Manuel d’utilisation Avaya 7940

35 pages 0.76 mb
Télécharger

Aller à la page of 35

Summary
  • Avaya 7940 - page 1

    Avaya Solution & Interoperability Test Lab Configuring SIP IP Telephony Using Avaya Converged Communications Server, Avaya Communication Manager, and Cisco 7940/7960 SIP Telephones – Issue 1.0 Abstract These Application Notes describe the configuration steps requir ed to connect Cisco 7940/7960 SIP telephones to a SIP infrastructure cons isti ...

  • Avaya 7940 - page 2

    FAS; Reviewed: WCH 10/2 2/2004 Solution & Interoperability Te st Lab Ap plication Notes ©2004 Avaya Inc. Al l Right s Reserved. 2 of 35 Cisco7960S IP.doc 1. Introduction 1.1. Background With the introduction of the SIP protocol sta ndard that supports tele phony as well as a wide range of other communication modes, there is a much broader rang ...

  • Avaya 7940 - page 3

    Avaya Converged Communication Server (CCS) Avaya S8300 Media Server G700 Media Gateway IA770 INTUIT Y Messagin g System Avaya P333T Modular Stackable Switch Web Browser TFTP Server Cisco 7940 and 7960 SIP Telephones 10.1.1.0/24 .103 .50 .5 .170-172 .10 Avaya 4602 SIP Phones Figure 1: Avaya SIP Test Configuration with Cisco 7940/7960 SIP Phones Admi ...

  • Avaya 7940 - page 4

    FAS; Reviewed: WCH 10/2 2/2004 Solution & Interoperability Te st Lab Ap plication Notes ©2004 Avaya Inc. Al l Right s Reserved. 4 of 35 Cisco7960S IP.doc 2. Equipment and Sof tware V alidated The following equipment and software were used in the configuration shown in Table 2 . Be sure to use the software version combination shown when followi ...

  • Avaya 7940 - page 5

    No. FEATUR E CO M M ENTS 1 Call Ho ld YES YE S 2 Consul tatio n Ho ld YES YE S 3 Mu s i c O n H o l d NO NO A v aila ble in OPS (futur e release) 4 Unattended Transfer YES YE S 5 Att ended Transfer YES YE S 6 Transf er - I M NO NO 7 Call Fo rward Unco nditional YES YE S 8 Call Fo rward Busy NO Y ES OPS 9 Call Fo rward No A nswer NO Y ES OPS 10 3- w ...

  • Avaya 7940 - page 6

    3.2. Message Waiting Indicator (MWI) With the Outboard Proxy SIP extended feature set, a SIP telephone th at supports IETF RFC 3265 and MWI Draft 4 (Subscribe/Notify method) will illum inate/extinguish its MWI lamp when voice messages are left/read for that extens ion. Since the Cisco 7940/7960 SIP phones support only the unsolicited Notify method ...

  • Avaya 7940 - page 7

    FAS; Reviewed: WCH 10/2 2/2004 Solution & Interoperability Te st Lab Ap plication Notes ©2004 Avaya Inc. Al l Right s Reserved. 7 of 35 Cisco7960S IP.doc Steps Description 2. The Converged Communications Server admini stration web interface will be displayed. Expand the Users link on the left side of the page and click on Add . ...

  • Avaya 7940 - page 8

    FAS; Reviewed: WCH 10/2 2/2004 Solution & Interoperability Te st Lab Ap plication Notes ©2004 Avaya Inc. Al l Right s Reserved. 8 of 35 Cisco7960S IP.doc Steps Description 3. The Add User page will be displayed. Fill in the requi red fields (indicated by *). In the screen below, the user corresponding to a Cisco 7960 SIP telephone is being add ...

  • Avaya 7940 - page 9

    FAS; Reviewed: WCH 10/2 2/2004 Solution & Interoperability Te st Lab Ap plication Notes ©2004 Avaya Inc. Al l Right s Reserved. 9 of 35 Cisco7960S IP.doc Steps Description 4. The confirmation page will be disp layed. Click Continue . Repeat Steps 2-4 for each user to be supported. 5. To apply the administration in the above steps, click on Upd ...

