Français dropdown-ico

Manuel d’utilisation Eiki LC-XB42

71 pages 5.57 mb
Télécharger

Aller à la page of 71

Summary
  • Eiki LC-XB42 - page 1

    Multimedia Projector Owner's Manual LC-XB42 MODEL ...

  • Eiki LC-XB42 - page 2

    2 Features and Design This Multimedia Projector is designed with the most advanced technology for portability , durability , and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology . ◆ Compact Design This projector is designed compact in size and ...

  • Eiki LC-XB42 - page 3

    3 T able of Contents T rademarks Each name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation. Features and Design . . . . . . . . . . . . . . . . . . .2 T able of Contents . . . . . . . . . . . . . . . . . . . . . . 3 T o t h e O w n e r .......................... 4 Safety Instruc ...

  • Eiki LC-XB42 - page 4

    4 T o the Owner C A UT IO N: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE P ARTS INSIDE EXCEPT LAMP REPLACEMENT . REFER SERVICING T O QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICA TES THA T DANGEROUS VOL T AGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT . THIS SYMBOL INDICA TES THA ...

  • Eiki LC-XB42 - page 5

    5 Safety Instructions All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. F o l l o w a l l w a r n i n g s a n ...

  • Eiki LC-XB42 - page 6

    6 Safety Instructions Openings in the cabinet are provided for ventilation. T o ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. CAUTION Hot air is exhausted from the exhaust vent. When using or installing the projector , the following precautions should be taken. – Do not ...

  • Eiki LC-XB42 - page 7

    7 Safety Instructions Safety Instructions Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident or fire hazard. This projector can project the picture upward, downward, or backward, perpendicular to the plane of the screen as shown in the figure below . Bottom Downward (Usual) ...

  • Eiki LC-XB42 - page 8

    8 Compliance Federal Communications Commission Notice Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and ...

  • Eiki LC-XB42 - page 9

    9  Kensington Security Slot This slot is for a Kensington lock used to deter theft of the projector . * Kensington is a registered trademark of ACCO Brands Corporation. Bottom Back ① Infrared Remote Receiver ② Focus Ring ③ Projection Lens 　 ④ Zoom Lever ⑤ Slide Shutter ⑥ T op Controls and Indicators ⑦ Air Intake V ent ⑧ Exhaust ...

  • Eiki LC-XB42 - page 10

    10 Part Names and Functions Rear T erminal ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑨ S-VIDEO IN Connect the S-VIDEO output signal from video equipment to this jack (p.17). ⑥ AUDIO IN Connect the audio output signal from video equipment connected to ⑤ or ⑨ to this jack. For a mono audio signal (a single audio jack), connect it to the L (MONO) ja ...

  • Eiki LC-XB42 - page 11

    1 1 Part Names and Functions T op Control ① ② ④ ⑥ ⑦ ⑧ ① LAMP REPLACE indicator Lights yellow when the projection lamp reaches its end of life (pp.57, 65). ⑦ w ARNING indicator – Lights red when the projector detects an abnormal condition. – Blinks red when the internal temperature of the projector exceeds the operating range (pp ...

  • Eiki LC-XB42 - page 12

    12 Part Names and Functions T o ensure safe operation, please observe the following precautions : – Do not bend, drop the remote control or expose the remote control to moisture or heat. – For cleaning, use soft dry cloth. Do not apply benzene, thinner , splay or any chemical material. ⑤ ③ ⑨ ⑬ ④ ⑭ ⑫ ① ON/ST AND-By button T urn t ...

  • Eiki LC-XB42 - page 13

    13 Part Names and Functions Adjustable Feet P o i n t th e r e m o t e co n t r o l t o w ar d t h e p r o j ec t o r ( I n f r a re d Remote Receiver) when pressing the buttons. Maximum operating range for the remote control is about 16.4'(5 m) and 60 degrees in front of the projector . Remote Control Operating Range Projection angle can be a ...

  • Eiki LC-XB42 - page 14

    14 Positioning the Projector For projector positioning, see the figures below . The projector should be set perpendicularly to the plane of the screen.  Notes: • The brightness in the room has a great influence on picture quality . It is recommended to limit ambient lighting in order to obtain the best image. • All measurements are approxima ...

