Manuel d’utilisation Palsonic PAB-3000

14 pages 0.34 mb
Télécharger

Aller à la page of 14

Summary
  • Palsonic PAB-3000 - page 1

    From Sandwich Breads to Specialty Breads Easy and Delicious - Right at Your Table MODEL PAB-3000 Please take a few minutes to read these instructions before use. By carefully following the instructions, your Auto Bakery will serve you long and well. AUTO BAKERY OWNERS MANUAL ...

  • Palsonic PAB-3000 - page 2

    1. Read all instructions before using the appliance. 2. Do not touch hot surface. 3. To protect against electrical shock do not immerse cord, plugs, or unit in water or other liquid. 4. To prevent injuries or burns, do not insert your hand into appliance when appliance is operating. 5. Close supervision is necessary when any appliance is used by or ...

  • Palsonic PAB-3000 - page 3

    PARTS AND INSTALLATION CONTROL PANEL 3 ...

  • Palsonic PAB-3000 - page 4

    MOUNTING THE INNER POT Place inner pot into main unit with arrow on top rim facing the front and turn clockwise as far as it will turn. Turn counter clockwise to remove. Position the dough blade onto shaft. Make sure interior of oven is cleaned after each use by wiping out with a clean cloth dampened with hot water and mild dish washing liquid. Bef ...

  • Palsonic PAB-3000 - page 5

    It is preferable to take the bread of out of Bread Oven immediately after baking. Keeping bread in the Bread Oven even after the completion of the cycle may affect the bread, causing it to become soggy. When you take bread out of the Bread Oven before the end of the cool down cycle, touch the CLEAR pad to turn the Bread Oven off. The CLEAR pad shou ...

  • Palsonic PAB-3000 - page 6

    Adding Yeast For better baking results, add yeast near the edge of the inner pot. Manual Course for Kneading Only Option The process of making dough ONLY is performed with this course. The Manual Course is used for only making dough which then can be used to make pizza, table rolls, croissants or other breads which will be hand shaped and baked in ...

  • Palsonic PAB-3000 - page 7

    Adding Yeast For better baking results, add yeast near the edge of the inner pot Using the Program Timer to Make Bread or Dough Min. Make sure the inner pot is correctly positioned. Prepare and add the ingredients for the bread or dough you are making as described in your recipe. Max. First add the active dry yeast, then other ingredients into the ...

  • Palsonic PAB-3000 - page 8

    Let the bread cool to room temperature then cut as desired and serve. CAUTION: All metal components of the Bread Oven are extremely hot during and after the baking process. Use oven mitts or a pot holder when handling the inner pot, dough blade or the dough hook. Removing the Bread Turn the inner pot counter clockwise to remove it from the main uni ...

  • Palsonic PAB-3000 - page 9

    SuitabIe Locations SAFETY INSTRUCTIONS Baking Process Do not touch the Bread Oven as the temperature becomes extremely high when the unit starts the baking process, or immediately after baking is done Take special care if infants and children are nearby. Always use oven mitts when taking out fresh-baked bread Be especially careful that flammable ob ...

  • Palsonic PAB-3000 - page 10

    Do not drop or transmit strong shocks to the unit as malfunctions could result. This unit is exclusively designed for bread making. Only use bread making ingredients. Oven Flour, bread crumbs or any foreign matter accumulated in the oven may make it impossible to insert the inner pot. Flour and other substances scattered on the heater may cause som ...

  • Palsonic PAB-3000 - page 11

    CARE OF YOUR BREAD OVEN Inner Pot and Dough Blade Clean these parts thoroughly using a sponge or soft cloth dampened in hot water. After cleaning, dry completely and store inside the main unit. Note: The inner pot and dough blade are fluorine resin-coated. To keep the coating from getting scratched and damaged, do not use hard utensils such as meta ...

  • Palsonic PAB-3000 - page 12

    Is it very hot and or humid? Is the program timer set correctly? Is the Manual course being used? The unit does not start. BEFORE ASKING FOR SERVICE If not, plug the power cord in securely The unit will not operate if the oven's interior temperature is above 50° C - such as immediately after baking is done Open the lidand let the inside cool ...

  • Palsonic PAB-3000 - page 13

    430(W) x 325(D) 330(H) mm SPECIFICATIONS System Auto-blend method 4 Bit 6KB Power supply AC 240V, 50Hz Power consumption 450W Size Weight Weight of bread Approx. 6.5kg (1 4.8 Ibs) Approx. 360g (0.81 Ibs.) Approx. 135(D) x 160(H) mm Size of bread *Specifications subject to change without notice. CPU 13 ...

  • Palsonic PAB-3000 - page 14

    F4565 PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 ...

Fabricant Palsonic Catégorie Bread Maker

Les documents que nous recevons du fabricant de l'appareilPalsonic PAB-3000 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Palsonic
- manuels d’utilisations PAB-3000
- fiches produit Palsonic
- dépliants
- ou étiquettes-énergie Palsonic PAB-3000
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Palsonic PAB-3000.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Palsonic PAB-3000, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Palsonic PAB-3000. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Palsonic PAB-3000.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Palsonic PAB-3000, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Palsonic PAB-3000 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Palsonic PAB-3000.

Le manuel d’utilisation complet Palsonic, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Palsonic PAB-3000 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Palsonic PAB-3000, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lPalsonic PAB-3000 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Palsonic PAB-3000 - qui devraient nous aider dans les premières étapes lors de l'utilisation Palsonic PAB-3000
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Palsonic PAB-3000
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Palsonic PAB-3000 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Palsonic PAB-3000?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Palsonic PAB-3000, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Palsonic PAB-3000 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)