  • Avaya 7940 - page 10

    FAS; Reviewed: WCH 10/2 2/2004 Solution & Interoperability Te st Lab Ap plication Notes ©2004 Avaya Inc. Al l Right s Reserved. 10 of 35 Cisco7960S IP.doc 4.2. Configure the Cisco 7940/7960 SIP Telephone Cisco 7940/7960 SIP telephones can be configured using two methods: 1. Configuration files downloade d from a TFTP server specified via DHCP ...

  • Avaya 7940 - page 11

    FAS; Reviewed: WCH 10/2 2/2004 Solution & Interoperability Te st Lab Ap plication Notes ©2004 Avaya Inc. Al l Right s Reserved. 11 of 35 Cisco7960S IP.doc Steps Description 1. Edit the default and phone-specific configuration f ile(s). The table below shows the relations hip between the param eters that must be configured for the phone and tho ...

  • Avaya 7940 - page 12

    FAS; Reviewed: WCH 10/2 2/2004 Solution & Interoperability Te st Lab Ap plication Notes ©2004 Avaya Inc. Al l Right s Reserved. 12 of 35 Cisco7960S IP.doc Steps Description 2. Reboot the phone. If TFTP support has been pr operly configured, the ph one will download the default and specific configuration files, and re gister with the Avaya Conv ...

  • Avaya 7940 - page 13

    FAS; Reviewed: WCH 10/2 2/2004 Solution & Interoperability Te st Lab Ap plication Notes ©2004 Avaya Inc. Al l Right s Reserved. 13 of 35 Cisco7960S IP.doc # SIP Default Generic Configuration File # Image Version image_version: P0S3-06-3-00 # Proxy Server proxy1_address: "10.1.1.50" ; Can be dotted IP or FQDN proxy2_address: "&qu ...

  • Avaya 7940 - page 14

    FAS; Reviewed: WCH 10/2 2/2004 Solution & Interoperability Te st Lab Ap plication Notes ©2004 Avaya Inc. Al l Right s Reserved. 14 of 35 Cisco7960S IP.doc # SIP Configuration Generic File # Line 1 appearance line1_name: 23071 # Line 1 Registration Authentication line1_authname: "23071" # Line 1 Registration Password line1_password: & ...

  • Avaya 7940 - page 15

    FAS; Reviewed: WCH 10/2 2/2004 Solution & Interoperability Te st Lab Ap plication Notes ©2004 Avaya Inc. Al l Right s Reserved. 15 of 35 Cisco7960S IP.doc 5. Configuring for the Extended Feature Set In addition to the steps outlined in Section 4, the following additional adm inistration steps are required to support the extended feature set on ...

  • Avaya 7940 - page 16

    FAS; Reviewed: WCH 10/2 2/2004 Solution & Interoperability Te st Lab Ap plication Notes ©2004 Avaya Inc. Al l Right s Reserved. 16 of 35 Cisco7960S IP.doc (NOTE: You must logoff & login to effect the permission changes.) 5.1.2. Define Ou tboard Proxy SI P Feat ure Access Codes (FACs) In order to define the FNEs for the Ou tboard Proxy SIP ...

  • Avaya 7940 - page 17

    FAS; Reviewed: WCH 10/2 2/2004 Solution & Interoperability Te st Lab Ap plication Notes ©2004 Avaya Inc. Al l Right s Reserved. 17 of 35 Cisco7960S IP.doc change feature-access-codes Page 2 of 6 FEATURE ACCESS CODE (FAC) Data Origination Access Code: Data Privacy Access Code: Directed Call Pickup Access Code: 607 Emergency Access to Attendant ...

  • Avaya 7940 - page 18

    FAS; Reviewed: WCH 10/2 2/2004 Solution & Interoperability Te st Lab Ap plication Notes ©2004 Avaya Inc. Al l Right s Reserved. 18 of 35 Cisco7960S IP.doc 5.1.3. Define Feature Na me Extensions (FNEs) Now the FNEs can be defined using the change off-pbx-telephone feature-name-extensions command. It is recommended that a uniform format for thes ...

