Français dropdown-ico

Manuel d’utilisation Supermicro MBD-H8SML-IF-O

78 pages Non applicable
Télécharger

Aller à la page of 78

Summary
  • Supermicro MBD-H8SML-IF-O - page 1

    USER’S MANUAL Revision 1.0c ® S UPER H8SML-7 H8SML-i H8SML-7F H8SML-iF ...

  • Supermicro MBD-H8SML-IF-O - page 2

    The information in this User ’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, and makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Not ...

  • Supermicro MBD-H8SML-IF-O - page 3

    Preface iii Preface About This Manual This manual is written for system integrators, PC technicians and knowledgeable PC users. It provides information for the installation and use of the H8SML-7/i(F) serverboard. The H8SML-7/i(F) serverboard is based on the AMD® SR5650/SP5100 chipsets and supports one AMD Socket AM3+ type processor with up to 32 ...

  • Supermicro MBD-H8SML-IF-O - page 4

    T able of Contents Chapter 1 Introduction 1-1 Overview ......................................................................................................... 1-1 Checklist .......................................................................................................... 1-1 1-2 Contacting Supermicro ...................................... ...

  • Supermicro MBD-H8SML-IF-O - page 5

    Power On LED ......................................................................................... 2-13 NMI Button ............................................................................................... 2-13 Fan Headers ............................................................................................. 2-13 Serial Ports ...... ...

  • Supermicro MBD-H8SML-IF-O - page 6

    T able of Contents Installing the OS/SA T A Driver ....................................................................... 2-23 Building a Driver Diskette ......................................................................... 2-23 Enabling SA T A RAID in the BIOS ................................................................. 2-24 Using the Do ...

  • Supermicro MBD-H8SML-IF-O - page 7

    Chapter 1: Introduction 1-1 Chapter 1 Introduction 1-1 Overview Checklist Congratulations on purchasing your computer motherboard from an acknowledged leader in the industry . Supermicro boards are designed with the utmost attention to detail to provide you with the highest standards in quality and performance. Please check that the following items ...

  • Supermicro MBD-H8SML-IF-O - page 8

    1-2 H8SML-7/i(F) SERVERBOARD USER'S MANUAL 1-2 Contacting Supermicro Headquarters Address: Super Micro Computer , Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. T el: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (T echnical Support) Web Site: www .supermicro.com Europe Addr ...

  • Supermicro MBD-H8SML-IF-O - page 9

    Chapter 1: Introduction 1-3 Figure 1-1. H8SML-7/i(F) Image ...

  • Supermicro MBD-H8SML-IF-O - page 10

    1-4 H8SML-7/i(F) SERVERBOARD USER'S MANUAL Notes: Jumpers not indicated are for test purposes only . Not all ports, jumpers or LED Indicators are available on all serverboards. Figure 1-2. H8SML-7/i(F) Motherboard Layout (not drawn to scale) JPW2 SA T A0/1 SA T A2/3 SAT A4/5 CPU1 Battery JIPMB1 L-SAS0 L-SAS1 L-SAS3 L-SAS2 L-SAS7 L-SAS6 L-SAS5 ...

  • Supermicro MBD-H8SML-IF-O - page 11

    Chapter 1: Introduction 1-5 H8SML-7/i(F) Quick Reference Jumper Description Default Setting JBT1 CMOS Clear (See Section 2-7) JI2C1/JI2C2 I2C to PCI-E Slot Enable/Disable Both Open (Disabled) JPB1 BMC Enable/Disable Pins 1-2 (Enabled) JPG1 VGA Enable/Disable Pins 1-2 (Enabled) JPL1/2 LAN 1/2 Enable/Disable Pins 1-2 (Enabled) JPS1 SAS Controller Ena ...

  • Supermicro MBD-H8SML-IF-O - page 12

    1-6 H8SML-7/i(F) SERVERBOARD USER'S MANUAL Connector Description 6-SGPIO1/6-SGPIO2 Serial General Purpose Input/Output Header for SAS COM1/2 COM1 Serial Port/Header F AN 1-5 Chassis/CPU Fan Headers IPMI LAN Dedicated IPMI LAN Port JD1 Speaker Header JF1 Front Panel Connector JIPMB1 System Management Bus Header (SMBus) JL1 Chassis Intrusion Hea ...

