Français dropdown-ico

Manuel d’utilisation Remote Technologies T3

34 pages 1.05 mb
Télécharger

Aller à la page of 34

Summary
  • Remote Technologies T3 - page 1

    IR-PRO Professional Infrared Code Capture System T3 U n iversal System C ontr oller T3 Operation Guide v1.0 ...

  • Remote Technologies T3 - page 2

    i FEDERAL COMMUNICATIONS COMMISSION NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio ...

  • Remote Technologies T3 - page 3

    T3 Universal System Controller ii BATTERY DISPOSAL For environmental reasons, your T3 universal system controller uses “environmentally sound” Lithium-ion rechargeable batteries. These batteries do not contain any poisonous heavy metals that can damage the environment. In the interest of recycling, please do not dispose of these batteries in th ...

  • Remote Technologies T3 - page 4

    iii Servicing. Do not attempt any service beyond that described in the operating guide. Refer all other service needs to qualified service personnel. Damage Requiring Service. The unit should be serviced by qualified service personnel when: • The power supply cord or the plug has been damaged. • Objects have fallen or liquid has been spilled in ...

  • Remote Technologies T3 - page 5

    T3 Universal System Controller iv Remote Technologies Incorporated is not liable for any damages caused by its products or for its failure of its products to perform, including any lost profits, lost savings, incidental damages, or consequential damages. Remote Technologies Incorporated is not liable for damages based upon inconvenience, loss of us ...

  • Remote Technologies T3 - page 6

    v Content s Federal Communications Commission Notice ---------------------- i Battery Disposal ----------------------------------------------------------- ii Safety Suggestions -------------------------------------------------------- ii Limited Warranty -------------------------------------------------------- iii Disclaimer ------------------------ ...

  • Remote Technologies T3 - page 7

    T3 Universal System Controller vi Battery ------------------------------------------------------------------- 17 Sound -------------------------------------------------------------------- 18 Calibrate Touchscreen ------------------------------------------------ 19 Programming The T3 ---------------------------------------------------- 20 Chapter 4. ...

  • Remote Technologies T3 - page 8

    1 Chapter 1. Welcome Thank you for purchasing the T3 universal system controller. The T3 combines the power and flexibility of a graphic LCD touchscreen with an ergonomic design that permits effortless one- handed operation. This design overcomes the need for a compromise between form and function. Sleek and perfectly balanced, the T3 is infinitely ...

  • Remote Technologies T3 - page 9

    T3 Universal System Controller 2 UNPACKING AND INSPECTION After unpacking your new T3 universal system controller, save all of the packing materials in case you ever have to ship the unit. Thoroughly inspect the T3 and packing materials for signs of damage. Report any damage to the carrier immediately. Report any equipment malfunctions to Remote Te ...

  • Remote Technologies T3 - page 10

    3 Chapter 2. Introduction FEATURES The T3 provides superior quality and reliability as well as these specific features:  A replacement for all of the remote controls in a home theater. The T3 can reproduce all of the commands of almost any other infrared remote control.  A programmable graphic display. The T3 uses powerful Windows ® based so ...

  • Remote Technologies T3 - page 11

    T3 Universal System Controller 4  Both infrared (IR) and radio frequency (RF) output options. You can even use both options on the same unit.  A built in motion sensor can automatically turn the unit on when it is picked up.  A USB port for communication with the TheaterTouch Designer programming software.  Non-volatile flash memory. Th ...

  • Remote Technologies T3 - page 12

    Introduction 5  Do not disassemble the unit. Service of the T3 should be performed by authorized personnel only. CLEANING Occasional cleaning may be required, depending on use. It is recommended that you create a “Clean” button somewhere on the Home page of the T3 . This button should link to a page that does not contain commands or macros t ...

  • Remote Technologies T3 - page 13

    T3 Universal System Controller 6 often. Since the T3 can safely be charged after each use, a docking station is included for convenience. If left out of the docking station, the T3 will remain in sleep mode for 1 – 2 months before shutting down. At that point the battery must be recharged. The T3 Docking Station can be placed on a flat surface su ...

