Français dropdown-ico

Manuel d’utilisation Alvarez SA 1532z

21 pages 1.35 mb
Télécharger

Aller à la page of 21

Summary
  • Alvarez SA 1532z - page 1

    1 SA1532z REPAIR MANUAL ...

  • Alvarez SA 1532z - page 2

    2 These instructions are intended to help restore any ailing SA1532z Active Loudspeaker back to factory working conditions. They show how to remove and replace the drivers and the ampli fi er assembly. Please contact Mackie Tech Support (1-800-898-3211) to receive a Service Request Number and Order Number for parts needed for this restoration. The ...

  • Alvarez SA 1532z - page 3

    3 Led PCB replacement: 3 Carefully begin to remove the grill. Do not fully remove the grill as the cable is still fi rmly attached to the led PCB assembly. A fl at head screwdriver may aid in loosening the grill from the cabinet. 2 Keep the ten screws in a safe place. 4 Carefully remove the cable attached to the led PCB assembly. 1 Five screws ne ...

  • Alvarez SA 1532z - page 4

    4 6 Carefully remove the led PCB assembly from the back side of the grill. Led PCB replacement continued: 7 The hard part is done, the rest is easy! Place the new led PCB assembly (part #0007334) where the old one was. Follow the same steps as above, but backwards 6 to 1. Power up the SA1532z and the led should light up. Congratulations, you just r ...

  • Alvarez SA 1532z - page 5

    5 Bottom woofer replacement: 1 Follow steps 1-4 of the led PCB replacement instructions, as the grill will need to be removed in order to access the bottom woofer. 2 Eight screws and washers need to be removed from the woofer using the phillips head screwdriver. 3 Keep the eight screws and fl at washers in a safe place. Note: There are two differe ...

  • Alvarez SA 1532z - page 6

    6 Bottom woofer replacement continued: 6 The picture on the right shows what the SA1532z looks like with the grill and bottom woofer removed . Place the new woofer (part #0013917) where the old one was. Follow the same steps as above, but backwards 5 to 1, making sure to keep the led PCB assembly cable in front of the woofer. Power up the SA1532z a ...

  • Alvarez SA 1532z - page 7

    7 Top woofer replacement: 1 Follow steps 1-4 of the led PCB replacement instructions, as the grill will need to be removed in order to access the top woofer. 2 Two woofer screws are hidden by the grill support (outlined on the left). The woofer can not be removed until the support is. See the following pictures and further instructions. 1 2 3 4 5 6 ...

  • Alvarez SA 1532z - page 8

    8 Top woofer replacement continued: 4 Keep the eight screws and fl at washers in a safe place. 5 Carefully begin to remove the woofer. A fl at head screwdriver may aid in loosening the woofer by prying between the woofer and cabinet. Hold the woofer in place with one hand while prying around the edge with your free hand. Caution: The woofer is ap ...

  • Alvarez SA 1532z - page 9

    9 7 The picture on the left shows what it looks like with the grill and top woofer removed . Place the new woofer (part #0013917) where the old one was. Follow the same steps as above, but backwards 6 to 1. Power up the SA1532z and the new woofer should now be pumping out glorious lows. Awesome, you just replaced a 15” woofer! Top woofer replacem ...

  • Alvarez SA 1532z - page 10

    10 High Frequency Driver replacement: 1 Follow steps 1-4 of the led PCB replacement instructions, as the grill will need to be removed in order to access the high frequency driver. 2 Fourteen screws and washers need to be removed from the horn assembly using the phillips head screwdriver. 3 Keep the fourteen screws and fl at washers in a safe plac ...

  • Alvarez SA 1532z - page 11

    11 High Frequency Driver replacement continued: 5 The positive (solid blue) and negative (blue and black) cables are still attached to the high frequency driver terminals. Remove the cables from their terminals simply by pushing down on the terminal and pulling out the cable. 4 Carefully begin to remove the entire horn assembly (with the high and m ...

  • Alvarez SA 1532z - page 12

    12 High Frequency Driver replacement continued: 7 This is what it looks like with the grill and horn removed. See right side for further instructions and additional pictures on how to remove and replace the high frequency driver. 8 Four screws and locking washers may be removed from the high frequency driver using the phillips head screwdriver. Not ...