  • Supermicro MBD-H8SML-IF-O - page 13

    Chapter 1: Introduction 1-7 1-3 Motherboard Features CPU • One AMD Opteron 3000 series (AMD Socket AM3+ type) processors Memory • The H8SML-7/i(F) serverboard contains four (4) single/dual channel DIMM slots supporting up to 32 GB of Unbuffered ECC/non-ECC DDR3-1600/1333/1066 Mhz speed, 1 GB, 2 GB, 4 GB or 8 GB size SDRAM memory . Note: Refer t ...

  • Supermicro MBD-H8SML-IF-O - page 14

    1-8 H8SML-7/i(F) SERVERBOARD USER'S MANUAL ACPI Features • Microsoft OnNow • Slow blinking LED for suspend state indicator • BIOS support for USB keyboard • Hardware BIOS V irus protection • W ake-On-LAN (WOL) • Internal/external modem ring-on Onboard I/O • Six (6) SA T A ports supported by an on-chip SA T A controller (RAID 0, 1 ...

  • Supermicro MBD-H8SML-IF-O - page 15

    Chapter 1: Introduction 1-9 UD IMM/ 1600 1B UD IMM/ 1600 1A SOCKET AM3R 2 CP U H T 3 L i n k 16 / 16 - 2.6 G H z UD IMM/ 1600 2B UD IMM/ 1600 2A PCI-E G EN2 X 8 Slot7 PCI-E 2.0 x8 (in x16) SA TA x 6 Slot5 PCI-E 2.0 x8 PCI-E G EN2 x1 INTE L 82574 L RJ45 A-Link SP5100 BM C VGA WPCM450- R PCI LPC SMB us SI O W83527H G HW M W83795G SPI Flas h KB /MS RM ...

  • Supermicro MBD-H8SML-IF-O - page 16

    1-10 H8SML-7/i(F) SERVERBOARD USER'S MANUAL HyperT ransport T echnology HyperT ransport technology is a high-speed, low latency point to point link that was designed to increase the communication speed by a factor of up to 48x between integrated circuits. This is done partly by reducing the number of buses in the chipset to reduce bottlenecks ...

  • Supermicro MBD-H8SML-IF-O - page 17

    Chapter 1: Introduction 1-1 1 1-6 Power Con fi guration Settings This section describes the features of your motherboard that deal with power and power settings. Microsoft OnNow The OnNow design initiative is a comprehensive, system-wide approach to system and device power control. OnNow is a term for a PC that is always on but appears to be off a ...

  • Supermicro MBD-H8SML-IF-O - page 18

    1-12 H8SML-7/i(F) SERVERBOARD USER'S MANUAL 1-7 Power Supply As with all computer products, a stable power source is necessary for proper and reliable operation. It is even more important for processors that have high CPU clock rates. The H8SML-7/i(F) serverboard requires the use of proprietary power supplies. Please refer to the pinout inform ...

  • Supermicro MBD-H8SML-IF-O - page 19

    Chapter 2: Installation 2-1 Chapter 2 Installation 2-1 Standardized W arning Statements About Standardized W arning Statements The following statements are industry standard warnings, provided to warn the user of situations which have the potential for bodily injury . Should you have questions or experience difficulty , contact Supermicro's T ...

  • Supermicro MBD-H8SML-IF-O - page 20

    H8SML-7/i(F) SERVERBOARD USER'S MANUAL 2-2 W arnung Bei Einsetzen einer falschen Batterie besteht Explosionsgefahr . Ersetzen Sie die Batterie nur durch den gleichen oder vom Hersteller empfohlenen Batterietyp. Entsorgen Sie die benutzten Batterien nach den Anweisungen des Herstellers. Attention Danger d'explosion si la pile n'est pa ...

  • Supermicro MBD-H8SML-IF-O - page 21

    Chapter 2: Installation 2-3 Product Disposal W arning! Ultimate disposal of this product should be handled according to all national laws and regulations. 製品の廃棄 こ の製品を 廃棄処分す る 場合、 国の関係す る全 ての法律 ・ 条例に 従い処 理す る 必要が ありま す 。 警告 本产品的废弃处理? ...

