Français dropdown-ico

Manuel d’utilisation Hitachi CP-WU8450

38 pages 2.16 mb
Télécharger

Aller à la page of 38

Summary
  • Hitachi CP-WU8450 - page 1

    1 Projector CP-X8150/CP-X8160/ CP-WX8240/CP-WX8255/ CP-SX8350/CP-WU8440/CP-WU8450 User's Manual (detailed) Operating Guide – T echnical Resolution (H x V) H. frequency (kHz) V . frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0 VESA TEXT 640 x 480 31.5 59.9 VESA VGA (60Hz) 640 x 480 37.9 72.8 VESA VGA (72Hz) 640 x 480 37.5 75.0 VESA VGA ...

  • Hitachi CP-WU8450 - page 2

    2 Example of computer signal Resolution (H x V) H. frequency (kHz) V . frequency (Hz) Rating Signal mode *1 1280 x 1024 91.1 85.0 VESA SXGA (85Hz) *2 1400 x 1050 65.2 60.0 VESA SXGA+ (60Hz) *3 1680 x 1050 65.3 60.0 VESA WSXGA+ (60Hz) *1 1600 x 1200 75.0 60.0 VESA UXGA (60Hz) *4 1920 x 1200 74.0 60.0 VESA W-UXGA (60Hz) Reduced Blanking *1) Supported ...

  • Hitachi CP-WU8450 - page 3

    3 Initial set signals Back porch (B) Front porch (D) Back porch (b) Front porch (d) Active video (C) Data Data H. Sync. V. Sync. Sync (A) Sync (a) Active video (c) Resolution (H x V) Horizontal signal timing (μs) V ertical signa l tim ing (l ines) Signal mode (A) (B) (C) (D) (a) (b) (c) (d) 720 x 400 2.0 3.0 20.3 1.0 3 42 400 1 TEXT 640 x 480 3.8 ...

  • Hitachi CP-WU8450 - page 4

    4 A COMPUTER IN1, B MONITOR OUT D-sub 15pin mini shrink jack <Computer signal> • Video signal: RGB separate, Analog, 0.7Vp-p, 75Ω terminated (positive) • H/V . sync. signal: TTL level (positive/negative) • Composite sync. signal: TTL level <Component video signal> • Video signal: Y with composite sync, Analog, 1.0±0.1Vp-p, 75? ...

  • Hitachi CP-WU8450 - page 5

    5 Connection to the por ts (continued) COMPUTER IN2 C G/Y, D B/Cb/Pb, E R/Cr/Pr, F H, G V BNC jack x5 <Computer signal> • Video signal: RGB separate, Analog, 0.7Vp-p, 75Ω terminated (positive) • H/V . sync. signal: TTL level (positive/negative) • Composite sync. signal: TTL level <Component video signal> • Video signal: Y with ...

  • Hitachi CP-WU8450 - page 6

    6 M S-VIDEO Mini DIN 4pin jack • S-video signal, Analog: -Brightness signal with composite sync, 1.0±0.1Vp-p, 75Ω terminated -Color signal, 0.286Vp-p (NTSC, burst), 75Ω terminated 0.300Vp-p (P AL/SECAM, burst) 75Ω terminated • System: NTSC, P AL, SECAM, P AL-M, P AL-N, NTSC4.43, P AL(60Hz) Pin Signal 1 C (color signal) 2 Y (brightness signa ...

  • Hitachi CP-WU8450 - page 7

    7 Connection to the por ts (continued) O AUDIO IN1, P AUDIO IN2 Ø3.5 stereo mini jack • Analog, 500 mV rms, 47kΩ input impedance AUDIO IN3 Q L, R R AUDIO OUT S L, T R RCA jack x2 RCA jack x2 • Analog, 500 mV rms, 47kΩ input impedance • Analog, 500 mV rms, 1kΩ output impedance U CONTROL D-sub 9pin plug * About the details of RS-232C com ...