  • Avaya 7940 - page 19

    FAS; Reviewed: WCH 10/2 2/2004 Solution & Interoperability Te st Lab Ap plication Notes ©2004 Avaya Inc. Al l Right s Reserved. 19 of 35 Cisco7960S IP.doc 5.1.5. Add stations Use the add-station command to add a station for each SIP phone to be supported. Use 4620 for the Station Type and be sure to include the Coverage Path for voice messagin ...

  • Avaya 7940 - page 20

    FAS; Reviewed: WCH 10/2 2/2004 Solution & Interoperability Te st Lab Ap plication Notes ©2004 Avaya Inc. Al l Right s Reserved. 20 of 35 Cisco7960S IP.doc For most applications, the default values can be used for Page 2. add station 24071 Page 2 of 4 STATION FEATURE OPTIONS LWC Reception: spe Auto Select Any Idle Appearance? n LWC Activation? ...

  • Avaya 7940 - page 21

    FAS; Reviewed: WCH 10/2 2/2004 Solution & Interoperability Te st Lab Ap plication Notes ©2004 Avaya Inc. Al l Right s Reserved. 21 of 35 Cisco7960S IP.doc Off-PBX Station Feature Name Extension (FNE) Station Button Required Active Appearance Select call-a ppr, brdg-appr, or abrdg-appr Automatic Call-Back Cancel (not yet supported) Call Forward ...

  • Avaya 7940 - page 22

    FAS; Reviewed: WCH 10/2 2/2004 Solution & Interoperability Te st Lab Ap plication Notes ©2004 Avaya Inc. Al l Right s Reserved. 22 of 35 Cisco7960S IP.doc 5.2. Configure the Avaya C onverged Communications Server 5.2.1. Adding an Addr ess Map Address maps are used in the Converged Comm unications Server to specify how incoming SIP calls are to ...

  • Avaya 7940 - page 23

    Steps Description 1. Click on the Media Servers link on the left side of the main Converged Communications Server web page. The List Media Servers page is displayed. Click on Map . FAS; Reviewed: WCH 10/2 2/2004 Solution & Interoperability Te st Lab Ap plication Notes ©2004 Avaya Inc. Al l Right s Reserved. 23 of 35 Cisco7960S IP.doc ...

  • Avaya 7940 - page 24

    FAS; Reviewed: WCH 10/2 2/2004 Solution & Interoperability Te st Lab Ap plication Notes ©2004 Avaya Inc. Al l Right s Reserved. 24 of 35 Cisco7960S IP.doc Steps Description 2. The List Address Map page is displayed. Select Add Map in New Group . ...

  • Avaya 7940 - page 25

    FAS; Reviewed: WCH 10/2 2/2004 Solution & Interoperability Te st Lab Ap plication Notes ©2004 Avaya Inc. Al l Right s Reserved. 25 of 35 Cisco7960S IP.doc Steps Description 3. The Add Address Map page will be displayed. Specify a Name for the address m ap, and the Pattern match specification. In this example, al l FNEs begin with 70. The patte ...

  • Avaya 7940 - page 26

    FAS; Reviewed: WCH 10/2 2/2004 Solution & Interoperability Te st Lab Ap plication Notes ©2004 Avaya Inc. Al l Right s Reserved. 26 of 35 Cisco7960S IP.doc Steps Description 4. The List Address Map page will be displayed ag ain, this time with the updated m ap information. Note that the contact for the S8300/G 700 has been automatically generat ...

  • Avaya 7940 - page 27

    FAS; Reviewed: WCH 10/2 2/2004 Solution & Interoperability Te st Lab Ap plication Notes ©2004 Avaya Inc. Al l Right s Reserved. 27 of 35 Cisco7960S IP.doc 5.3.1. Add Parameters to Configuration Files The configuration files should be modified to support two functions re lative to Communication Manager /Outboard Proxy SIP: Public extensi on dis ...