  • Supermicro MBD-H8SML-IF-O - page 22

    H8SML-7/i(F) SERVERBOARD USER'S MANUAL 2-4 2-2 Static-Sensitive Devices Electrostatic Discharge (ESD) can damage electronic com ponents. T o prevent damage to your system board, it is important to handle it very carefully . The following measures are generally suf fi cient to protect your equipment from ESD. Precautions • Use a grounded wri ...

  • Supermicro MBD-H8SML-IF-O - page 23

    Chapter 2: Installation 2-5 2-3 Processor and Heatsink Installation Caution: Exercise extreme caution when handling and installing the processor . Always connect the power cord last and always remove it before adding, removing or changing any hardware components. Installation Procedure Follow the procedures as listed below to install the motherboar ...

  • Supermicro MBD-H8SML-IF-O - page 24

    H8SML-7/i(F) SERVERBOARD USER'S MANUAL 2-6 3. With the lever raised, locate and align pin 1 of the CPU socket with pin 1 of the CPU. Both are marked with a triangle. Place the processor into the AMD Socket AM3+ processor socket so that both are aligned, then carefully place the CPU into the socket. W arning: Do not drop the CPU on the socket, ...

  • Supermicro MBD-H8SML-IF-O - page 25

    Chapter 2: Installation 2-7 2-4 Mounting the Motherboard into a Chassis All motherboards have standard mounting holes to fi t different types of chassis. Make sure that the locations of all the mounting holes for both the motherboard and the chassis match. Although a chassis may have both plastic and metal mounting fasteners, metal ones are highly ...

  • Supermicro MBD-H8SML-IF-O - page 26

    H8SML-7/i(F) SERVERBOARD USER'S MANUAL 2-8 Support The H8SML-7/i(F) serverboard supports single/dual channel, DDR3-1600/1333/1066 Mhz speed Unbuffered ECC/non-ECC SDRAM. Populating two adjacent slots at a time with memory modules of the same size and type will result in interleaved (128-bit) memory , which is faster than non-interleaved (64-bi ...

  • Supermicro MBD-H8SML-IF-O - page 27

    Chapter 2: Installation 2-9 Memory Population for Optimal Performance # DIMMS Channel 1 Channel 2 2 DIMMs DIMM1A DIMM2A 4 DIMMs DIMM1A DIMM1B DIMM2A DIMM2B DIMM Module Population Con fi guration For memory to work properly , follow the tables below for memory installation: Per Channel DIMM Populations Options DIMM T ype DIMM A DIMM B Max. MHz, 1.5 ...

  • Supermicro MBD-H8SML-IF-O - page 28

    H8SML-7/i(F) SERVERBOARD USER'S MANUAL 2-10 2-7 I/O Port and Control Panel Connections The I/O ports are color coded to make setting up your system easier . See Figure 2-2 below for the colors and locations of the various I/O ports. 1 2 5 4 3 6 7 8 Rear I/O Ports 1. Keyboard 5. COM1 2. PS/2 Mouse 6. VGA Port 3. USB0/1 7. LAN1 4. IPMI LAN 8. LA ...

  • Supermicro MBD-H8SML-IF-O - page 29

    Chapter 2: Installation 2-1 1 Power Connectors A 24-pin main power supply connector(JPW1) and one 8-pin CPU PWR connector (JPW2) on the motherboard. These power connectors meet the SSI EPS 12V speci fi cation. In addition to the 24-pin A TX power connector , the 12V 8-pin CPU PWR connector at JPW2 must also be connected to your power supply . See ...

  • Supermicro MBD-H8SML-IF-O - page 30

    H8SML-7/i(F) SERVERBOARD USER'S MANUAL 2-12 NIC2 (Activity) LED The LED connections for LAN2 are on pins 9 and 10 of JF1. Attach LAN LED cables to display network activity . See the table on the right for pin de fi nitions. HDD LED The HDD LED connection is located on pins 13 and 14 of JF1. Attach the hard drive LED cable here to display disk ...