  • Eiki LC-XB42 - page 15

    15 Installation Connecting the AC Power Cord This projector uses nominal input voltages of 100-120 V or 200–240 V AC and it automatically selects the corr ect input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor . T o reduce the risk of electrical shock, do not plug into any other type of power ...

  • Eiki LC-XB42 - page 16

    16 Installation Connecting to a Computer   Cables used for connection • VGA Cable (Mini D-sub 15 pin)* • Audio Cables (*One cable is supplied; other cables are not supplied with the projector .) External Audio Equipment Audio cable (stereo) Audio Output COMPUTER /COMPONENT AUDIO IN AUDIO OUT (stereo) Audio Input COMPUTER IN 1  Notes: ? ...

  • Eiki LC-XB42 - page 17

    17 Installation Connecting to V ideo Equipment Cables used for connection • Video and Audio Cable (RCA x 3) • S-VIDEO Cable • Audio Cable (Cables are not supplied with the projector .) External Audio Equipment Audio cable (stereo) VIDEO S-VIDEO S-video cable Video and audio cable Composite Video and Audio Output S-video Output AUDIO IN Audio ...

  • Eiki LC-XB42 - page 18

    18 Installation Connecting to Component V ideo Equipment Cables used for connection • Audio Cables • Scart-VGA Cable • Component Cable • Component-VGA Cable (Cables are not supplied with the projector .) External Audio Equipment Audio cable (stereo) Audio cable (stereo) Audio Input Component Video Output (Y , Pb/Cb, Pr/Cr) RGB Scart 21-pin ...

  • Eiki LC-XB42 - page 19

    19 The preparation display will disappear after 30 seconds. (See page 49 for Lamp control status.) Lamp control status T urning On the Projector Connect the projector ’s AC power cord into an AC outlet. The POWER indicator lights red. Open the slide shutter (see pages 9,56). Press the ON/ST AND-BY button on the top control or on the remote contro ...

  • Eiki LC-XB42 - page 20

    20 TO MAINT AIN THE LIFE OF THE LAMP , ONCE YOU TURN THE PROJECTOR ON, WAIT A T LEAST FIVE MINUTES BEFORE TURNING IT OFF . “Power off?” disappears after 4 seconds. T urning Off the Projector Press the POWER ON/ST AND-BY button on the top control or on the remote control, and “Power off?” appears on the screen. Press the POWER ON/ST AND-BY b ...

  • Eiki LC-XB42 - page 21

    21 Basic Operation How to Operate the On-Screen Menu Use the Point ◄► buttons to select a Menu icon. Use the Point ▲▼ buttons to select an item in the selected menu. Press the SELECT button to show the item data. Use the Point ◄► buttons to adjust the values. T o close the On-Screen Menu, press the MENU button again. Press the MENU butt ...

  • Eiki LC-XB42 - page 22

    22 Menu Bar For detailed functions of each menu, see “Menu T ree” on pages 63-64. Basic Operation PC System Menu Used to select computer system. (p.28) Image Adjust Menu Used to adjust computer image. [Contrast / Brightness / Color temp. / White balance (R/G/B)/ Sharpness / Gamma] (pp.33, 34) Setting Menu Used to set the projector's operat ...

  • Eiki LC-XB42 - page 23

    23 Basic Operation Rotate the Zoom Lever to zoom in and out. Rotate the Focus Ring to adjust the focus of the image. Zoom and Focus Adjustment If a projected picture still has keystone distortion after pressing the AUTO SETUP button on the top control, correct the image manually as follows: Press the KEYSTONE button on the top control or on the rem ...

  • Eiki LC-XB42 - page 24

    24 Sound Adjustment 1 2 Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the Sound Menu icon. Press the VOLUME+/– buttons on the top control or on the remote control to adjust the volume. The volume dialog box appears on the screen for a few seconds. Press the MUTE button on the re ...

  • Eiki LC-XB42 - page 25

    25 Basic Operation Basic Operation Remote Control Operation Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu. Press the COMPUTER or VIDEO button on the remote control to select the input source. See page ...