  • Hitachi CP-WU8450 - page 8

    8 REMOTE CONTROL Y IN, Z OUT Ø3.5 stereo mini jack Connection to the por ts (continued) X USB TYPE B USB B type jack Pin Signal 1 +5V 2 - Data 3 + Data 4 Ground V LAN RJ-45 jack * About the details of network communication, please refer to the Network Guide . Pin Signal Pin Signal Pin Signal 1 TX+ 4 - 7 - 2 TX- 5 - 8 - 3 RX+ 6 RX- W USB TYPE A USB ...

  • Hitachi CP-WU8450 - page 9

    9 T o input SCART RGB signal; ex. Video G B R Audio L Audio R Connection to the por ts (continued) T o input SCART RGB signal to the projector , use a SCART to RCA cable. Connect the plugs refer to above ex. For more reference, please consult your dealer . SCART connector (jack) SCART cable (plug) RCA plugs ...

  • Hitachi CP-WU8450 - page 10

    10 ① ② ⑥⑦⑧⑨ ⑤ ④ ③ ① ② ⑥ ⑦ ⑧ ⑨ ⑤④③ CD (1) (1) － RD(2) (2) RD TD (3) (3) TD DTR (4) (4) － GND (5) (5) GND DSR (6) (6) － RTS (7) (7) R TS DTS (8) (8) CTS RI (9) (9) － RS-232C Communication RS-232C Communication When the projector connects to the computer by RS-232C communication, the projector can be control ...

  • Hitachi CP-WU8450 - page 11

    11 RS-232C Communication (continued) Communicaion settings 1. Protocol 19200bps, 8N1 2. Command for ma t ("h" shows hexadecimal) Byte Number 0 1 2 3 4 5 6 7 8 9 10 11 12 Command Action Header Data Header code Packet Data size CRC ag Action T ype Setting code L H L H L H L H L H L H <SET> Change setting to desired value [(cL)(cH)] ...

  • Hitachi CP-WU8450 - page 12

    12 RS-232C Communication (continued) 3. R esponse code / Er r or code ("h" shows hexadecimal) (1) ACK reply: 06h When the projector receives the Set, Increment, Decrement or Execute command correctly , the projector changes the setting data for the specied item by [T ype], and it returns the code. (2) NAK reply: 15h When the projector ...

  • Hitachi CP-WU8450 - page 13

    13 When the projector connects network, the projector can be controlled with RS- 232C commands from the computer with web browser . For details of RS-232C commands, refer to RS-232C Communication / Network command table ( & 19 ). Command Control via the Networ k LAN USB wireless adapter LAN cable (CAT-5 or greater) Connection 1. T urn off the p ...

  • Hitachi CP-WU8450 - page 14

    14 Communicaion P or t The following two ports are assigned for the command control. TCP #23 TCP #9715 Congure the following items form a web browser when command control is used. Port Settings Network Control Port1 (Port: 23) Port open Click the [Enable] check box to open [Netwo rk Control Port1 (Port: 23)] to use TCP #23. Default setting is ? ...

  • Hitachi CP-WU8450 - page 15

    15 Command Control via the Networ k (continued) Command control settings [TCP #23] 1. Command for ma t Same as RS-232C communication, refer to R S-232C Communicaton command format. 2. R esponse code / Er r or code ("h" shows hexadecimal) Four of the response / error code used for TCP#23 are the same as RS-232C Communication (1)~(4). One a ...

  • Hitachi CP-WU8450 - page 16

    16 NO TE • As for the transmission of the second or subsequent commands, the authentication data can be omitted when the same connection. Command Control via the Networ k (continued) 2. R esponse code / Er r or code ("h" shows hexadecimal) The connection ID is attached for the TCP#23's response / error codes are used. The connectio ...

  • Hitachi CP-WU8450 - page 17

    17 This projector is equipped with NETWORK BRIDGE function. When the projector connects to the computer by wired or wireles LAN communicaton, an external device that is connected with this projector by RS- 232C communication can be controlled from the computer as a network terminal. For details, see the 6. Network Bridge function in the Network Gui ...