  • Supermicro MBD-H8SML-IF-O - page 31

    Chapter 2: Installation 2-13 Fan Header (F AN1~F AN5) Pin De fi nitions Pin# De fi nition 1 Ground 2 +12V 3 T achometer 4 PWR Modulation Fan Headers This motherboard has fi ve fan headers (Fan1 to Fan5). These 4-pin fans headers are backward compatible with 3-pin fans. However , fan speed control is available for 4-pin fans only . The fan speeds ...

  • Supermicro MBD-H8SML-IF-O - page 32

    H8SML-7/i(F) SERVERBOARD USER'S MANUAL 2-14 Universal Serial Bus Ports T wo Universal Serial Bus ports (USB 2.0) are located beside the Keyboard and Mouse PS2 ports (USB0/1). One additional T ype A port (USB6) is included on the motherboard. See the table on the right for pin de fi nitions. Universal Serial Bus Ports Pin De fi nitions (USB 0 ...

  • Supermicro MBD-H8SML-IF-O - page 33

    Chapter 2: Installation 2-15 A TX PS/2 Keyboard and PS/2 Mouse Ports The A TX PS/2 keyboard and PS/2 mouse are located next to the Back Panel USB Ports on the motherboard. See the table at right for pin de fi nitions. PS/2 Keyboard/Mouse Pin De fi nitions PS2 Keyboard PS2 Mouse Pin# De fi nition Pin# De fi nition 1 KB Data 1 Mouse Data 2 No Con ...

  • Supermicro MBD-H8SML-IF-O - page 34

    H8SML-7/i(F) SERVERBOARD USER'S MANUAL 2-16 Power LED/Speaker On the JD1 header , pins 1~3 are used for power LED indication, and pins 4-7 are for the speaker . See the tables on the right for pin de fi nitions. If you wish to use the onboard speaker , you should close pins 6~7 with a jumper . Connect a cable to pins 4~7 of JD1 to use an exte ...

  • Supermicro MBD-H8SML-IF-O - page 35

    Chapter 2: Installation 2-17 T rusted Platform Module Header The JTPM1 header is used to connect a T rusted Platform Module (TPM), available separately from a third-party vendor . A TPM is a security device that allows encryption and authentication of hard drives, disallowing access if the TPM associated with it is not installed in the system. See ...

  • Supermicro MBD-H8SML-IF-O - page 36

    H8SML-7/i(F) SERVERBOARD USER'S MANUAL 2-18 2-9 Jumper Settings Explanation of Jumpers T o modify the operation of the motherboard, jumpers can be used to choose between optional settings. Jumpers create shorts between two pins to change the function of the connector . Pin 1 is identi fi ed with a square solder pad on the printed circuit boar ...

  • Supermicro MBD-H8SML-IF-O - page 37

    Chapter 2: Installation 2-19 VGA Enable/Disable JPG1 allows you to enable or disable the VGA port. The default position is on pins 1 and 2 to enable VGA. See the table on the right for jumper settings. VGA Enable/Disable Jumper Settings (JPG1) Jumper Setting De fi nition Pins 1-2 Enabled Pins 2-3 Disabled I2C to PCI-Express Slot JI 2 C1/JI 2 C2 al ...

  • Supermicro MBD-H8SML-IF-O - page 38

    H8SML-7/i(F) SERVERBOARD USER'S MANUAL 2-20 SAS Enable/Disable Jumper Settings (JPS1) Jumper Setting De fi nition Pins 1-2 Enabled Pins 2-3 Disabled SAS Enable/Disable J P S 1 a l l o w s y o u t o e n a b l e o r d i s a b l e the S AS c ont rol ler. The def ault pos it ion i s on p ins 1 an d 2 to en abl e SAS . See t he t ab le on t he r i ...

  • Supermicro MBD-H8SML-IF-O - page 39

    Chapter 2: Installation 2-21 LAN1/LAN2 LEDs The Ethernet ports (located beside the VGA port) have two LEDs. On each Gb LAN port, one LED blinks to indicate activity while the other may be green, amber or off to indicate the speed of the connection. See the table on the right for the functions associated with the connection speed LED. LAN LED (Conne ...

  • Supermicro MBD-H8SML-IF-O - page 40

    H8SML-7/i(F) SERVERBOARD USER'S MANUAL 2-22 SA T A Ports There are no jumpers to configure the SA T A ports, which are designated SA T A0 through SA T A5. See the table on the right for pin de fi nitions. SA T A Ports Pin De fi nitions (SA T A0-SA T A5) Pin # De fi nition 1 Ground 2 TXP 3 TXN 4 Ground 5 RXN 6 RXP 7 Ground SAS Ports Pin De ? ...

