Français dropdown-ico

Manuel d’utilisation Graco 310692D

34 pages 1.06 mb
Télécharger

Aller à la page of 34

Summary
  • Graco 310692D - page 1

    Graco Inc. P.O. Box 1441 Minneapolis, MN 55440-1441 Copyright 2004, Graco Inc. is r egistered to I. S. EN ISO 9001 310692D Instr uctions - P ar ts Delta Spra y ® XT Gun For Airs pra y , HVLP , and Compliant guns with pressure, siphon, and gravity f eeds. 300 psi (2.1 MP a, 21bar) Maximum W orking Fluid Pressure 100 psi (0.7 MP a, 7 bar) Maximum W ...

  • Graco 310692D - page 2

    Related Ma nuals 2 310692D Contents Related M anuals . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Manual Con ventions . . . . . . . . . . . . . . . . . . . . . . . . 2 W arnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Selection Char ts . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Gun Selection . . . ...

  • Graco 310692D - page 3

    Warnings 310692D 3 Wa r n i n g s The f ollo wing warnings include general saf ety inf or mation for t his equipment. More specif ic warnings are included in the te xt where app licab le. WA R N I N G FIRE AND EXPLOSION HAZARD - FE CED/IND General Flammab le fumes , such as solv ent and paint fumes , in work ar ea can ignite or e xp lode. T o help ...

  • Graco 310692D - page 4

    Selection Charts 4 310692D Selection Char ts Pressure feed spra y guns * Guns included with harden ed SST needle tips , and nozzles . † Clear chromate gun body . Pressure feed spra y guns with 1 quart pressure feed cup 239802 Siphon feed spra y guns Orifice Size in. (mm) HVLP Compliant Airsp ray .030 (0.75) 234647 234693 234636 .042 (1.0) 234648 ...

  • Graco 310692D - page 5

    Selection Charts 310692D 5 Grav ity feed spra y guns (without gra vity cup) Grav ity feed spra y guns with 16 oz. gra vity cup Grav ity feed spra y guns with 3M ™ PPS ™ gra vity cup Orifice si ze in. (mm) HVLP Compliant Airspra y .055 (1.4) 234658 234685 234662 .070 (1.8) 234659 234686 234663 Orifice si ze in. (mm) HVLP Compliant Airspra y .055 ...

  • Graco 310692D - page 6

    Gun Selection 6 310692D Gun Selection HVLP Guns An HVLP gun is a high tr ansf er eff iciency gun which lim- its the air pressure at the air cap to 10 psi maximum. In some areas , an HVLP gun is required f or compliance with en vironmental standa rds. Compliant Guns A compliant gun is a high tr ansf er efficien cy gun which has been tested to ha v e ...

  • Graco 310692D - page 7

    Nozzle, Needle, and Tip Selection 310692D 7 Nozzle, Needle , and Tip Selection The char t below lists the a v ailab le nozzle sizes and required fluid needle and nozzles f or the Delta Spr a y XT guns . The HVLP , Complian t, and Airspr a y guns all use the same nozzle design and fluid needles . When spr a y- ing high flow rates and high viscosity ...

  • Graco 310692D - page 8

    Installation 8 310692D Installation T op and bottom f eed guns Key: A Delta Spra y XT Gun B Fluid Inl et, 3/8 npsm (R3/ 8-19)* CA i r I n l e t D Air Hose recommended 5/16 in. (7.9 mm) ID hose optional 3/8 in. (9.5 mm) ID hose E Air Shutoff V alve F Air Regulator GA i r F i l t e r H Air Supply Line *Pressure and siphon f eed guns will ha v e botto ...

  • Graco 310692D - page 9

    Setup 310692D 9 Setup Flushing the gun 1. T o flush the gun, use a solvent that is compatible with paint to be spr a yed. Hold a metal par t of the gun firmly to a grounded metal pail. T rigger the gun to flush solv ent throug h gun. Connecting the air line 2. Install an ai r pressure regulator (F ). See F IG . 1. 3. Install an air filt er (G). See ...

  • Graco 310692D - page 10

    Setup 10 310692D Connecting the fluid hose (Pressure f eed guns on ly) 1. T o control fluid pressure to the gun, in stall a fluid regulator on the fluid line. 2. Connect th e fluid hose (J) t o the gun fluid inlet (B) 3/8-18 np sm [R 3/ 8-19] comp ound thre ad. 3. Connect th e other end of the f luid hose (J) to a re gu- lated fluid supply line . C ...

  • Graco 310692D - page 11

    Setup 310692D 11 Adjusting the Spra y P attern 1. T o achiev e full f an patter n, open the patt er n adjust- ment v alv e (25) b y turning the knob fully counter- clockwise . 2. T rigger gun and adju st gun air pressure: 3. T o establish the correc t fluid flow , t ur n the flu id adjustment knob (21) counterclo ckwise until no restr iction of th ...

  • Graco 310692D - page 12

    Setup 12 310692D 7. T o achiev e a narrow spra y pattern, tu r n patter n adjustment valve (25) clockwise. 8. F or HVLP only : T o measure the aircap a tomizing pressures, use the accessory aircap v erification kit. See Accessories on page 30. 9. T o improve atomization, reduce the fluid f low rate. Increasing the air pressure can improve atomizati ...

