Français dropdown-ico

Manuel d’utilisation ATEN Technology CN8600

163 pages 2.56 mb
Télécharger

Aller à la page of 163

Summary
  • ATEN Technology CN8600 - page 1

    DVI KVM over IP CN8600 User Manual www.aten.com ...

  • ATEN Technology CN8600 - page 2

    CN8600 User Manual ii FCC Information This is an FCC Class A product. In a domestic environment this product may cause radio interference in which cas e the user may be required to tak e adequate measures. This equipment has been test ed and found to comply with the limit s for a Class A digital device, pursuant to Part 15 of the FCC Rules. These l ...

  • ATEN Technology CN8600 - page 3

    CN8600 User Manual iii User Information Online Registration Be sure to register your product at our online support center: T elephone Suppo rt For telephone support, call this number: User Notice All information, docum entation, and specifications contained in this manual are subject to change without prior no tification by the manufacturer. The ma ...

  • ATEN Technology CN8600 - page 4

    CN8600 User Manual iv Package Content s The CN8600 package consists of:  1 CN8600 DVI KVM over IP  1 Custom KVM Cable Set  1 USB 2.0 V irtual Media Cable  1 Power Adapter  1 Mounting Kit  1 User Instruction s* Check to make sure that all the comp onents are present and that nothing got damaged in shipping . If you encounter a prob ...

  • ATEN Technology CN8600 - page 5

    CN8600 User Manual v Content s FCC Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii User Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii Online Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i ...

  • ATEN Technology CN8600 - page 6

    CN8600 User Manual vi Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Upgrade Main Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Update Display Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Advanced Setting . . . . . . . . . . . . ...

  • ATEN Technology CN8600 - page 7

    CN8600 User Manual vii Hotkeys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 User Macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 System Macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 The Message Board . . . . . . . . ...

  • ATEN Technology CN8600 - page 8

    CN8600 User Manual viii The On-Screen Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 Mouse Pointer Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 Mouse DynaSync Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 Control Panel Configuration . . . . . . . . ...

  • ATEN Technology CN8600 - page 9

    CN8600 User Manual ix Link Local IPv6 Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 IPv6 Stateless Autoconfiguration . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 Port Forwarding. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 Keyboard Emulation . . . . . . . . ...

  • ATEN Technology CN8600 - page 10

    CN8600 User Manual x About this Manual This User Manual is provided to help you get the most from your system. It covers all aspects of installation, configuration and operatio n. An overview of the information found in the manu al is provided below. Chapter 1, Introduct ion, introduces you to the CN8600 system. It s purpose, features and benefits ...

  • ATEN Technology CN8600 - page 11

    CN8600 User Manual xi Conventions This manual uses the following conv entio ns: Product Information For informatio n about all ATEN products and how they can help you co nnect without limits, visit ATEN on the Web o r contact an ATEN Autho rized Reseller. Visit ATEN on th e Web for a list of locatio ns and telephone numbers: Monospaced Indicates te ...

  • ATEN Technology CN8600 - page 12

    CN8600 User Manual xii This Page Intentionally Left Blank ...

  • ATEN Technology CN8600 - page 13

    1 Chapter 1 Introduction Overview The CN8600 is a cost-effic ient over-IP devi ce th at provides secure KVM (keyboard, video and mouse) server management over an IP netw ork. It allows operators to monitor and access their computers at BI OS-level from remote locations using a web GUI, a browser-based Windows o r Java client, or a Windows or Java b ...

  • ATEN Technology CN8600 - page 14

    CN8600 User Manual 2 The CN8600 functions as a Virtu a l Remo te Desktop. A clien t so ftware for viewing remote consoles allows acces s to, and control of, the connected servers. Once an operator successfully connects and logs in, his screen disp lays what is running on the remote uni t attached to the CN8600 and he can control it from his console ...

  • ATEN Technology CN8600 - page 15

    Chapter 1. Introduction 3 Features and Benefit s The features and benefits p rovided by a CN8600 deployment are described i n the following table: Features Benefits Advanced Security  Advanced security features in clude password protection – whereby a valid username and password must be given before the client software will run – and advance ...

  • ATEN Technology CN8600 - page 16

    CN8600 User Manual 4 Redundant LAN using one IPMAC address Supports Network Interface Card (NIC) with backup function. Once the primary network connection fails, the CN8600 switches to another network connection automatically . This ensures connectivity and uptime. Mouse DynaSync No need t o re-sync your mouse – Mouse DynaSync provides automatic ...

  • ATEN Technology CN8600 - page 17

    Chapter 1. Introduction 5 System Requirement s Remote User Computers Remote user computers (also referred to as client computers) are the ones the users log into the switch with from remote locations ove r th e in t ernet. The following equipment must be instal led on th ese computers:  The computers used to access the switch have at least a P I ...

  • ATEN Technology CN8600 - page 18

    CN8600 User Manual 6 Cables  A custom USB KVM cable set to link the CN8600 to a server or KVM switch are provided with this package.  Custom KVM cable sets are available in various lengths, as shown in the table below: T o purchase additional cable sets, contact your d ealer .  One custom Console cable set to lin k the CN8600 to a local co ...

  • ATEN Technology CN8600 - page 19

    Chapter 1. Introduction 7 Vi deo Only the followi n g non-interlaced video signals are supported : Operating Systems  Supported operating system s for remote user computers that log into the CN8600 include Wi ndows 2000 and higher, and other systems capable of running Sun's Java Runtime Environm ent (JRE) 6, Update 3, or higher (Linux, Mac, ...

  • ATEN Technology CN8600 - page 20

    CN8600 User Manual 8 Browsers Supported browsers for users that log into the CN8600 in clude the following: * See Mac Systems , page 145, for further information regard ing Safari. Browser Ve r s i o n Internet Explorer 6 and higher Chrome 8.0 and higher Firefox Windows 3.5 and higher Linux 3.0 and higher Safari Windows 4.0 and higher Mac 3.1 and h ...

  • ATEN Technology CN8600 - page 21

    Chapter 1. Introduction 9 Component s Front View No. Component Description 1 Reset button Press the Reset button for more than three (3) seconds to revert to factory settings. 2 LAN 2 10/100/ 1000 LED Lights ORANGE to indicate that the CN8600 is transmitting at 10 Mbps on this port. Lights ORANGE + GREEN to indicate that the CN8600 is transmitting ...

  • ATEN Technology CN8600 - page 22

    CN8600 User Manual 10 Rear V i ew No. Component Description 1 Grounding T erminal The wire used to ground the unit connects here. 2 Control Port This port only connects to an optional control box that requires a separate purchase. 3 Local Console Port Connect the cable for the local console (USB keyboard, DVI monitor , USB mouse, microphone and spe ...

  • ATEN Technology CN8600 - page 23

    Chapter 1. Introduction 11 9 Virtual Media / Laptop USB Console (LUC) Switch Use this switch to select how the mini USB port operates, whether as a Virtual Media port or a Laptop USB Console port. 10 Virtual Media Port / Laptop USB Console (LUC) Port When the Virtual Media / Laptop USB Console (LUC) Switch is set to Virtual Media, use the USB 2.0 c ...

