Français dropdown-ico

Manuel d’utilisation Netgear XAV1004

34 pages Non applicable
Télécharger

Aller à la page of 34

Summary
  • Netgear XAV1004 - page 1

    202-10470-01 v1.1 September 2009 NETGEAR , Inc. 350 East Plumeria Drive San Jose, CA 95134 USA XAV1004 Powerline AV Ethernet Adapter User Guide ...

  • Netgear XAV1004 - page 2

    ii v1.1, September 2009 © 2009 by NETGEAR, Inc. All rights reserved. Technical Support Please refer to the support information card that shipped with your product. By registering your product at http:// www.netgear.com/register , we can provide you with faster expert technical support and timely notices of product and software upgrades. NETGEAR, I ...

  • Netgear XAV1004 - page 3

    v1.1, September 2009 iii • Do not push any objects into the openings of your system. Doing so can cause fire or electric shock by shorting out interior components. • Use the product only with approved equipment. • Allow the product to cool before removing covers or touching internal components. • Operate the product only from the type of ex ...

  • Netgear XAV1004 - page 4

    v1.1, September 2009 iv reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment or devices • Connect the equipment to an outlet other than the r ...

  • Netgear XAV1004 - page 5

    v v1.1, September 2009 Contents XAV1004 Powerline AV Ethernet Adapter User Guide About This Manual Conventions, Formats, and Scope ..................................................................................... i How to Print This Manual .................................................................................................. ii Revi ...

  • Netgear XAV1004 - page 6

    vi v1.1, September 2009 Chapter 3 Troubleshooting Product Registration, Support, and Documentation ....................................................... 3-1 Basic Functioning ........................................................................................................... 3-1 Troubleshooting Tips ........................................ ...

  • Netgear XAV1004 - page 7

    i v1.1, September 2009 About This Manual The NETGEAR ® XAV1004 Powerline AV Ethernet Adapter User Guide describes how to install, configure and troubleshoot the XAV1004 Powerline AV Ethernet Adapter. The information in this manual is intended for readers with intermediate computer and Internet skills. Conventions, Formats, and Scope The convention ...

  • Netgear XAV1004 - page 8

    XAV1004 Powerline AV Ethernet Adapter User Guide ii v1.1, September 2009 • Scope . This manual is written for the Powerline AV Ethernet Adapter according to these specifications: How to Print This Manual To print this manual, your computer must have the free Adobe Acrobat reader installed in order to view and print PDF files. The Acrobat reader i ...

  • Netgear XAV1004 - page 9

    1-1 v1.1, September 2009 Chapter 1 Installation and Basic Configuration This chapter describes the XAV1004 Powerline AV Ethernet Adapter and explains how to install it and use the Security button to customize the encryption. For information about using the XAV1004 configuration utility to configure Powerline security or to prioritize Powerline netw ...

  • Netgear XAV1004 - page 10

    XAV1004 Powerline AV Ethernet Adapter User Guide Installation and Basic Configuration 1-2 v1.1, September 2009 How the Powerline AV Ethernet Adapter Fits in Your Network You can use Powerline AV Ethernet Adapters to extend your Ethernet network anywhere in your house using your existing electrical power line. The following figure shows an example o ...

  • Netgear XAV1004 - page 11

    XAV1004 Powerline AV Ethernet Adapter User Guide Installation and Basic Configuration 1-3 v1.1, September 2009 XAV1004 Front View The front view of the XAV1004 is shown in the following illustration: The following table describes the status lights (LEDs) on the front of the XAV1004. Figure 1-2 Table 1-1. XAV1004 LEDs Item Description Ethernet LED ? ...

  • Netgear XAV1004 - page 12

    XAV1004 Powerline AV Ethernet Adapter User Guide Installation and Basic Configuration 1-4 v1.1, September 2009 XAV1004 Rear View The front view of the XAV1004 is shown in the following illustration: Ethernet ports Use these four ports to connect to connect the XAV1004 to peripheral devices, such as gaming consoles, DVD players, internet phones, or ...

  • Netgear XAV1004 - page 13

    XAV1004 Powerline AV Ethernet Adapter User Guide Installation and Basic Configuration 1-5 v1.1, September 2009 XAV1004 Label The label on the rear panel of the XAV1004 contains the items listed below. • Model number • MAC address • Serial number • Device password (PWD) Table 1-2. XAV1004 Ethernet Ports and Buttons Item Description Ethernet ...

