Français dropdown-ico

Manuel d’utilisation Kenmore 119.1643301

31 pages 7.68 mb
Télécharger

Aller à la page of 31

Summary
  • Kenmore 119.1643301 - page 1

    Use & Care Guide ® Liquid Propane Gas Grill Sears Model No: 119.16433010 Safety Parts Use and Care Assembly Espa_ol, Pg. 30 This Grill is for Outdoor Use Only • Read and follow all Safety, Assembly, and Use & Care Instructions in this Guide before assembling and cooking with this grill. • Failure to follow all instructions in this Use ...

  • Kenmore 119.1643301 - page 2

    Primary Safety Warnings. .................................. 1-3 Warranty Information ............................................ 2 Pre-Assembly instructions .................................... 3 Part Diagram and Lists ...................................... 4-7 Assembly Instructions ..................................... 8-18 Use & Care Instruc ...

  • Kenmore 119.1643301 - page 3

    DO NOT light this grill without first reading the Lighting Instructions. DO NOT light this grill without checking the burner tubes for blockage that could have occurred during shipment. See the Cleaning and Maintenance Instructions. The installation must conform with local codes or, in the absence of local codes, with either the National Fuel Gas C ...

  • Kenmore 119.1643301 - page 4

    A Phillips Head Bolt M6×35mm Qty: 4 pcs F Phillips Head Screwdriver Qty: 1 pc lm B Phillips Head Bolt M6x16mm Qty: 24 pcs Battery Size AA Qty: 1 pc G C Phillips Head Bolt M6xl0mm Qty: 4 pcs Cabinet Door Stop Qty: 1 pc H D Phillips Head Bolt M4×Smm Qty: 22 pcs "S" Hook Qty: 3 pcs Plastic Washer M6 Qty: 8 pcs E Washer M4 Qty: 4 pcs ...

  • Kenmore 119.1643301 - page 5

    Key Qty Part No. Description A1 1 *ASMA0085-01 Hood Assembly A2 2 *ASMA0014-03 Hood Bolt Assembly A3 1 CA0046-001 Hood Handle Seat Assebmly A4 2 FLPP0114 Hood Handle Heat Insulator A5 1 SE0213 Thermometer A6 1 CA0045-002 Thermometer Seat A7 1 *ASMA0014-05 Hood Handle B1 1 *ASMB0085-01 Firebox Assembly B2 1 SC1020 Gas Manifold Assembly B3 1 *ASMB008 ...

  • Kenmore 119.1643301 - page 6

    Key Qty Part No. C2 1 $7004-042D-001 C3 1 $7001-042D-017 C4 1 *ASMD0085-01 C5 1 *ASMD0085-02 C6 1 PLABS0090-001 C7 1 PLABS0103-001 C8 1 S7005-F00B-026 C9 1 *ASMC0012-08 C10 1 SE0084-012 Cll 1 *ASMD0085-03 C12 1 SE0083 C13 2 SB0045-001 D1 1 $7002-042D-005 D2 1 *ASMD0085-02 D3 1 $7005-000B-027 D4 1 *ASMC0012-08 D5 3 SE0123-002 E1 1 *ASMC0085-01 E2 2 ...

  • Kenmore 119.1643301 - page 7

    _----( ...

  • Kenmore 119.1643301 - page 8

    Remove Firebox from Cabinet [] Cut fastening straps on Cabinet Toe Plate. Remove the Toe Plate and set aside. Cut fastening straps securing regulator and hose to cabinet. [] Unscrew and discard the 8 Phillips Head Bolts (M6x35mm) and 8 Washers (M6) from the corner holes of the cabinet. Remove the crossbar and set aside. [] With the aid of an assist ...

  • Kenmore 119.1643301 - page 9

    Install Cabinet Toe Plate [] Attach the Cabinet Toe Plate to the Cabinet Bottom Panel using 4 Phillips Head Bolts (M6xl0mm), [] Place cabinet in upright position on casters, Phillips Head Bolt M6xl0mm Qty: 4 Install Cabinet Doors and Cabinet Front Crossbar [] Insert the Cabinet Right Door bottom pin into the Cabinet Bottom Panel (Inset 1), and inse ...

  • Kenmore 119.1643301 - page 10

    Hang Condiment Basket and attach Cabinet Door Stop [] Attach the Cabinet Door Stop to the front of cabinet bottom using 2 Phillips Head Bolts (M4x8mm), [] Hang Condiment Basket on the inside of Cabinet Right Door, Phillips Head Bolt M4x8mm Qty: 2 Cabinet Door Stop Qty: 1 /. Attach Firebox to Cabinet [] With the aid of an assistant, place the Firebo ...