  • Alvarez SA 1532z - page 13

    13 9 Keep the four screws and locking washers in a safe place. High Frequency Driver replacement continued: 11 Turning the high frequency driver over reveals the cover plate which needs to be removed using the phillips head screwdriver. Keep the four screws in a safe place. Replace with the new driver (part #0013925) and follow the same steps as ab ...

  • Alvarez SA 1532z - page 14

    14 3 A closeup of the high frequency driver is shown above. Four screws need to be removed from the driver using the 3mm allen wrench. 4 Keep the four screws in a safe place. 5 The diaphragm and plate adapter are easily removed from the horn assembly. They may not be broken down any further. Place the new diaphragm (part # coming soon) and plate as ...

  • Alvarez SA 1532z - page 15

    15 Mid Frequency Driver replacement: 1 Follow steps 1-6 of the high frequency driver replacement instructions, as the grill and horn assembly will need to be removed in order to access the mid frequency driver. 2 Eight screws and locking washers may be removed from the mid frequency driver cover plate using the phillips head screwdriver. 3 Keep the ...

  • Alvarez SA 1532z - page 16

    16 4 The mid frequency driver cover plate should easily lift right off of the horn. Holding down the horn assembly with one hand while lifting up on the cover plate with the other hand may help. The positive (solid green) and negative (green and black) cables are still attached to the mid frequency driver cover plate terminals. Remove the cables fr ...

  • Alvarez SA 1532z - page 17

    17 6 Keep the four screws and locking washers in a safe place. 7 The mid frequency driver easily lifts right off of the horn. Replace with the new driver (part #0013897) and follow the same steps as above, but backwards 7 to 1. Power up the SA1532z and the new driver should now be pumping out those mids again. Right on, you just replaced a mid freq ...

  • Alvarez SA 1532z - page 18

    18 Ampli fi er Assembly replacement: 1 Eighteen screws need to be removed from the ampli fi er assembly using the phillips head screwdriver. The ampli fi er assembly is capped by two cover plates outlined above. 3 The covers may be worked loose by wedging a fl at head screwdriver in between the cabinet and the cover, as well as the ampli fi er ...

  • Alvarez SA 1532z - page 19

    19 Ampli fi er assembly replacement continued: 4 Once the two cover plates are removed, two more screws need to be taken out in order to separate the ampli fi er assembly from the cabinet. Keep the two screws in a safe place. 5 The ampli fi er assembly is now ready to be separated from the cabinet. Do not completely take the ampli fi er assembl ...

  • Alvarez SA 1532z - page 20

    20 Ampli fi er assembly replacement continued: 6 Closeups of the led PCB cable and connector are shown above. The black wire of the cable is closest to the ribbon cable. The cable only fi ts in one way. 1 1 7 Now for the closeups of the woofer and driver terminals. Make sure the cables are reconnected to the same terminals they were removed from ...

  • Alvarez SA 1532z - page 21

    21 8 Place the new ampli fi er assembly (part #0013841-00) where the old one was. Follow the same steps as above, but backwards 7 to 1. Remove the serial number from the faulty ampli fi er assembly (as shown in picture above) and place on the new ampli fi er assembly. Power up the SA1532z and relish in the fact that you just replaced an ampli ? ...

Fabricant Alvarez Catégorie Car Speaker

Les documents que nous recevons du fabricant de l'appareilAlvarez SA 1532z peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Alvarez
- manuels d’utilisations SA 1532z
- fiches produit Alvarez
- dépliants
- ou étiquettes-énergie Alvarez SA 1532z
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Alvarez SA 1532z.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Alvarez SA 1532z, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Alvarez SA 1532z. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Alvarez SA 1532z.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Alvarez SA 1532z, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Alvarez SA 1532z par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Alvarez SA 1532z.

Le manuel d’utilisation complet Alvarez, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Alvarez SA 1532z - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Alvarez SA 1532z, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lAlvarez SA 1532z qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Alvarez SA 1532z - qui devraient nous aider dans les premières étapes lors de l'utilisation Alvarez SA 1532z
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Alvarez SA 1532z
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Alvarez SA 1532z dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Alvarez SA 1532z?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Alvarez SA 1532z, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Alvarez SA 1532z il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)