-
Eizo 630LT-GR-N - page 1
Touch Panel LCD Monitor integrated Windows-based Terminal This is the manual for the following software version. * Microsoft Windows CE: 4.10 Rev. 2.7.1 or later * Microsoft Terminal Server Client: Ver. 7.2.0 or later * ICA Client: Ver. 7.23 or later Please confirm the version of the software built in eClient, and refer to the suited User's Ma ...
-
Eizo 630LT-GR-N - page 2
User ’ s Manual V er sion List A handling description changes with versions of the software built in eClient. Please refer to below . NO TE • The v ersion of software b uilt in eClient can be chec ked with a [System]-[ICA] tab of [T er minal Proper ties]. OS: Microsoft Windows CE .NET Software Manual Microsoft Windows CE Microsoft Windows T erm ...
-
Eizo 630LT-GR-N - page 3
SAFETY SYMBOLS This manual uses the safety symbols below . They denote critical information. Please read them carefully . W ARNING Failure to abide b y the information in a W ARNING ma y result in serious in j ur y and can be life threatening. CA UTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or ...
-
Eizo 630LT-GR-N - page 4
T ABLE OF CONTENTS 1. INTRODUCTION ..................................................................................... 5 1-1. General De scription ...................................................................................... 5 1-2. Feat ures ................................................................................................. ...
-
Eizo 630LT-GR-N - page 5
1. INTR ODUCTION Thank you very muc h for purchasing the EIZO eClient 630L T -GR/630L T -GR-N. 1-1. General Description The eClient 630L T -GR/630L T -GR-N connects with a W indows T erminal Server*, which installed Microsoft Wi ndows NT Server 4.0 T erminal Server Edition or Windows 2000 Server/Advanced Ser ver/Datacenter Server , and this product ...
-
Eizo 630LT-GR-N - page 6
1-3. P ac kage Contents Please make sure that all the items listed are in the pa ckage. Please contact your local dealer for assistance if any of the listed items are missing or damaged. • eClient 630L T -GR/630L T -GR-N • Mouse (FDM-310) • Po w e r C o r d • Screw (M4 x 12 mm) x 4 • User’ s Manual (includes Limited Warr anty) • 2 Sti ...
-
Eizo 630LT-GR-N - page 7
1-4. Contr ols & Connectors Fr ont (4) (3) (2) (1) (1) P ower button (2) P ower Indicator Color 630L T -GR/630L T -GR-N status Green • Operation • Screen sav er mode Y ellow P ower sav e mode Off • P ower off (W ake on LAN standb y) (3) Speak ers (4) V olume Control NO TE • When tur ning off/on the unit, leav e the unit off fo r a fe w ...
-
Eizo 630LT-GR-N - page 8
Rear (14) (15) (17) (16) (5) (6) (7) (8) (9) (10) (11) (13) (12) (5) Mouse Connector (6) K eyboard Connector (7) Serial P or t (RS-232C) (8) P arallel Connector (9) P ower Connector (10) Ether net Connector (10 Base-T , 100 Base-TX) (11) Headphone Connector (12) Microphone Connector (13) USB P or t (Downstream) x 2 (14) PC Card Slot (15) Security L ...
-
Eizo 630LT-GR-N - page 9
2. CONNECTING THE eClient 630L T -GR/630L T -GR-N This chapter explains how to connect the eClient 630L T -GR/630L T -GR-N to a WTS. 2-1. Setting up the eClient 630L T -GR/630L T -GR-N Please observe the following cautions when connec ting the 630L T -GR/630L T -GR-N. WA R N I N G Place the eClient 630L T -GR/630L T -GR-N on a strong, stable surfac ...
-
Eizo 630LT-GR-N - page 10
1. In case of connecting the WTS through LAN: Connect the eClient 630L T - GR/630L T - GR-N to the network with an Ethernet cable. In case of a dial-up or dial-in connection: Connect the eClient 630L T - GR/630L T -GR-N to a modem or a modem card. NO TE • Please remov e the lid on the side of the 630L T -GR/630L T -GR-N bef ore connecting a LAN c ...
-
Eizo 630LT-GR-N - page 11
3. SETTING U P the eClient 630L T -GR/630L T -GR-N This chapter presents how to prep are for a connection with a WTS when the eClient 630L T -GR/630L T -GR-N s tarts up for the first time. 1. T urn on the eClient 630L T -GR/630L T -GR-N. The power indicator turns green and a picture appears on the screen. NO TE • When no picture is displa yed, or ...