  • Hitachi CP-WU8450 - page 18

    18 Communication settings For communication setting, use the COMMUNICA TION menu in the OPTION - SERVICE menu Item Condition BAUD RA TE 4800bps / 9600bps / 19200bps / 38400bps Data length 8 bit (xed) P ARITY NONE/ODD/EVEN Start bit 1 bit (xed) Stop bit 1 bit (xed) T ransmission method HALF-DUPLEX/FULL-DUPLEX NO TE • For connecting the pr ...

  • Hitachi CP-WU8450 - page 19

    19 RS-232C Communication / Network command table RS-232C Communication / Netw or k command table (continued on next page) Names Operation T ype Header CRC Command Data Action T ype Setting code Power Set T urn off BE EF 03 06 00 2A D3 01 00 00 60 00 00 T urn on BE EF 03 06 00 BA D2 01 00 00 60 01 00 Get BE EF 03 06 00 19 D3 02 00 00 60 00 00 [Examp ...

  • Hitachi CP-WU8450 - page 20

    RS-232C Communication / Netw or k command table (continued) 20 (continued on next page) Names Operation T ype Header CRC Command Data Action T ype Setting code LENS MEMORY LENS SHIFT - V Get BE EF 03 06 00 A0 91 02 00 0D 24 00 00 LENS MEMORY LENS SHIFT - H Get BE EF 03 06 00 E4 91 02 00 0E 24 00 00 LENS MEMORY LENS TYPE Get BE EF 03 06 00 18 90 02 ...

  • Hitachi CP-WU8450 - page 21

    RS-232C Communication / Netw or k command table (continued) 21 (continued on next page) Names Operation T ype Header CRC Command Data Action T ype Setting code GAMMA Set 1 DEF AUL T BE EF 03 06 00 07 E9 01 00 A1 30 20 00 1 CUSTOM BE EF 03 06 00 07 FD 01 00 A1 30 10 00 2 DEF AUL T BE EF 03 06 00 97 E8 01 00 A1 30 21 00 2 CUSTOM BE EF 03 06 00 97 FC ...

  • Hitachi CP-WU8450 - page 22

    RS-232C Communication / Netw or k command table (continued) 22 (continued on next page) Names Operation T ype Header CRC Command Data Action T ype Setting code User GAMMA Point 6 Get BE EF 03 06 00 C4 FE 02 00 95 30 00 00 Increment BE EF 03 06 00 A2 FE 04 00 95 30 00 00 Decrement BE EF 03 06 00 73 FF 05 00 95 30 00 00 User GAMMA Point 6 Reset Execu ...

  • Hitachi CP-WU8450 - page 23

    RS-232C Communication / Netw or k command table (continued) 23 (continued on next page) Names Operation T ype Header CRC Command Data Action T ype Setting code COLOR TEMP OFFSET R Get BE EF 03 06 00 04 F5 02 00 B5 30 00 00 Increment BE EF 03 06 00 62 F5 04 00 B5 30 00 00 Decrement BE EF 03 06 00 B3 F4 05 00 B5 30 00 00 COLOR TEMP OFFSET R Reset Exe ...

  • Hitachi CP-WU8450 - page 24

    RS-232C Communication / Netw or k command table (continued) 24 (continued on next page) Names Operation T ype Header CRC Command Data Action T ype Setting code OVER SCAN Get BE EF 03 06 00 91 70 02 00 09 22 00 00 Increment BE EF 03 06 00 F7 70 04 00 09 22 00 00 Decrement BE EF 03 06 00 26 71 05 00 09 22 00 00 OVER SCAN Reset Execute BE EF 03 06 00 ...

  • Hitachi CP-WU8450 - page 25

    RS-232C Communication / Netw or k command table (continued) 25 (continued on next page) Names Operation T ype Header CRC Command Data Action T ype Setting code S-VIDEO FORMA T Set AUTO BE EF 03 06 00 E6 70 01 00 12 22 0A 00 NTSC BE EF 03 06 00 86 74 01 00 12 22 04 00 P AL BE EF 03 06 00 16 75 01 00 12 22 05 00 SECAM BE EF 03 06 00 16 70 01 00 12 22 ...