  • Supermicro MBD-H8SML-IF-O - page 41

    Chapter 2: Installation 2-23 2-12 Enabling SA T A RAID Now that the hardware is set up, you must install the operating system and the SA T A RAID drivers, if you wish to use RAID with your SA T A drives. The installation procedure differs depending on whether you wish to have the operating system installed on a RAID array or on a separate non-RAID ...

  • Supermicro MBD-H8SML-IF-O - page 42

    H8SML-7/i(F) SERVERBOARD USER'S MANUAL 2-24 Figure 2-4. BIOS Setup Screen Enabling SA T A RAID in the BIOS Before installing the Windows operating system, you must change some settings in the BIOS. Boot up the system and hit the <Delete> key to enter the BIOS Setup Utlility . After the setup utility loads, 1. Use the arrow keys to move t ...

  • Supermicro MBD-H8SML-IF-O - page 43

    Chapter 2: Installation 2-25 Figure 2-6. Adaptec RAID Utility Program Screen Figure 2-5. DotHill RAID Utility Program Screen ...

  • Supermicro MBD-H8SML-IF-O - page 44

    H8SML-7/i(F) SERVERBOARD USER'S MANUAL 2-26 Using the DotHill and Adaptec RAID Utility The RAID Utility program allows you to de fi ne the drives you want to include in the RAID array and the mode and type of RAID. Installing the RAID Driver During OS Installation Y ou may also use the procedure below to install the RAID driver during the Win ...

  • Supermicro MBD-H8SML-IF-O - page 45

    Chapter 2: Installation 2-27 Figure 2-7. Driver/T ool Installation Display Screen 2-13 Installing Drivers The Supermicro Website contains drivers and utilities for your system at ftp://ftp. supermicro.com , some of which must be installed, such as the chipset driver . After downloading and installing the drivers and utilities, the display shown in ...

  • Supermicro MBD-H8SML-IF-O - page 46

    H8SML-7/i(F) SERVERBOARD USER'S MANUAL 2-28 SuperDoctor III The SuperDoctor® III program is a Web base management tool that supports remote management capability . It includes Remote and Local Management tools. The local management is called SD III Client. The SuperDoctor III program included on the CD-ROM that came with your motherboard allo ...

  • Supermicro MBD-H8SML-IF-O - page 47

    Chapter 2: Installation 2-29 Note: The SuperDoctor III program and User ’ s Manual can be downloaded from the Supermicro web site at http://www .supermicro.com/products/accessories/software/ SuperDoctorIII.cfm .For Linux, we recommend that you use the SuperoDoctor II application instead. Figure 2-9. SuperDoctor III Interface Display Screen (Remot ...

  • Supermicro MBD-H8SML-IF-O - page 48

    H8SML-7/i(F) SERVERBOARD USER'S MANUAL 2-30 2-14 Serverboard Battery Caution : There is a danger of explosion if the onboard battery is installed upside down, which will reverse its polarites (see Figure 2-10). This battery must be replaced only with the same or an equivalent type recommended by the manufacturer (CR2032). Dispose of used batte ...

  • Supermicro MBD-H8SML-IF-O - page 49

    3-1 Chapter 3: T roubleshooting Chapter 3 T roubleshooting 3-1 T roubleshooting Procedures Use the following procedures to troubleshoot your system. If you have followed all of the procedures below and still need assistance, refer to the ‘T echnical Support Procedures’ and/or ‘Returning Merchandise for Service’ section(s) in this chapter . ...

  • Supermicro MBD-H8SML-IF-O - page 50

    3-2 H8SML-7/i(F) SERVERBOARD USER'S MANUAL No Video 1. If the power is on but you have no video, remove all the add-on cards and cables. 2. Use the speaker to determine if any beep codes exist. Refer to Appendix A for details on beep codes. Note: If you are a system integrator , V AR or OEM, a POST diagnostics card is recommended. For I/O port ...