  • ATEN Technology CN8600 - page 24

    CN8600 User Manual 12 This Page Intentionally Left Blank ...

  • ATEN Technology CN8600 - page 25

    13 Chapter 2 Hardware Setup S t acking and Rack Mounting St acking The CN8600 can be placed on any approp riate level surface that can safely support its weight plus the weight of its attached cables. To place or stack the CN8600, remove the backing material from the bott om of the rubber feet that came with this package, an d stick them onto the s ...

  • ATEN Technology CN8600 - page 26

    CN8600 User Manual 14 Rack / W all Mounting The CN8600 can be installed in most standard 19" (1U) racks or mounted to a wall. To rack mount the unit or attach th e unit to the wall, do the following: 1. Use the screws supplied with your rack mounting kit to attach the mounting brackets to each side of the device: 2. If rack mounting, position ...

  • ATEN Technology CN8600 - page 27

    Chapter 2. Hardware Setup 15 Inst allation To install the CN8600, refer to the installation diagrams on th e following pages (the numbers correspond to the numbers of the steps), and do the following: 1. Plug your USB keyboard, mouse, DVI monitor, speakers and microphone into the local console port sect ion located on the CN8600 unit ’ s rear pan ...

  • ATEN Technology CN8600 - page 28

    CN8600 User Manual 16 Note: Dual power operation is optional – the second power source is for back-up; a second power adapter requires a separate purchase 1 1. Power on the CN860 0, then power on the server/KVM switch . Note: For safety reasons, we suggest you ground the switch using a grounding wire. 9 6 4 3 1 Over-IP PDU Over-IP devices Network ...

  • ATEN Technology CN8600 - page 29

    17 Chapter 3 Browser Login The CN8600 can be accessed eithe r from an Internet type br owser, or via the followin g methods:  W indows Client (see The Client Viewer , page 63);  Java Applet viewer (see The JavaClient Viewer , page 97);  W indows or Java application (AP) program (see AP Operation , page 91);  Laptop USB Console (LUC) por ...

  • ATEN Technology CN8600 - page 30

    CN8600 User Manual 18 (Continued from previous page.) 2. A Security Alert screen (or dialog box) appears. Accept the certificate – it can be trusted. (See Trusted Certificates , page 136, for details.) If a second certificate appears, accept it as well. Note: The Security Alert screen’ s appearance varies depending on the browser version. The C ...

  • ATEN Technology CN8600 - page 31

    Chapter 3. Browser Login 19 Main Screen After you h ave successfully logged in, the CN8600 Main screen appears: The Main screen consists of the user men u in the left panel, with a Viewer ico n (to launch the Java or WinClient Viewer) as well as a Logout icon displayed in the bottom of the menu. Note: If a user does not have p ermi ssion to perform ...

  • ATEN Technology CN8600 - page 32

    CN8600 User Manual 20 This Page Intentionally Left Blank ...

  • ATEN Technology CN8600 - page 33

    21 Chapter 4 Configuration Introduction The administration utiliti es, represented by the links and icons located at the left panel of the CN8600 web page, are used to configure the CN8600 ’s operating environment. This chapter discusses each of them in turn. Note: 1. As you make your configuration ch anges in each dialog box, click Save to apply ...

  • ATEN Technology CN8600 - page 34

    CN8600 User Manual 22 Basic Setting The following section s describe the screens under Basic Setting , which enable users to view or edit user information and device setti ngs, inclu din g sessions, firmware version, configuration backup /resto re and EDID. Click the User Management , Sessions and Maintenance links in the left panel menu to view th ...

  • ATEN Technology CN8600 - page 35

    Chapter 4. Configuration 23 Permissions Click to place/remove a check mark next to an item to grant/withhold access to that aspect of th e CN8600’s operation.  Win d ow s Cl i en t : Checking this allows a us er to access the CN8600 via the W indows Client softw are.  Config: Checking this allows the user to set up and modify the CN8600 &ap ...

  • ATEN Technology CN8600 - page 36

    CN8600 User Manual 24 Sessions The Sessions screen lets the administrator see at a glance all the users currently logged into the CN8600, and provides informat ion about each of th eir sessions. The meanings of the headings at the top of the page are fairly straightforward.  The IP heading refers to the IP add r ess that the user has logge d i n ...

  • ATEN Technology CN8600 - page 37

    Chapter 4. Configuration 25 Maintenance The Maintenance screen allow s the Administrator to upgrade the CN860 0’s firmware, view the m onitor’s ED ID, backup/restore the CN8600’s configuration settings and ping an IP address. Upgrade Main Fir mware As new versions of the CN8600 firmware become available, they can be downloaded from our websit ...

  • ATEN Technology CN8600 - page 38

    CN8600 User Manual 26 5. After the upload completes, a messag e appears on the sc reen to inform you that the operations succeeded. Click Logout at the bottom left of the Main web page. 6. In the screen that comes up click Ye s to confi rm that you w ant to exi t and reset the CN8600. Note: Y ou will need to wait a bit before logging back in. Up da ...

  • ATEN Technology CN8600 - page 39

    Chapter 4. Configuration 27 Backup / Rest ore The Backup / Restore screen gives you the ability to back up the CN86 00’s configuration and user profile inform ation. Backed up User Account and Configuration information can be restored with the Restore section. Information currently conf igured on the CN8600 will be replaced with the information t ...

  • ATEN Technology CN8600 - page 40

    CN8600 User Manual 28 (Continued from previous page.) 3. When the browser asks what you want to do with the file, select Save to disk ; then save it i n a convenient locat ion. Note: The CN8600 saves all its back up files as sysconfig.cfg . If y ou want to save more than one backup file, simply rename th e file to something convenient when yo u sav ...

  • ATEN Technology CN8600 - page 41

    Chapter 4. Configuration 29 Ping Host The Ping Host sectio n enables you to pin g an IP address. Enter the IP address/ Hostname then click Ping . ...

  • ATEN Technology CN8600 - page 42

    CN8600 User Manual 30 Advanced Setting The following section s describe the adm inistration utilities covered under Advanced Setting , in cludi ng the Device Information , Network , ANMS , Security, Cons ole Management , Date/Time, Customization screens. Device Information The Device Information screen provides inform atio n about the CN8600's ...

  • ATEN Technology CN8600 - page 43

    Chapter 4. Configuration 31 Network The Network screen is used to specify the CN8600's network environm ent. ...

  • ATEN Technology CN8600 - page 44

    CN8600 User Manual 32 IP Installer The IP Installer is an external Windows-b ased utility for assign ing IP addresses to the CN8600. C lick one of the radio button s to select Enabled, View Only, or Disabled for the IP Installer utili ty. See p. 12 9 for IP Installer details. Note: 1. If you select View Only , you will be able to see the CN8600 in ...

  • ATEN Technology CN8600 - page 45

    Chapter 4. Configuration 33 Redundant NI C A Redundant NIC ensures that the CN8600 is always online by swit ching to another network ad apter in case the primary connection fails.  Check Redundant NIC if you are using the secondary LAN port for a second IP address.  If you are using the secondary LAN por t for a second IP address, leave Redun ...

