Français dropdown-ico

Manuel d’utilisation Teac K1200

31 pages 0.94 mb
Télécharger

Aller à la page of 31

Summary
  • Teac K1200 - page 1

    Owner’ s Manual, ComSystem K1200 L T BMW of North America, LLC W oodcliff Lake, New Jersey 07677-7731 © 2001 BMW of North America, LLC Logo and trademark are registered Printed in U.S.A. 06/01 PN 99 99 0 000 210 ...

  • Teac K1200 - page 2

    1 W elcome to BMW The BMW ComSystem has been developed to provide riders of BMW K 1200 L T models the most advanced sound and communications management system. The ComSystem acts as the foundation, allowing owners to utilize privately purchased portable modular electronic devices suited for the local market such as cell phones, two- way radios and ...

  • Teac K1200 - page 3

    2 In the interest of your personal safety , please read this operating manual and particularly the safety notes carefully and in full. Safety Notes The following symbols are used in this operating manual for safety notes: Danger indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury Warning indicat ...

  • Teac K1200 - page 4

    3 Check the volume control position of your ComSystem prior to use. If in doubt about the correct setting, turn the volume control counter -clockwise to a minimal level prior to turning on ignition to avoid excessively loud volume when the motorcycle ignition is turned on. Set your ComSystem to a volume level which allows you at all times to hear t ...

  • Teac K1200 - page 5

    4 Never dial the telephone while riding, unless you have a voice- controlled dialing phone service and the driving situation permits. Note: Only press the transmit button when you really want to transmit via two- way radio. All conversations and telephone calls that are conducted with the transmit button pressed can be received and overheard by thi ...

  • Teac K1200 - page 6

    5 Overview The audio management of the K 1200 L T consists of inputs and outputs from numer ous standard and optional devices. T o gain the most benefit from the system, it is necessary to understand what functions are available. As with all audio systems, these devices operate on different levels, which determine what priority each level has over ...

  • Teac K1200 - page 7

    6 1. Auxiliary Audio Input 2. Fairing Speaker / Headset Switch 3. Inter com Volume 4. FRS Radio Input 5. Intercom VOX Sensitivity 6. Cell Phone Input 7. FRS or CB T ransmit Select Switch Motorcycle Connections / Controls 8. Rider T ransmit (PTT) Push-T o-T alk Button for FRS or CB radio 9. Connection for Rider Headset Cord 10. Passenger T ransmit ( ...

  • Teac K1200 - page 8

    7 Rider / Passenger Intercom Operation The ComSystem intercom is a voice activated system that allows seamless communication between rider and passenger . The ComSystem is operational when the motorcycle ignition switch is turned “on”. The system will not function (nor can you hear music through the helmet headsets) with the ignition “off” ...

  • Teac K1200 - page 9

    8 • The intercom will mute the music from all audio sources when VOX is engaged, and return the music 3.5 seconds after the last VOX input is received. The 3.5 second delay spans the natural gaps that occur from voice inflections and minor turns of the head (away from microphone) that occur while riding. • The optional rider / passenger PTT swi ...

  • Teac K1200 - page 10

    9 Auxiliary Audio Input The ComSystem provides a port to connect auxiliary audio players (such as MP3 devices) to the audio channel (Level 1). Requirements • Connect the accessory audio device using a connection cable BMW PN 99 99 0 000 204 (short) or 99 99 0 000 205 (long), which has a 3.5 mm stereo plug at both ends. Function • The auxiliary ...

  • Teac K1200 - page 11

    10 Cellular T elephone The ComSystem provides an input for cellular phone communication. Given the increased emphasis / local legislation requiring the use of cellular phone headsets while driving a car , as well as the proliferation of phone models and calling plans available, BMW is providing a simple connection to the ComSystem via the cellular ...

  • Teac K1200 - page 12

    11 oddments compartment. A longer cable is available PN 99 99 0 000 203 to allow placement of the phone in the optional tank utility pouch 71 60 2 342 670. • T urn the phone “on”, place the phone in the tray and close the lid. • For cellular phones equipped with voice-command dialing, your helmet headset microphone is continually connected ...

  • Teac K1200 - page 13

    12 Operation of (FRS) Family Channel Radio Requirement • A FRS radio such as the Kenwood FreeT alk™ (BMW PN 99 99 0 000 041) and corresponding adapter cable (BMW PN 99 99 0 000 199) are required. Several different adapter cables have been developed for the most popular FRS radios (see page 23). Please consult your BMW retailer for options prior ...

  • Teac K1200 - page 14

    13 • Incoming FRS radio transmissions will activate the intercom system, mute the music (Level 1), and will be heard by rider and passenger . Rider and passenger can discuss what is being heard from the FRS or CB radio without that conversation be transmitted. If CB is also being monitored, incoming transmissions will mix with the FRS radio broad ...

  • Teac K1200 - page 15

    14 particularly true of CB, which is AM band (FRS is FM). Therefore, expect less range in mountain areas, greater range in plains areas. Note: For maximum enjoyment of the system, it is imperative that the helmet headset microphone placement be correct, as advised in the headset installation instructions. T oo much gap between the mouth and microph ...

  • Teac K1200 - page 16

    15 Operation of (CB) Citizen Band Radio Requirement • A CB radio such as the Midland™ 75-830 CB radio kit (BMW PN 99 99 0 000 196) available from your BMW retailer . • We recommend that the CB radio kit be installed by your BMW retailer . • The BMW CB antenna kit BMW PN 99 00 0 001 050 / 051 mast and base is required. • A push-to-talk but ...