  • Supermicro MBD-H8SML-IF-O - page 51

    3-3 Chapter 3: T roubleshooting 2. BIOS upgrades can be downloaded from our web site. Note: Not all BIOS can be fl ashed depending on the modi fi cations to the boot block code. 3. If you still cannot resolve the problem, include the following information when contacting us for technical support: • Motherboard model and PCB revision number • ...

  • Supermicro MBD-H8SML-IF-O - page 52

    3-4 H8SML-7/i(F) SERVERBOARD USER'S MANUAL Question: What's on the CD that came with my motherboard? Answer: The supplied compact disc has quite a few drivers and programs that will greatly enhance your system. We recommend that you review the CD and install the applications you need. Applications on the CD include chipset drivers for Win ...

  • Supermicro MBD-H8SML-IF-O - page 53

    Chapter 4: BIOS 4-1 Chapter 4 BIOS 4-1 Introduction This chapter describes the AMIBIOS™ Setup utility for the H8SML-7/i(F) serverboard. The 16 Mb AMI BIOS® is stored in a fl ash chip and can be easily upgraded using a fl oppy disk-based program. Note: Due to periodic changes to the BIOS, some settings may have been added or deleted and might n ...

  • Supermicro MBD-H8SML-IF-O - page 54

    4-2 H8SML-7/i(F) SERVERBOARD USER'S MANUAL 4-2 Main Menu Figure 4-1: Main BIOS Screen When you fi rst enter AMI BIOS Setup Utility , you will see the Main Menu screen. Y ou can always return to the Main Menu by selecting the Main tab on the top of the screen with the arrow keys. The Main Menu screen provides you with a system overview , which ...

  • Supermicro MBD-H8SML-IF-O - page 55

    Chapter 4: BIOS 4-3 4-3 Advanced Settings Menu  Boot Feature Quick Boot If Enabled, this option will skip certain tests during POST to reduce the time needed for the system to boot up. The options are Enabled and Disabled. Quiet Boot If Disabled, normal POST messages will be displayed on boot-up. If Enabled , this display the OEM logo instead of ...

  • Supermicro MBD-H8SML-IF-O - page 56

    4-4 H8SML-7/i(F) SERVERBOARD USER'S MANUAL Power Button Function This sets the function of the power button when you turn off the system. Options include 4-second Overide and Instant Off . Restore on AC Power Loss This sets the action that occurs when an AC power loss occurs. Options include Power Off, Power On and Last State . Resume On RTC A ...

  • Supermicro MBD-H8SML-IF-O - page 57

    Chapter 4: BIOS 4-5 Power Cap This option can decide the highest P-state in the OS. Options include P-state 0 through P-state 4. HPC Mode This option Enables or Disables support for P-state HPC mode. CPB Mode This option speci fi es the method of core performance boost environment. Options include Disabled and Auto . CPU Down Core Mode This option ...

  • Supermicro MBD-H8SML-IF-O - page 58

    4-6 H8SML-7/i(F) SERVERBOARD USER'S MANUAL CS Sparing Enable This setting will reserve a spare memory rank in each node when enabled. Options are Enabled and Disabled . Power Down Enable This option allows you to Enable or Disable DDR power down mode. Bank Swizzle Mode This setting Enables or Disables the bank swizzle mode.  ECC Con fi gur ...

  • Supermicro MBD-H8SML-IF-O - page 59

    Chapter 4: BIOS 4-7  SouthBridge Con fi guration OHCI/EHCI HC Device Functions These settings allow you to either Enable or Disable functions for OHCI or EHCI bus devices. USB 2.0 Controller Mode Use this setting to con fi gure the USB 2.0 Controller in either Hi-Speed (480 Mps) or Full Speed (12 Mps) mode. Options include Enabled (Hi-Speed Mo ...

  • Supermicro MBD-H8SML-IF-O - page 60

    4-8 H8SML-7/i(F) SERVERBOARD USER'S MANUAL PATA Channel Con fi guration This allows you to set PATA channel con fi guration. Options include S ATA a s Primary or SA T A as secondary .  Primary/Secondary/Third/Fourth IDE Master/Slave LBA/Large Mode LBA (Logical Block Addressing) is a method of addressing data on a disk drive. The option ...