  • Remote Technologies T3 - page 14

    Introduction 7 GETTING STARTED Start by inserting the battery connector into the mating plug on the T3 . Make sure the connector is oriented properly before attempting to insert it. Next, turn the unit on by sliding the power switch into the “ON” position (toward the battery). After power is applied, the T3 will take approximately ten seconds t ...

  • Remote Technologies T3 - page 15

    T3 Universal System Controller 8 REMOTE REFERENCE Front Touchscreen Display Home Page Button Keypad Buttons Light Sensor Page Scroll Buttons ...

  • Remote Technologies T3 - page 16

    Introduction 9 Back Docking Station Contacts Lithium-ion Battery Pack Power Switch USB Programming Port Audio Speaker IR Transmission Window ...

  • Remote Technologies T3 - page 17

    T3 Universal System Controller 10 DOCKING STATION REFERENCE Back Front Charge Contacts Charge LED Power Jack Wire Guide Wall Mount Holes 1-3/8 in. ( 35mm ) ...

  • Remote Technologies T3 - page 18

    11 Chapter 3. Operation THE TOUCHSCREEN DISPLAY The T3 touchscreen display is organized into a series of pages. Normally each page contains objects (buttons, text, graphics, etc.) that are related in some way. For instance, they may all display information necessary for controlling a particular DVD player. By default, the T3 has one Home page—all ...

  • Remote Technologies T3 - page 19

    T3 Universal System Controller 12 THE CONTROL PANEL PA GE The Control Panel page can be displayed by first setting the T3 power switch to the off position, and then pressing and holding the Home button while sliding the power switch to the on position. You can also access the Control Panel page by assigning a “Control Panel” page link to a butt ...

  • Remote Technologies T3 - page 20

    Operation 13 BACKLIGHT LEVEL This button displays a window that allows you to adjust the backlight brightness and enable/disable the Ambient Light Sensor. If the light sensor is disabled, there is only one backlight level to adjust. Press the left arrow or right arrow buttons to adjust. Press the OK button when finished. With the light sensor disab ...

  • Remote Technologies T3 - page 21

    T3 Universal System Controller 14 If the light sensor is enabled, there are two backlight levels to adjust. Press the left arrow or right arrow buttons to adjust. Press the OK button when finished. With the light sensor enabled, the backlight brightness will automatically change between the two levels, depending upon the ambient lighting conditions ...

  • Remote Technologies T3 - page 22

    Operation 15 TIME OUT This button displays a window that allows you to adjust the amount of time the unit stays awake after the last button press. The time is variable from 1 second to 120 seconds (the default is 10 seconds). Press the arrows to the left or right of the Time Out setting to adjust the time. Press the OK button when finished. This se ...

  • Remote Technologies T3 - page 23

    T3 Universal System Controller 16 TILT SWITCH This button displays a window that allows you to adjust the settings for the built-in tilt sensor. The tilt switch is a motion detector that turns the remote on when activated. On means the tilt switch is active and will wake-up the T3 when it is moved. Off means the tilt switch is inactive. Press the O ...

  • Remote Technologies T3 - page 24

    Operation 17 BATTERY This button displays a window that allows you to adjust the relative amount of time that the low battery icon appears on the display. This setting will determine how much time you have between the appearance of the low battery warning and the battery becoming completely depleted. Press the OK button when finished. The default w ...

  • Remote Technologies T3 - page 25

    T3 Universal System Controller 18 SOUND This button displays a window that allows you to adjust the volume of the audible speaker. The speaker sound provides feedback that a button was pressed. Press the arrows to the left or right to adjust the volume. Press the OK button when finished. There are six discrete volume settings. The lowest setting di ...

  • Remote Technologies T3 - page 26

    Operation 19 CALIBRATE TOUCHSCREEN This button runs a routine that allows you to calibrate the touchscreen. Since it normally should not be necessary to calibrate the touchscreen, this routine is included as a precaution only. Warning : Do not attempt to calibrate the touchscreen with your fingertip. Proper calibration requires a stylus or other fi ...

