-
Knoll Systems HD102 - page 1
HD102 HDTV DLP Projector Users Manual v1.1 ...
-
Knoll Systems HD102 - page 2
2 FCC Warning Note: This equipment has been tested and found to comply with t he limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, ...
-
Knoll Systems HD102 - page 3
3 TABLE OF CONTENTS Safety Warnings 2 Introduction 5 Positioning the projector 6 Projecto r and Devic e Connec tor Guide 6 Computer connections 6 Video connections 7 Connecting a computer source 8 Required computer con nections 8 Optional computer connections 8 Displaying a computer source im age 9 Adjusting the image 9 Using the projector with Wi ...
-
Knoll Systems HD102 - page 4
4 Important Operating Considerations for Safety • Place the projector in a horizontal position no greater than 15 degrees off axis. • Locate the projector in a well-ventilated area without any obstructions to inta ke or exhaust vents. • Do not place the projector on a tablecloth or other soft covering that may block the vents. • Locate the ...
-
Knoll Systems HD102 - page 5
5 Introduction Congratulations and thank you for your excellent choice of a superior digital image projection device. Your new Knoll HD102 projector is specifically designed for home cinema applications. The HD102 sets a high standard using the latest DLP™ technology and new DCDi Plus video processing from Faroudja™. Whether you are watching mo ...
-
Knoll Systems HD102 - page 6
6 12-volt DC output The 3.5mm mini-jack trigger provides a 12-volt DC output. It provides a constant output while the projector is on. It has numerous uses. For example, if you connec t your projection screen to the 12-volt DC output with the cable that came with your screen, when you turn on the projector the screen will move down; when you turn t ...
-
Knoll Systems HD102 - page 7
7 Video connections The first step for connecting video is deciding what type of output connector you want to connect to the projector. If there is more than one outpu t, select the one with the highest quality. The best quality ranking, with 1 being the highest and 3 being the lowest, is: 1. component video (RCA) 2. S-video 3. audio/visual composi ...
-
Knoll Systems HD102 - page 8
8 Video Device Video Compatibility If Your Device Connector is Attached to Adapter or Labeled Connector on projector For Setup Instructions see Comments HDTV (High Definition TV) 1035i, 1080i, 720p Component 480i, 480p, 576i, 576p DVI Component Video Computer In (DVI) Video 1 (component RCA) DVI connection on page 12 Component on page 13 Progressiv ...
-
Knoll Systems HD102 - page 9
9 Displaying a computer source image Remove the lens cap. Toggle the Pow er switch on the side of the projector to the On position. The LED flashes green and the fans start to run. When the lamp comes on, the start up screen displays and the LED is steady green. It can take a minute for the image to achieve full brightness. ? No start up screen? Ge ...
-
Knoll Systems HD102 - page 10
10 Press the top Keystone button to reduce the upper part of the image, and press the bottom Key stone button to reduce the lower part. Adjust the Contrast or Bri ghtness in the Picture menu. See page 21 for help with these menu adjustments. Using the projector with Window s 98 for the first time The first time you connect a computer running Window ...
-
Knoll Systems HD102 - page 11
11 Connecting a video device You can connect video devices such as VCRs, DVD pl ayers, camcorders, digital cameras, video game consoles, HDTV receivers, and TV tuners to the projecto r. There is also an audio input via the red and white A/V connectors. You can connect the audio directly to the projector to get sound from the built-in speaker, or y ...
-
Knoll Systems HD102 - page 12
12 Plug a white connector into the left audio out connec tor on the video device and plug a red connector into the right audio out connector on the video device. Plug the remaining white connector into the w hite audio in c onnector on the projector, and plug the re maining red connector into the red audio in connector on the projector. Keep in min ...
-
Knoll Systems HD102 - page 13
13 Displaying video Remove the lens cap. Toggle the Pow er switch on the side of the projector to the On position. The LED flashes green and the fans start to run. When the lamp comes on, the start-up screen is displayed and the LED is steady green. It can take a minute for the image to achieve full brightness. ? No start up screen? Get help on pag ...
-
Knoll Systems HD102 - page 14
14 Adjust the Contrast, Brightness, Color, Tint, or Aspect Ratio in the Picture menu. See page 22 for help with the menus and these adjustments. For Aspect Ratio, keep in mind that DVD players must be configured for 16:9 in order to view the highest quality image. For more information regarding Aspect Ratio, see page 11. Shutting down the projector ...