  • Teac K1200 - page 17

    16 desired channel. Y ou can select memory functions to remember specific channels. • With intercom volume set at your normal level, adjust the volume of the CB radio to be received at a comfortable level. Use the CB radio volume control to do this (you need to receive a real transmission to do this) before the ride begins. Also adjust the CB squ ...

  • Teac K1200 - page 18

    17 Note: If you receive a cell phone call while riding with the FRS or CB radio in use, the cell phone will mute all Level 1 & 2 communications. How- ever , if (out of habit) you press the PTT button while talking on the phone (something you should not do), that portion of your phone conversation could be transmitted over the FRS or CB radio. N ...

  • Teac K1200 - page 19

    18 Accessory Audio W ar ning Device or GPS BMW has provided a special connection plug in the wiring harness of the ComSystem for connection of an Accessory Audio Warning Device (AAWD) and GPS. Requirements • A GPS system with audio output signal and / or AAWD with audio output signal. • See your BMW retailer for details on the BMW Ridefinder GP ...

  • Teac K1200 - page 20

    19 volume control to do this (you need to receive a real transmission to do this) before the ride begins. • AAWD or GPS volume level must be set high enough to trigger the audio circuit. V ery low volume levels may produce a “choppy” audio response. • A special plug kit with universal pigtail is available from your BMW retailer under BMW PN ...

  • Teac K1200 - page 21

    20 Communication Options BMW has developed a wide range of communications options to assist riders with their communications needs. Please review the following items to learn more about BMW communications. BMW Helmet Headsets BMW helmet headsets are fitted with high-performance helmet speakers with independent floating ground connections, providing ...

  • Teac K1200 - page 22

    21 1983 - 2001 Kawasaki audio BMW PN 99 99 0 000 030 1986 - 1989 Suzuki audio BMW PN 99 99 0 000 030 1988 - 2000 Honda GL1500 w/J & M passenger control panel BMW PN 99 99 0 000 030 BMW FreeT alk™ Headset Harness BMW has produced a special harness that connects the BMW helmet headset directly to the Kenwood FreeT alk™ FRS radio. This enables ...

  • Teac K1200 - page 23

    22 BMW ComSystem Parts Listing Main Kits 99 99 0 000 186 ComSystem - Kit Complete (includes main control unit and complete wiring harness) 99 99 0 000 187 ComSystem - Kit Complete for Retrofit of BC1 & BC2 99 00 0 001 788 Power Accessory Relay Harness (needed for either kit above) Replacement Parts 99 99 0 000 188 ComSystem - Main Control Unit ...

  • Teac K1200 - page 24

    23 99 99 0 000 199 ComSystem - Kenwood FreeT alk™ FRS Adapter Harness 99 99 0 000 200 ComSystem - Motorola T alk-About™ FRS Adapter Harness 99 99 0 000 201 ComSystem - Motorola T alk-About™ (T -Series) FRS Adapter Harness 99 99 0 000 202 ComSystem - Cell Phone Adapter Harness - standard length 7” 99 99 0 000 203 ComSystem - Cell Phone Adapt ...

  • Teac K1200 - page 25

    24 T echnical Data Current Draw System / ignition off Zero System on / standby 100 mA (no audio, no transmission, external music switch off) Maximum (with CB transmission) 1.5 A Operating V oltage V ehicle power (negative 10.5 V too 16 V ground, with reverse battery protection) Audio Input Stereo (Compatible with bridge circuits) Maximum level in + ...

  • Teac K1200 - page 26

    25 Frequency Impedence Sensitivity Maximum Input from FRS Radio 1 kHz 100 Ω -35 dbm +10 dbm Input from CB Radio 1 kHz 100 Ω -25 dbm +10 dbm Input from Cell T elephone 1 kHz 1 k Ω -40 dbm -10 dbm Input from GPS / Audio 1 kHz 2 k Ω -15 dbm +0 dbm Warning Device Output Audio 1 kHz 32 Ω N / A 500 ww Output to FRS Radio 1 kHz <30 k Ω -55 ...

  • Teac K1200 - page 27

    26 Part # 99 99 0 000 191 Replacement Wiring Harness 2 - Rear Part # 99 99 0 000 190 Replacement Wiring Harness 1 - Main ...

  • Teac K1200 - page 28

    27 Part # 99 99 0 000 192 Replacement Wiring Harness 3 - Front Part # 99 99 0 000 199 Kenwood FreeT alk Adapter Harness ...

  • Teac K1200 - page 29

    28 Part # 99 99 0 000 200 Motorola T alk-About Adapter Har ness Part # 99 99 0 000 201 Motorola T alk-About (T Series) Adapter Harness ...

  • Teac K1200 - page 30

    29 Part # 99 99 0 000 196 ComSystem CB Wire Diagram ...

  • Teac K1200 - page 31

    Owner’ s Manual, ComSystem K1200 L T BMW of North America, LLC W oodcliff Lake, New Jersey 07677-7731 © 2001 BMW of North America, LLC Logo and trademark are registered Printed in U.S.A. 06/01 PN 99 99 0 000 210 ...

Fabricant Teac Catégorie Bicycle

Les documents que nous recevons du fabricant de l'appareilTeac K1200 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Teac
- manuels d’utilisations K1200
- fiches produit Teac
- dépliants
- ou étiquettes-énergie Teac K1200
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Teac K1200.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Teac K1200, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Teac K1200. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Teac K1200.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Teac K1200, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Teac K1200 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Teac K1200.

Le manuel d’utilisation complet Teac, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Teac K1200 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Teac K1200, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lTeac K1200 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Teac K1200 - qui devraient nous aider dans les premières étapes lors de l'utilisation Teac K1200
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Teac K1200
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Teac K1200 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Teac K1200?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Teac K1200, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Teac K1200 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)