe Handling of Gasoline (Continued From Previous Page) 6. DO NOT fill fuel containers inside a vehicle or on a truck or trailer bed with a plastic liner . Always place the contain- ers on the ground away from the vehicle before filling. 7. Remove gas-powered equipment from t ...

  • Snapper ELP21703BDV - page 6

    www .snapper .com 4 Operator Safety (2) Warning Instructions: A. Read, understand and follow instructions and warnings in the operator’ s manual, as well as on the mower , engine and attachments before operating. B. Indicates possible severe injury from rotating cutting blades. C. Do not operate without entire grass catcher or guard in place. D. ...

  • Snapper ELP21703BDV - page 7

    5 Operator Safety (3) Engine Speed Control: Indicates direction to increase engine RPM (rabbit), decrease engine RPM (turtle). (4) Speed Selector: Indicates ground speed selection: ‘3’ (Rabbit) indicates top speed; ‘2’, medium speed; ‘1’ (T urtle), slowest speed. Decal Identification (Continued) (5) Operator Presence Control (OPC): Arro ...

  • Snapper ELP21703BDV - page 8

    www .snapper .com 6 Features and Controls IMPORT ANT The figures and illustrations in this manual are provided for reference only and may differ from your specific model. Contact your Snapper dealer if you have questions. Features and Controls A. Oil Fill Cap and Dipstick B. Fuel Filler Cap C. Mower Deck D. Handle Bracket E. Height-of-Cut Adjustmen ...

  • Snapper ELP21703BDV - page 9

    7 Operation Pre-Start Check List Make the following checks and perform the ser vice required before each start-up. 1. Check the guards, deflectors, grass bag, adapter , and covers to make sure all are in place and securely tightened. 2. Check the blade control (A, Figure 1) , wheel drive control (B) , and ground speed control (C) to insure they wor ...

  • Snapper ELP21703BDV - page 10

    www .snapper .com 8 Operation Operation (Continued) Starting and Operation (Continued) Propelling the Mower 1. Start the engine. Refer to the Section entitled “Starting and Operation – Engine and Blade”. 2. Move the ground speed control (A, Figure 4) to the desired speed position. 3. Squeeze the wheel drive control (B) against the handle to e ...

  • Snapper ELP21703BDV - page 11

    9 Operation Operation (Continued) Cutting Height Adjustment 1. Pull the cutting height adjusting handle (A, Figure 6) outward and move to the desired cutting height. Recycling Operation Converting this mower to the recycling operation requires no tools. First, STOP the engine. Raise the discharge door (A, Figure 7) located at the rear of machine. R ...

  • Snapper ELP21703BDV - page 12

    www .snapper .com 10 Operation Operation (Continued) Installing the Grass Catcher 1. Follow the WARNING statement found on this page. 2. Lift the discharge door (A, Figure 8) located at the rear of the machine. 3. Install the grass catcher (B) onto the rear of the machine. Position the rod ends (C) of the catcher frame over the tabs (D) located at ...

  • Snapper ELP21703BDV - page 13

    11 Maintenance Maintenance Maintenance - Introduction T o retain the quality of the mower , use genuine SNAPPER replacement parts only . Contact a local SNAPPER dealer for parts and service assistance. For the correct part or information for a particular mower , always mention the model and serial number . Ser vice - After First 5 Hours Change Engi ...

  • Snapper ELP21703BDV - page 14

    www .snapper .com 12 Maintenance Maintenance (Continued) Check Mower Blade 1. Disconnect the spark plug wire and secure the end away from the plug. 2. Tilt the mower up on its rear wheels for access to the blade cap screws (A, Figure 10) . Do not tilt the mower with the spark plug or carburetor down. Important: Drain the fuel tank before tipping th ...

  • Snapper ELP21703BDV - page 15

    13 Maintenance Maintenance (Continued) Mower Blade Replacement Standard Blade Wear Limit 1. Inspect the blade (Figure 11) frequently for signs of excessive wear or damage: (A) New blade (B) Wear limit (notch starts) (C) Dangerous condition! Do not use on the mower! Replace with a new blade. Blade Sharpening 1. Disconnect the spark plug wire and sec ...