  • Hitachi CP-WU8450 - page 26

    RS-232C Communication / Netw or k command table (continued) 26 (continued on next page) Names Operation T ype Header CRC Command Data Action T ype Setting code AUTO KEYSTONE V EXECUTE Execute BE EF 03 06 00 E5 D1 06 00 0D 20 00 00 KEYSTONE V Get BE EF 03 06 00 B9 D3 02 00 07 20 00 00 Increment BE EF 03 06 00 DF D3 04 00 07 20 00 00 Decrement BE EF ...

  • Hitachi CP-WU8450 - page 27

    RS-232C Communication / Netw or k command table (continued) 27 (continued on next page) Names Operation T ype Header CRC Command Data Action T ype Setting code (*) PERFECT FIT Left Side Distortion Get BE EF 03 06 00 31 97 02 00 41 21 00 00 Increment BE EF 03 06 00 57 97 04 00 41 21 00 00 Decrement BE EF 03 06 00 86 96 05 00 41 21 00 00 (*) PERFECT ...

  • Hitachi CP-WU8450 - page 28

    RS-232C Communication / Netw or k command table (continued) 28 (continued on next page) Names Operation T ype Header CRC Command Data Action T ype Setting code ST ANDBY MODE Set NORMAL BE EF 03 06 00 D6 D2 01 00 01 60 00 00 SA VING BE EF 03 06 00 46 D3 01 00 01 60 01 00 Get BE EF 03 06 00 E5 D2 02 00 01 60 00 00 MONITOR OUT - COMPUTER IN1 Set COMPU ...

  • Hitachi CP-WU8450 - page 29

    RS-232C Communication / Netw or k command table (continued) 29 (continued on next page) Names Operation T ype Header CRC Command Data Action T ype Setting code VOLUME - COMPUTER IN1 Get BE EF 03 06 00 CD CC 02 00 60 20 00 00 Increment BE EF 03 06 00 AB CC 04 00 60 20 00 00 Decrement BE EF 03 06 00 7A CD 05 00 60 20 00 00 VOLUME - COMPUTER IN2 Get B ...

  • Hitachi CP-WU8450 - page 30

    RS-232C Communication / Netw or k command table (continued) 30 (continued on next page) RS-232C Communication / Netw or k command table (continued) Names Operation T ype Header CRC Command Data Action T ype Setting code AUDIO SOURCE - COMPUTER IN1 Set AUDIO IN1 BE EF 03 06 00 6E DC 01 00 30 20 01 00 AUDIO IN2 BE EF 03 06 00 9E DC 01 00 30 20 02 00 ...

  • Hitachi CP-WU8450 - page 31

    RS-232C Communication / Netw or k command table (continued) 31 (continued on next page) RS-232C Communication / Netw or k command table (continued) Names Operation T ype Header CRC Command Data Action T ype Setting code AUDIO SOURCE - S-VIDEO Set AUDIO IN1 BE EF 03 06 00 D6 DD 01 00 32 20 01 00 AUDIO IN2 BE EF 03 06 00 26 DD 01 00 32 20 02 00 AUDIO ...

  • Hitachi CP-WU8450 - page 32

    RS-232C Communication / Netw or k command table (continued) 32 (continued on next page) Names Operation T ype Header CRC Command Data Action T ype Setting code LANGUAGE Set TÜRKÇE BE EF 03 06 00 07 D6 01 00 05 30 0F 00 DANSK BE EF 03 06 00 A7 DF 01 00 05 30 1 1 00 ČESKY BE EF 03 06 00 57 DF 01 00 05 30 12 00 MAGY AR BE EF 03 06 00 C7 DE 01 00 05 ...

  • Hitachi CP-WU8450 - page 33

    RS-232C Communication / Netw or k command table (continued) 33 (continued on next page) Names Operation T ype Header CRC Command Data Action T ype Setting code TEMPLA TE Set TEST P A TTERN BE EF 03 06 00 43 D9 01 00 22 30 00 00 DOT -LINE 1 BE EF 03 06 00 D3 D8 01 00 22 30 01 00 DOT -LINE 2 BE EF 03 06 00 23 D8 01 00 22 30 02 00 DOT -LINE 3 BE EF 03 ...