-
Eizo 630LT-GR-N - page 12
3. “Calibration measured” window is displayed when you finished. Click the “Enter” key to accept the se ttings. 4. “eClient Setup W i zard” is displayed. (Set up the 630L T -GR/630L T -GR-N according to directions of the displayed dialog box.) 12 3. SETTING UP the eCli ent 630L T -GR/630L T -GR-N ...
-
Eizo 630LT-GR-N - page 13
5. End User License Agreement page is displayed. Read the content and c lick [Accept] to continue. 3. SETTING UP the eCli ent 630L T -GR/630L T -GR-N 13 ...
-
Eizo 630LT-GR-N - page 14
6. Set up the network environment. [Terminal Name] ................ Type the name to identify this unit on the network. Click [Network Properties] and set up connectio n information according to the connection method to WTS/W eb server . Connection method Reference p age • In case of connecting the WTS/Web through Built-in LAN p .15 • In case o ...
-
Eizo 630LT-GR-N - page 15
In case of connecting the WTS/W eb through Built-in LAN: (1) Double-click [Built-in LAN] icon. [IP Address] ........................ Type the IP address of the unit. [Name Servers] ................... Ty pe the IP addre ss of each server when DNS or WINS is used. [Advanced].......................... Type the transmissi on speed and MAC Address of a ...
-
Eizo 630LT-GR-N - page 16
In case of connecting with a Cisco wireles s LAN card/Agere wireless LA N card: (1) Double-click [CISCO1]/[WLAGS461] icon. [IP Address] ........................ Type the IP address of the unit. [Name Servers] .................... Ty pe the IP addre ss of each server when DNS or WINS is used. [Wireless Networks] ................................... S ...
-
Eizo 630LT-GR-N - page 17
In case of a dial-up connection: (1) Double-click [Make New Connection] icon. (2) T ype a name for the connection and select the connection type (Dial-Up Connection). (3) Select a model, set up the TCP/IP settings and Security settin gs. (4) T ype the phone number for the connection. (5) In case of a dial-up connection, the information of local loc ...
-
Eizo 630LT-GR-N - page 18
7. Set up the desktop area. [Desktop Area and Refresh Frequency] ................................... Set the resolution/refresh rate. (630LT-GR/630LT- GR-N supports 1024 x 768 @60 Hz only). [Desktop Colors]................. S e t the desktop color (256 Colors / High color) of the following. - Windows CE desktop (before WTS connection ) - Windows de ...
-
Eizo 630LT-GR-N - page 19
8. Set up the browser connection. Set up if you are setting up a web browse r connection. (1) Select [Internet Options] icon and click [Open]. [General] ............................. Set up the browser. [Connection] ....................... Set up the connection me thod to the browser. [Security] ............................. Set up the security for ...
-
Eizo 630LT-GR-N - page 20
10. Setup the Local sender’ s setting Setup if you are connecting to WTS/W eb server by dial-up connection. (1) S elect [Dialing] icon and click [Open] icon. [Location name] .................. Choose the sender’ s location (click [New] to add a new sender’s location). [Local Settings are:]............. Setup the local settings. 11. The last p ...
-
Eizo 630LT-GR-N - page 21
4. A DDING & CHANGING A CONNETION NAME This chapter shows how to add, delete, and modi fy connection names to a WTS. All the settings are managed in th e “T erminal Connection Manager ”. 4-1. Ad ding a Connection Name These are settings for the server connection. Each protocol has different settings. Please install the appropriate settings. ...
-
Eizo 630LT-GR-N - page 22
In Use of RDP Pr otocol 1. Display [T erminal Connection Manager]. Click the [Configure] tab and [Add...] to set the connection information of the WTS. 2. Protocol selection dialog box is displayed. Select the “Microsoft Remo te Desktop Client” (RDP). 3. “WTS Connection W izard” is displayed. (Setup as following the wizard.) (1) T ype the c ...
-
Eizo 630LT-GR-N - page 23
In Use of the IC A pr otocol 1. Display [T erminal Connection Manager]. Click the [Configure] tab and [Add...] to set the connection information of the WTS. 2. “New Connection” dialog box is displayed on the screen. Select the “Citrix ICA Client” (ICA). 3. “Specify Connection T ype” is displayed. (Setup as following the wizard.) (1) Cho ...