  • Snapper ELP21703BDV - page 16

    www .snapper .com 14 Maintenance Maintenance (Continued) Blade Sharpening (Continued) 4. Sharpen the blade on a grinding wheel at an angle of 22 to 28 degrees (B, Figure 13) . DO NOT sharpen the blade beyond the original cutting edge (A) . 5. Check blade for balance. If necessary , correct balance by grinding heavy end of blade. 6. Reinstall blade ...

  • Snapper ELP21703BDV - page 17

    15 Maintenance Maintenance (Continued) Belt Ser vice The condition of the engine to transmission belt should be checked after every 25 hours of mower operation. Engine T o T ransmission Belt Replacement 1. Follow the WARNING statement found on this page. 2. Remove the retaining screw (F , Figure 15) that secures the belt cover (E) . Remove the belt ...

  • Snapper ELP21703BDV - page 18

    www .snapper .com 16 Maintenance Maintenance (Continued) ITEM SERVICE PERFORMED REF . EACH USE 5 HRS 25 HRS 50 HRS 100 HRS EACH SEASON Engine Oil Check Oil Level Page 7 X Initial Oil Change Page 11 X Periodic Oil Change Page 12 X* Air Pre-Cleaner Clean Sponge Element Engine Manual X** Air Cleaner Clean or Replace Engine Manual X** Spark Plug Replac ...

  • Snapper ELP21703BDV - page 19

    17 T roubleshooting T roubleshooting PROBLEM PROBABLE CAUSE CORRECTIVE ACTION Engine Will Not Start Using Recoil Starter 1. Fuel tank empty . 1. Fill fuel tank with fresh fuel. 2. Engine needs choking. 2. Choke engine. 3. Spark plug wire disconnected. 3. Place spark plug wire onto spark plug. Engine Stalls or Stops After Running 1. Blade control is ...

  • Snapper ELP21703BDV - page 20

    www .snapper .com 18 Warranties 2 YEAR LIMITED WARRANTY For two (2) years from purchase date for the original pur chaser’ s residential, non-commercial use, SNAPPER, through any authorized SNAPPER dealer will replace, free of charge (except for taxes where applicable), any part or parts found upon examination by the factory at McDonough, Georgia, ...

  • Snapper ELP21703BDV - page 21

    19 Slope Guide ...

  • Snapper ELP21703BDV - page 22

    www .snapper .com 20 Notes ...

  • Snapper ELP21703BDV - page 23

    21 Notes ...

  • Snapper ELP21703BDV - page 24

    www .snapper .com Snapper Products 535 Macon Street McDonough, GA 30253 1-800-935-2967 22 EUROPEAN 21” CAST ALUMINUM DECK W ALK MOWERS SERIES 3 Engine Power Rating Information: The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive Engineers) code J1940 (Small Engine Power & T orque Ra ...

Fabricant Snapper Catégorie Lawn Mower

Les documents que nous recevons du fabricant de l'appareilSnapper ELP21703BDV peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Snapper
- manuels d’utilisations ELP21703BDV
- fiches produit Snapper
- dépliants
- ou étiquettes-énergie Snapper ELP21703BDV
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Snapper ELP21703BDV.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Snapper ELP21703BDV, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Snapper ELP21703BDV. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Snapper ELP21703BDV.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Snapper ELP21703BDV, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Snapper ELP21703BDV par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Snapper ELP21703BDV.

Le manuel d’utilisation complet Snapper, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Snapper ELP21703BDV - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Snapper ELP21703BDV, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lSnapper ELP21703BDV qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Snapper ELP21703BDV - qui devraient nous aider dans les premières étapes lors de l'utilisation Snapper ELP21703BDV
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Snapper ELP21703BDV
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Snapper ELP21703BDV dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Snapper ELP21703BDV?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Snapper ELP21703BDV, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Snapper ELP21703BDV il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)