  • Avaya 7940 - page 28

    Steps Description 1. At the telephone, press the settings button to bring up the main configuration menu. up/down FAS; Reviewed: WCH 10/2 2/2004 Solution & Interoperability Te st Lab Ap plication Notes ©2004 Avaya Inc. Al l Right s Reserved. 28 of 35 Cisco7960S IP.doc ...

  • Avaya 7940 - page 29

    FAS; Reviewed: WCH 10/2 2/2004 Solution & Interoperability Te st Lab Ap plication Notes ©2004 Avaya Inc. Al l Right s Reserved. 29 of 35 Cisco7960S IP.doc Steps Description 2. Using the up/down button, move the highlighted selection to Unlock Configuration , and press the Select function button. Enter the appropr iate password using the keypad ...

  • Avaya 7940 - page 30

    FAS; Reviewed: WCH 10/2 2/2004 Solution & Interoperability Te st Lab Ap plication Notes ©2004 Avaya Inc. Al l Right s Reserved. 30 of 35 Cisco7960S IP.doc Steps Description 3. The Call Preferences menu will be d isplayed. Move the highlighted selection to Speed Dial Lines , and press the Select function button. ...

  • Avaya 7940 - page 31

    FAS; Reviewed: WCH 10/2 2/2004 Solution & Interoperability Te st Lab Ap plication Notes ©2004 Avaya Inc. Al l Right s Reserved. 31 of 35 Cisco7960S IP.doc Steps Description 4. The Speed Dial Configuration menu will be dis played. Move the highlighted selection to the desired speed dial button and press the Edit function button. ...

  • Avaya 7940 - page 32

    FAS; Reviewed: WCH 10/2 2/2004 Solution & Interoperability Te st Lab Ap plication Notes ©2004 Avaya Inc. Al l Right s Reserved. 32 of 35 Cisco7960S IP.doc Steps Description 5. Enter the Name and Number for the speed dial button. For Outboard Proxy SIP features, this should be one of the FNEs. Press the Accept function button when finished. ...

  • Avaya 7940 - page 33

    FAS; Reviewed: WCH 10/2 2/2004 Solution & Interoperability Te st Lab Ap plication Notes ©2004 Avaya Inc. Al l Right s Reserved. 33 of 35 Cisco7960S IP.doc Steps Description 6. Repeat steps 4-5 for each button desired, selec ting most frequently used Outboard Prox y SIP features for assignment to the buttons. A repres entative button arrangemen ...

  • Avaya 7940 - page 34

    FAS; Reviewed: WCH 10/2 2/2004 Solution & Interoperability Te st Lab Ap plication Notes ©2004 Avaya Inc. Al l Right s Reserved. 34 of 35 Cisco7960S IP.doc 2. Verify basic feature set administratio n by lifting the handset (or pressing the speaker button), and making calls to other phones. Test th ose features for which Yes appears in the secon ...

  • Avaya 7940 - page 35

    FAS; Reviewed: WCH 10/2 2/2004 Solution & Interoperability Te st Lab Ap plication Notes ©2004 Avaya Inc. Al l Right s Reserved. 35 of 35 Cisco7960S IP.doc © 2004 Avaya Inc. All Rights Reserved. Avaya and the Avaya Logo are trademarks of Avay a Inc. A ll trademarks identified by ® and ™ are registered trademarks or trademarks, resp ectiv el ...

Fabricant Avaya Catégorie IP Phone

Les documents que nous recevons du fabricant de l'appareilAvaya 7940 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Avaya
- manuels d’utilisations 7940
- fiches produit Avaya
- dépliants
- ou étiquettes-énergie Avaya 7940
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Avaya 7940.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Avaya 7940, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Avaya 7940. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Avaya 7940.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Avaya 7940, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Avaya 7940 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Avaya 7940.

Le manuel d’utilisation complet Avaya, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Avaya 7940 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Avaya 7940, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lAvaya 7940 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Avaya 7940 - qui devraient nous aider dans les premières étapes lors de l'utilisation Avaya 7940
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Avaya 7940
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Avaya 7940 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Avaya 7940?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Avaya 7940, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Avaya 7940 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)