  • ATEN Technology CN8600 - page 46

    CN8600 User Manual 34 IPv6 Settings The CN8600 can either have its IPv6 address assigned dynami cally at boot up (DHCP), or it can be given a fixed IPv6 address.  For dynamic IP address assignment, select the Obtain an IPv6 address automatically , radio button. (This is the default setting .)  T o specify a fixed IP address, select the Set IP ...

  • ATEN Technology CN8600 - page 47

    Chapter 4. Configuration 35 ANMS The Advanced Network Management Settings screen allows you to set up login authentication and authorization ma nagement from external sources. It is divided into several sections, each of wh ich is described in the sections that follow. Event Destination This section lets you configu re the SMTP , log server, SNMP a ...

  • ATEN Technology CN8600 - page 48

    CN8600 User Manual 36 SMTP Settings To have the CN860 0 email reports from the SMTP server to yo u, do the following: 1. Check Enable report fr om the following SMTP server , and key in the IP address and service port of your SMTP server . 2. If you’re connecting to a secure server , check My server requires secur e connection (SSL) . 3. If your ...

  • ATEN Technology CN8600 - page 49

    Chapter 4. Configuration 37 Log Server Important transactions that occur on the CN860 0, such as logi ns and internal status messages, are kept in an automatically generated log file  Specify the MAC address of the computer that the Log Server runs on in the MAC address field.  Specify the port used by the computer that the Log Server runs on ...

  • ATEN Technology CN8600 - page 50

    CN8600 User Manual 38 Authentication The CN8600 allows log in auth enticat ion and authorization through external programs. This screen lets you configure the RADIUS, LDAP, and CC Management settings. If you want to use a RADIUS, LDAP , CC Authentication instead of the CN8600 device authen tication, check Disable Device Authentication . Selecting t ...

  • ATEN Technology CN8600 - page 51

    Chapter 4. Configuration 39 LDAP Settings To allow authentication a nd authorization via LDAP or LDAPS, the Active Directory’s LDAP Schema must be extended so that an extended attri but e name for the CN8600 – CN8600 -userProfile – is added as an optional attribute to the person class . In order to config ure the LDAP server, you will have to ...

  • ATEN Technology CN8600 - page 52

    CN8600 User Manual 40 The Permission Attribute V alue (for RADIUS and LDAP) The attribute value for per mission is made up of two parts: 1) the IP address of the CN8600 a user will access; and 2) a string that indicates the access rights the user has on the CN8600 at that IP address. For example: 192.168.0.80&c,w,j;192.168.0.188&v, l The ma ...

  • ATEN Technology CN8600 - page 53

    Chapter 4. Configuration 41 CC Management Settings To allow authorization for the CN8600 th rough a CC (Control Center) server, check Enable and fi ll in the CC Server’s IP addr ess and the port that it listens on in the appropriate fields. Note: Authentication refers to determining the authenticity of the person logging in; authorizati on refers ...

  • ATEN Technology CN8600 - page 54

    CN8600 User Manual 42  Timeout - Sets the amount of time (in minutes) that a remote com put er must wait before attempting to l ogin again after it has exceeded the number of allowed fail ures. The default is 3 minutes. Note: If you don’t enable Login Failures , users can attempt to log in an unlimited number of times with no restrictions. For ...

  • ATEN Technology CN8600 - page 55

    Chapter 4. Configuration 43 Adding Filters To add an IP filter , do the follow ing : 1. Click Add . Key in the IP address range you want to filter , and click OK : 2. Repeat these steps for any additiona l IP addresses you want to filter . To add a MAC filter , do the following : 1. Click Add . A dialog box similar to the one below appears: 2. Spec ...

  • ATEN Technology CN8600 - page 56

    CN8600 User Manual 44 Deleting Filters To delete a filter, select it in the IP Filter or MAC Filter list box and click Delete . The Filter section also lets administrators specify a Login String that users must include (in addition to the IP address) when they access the CN8600 with a browser. For example: 192.168.0.126/CN8600  The following cha ...

  • ATEN Technology CN8600 - page 57

    Chapter 4. Configuration 45 Account Policy Set the parameters for the username and passwo rd.  Minimum Username Length: Enter the minimum numb er (0 - 16) of characters required for a us ername (default is 6).  Minimum Password Length: Enter the minim um num ber (0 - 16) of characters required for a password (default i s 6).  Check whether ...

  • ATEN Technology CN8600 - page 58

    CN8600 User Manual 46 Mode Use this section to set the working m ode parameters.  Enable ICMP so that the CN8600 can be ping ed. If it is not enabled, the device cannot be pinged. The default is Enabled .  Enable Multiuser Operation to permit m ore th an one user to log into the CN8600 at the same time. The default is Enabled .  Enable V i ...

  • ATEN Technology CN8600 - page 59

    Chapter 4. Configuration 47 Private Certificate When logging in over a secure (SSL) connection, a signed certificate is used to verify that the user is logging in to th e intended site. For enhanced security, the Private Certificate section allows you to use your own privat e encryption key and signed certificate, rather th an the default ATEN cert ...

  • ATEN Technology CN8600 - page 60

    CN8600 User Manual 48 Importing the Private Certificate To import th e private cert ificate, do the following: 1. Cl ick Br owse to the right of Private Key ; browse to where your private encryption key file is located; and select it. 2. Cl ick Br owse to the right of Certificate ; browse to where your certificate file is located; and select it. 3. ...

  • ATEN Technology CN8600 - page 61

    Chapter 4. Configuration 49 3. After filling in the form (all fields are required), click Create . A self-signed certificate based on the information you just provided is now stored on the CN8600. 4. Click Get CSR , and save the certificate file ( csr.cer ) to a convenient location on y our computer This is the file that y ou give to the third p ar ...

  • ATEN Technology CN8600 - page 62

    CN8600 User Manual 50 Console Management This section discusses metho ds of opening the CN8600 console via OOBC or serial connection. OOBC In case the CN8600 cannot be accessed wi th the usual LAN-ba sed methods, it can be accessed via the switch’s mode m port. To enable support for PPP (modem) operation, click to put a checkmark in the Enable Ou ...

  • ATEN Technology CN8600 - page 63

    Chapter 4. Configuration 51 Dial Out For the dial out function, you must establish an account with an Internet Service Provider, and use a modem to dial up to your ISP account. An explanation of the Enable Dial Ou t item s is giv en in the table below:  ISP Settings : Specify the telephone number , account name (username), and password that you ...

  • ATEN Technology CN8600 - page 64

    CN8600 User Manual 52  PPP online time specifies how long you want the ISP connect ion to last before terminating the session and hang ing up the modem. A setting of zero means it is always on line.  Emergency Dia l Out: If the CN8600 get s disconnected from the network, or the network goes down, this function puts the switch on line via the ...

