Manuel d’utilisation Airlink101 AWLC6070

35 pages 1.28 mb
Télécharger

Aller à la page of 35

Summary
  • Airlink101 AWLC6070 - page 1

    150N Draft 802.11n Wireless Cardbus Adapter Model # AWLC6070 User’s Manual Rev. 1.0 ...

  • Airlink101 AWLC6070 - page 2

    2 Table of Contents 1. Intr oducti on ................................................................................................................ .3 1.1 Package Contents ................................................................................................. 3 1.2 Feat ures ............................................................. ...

  • Airlink101 AWLC6070 - page 3

    3 1. Introduction Congratulations on your purchase of the 150N Draft 802.11n Wireless Cardbus Adapter. The 150N Cardbus Adapter provides wirele ss data rate of up to 300 Mbps* downlink and 150Mbps* uplink when used with other AirLink101® 150N or 300N wireless products. The high bandwidth combined with ex tended wireless coverage delivers fast and ...

  • Airlink101 AWLC6070 - page 4

    4 2. Inst allation This section provides instructions on how to install the 150N Draft 802.11n Wireless Cardbus Adapter . The driver is install ed along with the utility. Step 1 Insert the Cardbus adapter into an ava ilable Cardbus slot and turn on your computer. Step 2 After turning on the comput er, Windows will launch the Found New Hardware Wiza ...

  • Airlink101 AWLC6070 - page 5

    5 Note: If the Autorun screen doesn’t appear automat ically, or if you get a blank white screen, go to Start , Run , and type D:UtilitySetup.exe (where D is the letter of your CD drive) and click OK . Windows Vista users : At this point, you may get a warning message like the one below. Make sure that you click Allo w to continue with the insta ...

  • Airlink101 AWLC6070 - page 6

    6 Step 4 Click Next at the welcome screen. ...

  • Airlink101 AWLC6070 - page 7

    7 Step 5 Click Next to accept the default destination folder. ...

  • Airlink101 AWLC6070 - page 8

    8 Step 6 Click Continue Anyway at the Windows Logo Screen. (For Windows 2000, click Yes at the Digital Signatu re Not Found prompt). For Windows Vista, click the Install this driver software anyway button when the security warning appears. ...

  • Airlink101 AWLC6070 - page 9

    9 Step 7 Click Yes, I want to restart my computer now and then Finish to restart your computer. Step 8 After the computer is re started, Windows will ask to connect to Windows Update, select No, not this time and click Next . If this screen does not appear, you can skip to section 2.2. ...

  • Airlink101 AWLC6070 - page 10

    10 Step 9 Select Install the software automatically and click Next . ...

  • Airlink101 AWLC6070 - page 11

    11 Step 10 Click Continue Anyway at the Windows Logo Screen. (For Windows 2000, click Yes at the Digital Signatur e Not Found prompt). For Windows Vista, click the Install this driver software anyway button when the security warning appears. ...

  • Airlink101 AWLC6070 - page 12

    12 Step 11 Click Finish . ...

  • Airlink101 AWLC6070 - page 13

    13 3. Configuring the Adapter This section describes how to connect your wireless adapter to a wireless network. Note to Windows XP Users: You must disable the Wireless Zero Configur ation Utility in order to use the bundled Wireless Utility. Please follow the steps below to disable XP’s wireless utility. Windows Vista users can skip the followin ...

  • Airlink101 AWLC6070 - page 14

    14 Step 1 To open the utility, double click on the Wireless Monitor icon in the system tray at the bottom right-hand corner of your screen. Step 2 Go to the AP List tab, select the SSID (Network Name) of the wireless network you wish to connect to, and click Connect . ...

  • Airlink101 AWLC6070 - page 15

    15 If the network you are attempting to connect to is configured for encryption, you will see an orange lock icon next to the network. ...

  • Airlink101 AWLC6070 - page 16

    16 When you click on it and click connect, a box will pop up requesting the wireless encryption key for the router. Enter t he encryption key into the box and click OK . ...

  • Airlink101 AWLC6070 - page 17

    17 Step 3 You should now be connected. You shoul d see “Connected” in the top, right hand corner, and there will be a blue circle ar ound the antenna icon next to the network name. Troubleshooting : If you are experi encing problems with the connection (unable to connect, low signal strength, slow connection speed, not working, unstable wireles ...

  • Airlink101 AWLC6070 - page 18

    18 4. Wireless Monitor This section describes the various functi ons of the Wireless Monitor that you can configure, including the setti ngs of wireless encryption. 4.1 Wireless Information The Wireless Information box at the top of t he window provides you with the status of the current connection, includ ing signal, network name (SSI D), IP Addre ...

  • Airlink101 AWLC6070 - page 19

    19 4.2 AP List The AP List tab displays all the available wire less networks detected by the Wireless Adapter. Simply select the wireless network you wish to connect to and click Connect . If you have created multiple profiles, you can use the profile chooser at the bottom to select the specific profile you want to use. Then click Activate to enabl ...

  • Airlink101 AWLC6070 - page 20

    20 4.3 Profile Settings This section provides instructions on using the Profile Settings section of the wireless monitor. The My Wireless Networks box lists the different pr ofiles you’ve created for the different networks that you us e. Profiles are automatical ly created and added to this list when you connect to new networks. You can also manu ...

  • Airlink101 AWLC6070 - page 21

    21 The Profile Settings box will appear allowing you to specify the settings for your new profile or change settings for your existing profile. Once you are finished entering the settings, click OK to save the changes. ...