  • Eiki LC-XB42 - page 26

    26 Basic Operation black out  the captured image  normal  • • • • • Press the NO SHOW button on the remote control to black out the image. T o restore to normal, press the NO SHOW button again or press any other button. When a projected image is captured and set as “User” in the Logo selection (p.45), the screen changes each ...

  • Eiki LC-XB42 - page 27

    27 Computer Input Choose either Computer 1 or Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control. Before using these buttons, correct input source should be selected through Menu operation as described below . Press the MENU button to display the On-Screen Menu. Press the Point ◄► b utt ...

  • Eiki LC-XB42 - page 28

    28 Computer Input The Auto PC Adjustment function operates to adjust the projector . PC System Menu The PC System Menu icon Selected system is displayed. Systems in this dialog box can be selected. PC System Menu Customized Mode (1–5) set in the PC Adjust Menu (pp.30–31). Computer System Selection This projector automatically tunes to various t ...

  • Eiki LC-XB42 - page 29

    29 Computer Input Auto PC Adjustment function is provided to automatically adjust Fine sync, T otal dots, Horizontal and V ertical positions to conform to your computer . Move the red frame pointer to Auto PC Adj. and press the SELECT button. “Please wait...” appears while the Auto PC adjustment is in process. PC Adjust Menu PC Adjust Menu icon ...

  • Eiki LC-XB42 - page 30

    30 Computer Input PC Adjust Menu Manual PC Adjustment Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector . Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has five independent memory areas to store those parameters manually a ...

  • Eiki LC-XB42 - page 31

    31 Computer Input V acant Val u e s o f “ T o t a l d o t s ” , “Horizontal”, “V ertical”, “Display area H”, and “Display area V”. Close this dialog box. T o store adjusted data T o clear adjusted data This Mode has stored parameters. Move the red frame pointer to the desired item and press the SELECT button. Use the Point ◄? ...

  • Eiki LC-XB42 - page 32

    32 Computer Input Move the red frame pointer to t h e d e s i r e d i m ag e m o d e a n d press the SELECT button. The selected image mode is check marked. Image Select Menu Normal picture mode preset on the projector . Standard Picture mode with improved halftone for graphics. Real For the image projected on a blackboard. See above for further de ...

  • Eiki LC-XB42 - page 33

    33 Computer Input Use the Point ◄► buttons to adjust the setting value. Move the red frame pointer to the desired item and then press the SELECT button. Image Adjust Menu Image Adjust Menu icon Selected Image mode Image Adjustment Reset Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame point ...

  • Eiki LC-XB42 - page 34

    34 Computer Input Store Exit the Image Adjust Menu. Quit Store icon T o store the adjusted data, select Store and press the SELECT button. Use the Point ▲▼ buttons to select one from Image 1 to 4 and press the SELECT button. A confirmation box appears and then select [Y es]. Stored data can be called up by selecting an “Image (1–4)” in th ...

  • Eiki LC-XB42 - page 35

    35 Computer Input Select Digital zoom +. The On-Screen Menu disappears and “D. zoom +” appears. Press the SELECT button to expand the image size. Use the Point ▲▼◄► butto ns t o p an t he image. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D.ZOOM ...

  • Eiki LC-XB42 - page 36

    36 Input Source Selection (V ideo, S-video) V ideo Input C h oo s e V i d eo by p r e s s in g t h e I N P U T b u t t o n o n t h e t o p control or the VIDEO button on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below . Press the MENU button to display the On-Screen M ...

  • Eiki LC-XB42 - page 37

    37 V ideo Input Choose Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control. Before using these buttons, correct input source should be selected through Menu operation as described below . 1 U s e th e P o i nt ▲ ▼ buttons to move the red arrow pointer to Computer 2 and then press the SEL ...

  • Eiki LC-XB42 - page 38

    38 V ideo Input V ideo System Selection Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the A V System Menu icon. 1 A V System Menu (V ideo or S-Video) A V System Menu (Component) Use the Point ▲▼ buttons to move the red arrow pointer to the desired system and then press the SEL ...

  • Eiki LC-XB42 - page 39

    39 V ideo Input Move the red frame pointer to the desired image mode and press the SELECT button. The selected image mode is check marked. Image Select Menu Standard Cinema Blackboard(Green) For viewing with the user preset image mode in the Image Adjust Menu (pp. 40–41). Image1–4 Image Select Menu icon Select the desired image mode from among ...