  • ATEN Technology CN8600 - page 65

    Chapter 4. Configuration 53 Serial Console To configure the CN8600 to interact with the connected seri al device, you need to set its parameters to match the param eters of the device in the Port Property Settings . Select the value s that match the ones us ed by the connected serial console device. The port p roperty settings that the CN8600 suppo ...

  • ATEN Technology CN8600 - page 66

    CN8600 User Manual 54 Note: None is only supported for baud rates of 9600 and lower . For baud rates greater than 9600, you must choose Hardware or XON/XOFF .  Port Alert Properties : Y ou can specify up to 10 types of events (e.g., Power On). Enter them in the provided Alert String (1 - 10) fields. When you have finished making your selection s ...

  • ATEN Technology CN8600 - page 67

    Chapter 4. Configuration 55 Date / Time  Select the month from the dropdown listbox .  Click < or > to move backwar d or forw ard by one year increments.  In the calendar , click on the day .  T o set the time, key in the numbers using the 24 hour HH:MM:SS format.  Click Set to save your sett ings. Network Ti me To have the tim ...

  • ATEN Technology CN8600 - page 68

    CN8600 User Manual 56 Customization Use this section to edit the device setting s.  If For ce All to Grayscale is enabled, the remote displays of all devices connected to the CN860 0 are changed to grayscale. This can speed up I/O transfer in low bandwidth situat ion s.  If Enable Client AP Device List is enabled, the switch appears in the Se ...

  • ATEN Technology CN8600 - page 69

    Chapter 4. Configuration 57  Multiuser Mode: Defines how a port is to be accessed when multiple users have logged on, as follows:  Exclusive : The first user to switch to th e port has exclusive control over the port. No other us ers can view the port.  Occupy : The first user to switch to the port has control over th e po rt. However , ad ...

  • ATEN Technology CN8600 - page 70

    CN8600 User Manual 58 Preferences The following section s describe the adm inistration utilities covered on thi s section, including the User Preferences , Log , Remote Console and Downlo ad screens. You can find the links to th ese screens under Preferences in the left panel menu. User Preferences The User Preferences screen allows the user to set ...

  • ATEN Technology CN8600 - page 71

    Chapter 4. Configuration 59 Password Change your password using the following fields:  Old Password: Key in the old passwor d.  New Password: Key in the new password.  Confirm Password: Key in the exact same characters to verify you have entered the correct new password Click Change Password to apply your settings . Logs The CN8600 logs al ...

  • ATEN Technology CN8600 - page 72

    CN8600 User Manual 60 Remote Console The preview in this screen shows a snapsh ot of the server’s display, as follows: Clicking Refresh updates the snapsh ot of the remote display.  Select the Exit Macr o you would like to use and click Save .  T o configure the PN0108 (a Power Over the NET™ device), click Open Power Management. When conn ...

  • ATEN Technology CN8600 - page 73

    Chapter 4. Configuration 61 Download The Download page lets you download the standalone Windows Cl ient AP , Java client AP and Log Server AP . 1. Click the button of the AP you want to download. 2. Follow the on-screen instructions to complet e the installation and have the program icon placed on your desktop.  For more information on the W i n ...

  • ATEN Technology CN8600 - page 74

    CN8600 User Manual 62 This Page Intentionally Left Blank ...

  • ATEN Technology CN8600 - page 75

    63 Chapter 5 The Client V iewer S t arting Up The Client Viewer is available when you log into the CN8600 web GUI using a browser. After you log in (see Logging In , page 17), click th e Viewer icon in the left panel menu. A second or two afte r, the remote server’s display appears as a window on your desktop : By default, the WinClient version o ...

  • ATEN Technology CN8600 - page 76

    CN8600 User Manual 64 Navigation You can work o n the remote system via the screen display on y our monitor just as if it were your local system.  Y ou can maxi mize the window , drag th e borders to resize the window; or use the scrollbars to m ove around the screen.  Y ou can switch between your local and remote pro grams with [Alt + T ab]. ...

  • ATEN Technology CN8600 - page 77

    Chapter 5. The Client Viewer 65  By default, the left of th e top text row show s the video resolution of the remote display. As the mouse pointer moves over the icons in the icon bar, however , the information in the top text row changes to describe the icon's function. In addition, if a message from another user is entered in the message ...

  • ATEN Technology CN8600 - page 78

    CN8600 User Manual 66 Control Panel Functions The Control Panel functio ns are described in the table below. Note: Clicking the T button at the top right of the dialog boxes that ap pear for the control panel functions brings up a slider to adjust the transparency of the dialog box. After making your adju stment, click anywhere in the dialog box to ...

  • ATEN Technology CN8600 - page 79

    Chapter 5. The Client Viewer 67 Click to toggle the remote display between color and grayscale. Click to bring up the Virtual Media dialog box. The icon changes when a virtual media device is started on the port. See Virtual Media , page 82, for specific details. Note: This icon displays in gray when the function is disabled or not available to the ...

  • ATEN Technology CN8600 - page 80

    CN8600 User Manual 68 Macros The Macros icon pro vides access to three funct ions found in the Macros dial og box: Hotkeys, User Macros, and System Macros. Each of these functions is described in the follow ing sections. Hotkeys Various actions, corresponding to clicking th e Control Panel icons, can be accomplished directly from the keyboard with ...

  • ATEN Technology CN8600 - page 81

    Chapter 5. The Client Viewer 69 If you find the default Hotkey combinatio ns inconvenient, you can reconfigure them as follows: 1. Highlight an Action , then click Set H otkey . 2. Press your selected Function keys (one at a time). The key names appear in the Hotkeys field as you press them.  Y ou can use the same function keys for more than one ...

  • ATEN Technology CN8600 - page 82

    CN8600 User Manual 70 User Macros User Macros are used to perform speci fic actions on the remote server. To create the macro, do the following: 1. Se lec t the User Macros radio button, then click Add . Substitute Ctrl key If your local computer captures Ctrl key combinations, preventing them from being sent to the remote system, you can implement ...

  • ATEN Technology CN8600 - page 83

    Chapter 5. The Client Viewer 71 2. In the dialog box that comes up, replace the “New Macro” text with a name of your choice for the macro: 3. Click Record . The dialog box disappears, and a small panel appears at the top left of the screen: 4. Press the keys for the macro.  T o pause macro record ing, click Pause . T o resume, click Pause ag ...

  • ATEN Technology CN8600 - page 84

    CN8600 User Manual 72  Clicking Cancel cancels all keystrokes.  When you have finished, click St o p . This is the equivalent of clicking Done in Step 5. Note: 1. Case is not considered – typing A or a has the same effect. 2. When recording the macro the focus must be on the remote screen. It cannot be in the macro dialog box. 3. Only the d ...

  • ATEN Technology CN8600 - page 85

    Chapter 5. The Client Viewer 73 If you run the macro from this dialog box, you have the option of specifying how the macro runs.  If you choose Pla y Without Wait , the macro runs the keypresses one after another with no time delay between them.  If you choose Pla y With Time Control , the macro waits for the amount of time between key presse ...