  • Airlink101 AWLC6070 - page 22

    22 4.4 Configuring Encryption This section describes the different types of encryption available and how to configure them. In most cases, encry ption will be automatically configured and all that will need to be entered is the key, as described in Section 3 Step 2 . The only time you will need to manually configure the encryption settings is if yo ...

  • Airlink101 AWLC6070 - page 23

    23 These three are meant for the home user: None: No encryption in use WEP: The most popular but least se cure form of encryption WPA/WPA2-PSK: The most secure and recommended level of encryption The remaining two are for use in a corporat e environment that utilizes authentication servers. If you do not know if you have an authentication server, y ...

  • Airlink101 AWLC6070 - page 24

    24 Configuring WEP encryption Select WEP from the Set Security Option box. Under Wired Equivalent Privacy (WEP) , you will want to select Shared or Open , depending on the router settings. In the Key box, you will want to type in the encrypt ion key for the rout er. If you check the Show text in the passw ord field box, your key will appear in the ...

  • Airlink101 AWLC6070 - page 25

    25 Configuring WPA/WPA2-PSK Encryption (for home users) Select WPA/WPA2-PSK from the Set Security Option box. Under Passphrase Settings select either TKIP or AES depending on the settings for your router. Enter the encryption key into the KEY box. ...

  • Airlink101 AWLC6070 - page 26

    26 Configuring WPA/WPA2 Encryption (for corporate networks) Select WPA/WPA2 from the Set Security Option box. Under Advanced Security Settings select either TKIP or AES depending on the settings for your router. Click on Advanced Config to enter your aut hentication settings. The adapter supports EAP-TLS, LEAP, EAP- TTLS, and PEAP authentication me ...

  • Airlink101 AWLC6070 - page 27

    27 Configuring 802.1x authentication (for corporate networks) Select 802.1x from the Set Security Option box. Click on Advanced Config to enter your aut hentication settings. ...

  • Airlink101 AWLC6070 - page 28

    28 The adapter supports EAP-TLS, LEAP, EAP- TTLS, and PEAP authentication methods. Refer to your system administrator for inform ation about what sett ings you should enter here. 4.5 Ad-hoc and Peer-to-Peer Wireless Networks Ad-hoc networking is used when you want to connect two or more computers together but you don’t have a router. In ad-hoc mo ...

  • Airlink101 AWLC6070 - page 29

    29 Open the Wireless Monitor. Click on Profile Setting , then click on New . The profile settings box will appear. First change the network type to Adhoc . (Infrastructure is for when you are using a router). Enter a profile name into the Profile Name box so that you can identify the profile. Type in a network nam e (SSID) into the SSID box Select ...

  • Airlink101 AWLC6070 - page 30

    30 Once that is done, click on the AP List . Select your new profile from the profile chooser and click Activate to enable the profile. You will need to configure all other comput ers that you are planni ng on connecting to your ad-hoc network with the same settings that you input on this screen. Every computer has to be set up exactly the same. If ...

  • Airlink101 AWLC6070 - page 31

    31 4.6 About The About tab shows the Utility, Driver, and Firmware version as well as the MAC address of the adapter. ...

  • Airlink101 AWLC6070 - page 32

    32 Appendix A – Features Frequency Band • 2.4~2.5 GHz Standards • IEEE 802.11b / 802.11g • 802.11n draft 2.0 Interface • Cardbus Security • WPA-PSK (TKIP) • WPA2-PSK (AES) Transmitted Power • 802.11b: 17 dBm@1TX; 20 dBm@2TX • 802.11g: 13 dBm@1TX; 16 dBm@2TX • Draft 11n: 13 dBm@1TX; 16 dBm@2TX Data Rate • Receiving: Up to 3000* ...

  • Airlink101 AWLC6070 - page 33

    33 Appendix B – Information Federal Communication Commission Interference S t atement This equipment has been tested and found to co mply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rule s. These limits are designed to provide reasonable protection against harmful interferenc e in a residential installation. This ...

  • Airlink101 AWLC6070 - page 34

    34 European Union Notice: Radio products with the CE marking comply with the R&TTE Direct ive (1999/5/EC), the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community. Compliance with these directives implies co nformity to the following European Norms: z EN 60950 Product Safety z ...

  • Airlink101 AWLC6070 - page 35

    35 T echnical Support E-mail: support@airlink101.com Toll Free: 1-888-746-3238 Web Site: www.airlink101.com *Theoretical maximum wireless signal rate derived from IEEE 802.11g standard and IEEE 802.11n draft specification version 2.0. Actual data throughput will vary. Network conditions and environmenta l factors, including volume of network traffi ...

Fabricant Airlink101 Catégorie Network Card

Les documents que nous recevons du fabricant de l'appareilAirlink101 AWLC6070 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Airlink101
- manuels d’utilisations AWLC6070
- fiches produit Airlink101
- dépliants
- ou étiquettes-énergie Airlink101 AWLC6070
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Airlink101 AWLC6070.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Airlink101 AWLC6070, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Airlink101 AWLC6070. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Airlink101 AWLC6070.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Airlink101 AWLC6070, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Airlink101 AWLC6070 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Airlink101 AWLC6070.

Le manuel d’utilisation complet Airlink101, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Airlink101 AWLC6070 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Airlink101 AWLC6070, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lAirlink101 AWLC6070 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Airlink101 AWLC6070 - qui devraient nous aider dans les premières étapes lors de l'utilisation Airlink101 AWLC6070
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Airlink101 AWLC6070
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Airlink101 AWLC6070 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Airlink101 AWLC6070?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Airlink101 AWLC6070, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Airlink101 AWLC6070 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)