  • Eiki LC-XB42 - page 40

    40 V ideo Input Image Adjustment Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the Image Adjust Menu icon. 1 2 Use the Point ▲ ▼ buttons to move the red frame pointer to the desired item and then press the SELECT button to display the adjustment dialog box. Use the Point ◄? ...

  • Eiki LC-XB42 - page 41

    41 V ideo Input Use the Point ◄► buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15). Gamma Press the Point ◄ button to decrease the sharpness of the image; press the Point ► button to increase the sharpness of the image (from 0 to 15). Sharpness An interlaced video signal can be displayed in progressive ...

  • Eiki LC-XB42 - page 42

    42 V ideo Input This projector has the picture screen resize function, which enables you to customize the image size. Normal Screen Size Adjustment Screen Menu Press the MENU button to display the On-Screen Menu. Use the Point ◄ ► buttons to move the red frame pointer to the Screen Menu icon. 1 Use the Point ▲ ▼ buttons to move the red fram ...

  • Eiki LC-XB42 - page 43

    43 Language The language used in the On-Screen Menu is available in English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Finnish, Polish, Hungarian, Romanian, Russian, Chinese, Korean, and Japanese. Set the red frame pointer to the item and press the SELECT button. Press the SELECT button at Language, then the Language Menu appear ...

  • Eiki LC-XB42 - page 44

    44 Setting Display Blue back When this function is “On,” a blue image is displayed while the input signal is not detected. Keystone This function is used to store or reset the keystone correction when the AC power cord is unplugged. Use the Point ◄► buttons to switch between each option. Stor e ..... ... Keep the keystone correction even wh ...

  • Eiki LC-XB42 - page 45

    45 Setting Select [Y es] to capture the projected image. Select [Y es] to stop capturing. Capture Logo (Logo and Logo PIN code lock settings) Logo select This function allows you to customize the screen logo with Logo select, Capture, and Logo PIN code lock functions.  Note: • When “On” is selected in the Logo PIN code lock function, Logo ...

  • Eiki LC-XB42 - page 46

    46 Logo PIN code lock Setting This function prevents an unauthorized person from changing the screen logo. Off ............ The screen logo can be changed freely from the Logo Menu (p.45). On ............ The screen logo cannot be changed without a Logo PIN code. If you want to change the Logo PIN code lock setting, press the SELECT button and the ...

  • Eiki LC-XB42 - page 47

    47 Setting Ceiling Rear Ceiling When this function is set to “On,” the picture will be top/ bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector . Rear When this function is set to “On,” the picture will be left/right reversed. This function is used to project the image from rear of the ...

  • Eiki LC-XB42 - page 48

    48 Setting Power management T ime left before Lamp is off. Power management For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not operated for a certain period. If the input signal is interrupted and no button is pressed for m o re t h an 3 0 se c o ...

  • Eiki LC-XB42 - page 49

    49 Setting This function allows you to change brightness of the screen. Auto ........... The brightness according to the input signal (between High and Eco mode). High ........... Brighter than the Normal mode. Normal ....... Normal brightness Eco ............ Lower brightness reduces the lamp power consumption and extends the lamp life. Lamp contr ...

  • Eiki LC-XB42 - page 50

    50 Setting Key lock Key lock Security (Key lock and PIN code lock) PIN code lock PIN code lock This function locks the top control and remote control buttons to prevent operation by unauthorized persons. ..... Unlocked. ..... Lock the operation of the top control. T o unlock, use the remote control. ..... Lock the operation of the remote control. T ...

  • Eiki LC-XB42 - page 51

    51 Setting Change the PIN code lock setting Use the Point ◄► buttons to switch between the options. Use the Point ◄► buttons to select Off, On1, or On2 and then move the pointer to “Quit” with the Point ▼ button. Press the SELECT button to close the dialog box. Change the PIN code lock setting Enter a PIN code Use the Point ▲▼ but ...