  • ATEN Technology CN8600 - page 86

    CN8600 User Manual 74 3. By opening this dialog box and clicking Play . Note: User Macros are stored on the Lo cal Client computer of each user . Therefore there is no l imitation on the of number of macros, the size of the macro names, or makeup of the ho tkey com binations that invoke them. Search , at the bottom of the dialog box, lets you filte ...

  • ATEN Technology CN8600 - page 87

    Chapter 5. The Client Viewer 75 2. In the dialog box that comes up, replace the “New Macro” text with a name of your choice for the macro: 3. Click Record . The dialog box disappears, and a small panel appears at the top left of the screen: 4. Press the keys for the macro.  T o pause macro record ing, click Pause . T o resume, click Pause ag ...

  • ATEN Technology CN8600 - page 88

    CN8600 User Manual 76 4. If you haven’t brought up the Show dialog, click Done when you have finished recording your macro. Y o u return to the Macros dialog box with your system macro key presses disp layed in the Macro column: 5. If you want to change any of the keystrokes, select the macro and click Edit . This brings up a dialog box similar t ...

  • ATEN Technology CN8600 - page 89

    Chapter 5. The Client Viewer 77 Video Set tings The Video Settings dialo g box allows you to adjust the placement an d picture quality of the remote screen display on your monitor. The adjustment op tio ns are as follows: Option Usage Click this to control the transp arency of the Video Settings dialog box. Performance Select the type of internet c ...

  • ATEN Technology CN8600 - page 90

    CN8600 User Manual 78 Gamma Adjustment If it is necessary to correct the gamma level for the remote video display, use the Gamma function of th e Video Ad justment dialog box. Under Basic configuration, there are ten preset and four user-defined levels to choose from. Drop down the list box and choo se th e most suit able one. For greater control, ...

  • ATEN Technology CN8600 - page 91

    Chapter 5. The Client Viewer 79 Click OK to save your changes an d close the dialog box . Click Cancel to abandon your changes and close the dialog box. Note: For best results, change the gamma while viewing a remote computer . Video Quality Drag the slider bar to adjus t the over all video quality . The lar ger the value, the clearer the picture a ...

  • ATEN Technology CN8600 - page 92

    CN8600 User Manual 80 The Message Boa rd To alleviate the possibi lity of access conflicts re sulting from multiple user logins, the CN8600 provides a message board that allows users to communicate with each other: The Button Bar The buttons on the Button Bar are toggles. Their actions are described in the table below: Button Action Enable/Disable ...

  • ATEN Technology CN8600 - page 93

    Chapter 5. The Client Viewer 81 Message Display Panel Messages that users post to the board - as well as system messages - display in this panel. If you disable Chat, however, messages that get post ed to the board won't appear. Compose Panel Key in the messages that you want to post to the board in thi s pane l. Click Send , or press [ Enter ...

  • ATEN Technology CN8600 - page 94

    CN8600 User Manual 82 Vi r t u a l M ed i a The Virtual Media feature allows a drive, folder, image file, or removable disk on a local client comput er to appear and act as if it were installed on the remote server. Virtual Media also supports a smart card reader function that allows a read er plugged into a local clie nt computer to appear as if i ...

  • ATEN Technology CN8600 - page 95

    Chapter 5. The Client Viewer 83 2. Click Add ; then select the media source. Depending on your selection , additional dialo g boxes appear enabling you to select the drive, file, folder , or removable disk you desire. See Virtual Media Support , page 148 for details about mounting these media ty pes. 3. T o add addi tional media sources, click Add ...

  • ATEN Technology CN8600 - page 96

    CN8600 User Manual 84 5. T o rem ove an entry from the list, high lig ht it and click Remove . 6. After you have made your media source selecti ons, click Mount . The dialog box closes. The virtual me dia de vi ces th at you ha ve selected are redirected to the remote system, wher e they show up as drives, files and folders on the remote system’ ...

  • ATEN Technology CN8600 - page 97

    Chapter 5. The Client Viewer 85 Smart Card Reader Note: This feature is only available when using the W inClient V iewer or the W indows C lient AP . The smart card reader function allows a reader pl ugged into a local client computer’s USB port to be redirected, a nd appear as if it were plugged into the remote server. One purpose of smar t card ...

  • ATEN Technology CN8600 - page 98

    CN8600 User Manual 86 The On-Screen Keyboard The CN8600 supports an on-screen keyboard, availabl e in multiple languages, with all the standard keys for each supported language. Click this icon to pop up th e on -screen keyboard: One of the major advantages of the on-sc reen keyboard is that if the keyboard languages of the remote and local sy stem ...

  • ATEN Technology CN8600 - page 99

    Chapter 5. The Client Viewer 87 To display/hide th e expanded keyboard keys, click the arrow to t he right of the language list arrow. Mouse Pointer T ype The CN8600 offers a number of mouse point er options when working in the remote display. Click this icon to select the type that you wo uld like to work with: Note: The icon on the Control Panel ...

  • ATEN Technology CN8600 - page 100

    CN8600 User Manual 88 Automatic Mouse Synchronization (DynaSy nc) Mouse DynaSync provides automatic locked-in synching of the remote and local mouse pointers – eliminating the need to constantly resync the two movements. T he icon on the toolbar indicates the sync hroni za tion mode status as follows: When Mouse DynaSync is available, clicking th ...

  • ATEN Technology CN8600 - page 101

    Chapter 5. The Client Viewer 89 Control Panel Configura tion Clicking the Control Panel icon brings up a dialog box that allows you to configure the items that appear on the Control Panel, as well as its graphical settings: The dialog box is organized into five main sect ions as described in the table, below: Item Description Customize Control Pane ...

  • ATEN Technology CN8600 - page 102

    CN8600 User Manual 90 Item Description Screen Options  If Full Screen Mode is enabled, the remote display fills the entire screen.  If Full Screen Mode is not enabled, the remote display appears as a window on the client desktop. If the remote screen is large r than what is able to fit in the window, scrollbars will appear .  If Keep Scree ...

  • ATEN Technology CN8600 - page 103

    91 Chapter 6 AP Operation Introduction In addition to the browser based client viewers, the CN86 00 also provi des stand-alone Windows an d Java application s that can be used w ithout a browser. The applications can be found on the CN8600 soft ware CD. Download the Windows Client AP and the Java Clie nt AP from the web GUI. Refer to Download , pag ...

  • ATEN Technology CN8600 - page 104

    CN8600 User Manual 92 The Windows Client Con nection Screen A description of the Connectio n Screen is given in the fol low ing tab le: Item Description Server List Each time the CN8600 Windows Client program is run, it searches the user's local LA N segment for CN860 0 units, and lists whichever ones it finds in this box. If you want to conne ...

  • ATEN Technology CN8600 - page 105

    Chapter 6. AP Operation 93 Logging In Once the CN8600 connects to the unit you specified, a login window appears: Provide a valid Username and Password, th en Click OK to continue. Note: The default Username is administrator ; th e de faul t Password is passwor d . For security , we stro ngly reco mmend that yo u ch ange these to something unique ( ...