-
Eizo 630LT-GR-N - page 24
NO TE • Please repeat the step 2 to 3 when y ou adding another connection name. 4-2. Setting an A utostar t Connection This function configures a connection to start automatically each tim e the eClient 630L T -GR/630L T -GR-N is turne d on. (This function is available for a LAN connection.) Select the desired connectio n name for Autostart Conne ...
-
Eizo 630LT-GR-N - page 25
5. LOGON & LOGOFF This chapter shows how to log on to an d log off from a WTS. 5-1. Logon to a WTS / Logoff from a WTS Logon to a WTS 1. Follow the direction from (1) to (3), depending on the environment of the eClient 630L T -GR/630L T -GR-N. (1) T o connect and log on to a WTS throu gh local network: Go to step 2. (2) T o connect and log on t ...
-
Eizo 630LT-GR-N - page 26
Multi Session Y ou can log on to the WTS with the several connec tion names, and switch the active sessions. 1. Logon with a Connection Name, as following the previous steps. 2. Press [Ctrl] + [Alt] + [E nd] keys after logon. 3. “T erminal Connection Manager” is displayed. Selec t another Connection Name to log on to, and click [Connect]. (Or d ...
-
Eizo 630LT-GR-N - page 27
Logoff fr om the WTS If y our eClient 630L T -GR/630L T -GR-N starts its operation with a desktop 1. Logoff from the WTS. (1) C lose all applications. (2) Select [Start ] on the taskbar . (3) Microsoft W indows NT Server 4.0 T erminal Server Edition: Select [Logoff]. Microsoft W indows 2000 Server / Advanced Server / Datacenter Server: Select [Shut ...
-
Eizo 630LT-GR-N - page 28
If y our eClient 630L T -GR/630L T -GR-N starts its operation with an application 1. Log off from the WTS. Close applications to log off from the WTS. “T erminal Connection Manager” is displayed. If a dial-up connection is running, click the active button of the win dow on the right bottom of the screen. Clicking the button disconnects the dial ...
-
Eizo 630LT-GR-N - page 29
5-2. Opening/Closing a Local W e b Br o wser Opening a Local W eb Bro wser 1. Please follow the directions relev ant on the environment of the eClient 630L T -GR/630L T -GR-N. (1) If the web server is on the same network (Intranet): Go to step 2. (2) If the web server is not on the same network, and a dial-up connection is needed (Internet): Click ...
-
Eizo 630LT-GR-N - page 30
Closing a Local W eb Bro wser 1. Close the local web browser . Select [Close] under the [File] on the menu bar and clos e the local web browser . Return to the “T erminal Connection Manager” dialog box. If a dial-up connection is being made, clic k the active button of the window on the right of the screen. Clicking the button disconnects the d ...
-
Eizo 630LT-GR-N - page 31
6. USING THE TERMINAL PR OPER TIES This chapter presents how to mo dify all settings of the eClient 630L T -GR/630L T -GR-N using the “T erminal Properties”. T o display the “T erminal Properties” durin g logging on, press F2 in the “T erminal Connection Manager” di alog box. 6. USIN G THE TERMINAL PROPER TIES 31 ...
-
Eizo 630LT-GR-N - page 32
Settings and adjustments of “T erminal Pr oper ties” T ab name Contents Remarks Refer to Product information, T erminal Nam e Displa y the Product informatio n General Reset Reset the term inal to f actor y-default settings p .33 Remote computer sound Sound output after WTS conn ection Local Resources *1 Local de vices Local de vices reference ...
-
Eizo 630LT-GR-N - page 33
6-1. General Pr oduct Information [General] tab shows the p roduct name, Product ID, W indows CE Revision, ver sion, and T erminal name. Resetting to Default (1) Select the [Reset the terminal to fa ctory-default property settings] check box. (2) The “System Settings Change” dialog box is displayed, click [Y es]. (3) “T erminal Properties” ...
-
Eizo 630LT-GR-N - page 34
6-2. Local Resour ces (RDP pr otocol only) Sound settings [Remote computer soun d] ... Sound settings after WTS connection (Remote computer means WTS). Device settings [Local devices] .................... Select the applicable device check box when using the device connected from the WTS after W TS connection. NO TE • Sound settings and [Disk d r ...