  • Netgear XAV1004 - page 14

    XAV1004 Powerline AV Ethernet Adapter User Guide Installation and Basic Configuration 1-6 v1.1, September 2009 Installing Your Powerline AV Ethernet Adapter To prepare for installation: 1. Familiarize yourself with the Powerline AV Ethernet Adapter. The front panel has three lights: Ethernet, Powerline, and Power. The back panel has four Ethernet p ...

  • Netgear XAV1004 - page 15

    XAV1004 Powerline AV Ethernet Adapter User Guide Installation and Basic Configuration 1-7 v1.1, September 2009 If you are not using any streaming media devices, you can use Port 1 for gaming, video, or internet telephones, anything where you do not want a delay or interruption. Whatever Port 1 doesn’t use is available for Port 2. • Port 2 (ligh ...

  • Netgear XAV1004 - page 16

    XAV1004 Powerline AV Ethernet Adapter User Guide Installation and Basic Configuration 1-8 v1.1, September 2009 2. When all peripheral devices are connected, connect the XAV1004 power cord into the unit and into a power outlet. 3. Wait up to 80 seconds for the XAV1004 to be recognized by the Powerline network. ...

  • Netgear XAV1004 - page 17

    2-1 v1.1, September 2009 Chapter 2 Securing and Configuring Your Powerline Network This chapter describes Powerline network security, and describes how to use the XAV1004 Powerline Utility. You can use the Powerline Utility to configure encryption for your Powerline network and to check the link rate of traffic passing through the Powerline network ...

  • Netgear XAV1004 - page 18

    XAV1004 Powerline AV Ethernet Adapter User Guide Securing and Configuring Your Powerline Network 2-2 v1.1, September 2009 Changing the Default Encryption Key using Push 'N' Secure Push 'N' Secure lets you set the default encryption key on each Powerline device in your Powerline network. To set the encryption key for each device, ...

  • Netgear XAV1004 - page 19

    XAV1004 Powerline AV Ethernet Adapter User Guide Securing and Configuring Your Powerline Network 2-3 v1.1, September 2009 You should install this utility if you want to do any of the following: • Set your own unique Powerline network encryption key • Check the link rate of traffic passing through the Powerline network. • Enable or disable the ...

  • Netgear XAV1004 - page 20

    XAV1004 Powerline AV Ethernet Adapter User Guide Securing and Configuring Your Powerline Network 2-4 v1.1, September 2009 • Select the CD drive, and click the Autorun.exe executable file. 2. Click Next , and follow the wizard prompts. When the wizard is done, it informs you that it has finished installing the utility on your computer. 3. Click Fi ...

  • Netgear XAV1004 - page 21

    XAV1004 Powerline AV Ethernet Adapter User Guide Securing and Configuring Your Powerline Network 2-5 v1.1, September 2009 1. On the Main tab, click the device name for a remote Powerline device to highlight it. 2. Click Factory Reset , and a confirmation message displays. 3. Click OK to reset the device. A message indicates whether or not the opera ...

  • Netgear XAV1004 - page 22

    XAV1004 Powerline AV Ethernet Adapter User Guide Securing and Configuring Your Powerline Network 2-6 v1.1, September 2009 Running the Powerline Utility You can start the Powerline Utility by clicking the NETGEAR Powerline Utility icon on your desktop, or from the Windows Program menu. The Powerline Utility displays its Main tab: Note the message at ...

  • Netgear XAV1004 - page 23

    XAV1004 Powerline AV Ethernet Adapter User Guide Securing and Configuring Your Powerline Network 2-7 v1.1, September 2009 Powerline Security Tab Use the Powerline Security tab to do the following: • Changing the Network Encryption Key • Adding a Device to a Powerline Network • Adding a Device from a Locally Connected Computer • Adding a Dev ...

  • Netgear XAV1004 - page 24

    XAV1004 Powerline AV Ethernet Adapter User Guide Securing and Configuring Your Powerline Network 2-8 v1.1, September 2009 Changing the Network Encryption Key You can change the network encryption key from the Security tab: 1. To change the encryption key for a remote device, you must enter the password for the device. The password is printed on the ...

  • Netgear XAV1004 - page 25

    XAV1004 Powerline AV Ethernet Adapter User Guide Securing and Configuring Your Powerline Network 2-9 v1.1, September 2009 3. Enter the device password in the Set Device Password window: The device password is on the product label. 4. Click OK . 5. Type the network encryption key into the Apply the Encryption Key Setting field, and click Set Selecte ...