  • ATEN Technology CN8600 - page 106

    CN8600 User Manual 94 The Administrator Utility The Administrato r Utility ap pears as a tabbed notebook. Each tab represents a different administrati ve function . A descri ption of the functions and how to configure their settings is provided in the sections that follow. The Settings notebook opens with the Port Access p age displ ayed. This page ...

  • ATEN Technology CN8600 - page 107

    Chapter 6. AP Operation 95 The Java Client AP The Java Client AP is provided to make the CN8600 accessible to all platforms. Systems that have JRE 6 Up date 3 or higher installed can connect. If you don't already have Java, it is available for free download from Sun's Java web site (http://java.sun.com). St arting Up To connect to the CN8 ...

  • ATEN Technology CN8600 - page 108

    CN8600 User Manual 96 Logging In Once the CN8600 connects to the unit you specified , a login window appears: Provide a valid Username and Password, then Click OK . Note: The default Username is administrator ; the default Password is passwor d . For security , we strongly r ecommend that you change these to something unique (see Logs , page 59, fo ...

  • ATEN Technology CN8600 - page 109

    97 Chapter 7 The JavaClient V iewer Introduction The JavaClient Viewer makes the CN8600 accessible to all platforms that have the Java Runtime Environment (JRE) installed. (See System Requirements , page 5, for the required JRE version.) The JRE is available for free download from the Java web sit e (http://java.com). To run the JavaClient Viewer, ...

  • ATEN Technology CN8600 - page 110

    CN8600 User Manual 98 A second or two after you click the Open Java Applet (or Open Viewer ) link, the remote server’s display appears as a window on your deskto p: Navigation You can work o n the remote system via the screen display on y our monitor just as if it were your local system.  Y ou can maxi mize the window , drag th e borders to re ...

  • ATEN Technology CN8600 - page 111

    Chapter 7. The JavaClient Viewer 99 The JavaClient Control Panel The JavaClient control panel is hidden at the top center of the screen. It becomes visible when you move the mouse pointer into th at area: Note: 1. The above image shows the complete Control Panel. The icons that appear can be customized. See Control Pa nel Configuration , page 107, ...

  • ATEN Technology CN8600 - page 112

    CN8600 User Manual 100 Control Panel Functions The Control Panel functi ons are descri bed in Control Panel Functions , page 66. Macros The Macros icon provides access to three fun ctions found in the Macros dialog box: Hotkeys, User Macros, and System Macros. Each of these functions is described in the following section s. Hotkeys Various actions ...

  • ATEN Technology CN8600 - page 113

    Chapter 7. The JavaClient Viewer 101 User Macros User Macros are used to perform speci fic actions on the remote server. To create the macro, do the following: 1. Select the User Macros radio button, then click Add . User Macro operation is the same under the JavaClient as it is under the WinClient. See User Macros , page 70 for details. System Mac ...

  • ATEN Technology CN8600 - page 114

    CN8600 User Manual 102 Search allows you to find previou sly created macros and have them listed in the large upper panel for you to play or edit. The Search operation is the same under the JavaClient as it is under the WinClient. See p. 74 for detai ls. Vi deo Settings The Video settings dialog box allows you to adjust the placement and picture qu ...

  • ATEN Technology CN8600 - page 115

    Chapter 7. The JavaClient Viewer 103 Message Board The CN8600 supports multiple user logins, which can possibly give rise to access conflicts. To alleviate this problem, a message board feature, similar to an internet chat program, allows user s to communicate with each other: The buttons on the Button Bar are toggles. Their actions are described i ...

  • ATEN Technology CN8600 - page 116

    CN8600 User Manual 104  The names of all the logged in users appear in the User List panel.  Select the users that you want to post to before sending your message. Users that are not selected will no t see th e message.  T o Hide/Unhide the User List panel, click on th e arrows in the panel separator .  If a user has disabled Chat, the ...

  • ATEN Technology CN8600 - page 117

    Chapter 7. The JavaClient Viewer 105 Vir t u a l M e di a The Virtu al Media feature allows a folder or image file on a local client computer to appear and act as if it were installed on the remote server. Virtual Media also supports a smart card reader function that allows a reader plugged into a local client computer to appear as if it were plugg ...

  • ATEN Technology CN8600 - page 118

    CN8600 User Manual 106 The On-Screen Keyboard The CN8600 supports an on-scree n ke ybo ard, available in multiple languages, with all the standard keys for each supported language. Click this icon to pop up th e on -screen keyboard: On-Screen Keyboard operatio n is the same un der the JavaClient as it is under the WinClient. See The On-Screen Keybo ...

  • ATEN Technology CN8600 - page 119

    Chapter 7. The JavaClient Viewer 107 Mouse DynaSync Mode Clicking this icon selects whether synchroni zatio n of the local and remote mouse pointers is accompli shed either au tomatically or manually. DynaSync operation is the same under the JavaClient as it is under the WinClient. See Mouse DynaSync Mode , page 87 for details. Control Panel Config ...

  • ATEN Technology CN8600 - page 120

    CN8600 User Manual 108 This Page Intentionally Left Blank ...

  • ATEN Technology CN8600 - page 121

    109 Chapter 8 Local Console The CN8600 can be accessed directly fr om a local console’s keyboard/mouse/ monitor or via a laptop applicati on (AP) program at the local site. Console Lock Switch The switch on the CN8600 rear panel lets you select how the mi ni USB port operates. Set the switch to LUC to use the mini USB port as a Laptop USB Co nsol ...

  • ATEN Technology CN8600 - page 122

    CN8600 User Manual 110 Laptop USB Console To use the mini USB port for Laptop USB Console (LUC) op erations, se t the switch at the rear panel of the CN8600 to LUC . Note: The LUC function only works for W indows systems. The laptop application (AP) program for operating the LUC is built into the CN8600’s firmware and does not requi re a download ...

  • ATEN Technology CN8600 - page 123

    Chapter 8. Local Console 111 Laptop USB Console Main Page After connecting a laptop to the CN8600’ s Lap top port, logging in, and openin g the AP , the Laptop Console main page appears. The Laptop Consol e Main Page is simil ar to the Web Browser , WinClient and Java Client Main Pages. See AP Operation , page 91 , for further detai ls, and refer ...

  • ATEN Technology CN8600 - page 124

    CN8600 User Manual 112 This Page Intentionally Left Blank ...

  • ATEN Technology CN8600 - page 125

    113 Chapter 9 The Log File The Log File Screen The CN8600 logs all the even ts that take place on it. Following a reset, it writes them to a log file, which is a searchable database. To view the contents of the log file, click the Log icon at the center left of the page. A screen similar to the one below appears: A maximum of 512 events are kept in ...

  • ATEN Technology CN8600 - page 126

    CN8600 User Manual 114 This Page Intentionally Left Blank ...

  • ATEN Technology CN8600 - page 127

    115 Chapter 10 The Log Server The Log Server is a Windows-based administrative utilit y that records all the events that take place on selected CN8600 units and writes them to a searchable database. This chapter describes how to install and configure the Log Server. Inst allation 1. In the web GUI, go to the Download page. Refer to Download , page ...