  • Kenmore 119.1643301 - page 11

    Install Grease Tray [] Insert the Grease Tray along two sides of the Firebox from the back underneath the firebox. Insert tray with the grease drain hole positioned as shown. Be careful when sliding the tray past wires and fuel line. Slide tray fully in until it locks into place behind stops. ............. I, Grease drain hole Install Grease Pan Br ...

  • Kenmore 119.1643301 - page 12

    Install Side Shelf Upper and Lower Front Panels [] Attach the Side Shelf Upper Front Panel to Side Shelf Frame using 3 Phillips Head Bolts (M4xSmm), [] Attach the Side Shelf Lower Front Panel to Side Shelf Upper Front Panel using 3 Phillips Head Bolts (M4x8mm), Phillips Head Bolt M4x8mm qty: 6 I_l Install Towel Bar Handle, "S" Hooks [] Sl ...

  • Kenmore 119.1643301 - page 13

    Znstall Side Burner Upper and Lower Control Panels [] Attach the Side Burner Upper Control Panel to Side Burner Frame using 3 Phillips Head Bolts (M4xSmm), [] Attach the Side Burner Lower Control Panel to Side Burner Frame using 3 Phillips Head Bolts (M4xSmm), Phillips Head Bolt M4x8mm qty: 6 Znstall Towel Bar Handle [] Use 2 Phillips Head Bolts (M ...

  • Kenmore 119.1643301 - page 14

    Install Side Shelf Frame to Firebox [] Unscrew the 2 Phillips Head bolts ¼ inch from the upper left and right corner holes in the right side of the firebox as shown in Inset 1. The bolts extending out of the firebox sides are to attach the side shelf frame. [] Slide the upper holes of the side shelf frame over the heads of the 2 Phillips Head Bolt ...

  • Kenmore 119.1643301 - page 15

    Install Side Burner Frame to Firebox [] Unscrew the 2 Phillips Head bolts 1/4 inch from the upper left and right corner holes in the left side of the firebox as shown in Inset 1. The bolts extending out of the firebox sides are to attach the side Burner frame. [] Slide the upper holes of the side Burner frame over the heads of the 2 Phillips Head B ...

  • Kenmore 119.1643301 - page 16

    Install Side Burner Valve [] Detach side burner ignition wire from the regulator hose. Feed side burner valve and igniter wire through hole in left side of cabinet. [] Open side burner lid and cut tie wrap securing grate to pan. On underside of pan, remove the 2 screws holding the side burner in place. See Inset 1. [] Secure the side burner valve s ...

  • Kenmore 119.1643301 - page 17

    Install Heat Diffusers, Cooking Grates, Warming Rack [] Insert the heat diffusers into the firebox by placing them into the indentations in the front and back of the firebox. See Inset 1. [] Place the Cooking Grates into the firebox. The grate bottoms have a small knob on each corner. See Inset 2. [] Insert the warming rack into the top of the fire ...

  • Kenmore 119.1643301 - page 18

    Install Battery [] Unscrew the electronic ignition button. Place the AA Battery into the ignition with the positive (+) end facing out. Screw the electronic ignition button back into place. Battery Size AA Qty: 1 Congratulations - Assembly is now complete! [] Remove any additional labels or packing material from the grill except the CSA label. Be s ...

  • Kenmore 119.1643301 - page 19

    CORRECT LP GAS TANK USE • LP gas grill models are designed for use with a standard 20lb. (9.1kg) Liquid Propane Gas (LP Gas) tank, which is not included with the grill. Never connect your gas grill to an LP gas tank that exceeds this capacity. A tank of approximately 12" (305mm) in diameter by 18-1/2" (472mm) high is the maximum size LP ...

  • Kenmore 119.1643301 - page 20

    Notes about LP Gas Tank Exchange Programs Many retailers that sell grills offer you the option of replacing your empty LP gas tank through an exchange service. Use only those reputable exchange companies that inspect, precision fill, test and certify their tanks. Exchange your tank only for an OPD safety feature equipped tank as described in the LP ...

  • Kenmore 119.1643301 - page 21

    Flow Limiting Valves on LP Gas Tanks Check all connections for LP Gas Leaks Your LP gas tank is equipped with a flow limiting valve that will restrict the flow of gas due to a sudden change in pressure. This can often activate without your knowledge. You will notice among other things that your grill does not get as hot as it should, will take long ...