-
Eizo 630LT-GR-N - page 35
6-3. Displa y Resolutions / Desktop Colors [Desktop Area and Refresh Frequency] ................................... Set the resolution/refresh rate. (630LT-GR/630LT- GR-N supports 1024 x 768 @60 Hz only). [Colors]............................... S e t the desktop color (256 Colors / High color) of the following. - Windows CE desktop (before WTS conn ...
-
Eizo 630LT-GR-N - page 36
P ower sa ve [Screen Saver] ...................... Set the screen saver and power save settings. S elect the check box, and set an idle period into the [Wait] box. NO TE • P ower sa ving system After the Screen Sa ver idle pe r iod passed, eClient shift to the pow er sav e mode. The power con sumption is lower than 7 W in the pow er sav e mode. ? ...
-
Eizo 630LT-GR-N - page 37
6-4. Experience (RDP pr otocol only) Connection speed Specify your connection speed to WT S connection. Choose your connection speed from the pull-down menu or select the setting check box. NO TE • This setting can be a vailab le only when connecting with WTS, which v ersion is 5.1 or later . 6. USIN G THE TERMINAL PROPER TIES 37 ...
-
Eizo 630LT-GR-N - page 38
6-5. Contr ol P anel Dialing [Location name] .................. Choose the sender’ s location (click [New] to add a new sender’s location). [Local Settings are:]............. Setup the local settings. 38 6. USING THE TERMINAL PROPER TIES ...
-
Eizo 630LT-GR-N - page 39
Ke yboard [Input Locale] ..................... Selects a keyboard language. [NumLock Key] .................. Enables/cancels NumLock function on start-up. [Check Input Devices] ......... Enables/cancel s checking the connection state of a keyboard and a mouse on start-up. Whe n a keyboard and/or mouse are not connected on s tart-up, the error messa ...
-
Eizo 630LT-GR-N - page 40
Mouse [Buttons] ............................. Assigns th e primary mouse button and the secondary mouse button. [Motion] ............................. Adjust s the speed at which the pointer moves on your screen and how fast the mo use pointer accelerates as you move the mouse. T ouch P anel Properties [Tap Settings] ...................... Set the ...
-
Eizo 630LT-GR-N - page 41
NO TE • Changing the Doub le-clic k speed, and Doubl e-click width and hei ght When y ou hav e difficulty with doub le-clicking on the touch panel with a stylu s (or a finger tip): [Double-click speed] 1) Cli ck Window’ s [Star t] and select [Settings] - [Control P anel]. 2) Dou ble-clic k [Mouse] and adjust the speed at [Doub le-click spee d]. ...
-
Eizo 630LT-GR-N - page 42
Date / Time NO TE • Date and time will return to the default settings if the po wer cord is unplugged. [Date/Time] ........................ Set date, current time, or time zone. [NTP Server] ....................... Sy nchronize time with the NTP Server. Select when to synchronize time with the NTP server (on every boot up or every time clicking t ...
-
Eizo 630LT-GR-N - page 43
Cer tificates Lists the certificates stored in the 630L T -GR/630L T -GR-N. A certificate can be registered, if an external disk is connected to this product, a certificate file ca n be imported. NO TE • When using the Secure Gate wa y , select its cer tificate and click [Add]. By clicki ng the button, the certificate can be used. (The cer tifica ...
-
Eizo 630LT-GR-N - page 44
Add-on Add-on lists all application so ftware installed in eClient. T o remove software, select it and click [Remove]. NO TE • Neither Microsoft T erminal Ser ver Client nor Citrix ICA Client Software is remov ed. Internet Options [General] ............................. Set up the browser. [Connection] ....................... Se tup the connectio ...
-
Eizo 630LT-GR-N - page 45
Printers NO TE • The eClient 630L T -GR/6 30L T -GR-N suppor ts an LPTx por t and a COM1 por t. • Use a RDP protocol to set the printer’ s adjustment. • If you are using the IC A protocol, please ref er to the instr uction manual of the Citr ix MetaF rame . Adding another printer settings Select [Add Printer] icon, and click [Open]. “Prin ...
-
Eizo 630LT-GR-N - page 46
Network and Dial-up Connections Set up connection informati on according to the connection method to WTS/W eb server (See page 15 for the details). 46 6. USING THE TERMINAL PROPER TIES ...
-
Eizo 630LT-GR-N - page 47
6-6. ICA Settings (ICA Pr otocol only) NO TE • The settings will aff ect all the settings with ICA protocol. IC A Client inf ormation [ICA Client Software] ......... Version of the Citrix ICA Client IC A Client Configurations [ICA Client Configurations] ................................... You ca n set the configuration for the ICA Connection. IC ...