  • ATEN Technology CN8600 - page 128

    CN8600 User Manual 116 Note: 1. The MAC address of the Log Server computer must be specified in the ANMS settings – see Log Server , page 37 for details. 2. The Log Server requires the Microsoft Jet OLE DB 4.0 driver . See The Log Server , page 145 if the program does not start. The screen is divided into three components:  A Menu Bar at the t ...

  • ATEN Technology CN8600 - page 129

    Chapter 10. The Log Server 117 Configure The Configure menu contains three items: Add, Edit, and Delete. They are used to add new CN8600 units to the CN86 00 List, edit the in formation for units already on the list, or delete CN8600 un its from the list.  T o add a CN8600 to the CN8600 Li st , click Add .  T o edit or delete a listed CN8600, ...

  • ATEN Technology CN8600 - page 130

    CN8600 User Manual 118 Event s The Events Menu h as two items: Search and Maintenance . Search Search allows you to search for events co ntaining specific words or strings. When you access this function, a screen similar to the one below appears: A description of the item s is given in the table below: Item Explanation New search This is one of thr ...

  • ATEN Technology CN8600 - page 131

    Chapter 10. The Log Server 119 Maintena nce This function allow s the administrator to p erform manual mai ntenance of the database, such as erasing specified reco rds before the expiration tim e that was set with the Limit setting of the Edit function (see page 117). Options Network Retry allows you to set the number of seconds that the Log Server ...

  • ATEN Technology CN8600 - page 132

    CN8600 User Manual 120 Help From the Help Menu, click Contents to access the online Windows Help file. The help file contains instru ctions about how to setup, operation and troubleshoot the Log Server. The Log Server Main Screen Overview The Log Server Main Screen is divided into two main pane ls.  The upper (List) panel lists the CN8600 units ...

  • ATEN Technology CN8600 - page 133

    Chapter 10. The Log Server 121 The List Panel The List panel contains six fiel ds: The Tic k Panel The lower panel displ ays tick informat ion for the currently selected CN8600. Note that if the installation contains more than one switch, even though a switch is not currently selected, if its Recording checkbox is checked, the Log Server records it ...

  • ATEN Technology CN8600 - page 134

    CN8600 User Manual 122 This Page Intentionally Left Blank ...

  • ATEN Technology CN8600 - page 135

    123 Appendix Safety Instructions General  Read all of these instructions. Save them for future reference.  Follow all warnings and instructions marked on the dev ice.  Do not place the device on any unstable su rf ace (cart, stand, table, etc.). If the device falls, serious damage wi ll resul t.  Do not use the device near water .  D ...

  • ATEN Technology CN8600 - page 136

    CN8600 User Manual 124 extension cord ampere rating. Mak e sure that the total of al l products plugged into the wall outlet does not exceed 15 amperes.  T o help protect y our system from sudden, transient increases and decreases in electrical power , use a su rge suppressor , line conditioner , or un-interruptible power supply (U PS).  Posi ...

  • ATEN Technology CN8600 - page 137

    Appendix 125 Rack Mounting  Before working on the rack, ma ke su re that the stabilizer s are secured to the rack, extended to the floor , and that the full w eight of the rack rests on the floor . Install front and side stabilizers on a single rack or front stabilizers for joined multiple ra cks before work ing on the rack.  Always load the ...

  • ATEN Technology CN8600 - page 138

    CN8600 User Manual 126 T echnical Support International  For online technical support – includ ing troubleshooting, documentati on, and software updates: http://eservice.aten.com  For telephone support, see Telephone Suppo rt , page iii. North America When you contact u s, please have the followin g information ready beforehand:  Product ...

  • ATEN Technology CN8600 - page 139

    Appendix 127 IP Address Determination If you are an administrato r logging in for the first time, you need to access the CN8600 in order to g ive it an IP addr ess that users can co nnect to. There are several methods to choose from. In each case, your computer must be on the same network segm ent as the CN8600. A fter you have co nnected and logge ...

  • ATEN Technology CN8600 - page 140

    CN8600 User Manual 128 3. In the screen that appears, press F1 to set the IP address. Proceed to step 4. Press F2 to enable the CN8600 to aut henti cate users. The CN8600 all ows authentication and authori zation through external pr ograms. If the external programs fail to authenticate and you canno t log on to the device, use the local console to ...

  • ATEN Technology CN8600 - page 141

    Appendix 129 5. From the list, select DHCP: Enable and hit the space bar to toggle enabling or disabling the DHCP server . It shoul d change to DHCP: Disable with additional fields, as follows : 6. For the fields Fixed IP , Subnet Mask , and Default Gateway , select each choice and enter the numerical ad dress (dotted quad ad dress). 7. Go to Save ...

  • ATEN Technology CN8600 - page 142

    CN8600 User Manual 130 2. Select the CN8600 in the Device List . Note: 1. If the list is empty, or your device doesn't appear, click Enumerate to refresh the Device List. 2. If there is more than one devi ce in the list, use the MAC address to pick the one you want. The CN 8600's MAC address is located on its bottom panel. 3. Select eithe ...

  • ATEN Technology CN8600 - page 143

    Appendix 131 3. Assign a fixed IP address for the CN8600 that is suitable for the network segment that it resides on. 4. After you log out, reset your computer 's IP address to its original value. AP Windows Client For computers running Windows, th e CN8 600's IP address can be determined with the W indows AP program (see The Windows Clie ...

  • ATEN Technology CN8600 - page 144

    CN8600 User Manual 132 IPv6 At present, the CN8600 supports two IPv6 address protocols: Link Local IPv6 Address , and IPv6 Stateless Autoconfiguration Link Local IPv6 Address At power on, the CN8 600 is automatically co nfigured with a Link Local IPv6 Address (for exampl e, fe8 0::210:74ff:fe61:1ef). To find out what the Li nk Local IPv6 Add ress i ...

  • ATEN Technology CN8600 - page 145

    Appendix 133 IPv6 St ateless Autoconfiguration If the CN8600’s network environm ent cont ains a device (such as a router) that supports the IPv6 Stateless Autoconfigu ration function, the CN8600 can obtain its prefix information from that device in order to generat e its IPv6 address. For example, 2001: : 7 4ff:fe6e:5 9. As above, the address is ...

  • ATEN Technology CN8600 - page 146

    CN8600 User Manual 134 Port Forwarding For devices located behind a router, port forwardi ng all ows the router to pass data coming in over a specific port to a specific device. By setting the port forwarding parameters, you tell the router wh ich device to send the data coming in over a particular port to. For example, if the CN8600 connected to a ...

  • ATEN Technology CN8600 - page 147

    Appendix 135 Keyboard Emulation The PC compatible (101/104 key) keyboard can emu late the functions of the Sun and Mac keyboards. The emulatio n mappings are listed in the table bel ow. Note: When using key combinations, press and release the first key (Ctrl), then press and release the activation key . PC Keyboard Sun Keyboard PC Keyboard Mac Keyb ...

