Français dropdown-ico

Manuel d’utilisation Petsafe PIG00-10773

36 pages 3.51 mb
Télécharger

Aller à la page of 36

Summary
  • Petsafe PIG00-10773 - page 1

    P etSafe ® Delux e Little Dog In-Ground F ence ™ Operating and T raining Guide Please read this entire guide before beginning. Model Number PIG00-10773 ...

  • Petsafe PIG00-10773 - page 2

    2 Customer Care Center 1-800-732-2677 Important Safety Information Explanation of Attention W ords and Symbols used in this guide This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. WARNING WARNING indicates a hazardous sit ...

  • Petsafe PIG00-10773 - page 3

    www .petsafe.net 3 CAUTION This PetSafe ® In-Ground Fence ™ is not a solid barrier. This system is designed to act as a deterrent to remind pets by Static Correction to remain in the boundary established. It is important that you reinforce training with your pet on a regular basis. Proper fi t of the collar is important. A collar worn for too l ...

  • Petsafe PIG00-10773 - page 4

    4 Customer Care Center 1-800-732-2677 NOTICE Plug the Surge Protector into a grounded (3-prong) outlet that is • within 5 feet of the Fence Transmitter. ALWAYS use a grounded (3-prong) outlet to ensure maximum protection. Do not remove the ground prong from the Surge Protector • plug. Do not use a 3-prong plug to 2-prong outlet converter. Doing ...

  • Petsafe PIG00-10773 - page 5

    www .petsafe.net 5 Thank you for choosing P etSafe ® brand. Y ou and y our pet deser ve a companionship that includes memorable moments and a shared understanding together. Our products and training tools promote a lifestyle of protection, teaching, and lo v e — essentials that infl uence memor ies for a lifetime. If y ou ha v e an y questions ...

  • Petsafe PIG00-10773 - page 6

    6 Customer Care Center 1-800-732-2677 T roubleshooting ............................................................................... 30 Additional Infor mation ....................................................................... 31 System T est ........................................................................................ 32 T ransmi ...

  • Petsafe PIG00-10773 - page 7

    www .petsafe.net 7 Components Other Items Y ou May Need Additional wire and fl ags • (Part #PRFA-500) T ape measure • Small Phillips screwdriver • Drill & mounting hardware • Shov el or lawn edger • Pliers • Wire stripping plier s • Scissors • Lighter • Additional wire nuts • Ground rod and clamp • W ater proofi ng compo ...

  • Petsafe PIG00-10773 - page 8

    8 Customer Care Center 1-800-732-2677 How the System W orks A radio signal trav els from the F ence T ransmitter through a buried wire, marking the boundaries you wish to set for your dog. Y our dog wears a Receiver Collar that detects the signal at the boundary . As your dog approaches the boundary, the receiver issues a warning tone. If he procee ...

  • Petsafe PIG00-10773 - page 9

    www .petsafe.net 9 Operating Guide Locate the F ence T ransmitter Place the Fence T ransmitter : In a dr y , well ventila ted, protected area ( • 1A, 1B ). In an area where temperatures do not fall below freezing (e.g., garage, basement, • shed, closet). Secured to a stationary surf ace using the mounting hardware. A mounting template is • in ...

  • Petsafe PIG00-10773 - page 10

    10 Customer Care Center 1-800-732-2677 Design a layout tha t is suitable for your y ard. Sample la y outs are provided in this section, • and a gr id for designing your lay out is provided in the back of this guide. Fence planning softw are is av ailable online at www .petsafe.net/fence. • Alwa ys use gradual turns at the cor ner s with a minim ...

  • Petsafe PIG00-10773 - page 11

    www .petsafe.net 11 Double Loop A Double Loop must be used when you are not establishing the Boundary Zone on all sides of your property . When using a Double Loop, the Boundar y Wire must be separated by a minimum of 5 FEET to av oid canceling the signal. Remember tha t a Double Loop will require twice as much wire. E F B A D C E F C A D B 2F Samp ...

  • Petsafe PIG00-10773 - page 12

    12 Customer Care Center 1-800-732-2677 P osition the Boundar y Wire Lay out the Boundary Wire using your planned boundar y and test the system BEFORE burying the wire or attaching it to an existing fence. This will make any la yout changes easier . W ork carefully . A nick in the wire insulation can diminish the signal strength and create a w eak a ...

  • Petsafe PIG00-10773 - page 13

    www .petsafe.net 13 T o Splice or Repair the Boundar y Wire If you need additional Boundary Wire to expand your wire loop, you will need to splice the wires together. Note the locations of all splices for future reference. Strip approximately 3 ⁄ 8 inch of insulation off the ends of the Boundar y Wires to be spliced ( 3D ). Make sure the copper B ...