  • Graco 310692D - page 13

    Operation 310692D 13 Operation Pressure Relief Pr ocedure 1. T ur n off air and fluid supp ly . 2. Hold a metal part of the gun firmly to a grounde d metal pail. T rigger the gun to relieve pressure. Appl ying the Fluid When using the HVLP spray gun, instead of a conv en- tional airspr a y gun, y ou ma y need to use a slightly slowe r hand mov emen ...

  • Graco 310692D - page 14

    Daily Gun Maintenance 14 310692D Dail y Gun Maintenance General maintenance ✓ Relie v e the pressure. ✓ Clean the fluid and air line f ilters daily . ✓ Chec k f or an y fluid leakage from the gun and flui d hoses. ✓ Flush the gun bef ore changing colors and whene v er you are done oper ating the gun . WA R N I N G F ollow Pressure Relief Pr ...

  • Graco 310692D - page 15

    Daily Gun Maintenance 310692D 15 Flushing and c leaning Gravity and Siphon Feed Guns 1. F or pac kages t hat include fluid cups , use the f ollo w- ing char t f or flushing and cleaning instructions . 2. Contin ue to step 8 to perf or m daily cleaning of the Delta Spra y XT gun. Pressure Feed Guns 1. Relie v e the pr essure, page 13 . 2. Disconnect ...

  • Graco 310692D - page 16

    Daily Gun Maintenance 16 310692D 8. Remov e the air cap retaining ring assemb ly (15) and air cap (14) . 9. T rigger the gun while y ou rem ov e the flui d nozzle (12) from the gun with the gun tool (28) 10. Dip the end of a sof t-bristle brush into a compatible solv ent. Do not continu ously soak the brush's br is- tles with solv ent and do n ...

  • Graco 310692D - page 17

    Daily Gun Maintenance 310692D 17 15. Dampen a soft clo th with solv ent and wring-out the e xcess. P oint the gun down and wipe off the outsid e of the gun. 16. After clea ning the gu n, lubr icate the follo wing par t s with lubricant 111265 daily: • Fluid adjustment knob threads • T rigger piv ot pin • Fluid needle shaft F IG . 22 ti4848a F ...

  • Graco 310692D - page 18

    Troubleshooting 18 310692D T r oubleshooting WA R N I N G F ollow Pressure Relief Proce dure, page 13 when you sto p spra ying and bef ore cleaning, checkin g, ser- vicing, or tr anspor ting equipment. Read w arnings, page 3. Prob lem C ause Solution Fluid flo w is fluttering while spra ying. 1. Fluid nozzle not tight enough. 2. Fluid filter clogge ...

  • Graco 310692D - page 19

    Service 310692D 19 Service Replacing the air and fluid pac kings T ools needed: • Gun T ool - pro vided • P ac king Installatio n T ool - pr ovided • Adjustab le Wrench • Screw Driv er • Lubricant par t no . 111265; se e Accessories, page 28, to order • Compatib le Solv ent Disassembling the gun 1. Relie v e the pr essure, page 13 . 2. ...

  • Graco 310692D - page 20

    Service 20 310692D 6. Loosen the hex nut (9) with the gu n tool (28) . 7. Remo v e the spra y hou sing (2A) and insert (4). Replacing the spray hou sing o-rings and packings 1. With the spr a y housing (2A) re mov ed from t he inser t (4), use a mec hanical pick to remove the o-ring (2 B) from the housing (2A). 2. Remov e o-r ing (34) fr om the ins ...

  • Graco 310692D - page 21

    Service 310692D 21 4. Unscre w the pac king scre w (8) from the insert (4) with the gun tool (2 8). 5. Using a mechan ical pic k, push th e three fluid pa ck- ings (5, 6, 7) out of th e inser t (4). Be c areful not to damage the insert. Discard the old fluid pac kings. 6. Place the new fluid p ackings (5, 6, 7) an d packing screw (8) onto the needl ...

  • Graco 310692D - page 22

    Service 22 310692D Replacing the flui d v alve pack ings 1. Remo v e the fluid adjus tment knob (21) and fluid spring (23). 2. Pull the fluid needle (13) out the bac k of the gun. 3. Remo v e the fluid v alv e nut (19), air v alv e spring (22), and air v alv e assemb ly (26). Discard the ai r valv e assemb ly . Using a mechanical pick, remo v e the ...

  • Graco 310692D - page 23

    Service 310692D 23 Reassembling the gun 1. Slide the insert (4) into the spra y housing (2A), and install them ont o the gun body (1). Align the housing with the slot and lip (A) on the gun body . 2. Tighten the he x nu t (9) onto the inser t (4) hand-tigh t, then loosen the n ut about one turn so the inser t (4) and spra y ho using sit loosely in ...