  • ATEN Technology CN8600 - page 148

    CN8600 User Manual 136 T rusted Certificates Overview When you t ry to log in to the device from your bro wser, a Security Alert message appears to inform you that the device’s certifi cate is not trusted, and asks if you want to proceed. The certificate can be trusted, but the alert is triggered because the certificate’s name is not found on M ...

  • ATEN Technology CN8600 - page 149

    Appendix 137 Inst alling the Certificate To install the ce rt if i cate, do the following: 3. In the Security Alert dialog box, click Vi ew Certificate. The Certificate Information dialog box app ears: Note: There is a red and white X logo over the certificate to indicate that it is not trusted. 4. Click Inst all Certific ate. 5. Follow the Install ...

  • ATEN Technology CN8600 - page 150

    CN8600 User Manual 138 7. Ne xt, clic k Finish to complete the installation; then click OK to close the dialog box. Certificate T rusted The certificate is now trusted: When you click View Certificat e , you can see that the red and white X logo is no longer present – further indica tion that the certificate is trusted: ...

  • ATEN Technology CN8600 - page 151

    Appendix 139 Mismatch C onsiderations If the site name or IP address used for generati ng the certificate no lo nger matches the current address of the CN8600 a mismatch warning occurs: You can click Ye s to go on, or you can disabl e mismatch checking. To disable mismatch check ing, do the fol lowi ng: 1. After the page you are logging in to comes ...

  • ATEN Technology CN8600 - page 152

    CN8600 User Manual 140 Self-Signed Private Certificates If you wish to create your own self-sig ned encryption key and certificate, a free utility – op enssl.exe – is availa ble for do wnlo ad over the web at www .openssl.org . To create your private key and certificate d o the following: 1. Go to the direct ory where you downloaded and extract ...

  • ATEN Technology CN8600 - page 153

    Appendix 141 T roubleshooting General Operation Problem Resolution Erratic operation The CN8600 needs to be started before the KVM switch 1. If the CN8600 is connected to a KVM switch, make sure to power it on before powering on th e switch. 2. If the KVM switch was started before the CN8600, reset or restart the KVM switch. The CN8600 needs to be ...

  • ATEN Technology CN8600 - page 154

    CN8600 User Manual 142 Windows Problem Resolution When I log in, the browser generates a CA Root certificate is not trusted , or a Certificate Error response. 1. The certificate’ s name is not found on Microsoft’s list of T rusted Authorities. The certificate can be trusted . See Trusted Certificates , page 136, for details. 2. Y ou can elimina ...

  • ATEN Technology CN8600 - page 155

    Appendix 143 Java For mouse synchronization pro blems, see Macros , page 100, Mouse DynaSync Mode , page 107, and Sun / Linux , page 147. For other problems, see the table below: Problem Resolution Java Applet won't connect to the CN8600 1. Java 6 Update 3 or higher must be installed on your computer . 2. Make sure to include the correct login ...

  • ATEN Technology CN8600 - page 156

    CN8600 User Manual 144 Sun Systems * These solutions work for most comm on Sun VGA cards. If using them fails to resolve the problem , consult the Sun VGA card's manual. Problem Resolution Video display problems with HDB15 interface systems (e.g., Sun Blade 1000 servers). 1 The display resolution should be set to 1024 x 768: Under T ext Mo de: ...

  • ATEN Technology CN8600 - page 157

    Appendix 145 Mac Systems The Log Server Problem Resolution The local and remote mouse pointers do not sync. There are two USB I/O settings for the Mac: Mac 1, and Mac 2 (see Customization , page 56). In genera l, Mac 1 works with older operating system versions, wher eas Mac 2 works with the newer ones. In some cases, however , the r everse is true ...

  • ATEN Technology CN8600 - page 158

    CN8600 User Manual 146 Additional Mouse Synchr onization Procedures If the mouse synchronization procedures m enti oned in the manual fail to resolve mouse pointer problems for particular com put ers, try the follo wing: Windows: Note: In order for the local and rem ote mi ce to synchronize, you must use the generic mouse driver supplied with the M ...

  • ATEN Technology CN8600 - page 159

    Appendix 147 b) Click the Pointer Optio ns tab c) Set the mouse speed to the middle positio n (6 units in from the left) d) Disable Enhance Pointer Precision 3. W indows ME: Set the mouse speed to the middle position; disable mouse acceleration (click Advanced to get the dialog box for this). 4. W indows NT / Windows 98 / W indow s 95: Set the mous ...

  • ATEN Technology CN8600 - page 160

    CN8600 User Manual 148 Virtual Media Support WinClient ActiveX V iewer / Wi nClient AP  IDE CDROM/DVD-ROM Dr ives – Read Only  IDE Hard Drives – Read Only  USB CDROM/DVD-ROM Drives – Read Only  USB Hard Drives – Read/W rite*  USB Flash Drives – Read/W rite*  USB Floppy Drives – Read/W rite * These drives can be mounted ...

  • ATEN Technology CN8600 - page 161

    Appendix 149 Administrator Login Failure If you are unable to perform an Admini strator login (because the Username and Password information has become corrupted, or you have forgotte n it, for example), there is a procedure you can use to clear the login i nformation. To clear the login information do the fol lowing: 1. Power of f the CN8600, disc ...

  • ATEN Technology CN8600 - page 162

    CN8600 User Manual 150 Specifications Function Specificat ion Connectors Console Ports KB 1 x USB Type A Female (White) Video 1 x DVI-D Female (White) Mouse 1 x USB Type A Female (White) Audio S peaker 1 x Mini Stereo Jack Female (Green) Microphone 1 x Mini S tereo Jack Female (Pink) KVM Ports KB/Mouse 1 x USB T ype B Female (White) Video 1 x DVI-D ...

  • ATEN Technology CN8600 - page 163

    Appendix 151 Limited W arranty ATEN warrants this product against defec ts in mate rial or workmanship fo r a period of one (1) year from the date of purchase. If this prod uct prov es to be defective, contact ATEN's support department for repa ir or replacement of your un it. AT EN will not issue a refund. Return requests can not be processed ...

Fabricant ATEN Technology Catégorie Network Router

Les documents que nous recevons du fabricant de l'appareilATEN Technology CN8600 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques ATEN Technology
- manuels d’utilisations CN8600
- fiches produit ATEN Technology
- dépliants
- ou étiquettes-énergie ATEN Technology CN8600
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation ATEN Technology CN8600.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation ATEN Technology CN8600, manuels d’entretien, brefs manuels ou manuels de l’utilisateur ATEN Technology CN8600. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit ATEN Technology CN8600.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil ATEN Technology CN8600, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser ATEN Technology CN8600 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs ATEN Technology CN8600.

Le manuel d’utilisation complet ATEN Technology, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel ATEN Technology CN8600 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières ATEN Technology CN8600, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lATEN Technology CN8600 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil ATEN Technology CN8600 - qui devraient nous aider dans les premières étapes lors de l'utilisation ATEN Technology CN8600
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de ATEN Technology CN8600
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service ATEN Technology CN8600 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de ATEN Technology CN8600?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec ATEN Technology CN8600, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec ATEN Technology CN8600 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)