  • Netgear XAV1004 - page 26

    XAV1004 Powerline AV Ethernet Adapter User Guide Securing and Configuring Your Powerline Network 2-10 v1.1, September 2009 Adding a Device from a Locally Connected Computer Follow these steps: 1. Plug the new Powerline AV Ethernet Adapter into an available AC power outlet. Connect the Ethernet cable that came with the adapter to the adapter’s Eth ...

  • Netgear XAV1004 - page 27

    XAV1004 Powerline AV Ethernet Adapter User Guide Securing and Configuring Your Powerline Network 2-11 v1.1, September 2009 Returning to the Default Network Encryption Key Follow these steps: 1. Plug the new device into an AC power outlet. 2. Start the XAV1004 Configuration Utility and wait for the utility to detect the devices in your Powerline net ...

  • Netgear XAV1004 - page 28

    XAV1004 Powerline AV Ethernet Adapter User Guide Securing and Configuring Your Powerline Network 2-12 v1.1, September 2009 5. Select the Main tab, and then click Scan . Check that all devices are detected with your network encryption key. Prioritizing Traffic on the Powerline Network (QoS) You can prioritize data traffic on your Powerline network b ...

  • Netgear XAV1004 - page 29

    XAV1004 Powerline AV Ethernet Adapter User Guide Securing and Configuring Your Powerline Network 2-13 v1.1, September 2009 5. (Optional) Select TOS Bits, and select the priorities for each TOS bit from the drop down lists. 6. Click Apply to set the QoS priority for the selected device. Powerline Utility Logs The Log tab shows system information and ...

  • Netgear XAV1004 - page 30

    3-1 v1.1, September 2009 Chapter 3 Troubleshooting This chapter gives information about troubleshooting your XAV1004 Powerline AV Ethernet Adapter. Product Registration, Support, and Documentation Register your product at http://www.netgear.com/register . Registration is required before you can use our telephone support service. Product updates and ...

  • Netgear XAV1004 - page 31

    XAV1004 Powerline AV Ethernet Adapter User Guide Troubleshooting 3-2 v1.1, September 2009 Troubleshooting Tips The following table lists problems and recommendations. Problems After Changing Network Encryption Key If your Powerline devices stopped communicating after you used the NETGEAR XAV1004 Configuration Utility to change the network encryptio ...

  • Netgear XAV1004 - page 32

    XAV1004 Powerline AV Ethernet Adapter User Guide Troubleshooting 3-3 v1.1, September 2009 1. Open the XAV1004 Powerline Utility and select the Security tab. 2. Select the local device. 3. For each remote device, enter its password (printed on the product label), and then select it. 4. Click the Use Default (Public Network) button, and then click th ...

  • Netgear XAV1004 - page 33

    Technical Specifications A-1 v1.1, September 2009 Appendix A Technical Specifications This appendix provides technical specifications for the XAV1004 Powerline AV Ethernet Adapter. Network Protocol and Standards Compatibility Data and Routing Protocols: IEEE 802.3 (10BASE-T), IEEE 802.3u (100BASE-Tx) Power Power Consumption: 110VAC/60Hz, 5W Max. 22 ...

  • Netgear XAV1004 - page 34

    XAV1004 Powerline AV Ethernet Adapter User Guide Technical Specifications A-2 v1.1, September 2009 Modulation type: OFDM symbol modulation Electromagnetic Emissions Meets requirements of: FCC Part 15 Class B; CE-EMC Class B; 3-home FCC Certificate Safety Agency Approvals Meets requirements of: UL 60950 /cUL IEC60950; CE LVD; TUV CB ...

Fabricant Netgear Catégorie Powerline adapter

Les documents que nous recevons du fabricant de l'appareilNetgear XAV1004 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Netgear
- manuels d’utilisations XAV1004
- fiches produit Netgear
- dépliants
- ou étiquettes-énergie Netgear XAV1004
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Netgear XAV1004.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Netgear XAV1004, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Netgear XAV1004. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Netgear XAV1004.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Netgear XAV1004, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Netgear XAV1004 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Netgear XAV1004.

Le manuel d’utilisation complet Netgear, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Netgear XAV1004 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Netgear XAV1004, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lNetgear XAV1004 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Netgear XAV1004 - qui devraient nous aider dans les premières étapes lors de l'utilisation Netgear XAV1004
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Netgear XAV1004
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Netgear XAV1004 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Netgear XAV1004?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Netgear XAV1004, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Netgear XAV1004 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)