  • Graco 310692D - page 24

    Service 24 310692D 8. Install the t rigger (10), piv ot pin (17), w a v e washer (18), and scre w (11). T orque the scre w to 20- 30 in-lb (2.3-3.4 N• m). 9. Apply a thin f ilm of lubr icant to the fluid no zzle seat and threads . 10. T rigg er the gun w hile you install the fluid n ozzle (12) with the gun tool (28). T orque the nozzle securely t ...

  • Graco 310692D - page 25

    Service 310692D 25 ...

  • Graco 310692D - page 26

    Parts 26 310692D Pa r t s Airspra y , HVLP , and Compliant Guns With Pressure, Gravity , and Siph on Feeds ti4831b 4† 36* 2A 2B* 10 11 24 23 22 20* 19 21 13 26* 16* 35 25C 25A 25B* 25D 5* 6* 7* 8 9 29 28 † Insert (4) appears f or top or bottom f eed depending on application. 37* 15A 15B* 14 12 17 1 13A ti4821a ...

  • Graco 310692D - page 27

    Parts 310692D 27 Airspra y , HVLP , an d Compliant Guns With Pressure, Gravity , and Siph on Feed ★ See char t on pages 6 and 7 f or par t number . * P arts included in Kit 234828 (purchase separ ately). Ref. No P ar t No. Description Qty . 1 2 34740 BOD Y , gun 1 2 SPRA Y HOUSING ASSY ., includes items 2A-B; For par t number , see char t belo w ...

  • Graco 310692D - page 28

    Parts 28 310692D 234788 Spatter or Spec king Airspra y Gun ti3652482aa 4 36* 2A 2B* 10 11 24 23 22 20* 19 21 13 26* 16* 35 5* 6* 7* 8 9 25 15A 15B* 14 12 17 1 37 29 28 ti4831b ...

  • Graco 310692D - page 29

    Parts 310692D 29 234788 Spatter or Spec king Airspra y Gun * P arts included in Kit 234828 (purchase separ ately). Ref. No P ar t No. Description Qty . 1 2 34740 BOD Y , gun 1 2 2 34592 SPRA Y HOUSING ASSY ., includes items 2A-B; 1 2A HOUSING, s pra y; 1 2B* O-RING 1 4 1 5D661 INSER T , fluid; 1 5* 188494 P ACKING, sprea der 1 6* 188495 P ACKING, u ...

  • Graco 310692D - page 30

    Accessories 30 310692D Accessories Cleaning Brush 105749 F or use in clea ning gun Lubricant 111265 One 4 oz. (113 gram) tube sa nitary (non-silicone) lubr i- cant f or fl uid seals and w ear ar eas. Air Contr ol V alve Kit 243670 Install on the gun air in let to contr ol both the at omizing air and the pr essure in the spr a y gun cup (if used). 1 ...

  • Graco 310692D - page 31

    Accessories 310692D 31 Gun Air Regulator Assy . 235119 0-100 psi (0-0.7 MP a, 0-7 bar) ai r regulator t o control air pressure to gun. Gravity Cup F or use with gr avit y fe ed gun. Nylon cup , 304 sta inless steel 3/8 npsm(f) fluid inlet fitting, fluid f ilter car tridge included. Grav ity Cup Holder Brac ket 192407 Fits both gravity cup sizes . S ...

  • Graco 310692D - page 32

    Accessories 32 310692D SST Pressure Cup Kit 239803 with double air regulator 1 qt. (0.95 liter) capacity , 304 stainless st eel cup . Includes a pressure relief v alv e , a 0-100 psi ( 0-0.7 MP a, 0-7 bar) air regula tor f or gun atomizat ion, and a 0-15 psi (0-104 kP a, 0-1.0 bar) air regula tor f or the 1 qt. pressure cup supply air . Disposable ...

  • Graco 310692D - page 33

    Technical Data 310692D 33 Te c h n i c a l D a t a *All readings w ere tak en with t he gun controls fu lly open and with 40 psi (280 kP a, 2.8 bar). Sound pressure w as tested to CA GI-PNUER OP-1969 . Sound pow er w as tested to ISO 3744- 1981. Category Data Maximum W orking Fluid Pressure 300 psi (2.1 MP a, 21 bar) Maximum W orking Air Pressure 1 ...

  • Graco 310692D - page 34

    All written and visual data contained in this document reflects the latest product information available at the time of publica tion. Graco reserves the right to make changes a t any time without notice. MM 310692 Sales Office: Minneapol is International Offices: Belgium, China, Japan, Korea GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440-1441 www.g ...

Fabricant Graco Catégorie Paint Sprayer

Les documents que nous recevons du fabricant de l'appareilGraco 310692D peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Graco
- manuels d’utilisations 310692D
- fiches produit Graco
- dépliants
- ou étiquettes-énergie Graco 310692D
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Graco 310692D.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Graco 310692D, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Graco 310692D. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Graco 310692D.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Graco 310692D, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Graco 310692D par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Graco 310692D.

Le manuel d’utilisation complet Graco, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Graco 310692D - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Graco 310692D, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lGraco 310692D qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Graco 310692D - qui devraient nous aider dans les premières étapes lors de l'utilisation Graco 310692D
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Graco 310692D
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Graco 310692D dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Graco 310692D?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Graco 310692D, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Graco 310692D il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)