  • Supermicro MBD-H8SML-IF-O - page 61

    Chapter 4: BIOS 4-9 S.M.A.R.T . Self-Monitoring Analysis and Reporting T echnology (SMART) can help predict impending drive failures. Select "Auto" to allow BIOS to auto detect hard disk drive support. Select "Disabled" to prevent AMI BIOS from using the S.M.A.R.T . Select "Enabled" to allow AMI BIOS to use the S.M.A.R ...

  • Supermicro MBD-H8SML-IF-O - page 62

    4-10 H8SML-7/i(F) SERVERBOARD USER'S MANUAL PCIE x8 Slot7 These settings Enable or Disable the speci fi ed PCIE slot in your system. Onboard LAN Option ROM Select This setting allows you to select the onboard LAN option ROM for iSCSI or PXE . Note : Y ou must enable ONL Y LAN1 when the iSCSI support option is speci fi ed. Load Onboard LAN 1 ...

  • Supermicro MBD-H8SML-IF-O - page 63

    Chapter 4: BIOS 4-1 1  Remote Access Con fi guration Remote Access Use this option to Enable or Disable Remote Access in your system. If enabled, the settings below will appear . Serial Port Number Use this setting to select the serial port for console redirection. Options include COM1, COM2* . The displayed base address and IRQ for the serial ...

  • Supermicro MBD-H8SML-IF-O - page 64

    4-12 H8SML-7/i(F) SERVERBOARD USER'S MANUAL  Hardware Health Con fi guration CPU Overheat Alarm This setting allows you to specify the type of alarm for CPU overheating. Options include The Early Alarm and The Default Alarm . Fan Speed Control Modes This feature allows the user to determine how the system will control the speed of the onbo ...

  • Supermicro MBD-H8SML-IF-O - page 65

    Chapter 4: BIOS 4-13 When COA (either Early or Default Alarm) is enabled , the following actions are required to be executed: • System overheating LED is required to be ON and to solid red. • Onboard buzzer or speaker is required to be ON and to be a continuous sound. • All system fans are required to be operated at full speed. • System mon ...

  • Supermicro MBD-H8SML-IF-O - page 66

    4-14 H8SML-7/i(F) SERVERBOARD USER'S MANUAL ACPI V ersion Features Use this setting the determine which ACPI version to use. Options are ACPI v1.0, ACPI v2.0 and ACPI v3.0. WHEA Support Use this setting to Enable or Disable Windows Hardware Error Architecture.  IPMI Con fi guration This menu shows static information about the IPMI fi rmwa ...

  • Supermicro MBD-H8SML-IF-O - page 67

    Chapter 4: BIOS 4-15 IP Address This submenu sets the IP address source as either Static or DHCP . Selecting Static allows you to manually set the IP Address, Subnet Mask and Gateway Address. In the fi eld provided here enter the IP address in the decimal form of xxx.xxx. xxx.xxx with xxx having a value of less than 256 and in decimal form only Th ...

  • Supermicro MBD-H8SML-IF-O - page 68

    4-16 H8SML-7/i(F) SERVERBOARD USER'S MANUAL 4-3 Security Menu AMI BIOS provides a Supervisor and a User password. If you use both passwords, the Supervisor password must be set fi rst. Change Supervisor Password Select this option and press <Enter> to access the sub menu, and then type in the password. Change User Password Select this o ...

  • Supermicro MBD-H8SML-IF-O - page 69

    Chapter 4: BIOS 4-17  Hard Disk Drives This feature allows you to specify the boot sequence from the list of available hard disk drives. A device that is in parenthesis has been disabled in the corresponding type menu.  CD/DVD Drives This feature allows you to specify the boot sequence from the list of available CD/ DVD drives. A device ...

  • Supermicro MBD-H8SML-IF-O - page 70

    4-18 H8SML-7/i(F) SERVERBOARD USER'S MANUAL 4-5 Exit Menu Select the Exit tab from AMI BIOS Setup Utility screen to enter the Exit BIOS Setup screen. Save Changes and Exit When you have completed the system con fi guration changes, select this option to leave BIOS Setup and reboot the computer , so the new system con fi guration parameters c ...