  • Remote Technologies T3 - page 27

    T3 Universal System Controller 20 PROGRAMMING THE T3 The T3 is programmed using RTI’s TheaterTouch Designer software. RTI dealers can download the software free of charge from: www.rticorp.com/dealers A PC running Windows ® 98SE or higher w ith a USB port is required. The required USB cable is included with the RTI IR- PRO dealer kit. ...

  • Remote Technologies T3 - page 28

    21 Chapter 4. Troubleshooting If you are having problems with your T3 , please read these troubleshooting tips before contacting technical support. If you continue to have problems, see Chapter 5 for more information on contacting RTI technical support. DISPLAY IS DIM, BLAN K OR UNREADABLE Make sure the battery pack connector is attached properly a ...

  • Remote Technologies T3 - page 29

    T3 Universal System Controller 22 IR CODE PROBLEMS If you are using an IR repeater system, make sure it is working correctly with the original OEM remote. If not, you will need to troubleshoot the IR repeater system. If you are still having problems, try adjusting the IR code “Minimum Repeats” value in the TheaterTouch Designer programming soft ...

  • Remote Technologies T3 - page 30

    23 Chapter 5. Service and Support UPDATES AND NEW PRODUCTS For news about the latest updates, new product information and accessories, please visit our web site at: www.rticorp.com CONTACTING REMOTE TECHNOLOGIES INCORPORA TED For general info, you can contact RTI at: Remote Technologies Incorporated Tel. (952) 253-3100 Fax (952) 253-3131 info@rtico ...

  • Remote Technologies T3 - page 31

    T3 Universal System Controller 24 If you are having a problem with hardware, please note the equipment in your system, a description of the problem, and any troubleshooting you have already tried. If you are having a problem with software, please note what version you have installed, the operating system on your PC, a description of the problem, an ...

  • Remote Technologies T3 - page 32

    25 Specifications Power 3.6 VDC, 1300 mAH Li-Ion Battery Pack Power Management Automatic On/Off (tilt switch) Infrared Control Range 30 Feet (9.1m) @ 60 Degrees Infrared Frequency Range 15kHz – 460kHz Radio Frequency Control Range Up to 100 Feet (30.5m) (with optional receivers) Radio Frequency Carrier 433MHz Operating Temperature +32°F to +122? ...

  • Remote Technologies T3 - page 33

    T3 Universal System Controller 26 Battery Charge Time 3-4 Hours Total System Memory 32MBytes Flash (non- volatile) Device Capability Total number of devices limited only by memory Macro Capability Up to 64 steps per macro Total number of macros limited only by memory Macros allowed on every button Communications USB programming port Dimensions Leng ...

  • Remote Technologies T3 - page 34

    IR-PRO Professional Infrared Code Capture System Remote Technologies Incorporated 7651 Anagram Drive Eden Prairie, MN 55344 Tel: 952-253-3100 Fax: 952-253-3131 www.rticorp.com © 2005 Remote Technologies Inc. All rights reserved. Printed in Taiwan. It’s Under Control ® ...

Fabricant Remote Technologies Catégorie Universal Remote

Les documents que nous recevons du fabricant de l'appareilRemote Technologies T3 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Remote Technologies
- manuels d’utilisations T3
- fiches produit Remote Technologies
- dépliants
- ou étiquettes-énergie Remote Technologies T3
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Remote Technologies T3.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Remote Technologies T3, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Remote Technologies T3. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Remote Technologies T3.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Remote Technologies T3, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Remote Technologies T3 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Remote Technologies T3.

Le manuel d’utilisation complet Remote Technologies, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Remote Technologies T3 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Remote Technologies T3, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lRemote Technologies T3 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Remote Technologies T3 - qui devraient nous aider dans les premières étapes lors de l'utilisation Remote Technologies T3
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Remote Technologies T3
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Remote Technologies T3 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Remote Technologies T3?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Remote Technologies T3, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Remote Technologies T3 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)