  • Petsafe PIG00-10773 - page 14

    14 Customer Care Center 1-800-732-2677 Connect the Wires to the Surge Protector and F ence T ransmitter (USA and Canada) Surge Protection Lightning strikes that occur even several miles a way from y our installation can create pow er surges or spikes which may damage your unprotected electronic pet containment system. The Surge Protector included w ...

  • Petsafe PIG00-10773 - page 15

    www .petsafe.net 15 T ur n the power OFF to the 1. outlet that the Surge Protector and Fence T ransmitter will be plugged into . W e recommend that, if 2. possible, use the outlet center screw that holds the cov er plate in place to secure the Surge Protector to the outlet. T o do this, tape the top of the cov er pla te to the w all, then remov e t ...

  • Petsafe PIG00-10773 - page 16

    16 Customer Care Center 1-800-732-2677 Connect the Wires to the F ence T ransmitter (Australia & New Zealand) Ground Wire (4C) Proper grounding , although not necessary for the system to work, will help reduce the chance of electrical surges causing damage to your F ence T ransmitter and/or Po w er Adapter. T o g round your unit, you will need ...

  • Petsafe PIG00-10773 - page 17

    www .petsafe.net 17 Prepare the Receiv er Collar T o Inser t and Remov e the Batter y Note: Do not install the batter y while the Receiver Collar is on y our pet. This Receiver Collar utilizes a replaceable P etSafe ® batter y (RF A-188). This unique batter y is designed to make battery replacement easier and increase water protection. T o activat ...

  • Petsafe PIG00-10773 - page 18

    18 Customer Care Center 1-800-732-2677 The Static Correction Levels increase from 1 to 5. Pushing the Cor rection Level Button while the Receiver Collar is on lev el 5 will cause the Receiver Collar to revert to level 1. Refer to the Function and Response T able to choose the Static Correction level that best fi ts your pet. The Receiver Indicator ...

  • Petsafe PIG00-10773 - page 19

    www .petsafe.net 19 Set the Boundar y Width and T est the Receiv er Collar With the Boundar y Wire in place and properly connected, it is time to set the containment fi eld and test the system. CAUTION The Receiver Collar should NOT be on your dog when the system is tested. Note: The Receiver Collar is w ater proof, which can make the tone hard to ...

  • Petsafe PIG00-10773 - page 20

    20 Customer Care Center 1-800-732-2677 T wo seconds after the warning tone, the test light will begin to fl ash. This fl ashing light can aid you in identifying the Boundary Width should you have diffi culty hearing the tone. T o av oid ha ving the Receiv er Collar go into Ov er Correction Protection mode, walk back into the P et Area until the ...

  • Petsafe PIG00-10773 - page 21

    www .petsafe.net 21 Install the Boundar y Wire NOTICE Before you begin installing the Boundary Wire, unplug the Fence Transmitter power adapter from the Surge Protector or outlet. T o Bur y the Boundar y Wire Bur ying the Boundar y Wire is recommended to protect it and prevent disabling the system. Cut a trench 1. 1-3 inches deep along your planned ...

  • Petsafe PIG00-10773 - page 22

    22 Customer Care Center 1-800-732-2677 T o Cross Hard Surf aces (dr iv eways, sidewalks, etc.) WARNING Follow all safety instructions for your power tools. Be sure to always wear your safety goggles. Concrete Driveway or • Sidewalk (7C): Place the Boundar y Wire in a conv enient expansion joint or create a groove using a circular saw and masonr y ...

  • Petsafe PIG00-10773 - page 23

    www .petsafe.net 23 Fit the Receiv er Collar Impor tant: The proper fi t and placement of your Receiv er Collar is important for effective training. The Contact Points must ha v e direct contact with your pet’ s skin on the underside of his neck. CAUTION Please read and follow the instructions in this manual. Proper fi t of the collar is import ...

  • Petsafe PIG00-10773 - page 24

    24 Customer Care Center 1-800-732-2677 The Receiver Collar should fi t snugly , y et loose 4. enough to allow one fi nger to fi t between a contact point and your pet’ s neck ( 9B ). Allo w your pet to w ear the collar for sev eral minutes, then re-check the fi t. Check the fi t again as your pet becomes more comfor table with the Receiver C ...

  • Petsafe PIG00-10773 - page 25

    www .petsafe.net 25 T raining Guide Be P atient With Y our P et Impor tant: Proper training of your pet is essential to the success of the P etSafe ® Deluxe Little Dog In-Ground F ence ™ . Read this section completely before beginning to train your pet. Remember tha t the P etSafe ® Deluxe Little Dog In-Ground F ence ™ is not a solid bar r ie ...

  • Petsafe PIG00-10773 - page 26

    26 Customer Care Center 1-800-732-2677 Steps: Begin by walking your pet on a leash in the P et Area. Calmly praise and talk 1. to your pet. Mov e toward the Boundary Flags ( 2. 10A ). Keep your mood happy . With full control of your pet on a leash, walk to the fl ags. As your pet enters the 3. Static Cor rection Zone, the Receiver Collar will begi ...