  • Hitachi CP-WU8450 - page 34

    RS-232C Communication / Netw or k command table (continued) 34 (continued on next page) Names Operation T ype Header CRC Command Data Action T ype Setting code SOURCE SKIP - COMPONENT Set NORMAL BE EF 03 06 00 32 78 01 00 25 22 00 00 SKIP BE EF 03 06 00 A2 79 01 00 25 22 01 00 Get BE EF 03 06 00 01 78 02 00 25 22 00 00 SOURCE SKIP - S- VIDEO Set NO ...

  • Hitachi CP-WU8450 - page 35

    RS-232C Communication / Netw or k command table (continued) 35 (continued on next page) Names Operation T ype Header CRC Command Data Action T ype Setting code MY BUTT ON-1 Set SLIDESHOW BE EF 03 06 00 9A 2B 01 00 00 36 22 00 MY IMAGE BE EF 03 06 00 5A 3D 01 00 00 36 16 00 MESSENGER BE EF 03 06 00 AA 29 01 00 00 36 25 00 SHADE BE EF 03 06 00 5A 26 ...

  • Hitachi CP-WU8450 - page 36

    Names Operation T ype Header CRC Command Data Action T ype Setting code MY BUTT ON-4 Set SLIDESHOW BE EF 03 06 00 DE 2B 01 00 03 36 22 00 MY IMAGE BE EF 03 06 00 1E 3D 01 00 03 36 16 00 MESSENGER BE EF 03 06 00 EE 29 01 00 03 36 25 00 SHADE BE EF 03 06 00 1E 26 01 00 03 36 32 00 INFORMA TION BE EF 03 06 00 BE 3E 01 00 03 36 10 00 AUTO KEYSTONE V BE ...

  • Hitachi CP-WU8450 - page 37

    37 PJLink command PJLink command POWR Power Contorol 0 = Standby 1 = Power On POWR ? Power Status inquiry 0 = Standby 1 = Power On 2 = Cool Down INPT Input Source selection 1 1 = COMPUTER IN 1 12 = COMPUTER IN 2 21 = COMPONENT 22 = S-VIDEO 23 = VIDEO 31 = HDMI 1 33 = HDMI 2 41 = USB TYPE A 51 = LAN 52 = USB TYPE B INPT ? Input Source inquiry 1 1 = ...

  • Hitachi CP-WU8450 - page 38

    38 PJLink command (continued) Commands Control Description Parameter or Response ERST ? Error Status inquiry 1st byte: Refers to Fan error; one of 0 to 2 2nd byte: Refers to Lamp error; one of 0 to 2 3rd byte: Refers to T emptrature error; one of 0 to 2 4th byte: Refers to Cover error; one of 0 to 2 5th byte: Refers to Filter error; one of 0 to 2 6 ...

Fabricant Hitachi Catégorie Projector

Les documents que nous recevons du fabricant de l'appareilHitachi CP-WU8450 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Hitachi
- manuels d’utilisations CP-WU8450
- fiches produit Hitachi
- dépliants
- ou étiquettes-énergie Hitachi CP-WU8450
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Hitachi CP-WU8450.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Hitachi CP-WU8450, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Hitachi CP-WU8450. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Hitachi CP-WU8450.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Hitachi CP-WU8450, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Hitachi CP-WU8450 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Hitachi CP-WU8450.

Le manuel d’utilisation complet Hitachi, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Hitachi CP-WU8450 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Hitachi CP-WU8450, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lHitachi CP-WU8450 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Hitachi CP-WU8450 - qui devraient nous aider dans les premières étapes lors de l'utilisation Hitachi CP-WU8450
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Hitachi CP-WU8450
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Hitachi CP-WU8450 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Hitachi CP-WU8450?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Hitachi CP-WU8450, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Hitachi CP-WU8450 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)