-
Eizo 630LT-GR-N - page 48
6-7. Ser ver FTP Service NO TE • Bef ore setting the FTP service, specify the [P assw ord] in the [Control P anel] tab surely . [FTP Service] ....................... If using this eC lient as a FTP server, select the FTP Server ON/OFF check box and set the us er name, which is used for accessing the product from the o ther eClient, in the user li ...
-
Eizo 630LT-GR-N - page 49
6-8. Security Security Settings [Terminal Security Enable] ................................... This ena bles se ttings on network information of the WTS invisible to prevent from unde sirable change. • Security items Dialog bo x Ta b T er minal Connection Manager [Configure] T er minal Proper ties “T er minal Name” and “Reset” in the [Gen ...
-
Eizo 630LT-GR-N - page 50
[Single Button Connect Enable] ................................... (Select the [Terminal Security Enable] check box to enable this check box.) The procedure to connect to the WTS c an be restricted. When this check box is selected, the “Single Button Connect” dialog box is displayed when th e eClient 630LT-GR/630LT-GR-N starts up. Clicking [Con ...
-
Eizo 630LT-GR-N - page 51
6-9. System Pr oduct Information [Software] ........................... Mi crosoft Windows CE Version, Revision Window Terminal Server Client Revision (Please refer to the page 52 on [Updat e...].) [Hardware] ......................... Serial Nu mber of the unit [Network] ......................... Network in formation 6. USIN G THE TERMINAL PROPER T ...
-
Eizo 630LT-GR-N - page 52
7. SOFTW ARE UPD A TING/INST ALLA TION Y ou can update the built-in/add-on softwa re and install new add-on software. Updating/Installation is performe d in the “T erminal Properties“. (Built-in Software) OS: Microsoft Windows CE.NET / BSQUARE’ s JEM-CE TM Java Solutions Applications: Microsoft T erminal S erver C lient (Microsoft RDP Client) ...
-
Eizo 630LT-GR-N - page 53
2. “Software Update” dial og box is displayed. [Server:] ............................. Ty pe IP address or full domain name of the FTP Server. [User Name:]/[Password:] ... Type the user name and password to connect the FTP. [File Name:] ........................ Type the folder and copied file name located in the FTP Server. [Example] Type the f ...
-
Eizo 630LT-GR-N - page 54
3. Preventing from update failure, ch eck if the settings are correct and the network environment is suitab le. Click [Network T est]. If the settings are correct, the fo llowing message is displayed. Click [OK]. 4. Click [Download]. • In case of updating the b uilt-in software The following message is displayed when you successfully download the ...
-
Eizo 630LT-GR-N - page 55
Using the 630L T -GR/630L T -GR-N as a FTP server The firmware file can be updated by the 630 L T -GR/630L T -GR-N set as a FTP server when two or more 630L T -GR/630L T -GR-N exists on the same network NO TE • This updating is a vailab le f or OS file (NK.bin) only . FTP Server Update Update 630L T -GR/63 0L T -GR-N ( FTP Server ) 1. Update a 63 ...
-
Eizo 630LT-GR-N - page 56
8. PRA CTICAL SETUP 8-1. 630L T -GR/630L T -GR-N settings By utilizing the DHCP Option function of the DHCP Server , necessary information are supplied by the DHCP Server , and each setting is automatically set every time the 630L T -GR/630L T -GR-N is turne d on. The following information can be obtained by the eClient 630L T -GR/630L T -GR-N. • ...
-
Eizo 630LT-GR-N - page 57
NO TE • Making a Registry File to Connect to a WTS/W eb Ser ver . • Please ref er to the e xample below , mak e a registr y file, and sa ve it in Unicode f or mat. Please change the italic bold phrases as n ecessar y . - ConnectionName: T ype the connection name in the “T er minal Connection Manager”. - T erminalServerAddress: T ype the IP ...
-
Eizo 630LT-GR-N - page 58
(for W eb Connect ion) [HKEY_LOCAL_MACHINESOFTWAREMicrosoftWBT] "SetupWizardEnabled"=dword:0 ...................... Specifies whether starting up “eClient Setup Wizard” or not. (0; not starting up, 1; starting up) [HKEY_LOCAL_MACHINESOFTWAREMicrosoftWBTClients RegistrationWebConnectionsWeb1] "StartCmdLineArgs"=&qu ...