-
Knoll Systems HD102 - page 15
15 Table 1: LED behavior and meaning LED color/behavior Meaning Solid Green The power switch has been t oggled on and the software has initialized or the projector has been powered of f via the remote. Blinking Green The power switch has been t oggled on and the software is initializing, or the projector is po wering down and the fans are running t ...
-
Knoll Systems HD102 - page 16
16 ...
-
Knoll Systems HD102 - page 17
17 ...
-
Knoll Systems HD102 - page 18
18 If you still need assistance, visit our w ebsite or call us . See the inside of the back cover for support contact information. This product is backed by a limited warr anty. When sending the projector in for repair, we recommend shipping the unit in its original packing material, or having a professional packaging company pack the unit. Please ...
-
Knoll Systems HD102 - page 19
19 Using the remote control The remote uses two (2) provided AAA batteries. They are easily installed by sliding the cover off the remote’s back, aligning the + and - ends of the batteries, sliding them into place, and t hen replacing the cover. To operate, point the remote at the projection screen or at the projector (not at the vi deo device or ...
-
Knoll Systems HD102 - page 20
20 Connecting external speakers The projector can be attached to external speakers that have their own pow er source by plugging a speaker cable (not included) into the projectors Audio Out connector. Using the keypad buttons Most buttons are described in detail in other sect ions, but here is an overview of their functions: Menu –opens the on-sc ...
-
Knoll Systems HD102 - page 21
21 • Select a different standard if necessary. See page 23. • Make sure your DVD player is set for a 16:9 te levision. See your DVD player’s user’s guide for instructions. Customizing the projector You can customize the projector for your specific setup and needs. • For rear projection, turn rear mode on in the Settings>System menu. ? ...
-
Knoll Systems HD102 - page 22
22 Picture menu To adjust the following settings, highlight the setting, press Select , use the up and down arrows to adjust the values, then press Select to confirm the changes. Keystone : adjusts the image vertically and makes a squarer image. You can also adjust keystone from the keypad. Contrast : controls the degree of differ ence betw een the ...
-
Knoll Systems HD102 - page 23
23 CCS : (Cross-Color Suppression) processes the signal to remove any color information from the luma portion of the signal. It is On for all composite signals, and can be turned off for S-video and interlaced component signals. Sharpness : (video sources only) changes the clarity of the edges of a vi deo image. Select a sharpness setting. Color Sp ...
-
Knoll Systems HD102 - page 24
24 Settings menu A udio: allows adjustments to Volume of the internal speaker and allows a chime to play w hen starting the projector. Adjustments can also be m ade from the projector’s keypad and the remote. Sources: determines which source the projector checks first for active video during power-up. When Autosource is selected, the Source Enabl ...
-
Knoll Systems HD102 - page 25
25 Service : To use these features, highlight them and press Select . Factory Reset : restores all settings to their default. Lamp Reset : resets the lamp hours used counter in the About menu to zero. Do this only after changing the lamp. Service Code : only used by authorized service personnel. A bout : provides information about the projector and ...
-
Knoll Systems HD102 - page 26
26 WA RNING : To avoid burns, allow the projector to cool for at least 30 minutes bef ore you replace the lamp . Do not drop the lamp housing or touch the glass bulb! The glass may shatter and cause injury . Be extremely careful w hen removing the lamp housing. In the unlikely event that the bulb ruptures, small glass fragments may be generated. Th ...
-
Knoll Systems HD102 - page 27
27 Appendix 1: HD102 Projection Throw Distance (16:9 Aspect Screen) Screen Diagonal 92" 103" 106" 110" 122.5" 146.75" Minimum Distance 139.5" 156.1" 160.7" 166.7" 185.7" 222.5" Maximum Distance 167.2" 187" 192.5" 200" 222.7" 266.8" Screen offset 7.3" 8.2& ...
-
Knoll Systems HD102 - page 28
28 LIMITED WARRANTY Knoll Systems, Inc. (“Knoll”) w arrants that each HD102 (“the Product”) sold hereunder will conform to and function in accordance with the w ritt en specifications of Knoll. Said limited warranty shall apply only to the first person or entity that purchas es the Product for personal or busi ness use and not for the purpo ...
Avez-vous une question à propos de Knoll Systems HD102?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec Knoll Systems HD102, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Knoll Systems HD102 il est probable qu’il a envie de partager la façon de le résoudre.