  • Supermicro MBD-H8SML-IF-O - page 71

    Appendix A BIOS Error Beep Codes During the POST (Power-On Self-T est) routines, which are performed each time the system is powered on, errors may occur . Non-fatal errors are those which, in most cases, allow the system to continue the boot-up process. The error messages normally appear on the screen. Fatal errors are those which will not allow t ...

  • Supermicro MBD-H8SML-IF-O - page 72

    A-2 H8SML-7/i(F) SERVERBOARD USER'S MANUAL Notes ...

  • Supermicro MBD-H8SML-IF-O - page 73

    B-1 Appendix B: BIOS POST Checkpoint Codes Appendix B BIOS POST Checkpoint Codes When AMIBIOS performs the Power On Self T est, it writes checkpoint codes to I/O port 0080h. If the computer cannot complete the boot process, diagnostic equipment can be attached to the computer to read I/O port 0080h. B-1 Uncompressed Initialization Codes The uncompr ...

  • Supermicro MBD-H8SML-IF-O - page 74

    B-2 H8SML-7/i(F) Serverboard User ’s Manual B-2 Bootblock Recovery Codes The bootblock recovery checkpoint codes are listed in order of execution: Checkpoint Code Description E0h The onboard fl oppy controller if available is initialized. Next, beginning the base 512 KB memory test. E1h Initializing the interrupt vector table next. E2h Initializ ...

  • Supermicro MBD-H8SML-IF-O - page 75

    B-3 Appendix B: BIOS POST Checkpoint Codes B-3 Uncompressed Initialization Codes The following runtime checkpoint codes are listed in order of execution. These codes are uncompressed in F0000h shadow RAM. Checkpoint Code Description 03h The NMI is disabled. Next, checking for a soft reset or a power on condition. 05h The BIOS stack has been built. ...

  • Supermicro MBD-H8SML-IF-O - page 76

    B-4 H8SML-7/i(F) Serverboard User ’s Manual Checkpoint Code Description 2Ah Bus initialization system, static, output devices will be done next, if present. See the last page for additional information. 2Eh Completed post-video ROM test processing. If the EGA/VGA controller is not found, performing the display memory read/write test next. 2Fh The ...

  • Supermicro MBD-H8SML-IF-O - page 77

    B-5 Appendix B: BIOS POST Checkpoint Codes Checkpoint Code Description 52h The memory above 1 MB has been tested and initialized. Saving the memory size information next. 53h The memory size information and the CPU registers are saved. Entering real mode next. 54h Shutdown was successful. The CPU is in real mode. Disabling the Gate A20 line, parity ...

  • Supermicro MBD-H8SML-IF-O - page 78

    B-6 H8SML-7/i(F) Serverboard User ’s Manual Checkpoint Code Description 97h Initialization before the C800 adaptor ROM gains control has completed. The adaptor ROM check is next. 98h The adaptor ROM had control and has now returned control to BIOS POST . Performing any required processing after the option ROM returned control. 99h Any initializat ...

Fabricant Supermicro Catégorie Motherboard

Les documents que nous recevons du fabricant de l'appareilSupermicro MBD-H8SML-IF-O peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Supermicro
- manuels d’utilisations MBD-H8SML-IF-O
- fiches produit Supermicro
- dépliants
- ou étiquettes-énergie Supermicro MBD-H8SML-IF-O
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Supermicro MBD-H8SML-IF-O.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Supermicro MBD-H8SML-IF-O, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Supermicro MBD-H8SML-IF-O. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Supermicro MBD-H8SML-IF-O.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Supermicro MBD-H8SML-IF-O, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Supermicro MBD-H8SML-IF-O par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Supermicro MBD-H8SML-IF-O.

Le manuel d’utilisation complet Supermicro, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Supermicro MBD-H8SML-IF-O - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Supermicro MBD-H8SML-IF-O, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lSupermicro MBD-H8SML-IF-O qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Supermicro MBD-H8SML-IF-O - qui devraient nous aider dans les premières étapes lors de l'utilisation Supermicro MBD-H8SML-IF-O
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Supermicro MBD-H8SML-IF-O
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Supermicro MBD-H8SML-IF-O dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Supermicro MBD-H8SML-IF-O?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Supermicro MBD-H8SML-IF-O, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Supermicro MBD-H8SML-IF-O il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)