-
Eizo 630LT-GR-N - page 59
eClient 630L T -GR/630L T -GR-N Settings Please confirm the following settings in the [C ontrol Panel] tab of [T erminal Properties]. [Network and Dial-up Connections] tab - In case of the connection to the WTS/Web server through built-in LAN • IP addre ss setting selecting of [Obtain an IP address via DHCP] - In case of the connection with a LAN ...
-
Eizo 630LT-GR-N - page 60
8-2. Shor t cut command b y keyboar d Function Short cut command Brightnes s Increase [Alt] key and [+] k ey Decrease [Alt] ke y and [-] key Displa y “T erminal Connection Manage r” dialog bo x (after WTS / Web conne ction) Press [Ctrl] + [Alt] + [End] Displa y “T erminal Proper ties” dialog bo x Press [F2] in the “T erminal Connection Ma ...
-
Eizo 630LT-GR-N - page 61
9. TR OUBLESHOO TING This page presents problem that can be correct ed by the user . If a problem persists even after applying the suggested reme dies, contact an EIZO dealer . Prob lems P oints to check with pos sible solutions 1. No picture is displayed on the screen. Check if the power is OFF . Check brightness setting. Minimum settings ...
-
Eizo 630LT-GR-N - page 62
Prob lems P oints to check with pos sible solutions 5. The screen has defective pixels (e.g. slightly light or dark). This is due to the characteristics of the panel itself, and not the failure. 6. Fing er prints appear on the screen. Leaving the white screen on may solve the problem. 62 9. TROUBLE SHOO TING ...
-
Eizo 630LT-GR-N - page 63
10. CLEANING Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime. NO TE • Ne ver use thinne r , benzene , alcohol (ethanol, methanol, or isoprop yl alcohol), abrasiv e cleaners , or other strong solve nts, as these ma y cause damage to the cabinet or LCD panel. Cabinet T o remove stains, wipe the ...
-
Eizo 630LT-GR-N - page 64
Mouse If you find that the pointer on the screen doesn’ t move smoothly , your mouse needs to be cleaned. Periodically clean the mouse for your operation. (1) T urn off the 630L. (2) T urn the mouse upside down and remove the mouse tr ackball cover . Press the cover towards “Open” while pulling the other side of the cover . Press (3) Remove t ...
-
Eizo 630LT-GR-N - page 65
1 1 . SPECIFICA TIONS CPU National Semiconductor Geod e GX1, 300 MHz Memor y RAM: 64 MB, ROM: 32 MB LAN 10 BASE-T/100BASE-TX, W ake On LAN suppor ted Processing Unit Speakers Output Le vel: 1 W + 1 W , stereo LCD P anel 38 cm (15 inch) TFT color LCD panel Anti-Glare Hard Coating (Viewing Angle: Horizontal: 160°, V er tical: 150°) Dot Pitch 0.297 ...
-
Eizo 630LT-GR-N - page 66
Cer tifications and Stand ards 100-120 V A C range TÜV/NR TL, c-TÜV , FCC class A, CB, TÜV Rheinland Ergonomics Approv ed, EP A ENERGY ST AR ® program, TCO’99 *2 200-240 V AC range CE, CB, TÜV Rheinland/GS, TÜV Rheinla nd/Ergonomic Approv ed, EP A ENERGY ST AR ® program, TCO’99 *2 *1 Monaural microphone connector is not availab le now . ...
-
Eizo 630LT-GR-N - page 67
12. REFERENCE 12-1. A ttaching an Arm Stand The eClient 630L T -GR/630L T -GR-N can be used with an arm stan d by removing the tilt stand and attaching the arm stand to the terminal. NO TE • Use an arm stand that satisfies the follo w ing. - When using the eClient 630L T -GR/630L T -GR-N with an ar m stand, the arm stand must be VESA approved: - ...
-
Eizo 630LT-GR-N - page 68
INDEX A ADDING & CHANGING A CONNETION NAME ......................... 21 Add-on .................................................... 44 Administration Console ........................... 50 Attaching an Arm Stand .......................... 66 Automatic Lo gon............................... 22, 23 Autostart Co nnection ........................... ...
Avez-vous une question à propos de Eizo 630LT-GR-N?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec Eizo 630LT-GR-N, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Eizo 630LT-GR-N il est probable qu’il a envie de partager la façon de le résoudre.