  • Eiki LC-XB42 - page 52

    52 This function provides the following options in the cooling fans’ operation when the projector is turned off (p.20). L1 ...... Normal operation L2 ...... Slower and lower-sound than the normal operation (L1), but it takes more time to cool the projector down. Fan Setting Fan control Fan w arning log This function records anomalous operations w ...

  • Eiki LC-XB42 - page 53

    53 Setting Factory default This function returns all setting values except for the user logo, PIN code lock, Logo PIN code lock, lamp counter , and filter counter to the factory default settings. Exit the Setting Menu. Quit Select [Y es] to activate it. Factory default This function is used to set a frequency for the filter cleaning. When the proje ...

  • Eiki LC-XB42 - page 54

    54 The W ARNING indicator shows the state of the function which protects the projector . Check the state of the W ARNING indicator and the POWER indicator to take proper maintenance. w arning Indicator The projector is shut down and the w ARNING indicator is blinking red. When the temperature inside the projector reaches a certain level, the projec ...

  • Eiki LC-XB42 - page 55

    55 Maintenance and Cleaning T urn off the projector , and unplug the AC power cord from the AC outlet. T urn the projector over and remove the filters by pulling the latches upward. 1 2 Filters prevents dust from accumulating on the optical elements inside the projector . Should the filters become clogged with dust particles, it will reduce cooling ...

  • Eiki LC-XB42 - page 56

    56 Maintenance and Cleaning Cleaning the Projector Cabinet Cleaning the Projection Lens Unplug the AC power cord before cleaning. Gently wipe the projection lens with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner , or use a lens cleaning paper or commercially available air blower to clean the lens. Avoid using an ...

  • Eiki LC-XB42 - page 57

    57 Maintenance and Cleaning When the projection lamp of the projector reaches its end of life, the Lamp replacement icon appears on the screen and LAMP REPLACE indicator lights yellow . Replace the lamp with a new one promptly . The timing when the LAMP REPLACE indicator should light is depending on the lamp mode. Follow these steps to replace the ...

  • Eiki LC-XB42 - page 58

    58 Maintenance and Cleaning This projector uses a high-pressure lamp which must be handled carefully and properly . Improper handling may result in accidents, injury , or create a fire hazard. ● Lamp life may differ from lamp to lamp and according to the environment of use. There is no guarantee of the same life for each lamp. Some lamps may fail ...

  • Eiki LC-XB42 - page 59

    59 Problem: – Solutions No power – Plug the power cord of the projector into the AC outlet. – See if the POWER indicator lights red. – Wait until the POWER indicator stops blinking to turn on the projector again. The projector can be turned on after the POWER indicator turns red. (See page 19) – Check the WARNING indicator . If the W ARNI ...

  • Eiki LC-XB42 - page 60

    60 Appendix No image – Check the connection between your computer or video equipment and the projector . (See pages 16-18) – See if the input signal is correctly output from your computer . Some laptop computers may need to change the setting for monitor output when connecting to a projector . See your computer ’s instruction manual for the s ...

  • Eiki LC-XB42 - page 61

    61 Appendix The image is distorted or runs off. – Check "PC adjustment" menu or "Screen" menu and adjust them. (see pages 29,30, 34,35) PIN code dialog box appears – PIN code lock is being set. Enter a PIN code (the “1234” or numbers at start-up. you have set).( See pages 19, 50,51) The Remote Control does – Check the ...

  • Eiki LC-XB42 - page 62

    62 w ARNING : High voltages are used to operate this projector . Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center . Specify the model number and explain about the problem. We will advise you how to obtain service. This ...

  • Eiki LC-XB42 - page 63

    63 Appendix Menu T ree SVGA 1 Mode 1 Mode 2 - - - - Auto PC Adj. T otal dots Horizontal V ertical Display area H Display area V Reset Dynamic Real Blackboard (Green) Image 1 Image 2 Image 3 Image Adjust Contrast Brightness Color temp. Red Gamma Store Quit Normal T rue Digital zoom – Full 0–63 0–63 Computer Input PC Adjust Mode 1 Mode 2 Mode 3 ...