  • Kenmore 119.1643301 - page 22

    Grill Lighting Instructions 1. Before each use, check all hoses for cracks, nicks, cuts, or abrasions. If a hose is damaged in any way, do not use your grill before replacing the hose with an authorized part from the Parts List. Also make sure all gas supply connections are securely tightened. 2. Familiarize yourself with the Safety and Use and Car ...

  • Kenmore 119.1643301 - page 23

    MANUALLY LIGHTING THE BURNERS WITH THE MATCH HOLDER MANUALLY LIGHTING THE SIDE BURNER OR THE ROTISSERIE BURNER 1. Open the lid 1. Open the grill lid or side burner cover. 2. Ensure all burners are in the "OFF" position. 3. Slowly turn on the gas at the LP cylinder valve if it is not already on. 2, Ensure the control knob is in the "O ...

  • Kenmore 119.1643301 - page 24

    Troubleshooting If the grill fails to light: 1. Turn gas off at source and turn control knobs to "OFF". Wait at least 5 minutes for gas to clear, and then retry 2. If your grill still fails to light, check the gas supply and connections. Ensure gas supply is turned on (turn counterclockwise), there is gas in the tank, and the regulator is ...

  • Kenmore 119.1643301 - page 25

    Proper care and maintenance will keep your grill in good operating condition and prolong its life. Follow these cleaning procedures on a timely basis and your grill will stay clean and operate with minimum effort. CAUTION: Be sure your grill is off and cool before cleaning, and always wear protective gloves when cleaning your grill. down over each ...

  • Kenmore 119.1643301 - page 26

    Toreduce the chance of FLASHBACK FTRE you must clean the burner tubes as follows periodically in summer and fall, wherever spiders are active in your area, and if your grill has not been used for an extended period of time. 1. Turn all burner control knobs to the "OFF" position. 2. Turn the LP gas tank valve to the "OFF" positio ...

  • Kenmore 119.1643301 - page 27

    Burn-Off Some of the new parts of your grill could have residual oils. We recommend you ignite the burners, turn to "Hi", and lower the lid for 3 to 5 minutes to burn any oils off before grilling for the first time. CAUTION: Operating your grill on the "Hi" setting for longer than fifteen minutes may damage certain parts of your ...

  • Kenmore 119.1643301 - page 28

    Question: Can I convert my gas grill from one fuel type to another, such as LP to NG (natural gas) or vice versa? Answer: No, your gas grill is manufactured to specific standards developed by CSA and ANSI for your safety and is certified for one type of gas only. Question: Are the serial and model numbers of my grill listed somewhere for reference? ...

  • Kenmore 119.1643301 - page 29

    Question: Where do I use my grill for safer operation and better performance? Answer: Strong winds and low temperatures can affect the heating and performance of your gas grill so factor in these elements when positioning your grill outdoors for cooking. Use your grill at least 3 feet away from any wall or surface. Use your grill at least 3 feet aw ...

  • Kenmore 119.1643301 - page 30

    Congratulations on making a smartpurchase. Your new Kenmore <R_ product is designed and manufactured for years of dependable operation. But likeall products, it may require repair fromtime to time. That's when having a Repair Protection Agreement can save you money andaggravation. Here's what the Repair Protection Agreement* includes: ...

  • Kenmore 119.1643301 - page 31

    Your Home For exped troubleshooting and home solutions advice: ++++++++++++++++++++ a n a 9 ÷ www,managemyhome,com For repair- in your home- of al! major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For,the replacement pads, accessories and owner s manuals that you need ...

Fabricant Kenmore Catégorie Gas Grill

Les documents que nous recevons du fabricant de l'appareilKenmore 119.1643301 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Kenmore
- manuels d’utilisations 119.1643301
- fiches produit Kenmore
- dépliants
- ou étiquettes-énergie Kenmore 119.1643301
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Kenmore 119.1643301.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Kenmore 119.1643301, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Kenmore 119.1643301. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Kenmore 119.1643301.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Kenmore 119.1643301, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Kenmore 119.1643301 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Kenmore 119.1643301.

Le manuel d’utilisation complet Kenmore, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Kenmore 119.1643301 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Kenmore 119.1643301, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lKenmore 119.1643301 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Kenmore 119.1643301 - qui devraient nous aider dans les premières étapes lors de l'utilisation Kenmore 119.1643301
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Kenmore 119.1643301
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Kenmore 119.1643301 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Kenmore 119.1643301?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Kenmore 119.1643301, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Kenmore 119.1643301 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)