  • Petsafe PIG00-10773 - page 27

    www .petsafe.net 27 Days 5 thru 8 - Distraction Phase P erform three training sessions per day , each lasting 10 to 15 minutes . Goal: T o train your pet to stay within the P et Area with distractions outside of the P et Area. Setup: Program the Static Correction Level on the Receiver Collar to level 2 or higher • depending on the reaction result ...

  • Petsafe PIG00-10773 - page 28

    28 Customer Care Center 1-800-732-2677 Days 9 thru 14 - Unleashed Super vision T raining sessions should star t at 10-15 minutes, gradually increasing to over an hour. Y our pet is ready for this step only when he clearly avoids the entire Static Correction Zone , regardless of any distractions or temptations . Dur ing this step, do not leav e your ...

  • Petsafe PIG00-10773 - page 29

    www .petsafe.net 29 Accessor ies T o purchase additional accessories for your P etSafe ® Deluxe Little Dog In-Ground F ence ™ , contact the Customer Care Center at 1-800-732-2677 or visit our website a t www .petsafe.net to locate a retailer near you. Component Part Number Battery RFA-188 P ower Adapter for the Fence T ransmitter (USA and Canada ...

  • Petsafe PIG00-10773 - page 30

    30 Customer Care Center 1-800-732-2677 T roubleshooting Receiver Collar is not beeping or correcting. Check battery to make sure it is installed properly and tur ned to the • ON position. P erform Static Correction and Batter y T est (page 17). If Ba ttery Status • LED does not fl ash Green, replace the battery . Check that both lights are lit ...

  • Petsafe PIG00-10773 - page 31

    www .petsafe.net 31 The P ower and Loop Indicator Lights are off . Check that the P ower Adapter is plugged into the Fence T ransmitter. • Check that the Po wer Adapter and/or Surge Protector are plugged • in properly . If the system is plugged into a GFCI or RCD outlet, check to see if the • circuit has been tr ipped. Reset the GFCI or RCD c ...

  • Petsafe PIG00-10773 - page 32

    32 Customer Care Center 1-800-732-2677 System T est The system test is used to determine the cause of system problems that have not been addressed elsewhere in this guide. Y ou will need a 10 foot piece of Boundar y Wire with 3 ⁄ 8 inch of insulation removed from each end to use as a test loop wire. Follow the steps below to perform the system te ...

  • Petsafe PIG00-10773 - page 33

    www .petsafe.net 33 T ransmitter Loop T est (USA and Canada) The T ransmitter Loop T est is a simple test to deter mine the cause of a “Boundary Wire Broken or Disconnected” alar m indication. Y ou will need a shor t 10 foot piece of Boundar y Wire with 3 ⁄ 8 inch of insulation str ipped from both ends. CAUTION The receiver collar should not ...

  • Petsafe PIG00-10773 - page 34

    34 Customer Care Center 1-800-732-2677 Wire Break Loca tion T est Please follow these steps in determining where you hav e a break in y our Boundary Wire: Locate your original splice(s) and verify they have a good, solid connection. 1. Check your yard to determine any possible damage to the Boundary Wire (e.g. recent 2. digging , aerating, rodent b ...

  • Petsafe PIG00-10773 - page 35

    www .petsafe.net 35 Compliance FCC/Canada This Class B digital apparatus complies with Canadian ICES-003. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is ...

  • Petsafe PIG00-10773 - page 36

    Radio Systems ® Corporation 10427 Electric A venue Knoxville, TN 37932 1-800-732-2677 www .petsafe.net Protected by US Pa tents 6,921,089, 7,541,937, and D531,117. Other patents pending. 400-1188/1 ©2007 Radio Systems Corporation Lay out Gr id 3.000" (7.62 cm) Mounting T emplate ...

Fabricant Petsafe Catégorie Pet Fence

Les documents que nous recevons du fabricant de l'appareilPetsafe PIG00-10773 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Petsafe
- manuels d’utilisations PIG00-10773
- fiches produit Petsafe
- dépliants
- ou étiquettes-énergie Petsafe PIG00-10773
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Petsafe PIG00-10773.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Petsafe PIG00-10773, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Petsafe PIG00-10773. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Petsafe PIG00-10773.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Petsafe PIG00-10773, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Petsafe PIG00-10773 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Petsafe PIG00-10773.

Le manuel d’utilisation complet Petsafe, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Petsafe PIG00-10773 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Petsafe PIG00-10773, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lPetsafe PIG00-10773 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Petsafe PIG00-10773 - qui devraient nous aider dans les premières étapes lors de l'utilisation Petsafe PIG00-10773
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Petsafe PIG00-10773
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Petsafe PIG00-10773 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Petsafe PIG00-10773?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Petsafe PIG00-10773, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Petsafe PIG00-10773 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)