Manuel d’utilisation Universal Microelectronic T8511G

12 pages 0.26 mb
Télécharger

Aller à la page of 12

Summary
  • Universal Microelectronic T8511G - page 1

    X-XX UL INST ALLA TION INSTRUCTIONS ®U.S. Registered Trademark • • All Rights Reserved Microelectronic Heat Pump Thermostats T851 1G APPLICA TION The T8511G Microelectronic Heat Pump Thermostat provides electronic control of 24 Vac, two-stage heating and one- stage cooling heat pump systems. Refer to Table 1 for a general description of the th ...

  • Universal Microelectronic T8511G - page 2

    69-0961—4 2 MICROELECTRONIC HEA T PUMP THERMOST A T Fig. 1. Typical location of thermostat. 5 FEET [1.5 METERS] YES NO NO NO M10106 Fig. 2. Mounting the wallplate. 2. Use a pencil to mark the mounting holes. See Fig. 2. 3. Remove the wallplate from the wall and drill two 3/16 inch holes in the wall (if drywall) as marked. For firmer material such ...

  • Universal Microelectronic T8511G - page 3

    69-0961—4 3 MICROELECTRONIC HEA T PUMP THERMOST A T Fig. 3. Typical hookup in heat pump application. Fig. 4. Typical hookup in heat pump system with emergency heat relay. Fig. 5. Typical hookup in heat pump application with emergency heat relay and O/B terminal. Fig. 6. Proper wiring technique. Mounting Thermostat 1. Engage tabs at the top of the ...

  • Universal Microelectronic T8511G - page 4

    69-0961—4 4 MICROELECTRONIC HEA T PUMP THERMOST A T Fig. 10. T8511G (automatic changeover) system and fan key locations. NOTE: Always press the system and fan keys with your fingertip or similar blunt tool. Sharp instruments like a pen or pencil point can damage the keyboard. T emperature Settings The default setpoint for heat is 70 ° F (21 ° C ...

  • Universal Microelectronic T8511G - page 5

    69-0961—4 5 MICROELECTRONIC HEA T PUMP THERMOST A T INST ALLER SETUP NOTE: For most applications, the thermostat factory settings do not need changing. Review the Factory Setting column in Table 2 and if no changes are necessary, go to the Installer System-Test section. Use the Installer Setup to customize the thermostat to specific systems. Some ...

  • Universal Microelectronic T8511G - page 6

    69-0961—4 6 MICROELECTRONIC HEA T PUMP THERMOST A T Table 2. Thermostat Installer Setup Options (Continued). Installer Setup Number (Press i key Factory Setting Other Choices (Press ▲ or ▼ key to change) Actual Select to change) Display Description Display Description Setting Extended fan operation in heating. 19 00 No extended fan operation ...

  • Universal Microelectronic T8511G - page 7

    69-0961—4 7 MICROELECTRONIC HEA T PUMP THERMOST A T Em HeatOffCool Auto Only Heat Cool OnAuto System Fan Room Outdoor Em Ht Temporary Setting Wait %Humid Aux Ht Remote Repl Batt M4844 INST ALLER SYSTEM-TEST Use the Installer System-Test to check the thermostat configurations and operation. Refer to Table 3 for a list of the available system-tests ...

  • Universal Microelectronic T8511G - page 8

    69-0961—4 8 MICROELECTRONIC HEA T PUMP THERMOST A T Table 4. Installer System-Test Options (Continued). M6791 M4864 M4865 M4866 Thermostat Information 1. Press the Information i key to access the thermo- stat information. 2. Press the increase ▲ key to display the production date code. The first two large digits are the month and the third digi ...

  • Universal Microelectronic T8511G - page 9

    69-0961—4 9 MICROELECTRONIC HEA T PUMP THERMOST A T M4867 5. Press the increase ▲ key again to display the EEPROM identification code (Example: 222 = EEPROM ID 222). 6. Press and hold the increase ▲ and decrease ▼ keys until the room temperature is displayed to exit the system-test. The system-test times out after five minutes without any k ...

  • Universal Microelectronic T8511G - page 10

    69-0961—4 10 MICROELECTRONIC HEA T PUMP THERMOST A T TROUBLESHOOTING GUIDE (Continued) a Available on select models. Symptom Possible Cause Action Heating will not come on. Thermostat minimum off-time is activated. Wait up to five minutes for the system to respond. (continued) System selection is not set to Heat. Set system selection to Heat. O/B ...

  • Universal Microelectronic T8511G - page 11

    69-0961—4 11 MICROELECTRONIC HEA T PUMP THERMOST A T ...

  • Universal Microelectronic T8511G - page 12

    Honeywell Limited-Honeywell Limitée 35 Dynamic Drive Scarorough, Ontario M1V 4Z9 69-0961—4 G.H. Rev . 05-04 Automation and Control Solutions Honeywell International Inc. 1985 Douglas Drive North Golden Valley, MN 55422 www .honeywell.com/yourhome ...

Fabricant Universal Microelectronic Catégorie Thermostat

Les documents que nous recevons du fabricant de l'appareilUniversal Microelectronic T8511G peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Universal Microelectronic
- manuels d’utilisations T8511G
- fiches produit Universal Microelectronic
- dépliants
- ou étiquettes-énergie Universal Microelectronic T8511G
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Universal Microelectronic T8511G.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Universal Microelectronic T8511G, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Universal Microelectronic T8511G. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Universal Microelectronic T8511G.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Universal Microelectronic T8511G, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Universal Microelectronic T8511G par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Universal Microelectronic T8511G.

Le manuel d’utilisation complet Universal Microelectronic, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Universal Microelectronic T8511G - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Universal Microelectronic T8511G, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lUniversal Microelectronic T8511G qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Universal Microelectronic T8511G - qui devraient nous aider dans les premières étapes lors de l'utilisation Universal Microelectronic T8511G
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Universal Microelectronic T8511G
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Universal Microelectronic T8511G dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Universal Microelectronic T8511G?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Universal Microelectronic T8511G, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Universal Microelectronic T8511G il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)