  • Eiki LC-XB42 - page 64

    64 Appendix Auto P AL SECAM NTSC NTSC 4.43 P AL-M P AL-N Video Input Auto 1080i 1035i 720p 575p 480p 575i 480i Dynamic Cinema Blackboard (Green) Image 1 Image 2 Image 3 Quit Normal 0–63 0–63 Off Setting Image Select System (2) System (3) Image Adjust Contrast Brightness Color T int Red Green Blue Sharpness Reset Store Gamma Progressive 0–63 0 ...

  • Eiki LC-XB42 - page 65

    65 Check the indicators for projector condition. • • • green. • • • red • • • off • • • blinks green. When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow . When this indicator lights yellow , replace the projection lamp with a new one promptly . Reset the lamp replacement counter after ...

  • Eiki LC-XB42 - page 66

    66 Appendix Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V -, H-Frequency mentioned below and less than 140 MHz of Dot Clock for analog signal. When selecting these modes, PC adjustment can be limited. ON-SCREEN DISPLA y RESOLUTION H-Freq. (KHz) V -Freq. (Hz) VGA 1 640 x 480 31.47 59. ...

  • Eiki LC-XB42 - page 67

    67 Appendix T echnical Specifications Mechanical Information Projector T ype Multi-media Projector Dimensions (W x H x D) 334 mm x 78 mm x 262 mm (Not including protrusion) Net Weight 3.6 kg Feet Adjustment 0˚ to 8.9˚ Panel Resolution LCD Panel System 0.8” TFT Active Matrix type, 3 panels Panel Resolution 1,024 x 768 dots Number of Pixels 2,359 ...

  • Eiki LC-XB42 - page 68

    68 Model No. COMPONENT -VGA Cable : AH-98771 SCART -VGA Cable : AH-98881 The parts listed below are optionally available. When ordering those parts, specify the item name and Model No. to the sales dealer . Optional Parts Accessories Owner ’s Manual (CD-ROM) Quick Reference Guide AC Power Cord Remote Control and Batteries VGA Cable Serial Control ...

  • Eiki LC-XB42 - page 69

    69 T erminal : Mini DIN 8-PIN SERVICE PORT CONNECT OR R X D ----- ----- GND ----- ----- ----- 1 2 3 4 5 6 7 8 COMPUTER IN 1 /COMPUTER IN 2 /COMPONENT IN /MONITOR OUT (ANALOG) T erminal: Analog RGB (Mini D-sub 15 pin) 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Configurations of T erminals Red (R/Cr) Input/ R Output Ground (Horiz.sync.) Green (G/Y) Input/ G ...

  • Eiki LC-XB42 - page 70

    70 Appendix Write down the PIN code number in the column below and keep it with this manual securely . If you forgot or lost the number and unable to operate the projector , contact the service station. PIN Code Number Memo Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* Put the label below (supplied) on in a prominent place of th ...

  • Eiki LC-XB42 - page 71

    KG3BC ©2008 Eiki International, Inc. U .S.A. EIKI International, Inc. 30251 Esperanza Ranc ho Sant a Margarita CA 92688-21 32 U .S.A. T el : 800-242-3454 (949)-457-0200 Fax : 80 0-457 -3454 (949)-457 -7878 E-Mail : usa@eiki.com Deutschland & Öst er reic h EIKI Deutsc hland GmbH Am F rauwald 1 2, 6551 0 Idstein Deutsc hland T el : 061 26-9371 ...

Fabricant Eiki Catégorie Projector

Les documents que nous recevons du fabricant de l'appareilEiki LC-XB42 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Eiki
- manuels d’utilisations LC-XB42
- fiches produit Eiki
- dépliants
- ou étiquettes-énergie Eiki LC-XB42
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Eiki LC-XB42.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Eiki LC-XB42, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Eiki LC-XB42. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Eiki LC-XB42.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Eiki LC-XB42, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Eiki LC-XB42 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Eiki LC-XB42.

Le manuel d’utilisation complet Eiki, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Eiki LC-XB42 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Eiki LC-XB42, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lEiki LC-XB42 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Eiki LC-XB42 - qui devraient nous aider dans les premières étapes lors de l'utilisation Eiki LC-XB42
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Eiki LC-XB42
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Eiki LC-XB42 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Eiki LC-XB42?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Eiki LC-XB42, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Eiki LC-XB42 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)