Français dropdown-ico

Manuel d’utilisation Graco 8403

36 pages 0.32 mb
Télécharger

Aller à la page of 36

Summary
  • Graco 8403 - page 1

    Any Questions? 1- Infant Car Bed Child Restraint System OWNER'S MANUAL Model 8403 Y our childs safety depends on you installing and using this car bed correctly . READ THIS MANUAL! Return this manual to the storage pocket provided on the underside of the car bed for quick reference. © 1999 Graco 403-9-99 IS1904 ...

  • Graco 8403 - page 2

    1. Important Safety Information 1.1 About Y our Child 1.2 About Using this Car Bed in Y our V ehicle 1.3 A bout Airbags 1.4 When the Car Bed is Not Occupied 1.5 About the Life and Condition of this Car Bed 1.6 When the Car Bed is Not in the V ehicle 2. Choosing a Suitable Location for the Car Bed 2.1 Some Basic Requirements 2.2 Be Sure Y our V ehic ...

  • Graco 8403 - page 3

    6. Cleaning and Maintenance 7. Registering Y our Car Bed Contacting Graco Our goal is to make every product the best it can be! W e are also committed to supporting our products after purchase. If you would like to speak to Graco about your product, please call our Customer Service Department at 1-888-224-6549 or visit our Internet website, www .gr ...

  • Graco 8403 - page 4

    1. Important Safety Information No child restraint can guarantee protection from injury . However , proper use of this car bed reduces the risk of serious injury or death to your child in the event of a sharp turn, sudden stop or crash. Do not install or use this car bed until you read and understand the instructions in this manual and in your vehi ...

  • Graco 8403 - page 5

    1.2 About Using this Car Bed in Y our V ehicle ! Y our child can be injured in a vehicle even if you are not in a crash. More common events such as sudden braking and sharp turns can injure your child if the car bed is not properly installed or if your child is not properly secured in the car bed. ! Do not place apnea monitors, oxygen tanks, or oth ...

  • Graco 8403 - page 6

    1.3 About Airbags ! W ith some child restraint systems, such as rear-facing infant seats, an inflating airbag can strike the child restraint and kill or seriously injure a child. W ith regard to this car bed and airbags, our tests and investigations indicate that an inflating airbag will not strike a properly installed car bed and result in serious ...

  • Graco 8403 - page 7

    1.4 When the Car Bed is Not Occupied ! The surface of the car bed can become very hot if the car bed is left in the sun. Contact with these parts can burn your childs skin. Cover the car bed with a blanket if it will be exposed to the sun, and always check the surface of the car bed before putting your child in it. ! Never leave a car bed unsecu ...

  • Graco 8403 - page 8

    ! Never use the car bed if it has damaged or missing parts. Do not use a cut, frayed or damaged car bed harness. Y ou can order a new harness by calling 1-888-224-6549 . 1.6 When the Car Bed is Not in the V ehicle T o avoid injury or death from suffocation, falls and other hazards: ! Always secure child in harness straps whenever child is in the ca ...

  • Graco 8403 - page 9

    2 . Choosing a Suitable Location for the Car Bed 2.1 Some Basic Requirements T o reduce the risk of head and neck injuries in the event of a crash, your childs head must be positioned as close to the center of the car as possible, and never next to a door or the side of the vehicle. Some seating positions in your vehicle are not safe locations f ...

  • Graco 8403 - page 10

    ! Never place the car bed on the drivers side of a vehicle (seats A and B ) Ê . Only the center and passenger side seating positions ( C , D , E , F and G ) are potential locations for this car bed if all other requirements are met. ! The car bed must be positioned so that the childs head is near the center of the vehicle. This means that wh ...

  • Graco 8403 - page 11

    2.2 Be Sure Y our V ehicle Seat Meets All of These Requirements ! THE VEHICLE SEA T MUST F ACE FOR W ARD. Do not place car bed in a rear-facing vehicle seat Ì or a side-facing vehicle seat Í . ! Only use this car bed on vehicle seats with seat backs that lock in an upright position. Do not use seats that can fold down without having to release a ...

  • Graco 8403 - page 12

    2.3 Consider Accident Statistics and Information about Airbags ! According to accident statistics, children are safer when properly restrained in rear vehicle seating positions, rather than in front seating positions. ! Before placing the car bed in a seating location with an airbag, read section 1.3 on page 6. 12 ...

  • Graco 8403 - page 13

    2.4 Be Sure Y our V ehicle Seat Belt is Safe to Use A. Seat Belt Systems that are NOT Safe for Use with the Car Bed DO NOT use the following types of vehicle belt systems with your car bed. They will not hold the car bed securely in place. The metal locking clip provided with this product will NOT make any of these seat belts safe. Many seat belt s ...

  • Graco 8403 - page 14

    ! DO NOT use a lap belt that stays loose and can move until it locks in a crash or sudden stop. This belt has an Emergency Locking Retractor , E.L.R. It is often seen in combination with a motorized shoulder belt. Since these lap belts will loosen if pulled on slowly , the car bed may shift to an unsafe position. This seat belt will NOT safely rest ...

  • Graco 8403 - page 15

    ! DO NOT use a seat belt that is attached to the door in any way . This type of belt is designed to open with the door and automatically surround the passenger when the door is closed. This seat belt will NOT safely restrain the car bed Ì . ! DO NOT use a seat belt that is anchored forward of the seat crease. This seat belt will NOT safely restrai ...

  • Graco 8403 - page 16

    B. Seat Belt Systems that are Suitable for Use with the Car Bed The following vehicle belt systems can be used with your car bed, if the seat location meets all other requirements of these instructions and the requirements in your vehicle owners manual. ! Lap belt that is manually adjusted and stays tight. This type of seat belt is tightened by ...

  • Graco 8403 - page 17

    ! Lap/shoulder combination belt with a lock- ing latchplate. Once it is buckled, this type of belt has a latchplate that will not allow the lap portion of the belt to loosen. This seat belt does not require a locking clip Ì . ! Lap/shoulder combination belt with a latch- plate that can slide freely along the belt. This type of belt MUST be convert ...

  • Graco 8403 - page 18

    3. Featur es and Components of the Car Bed Harness slots Harness crotch strap Pad Harness shoulder straps Rear of car bed (low side) V ehicle belt guides Front of car bed (high side) The locking clip is stored at the rear of the car bed. Y ou will need to use it with certain types of vehicle seat belts. Locking Clip 18 ...

  • Graco 8403 - page 19

    4. Positioning and Securing Y our Child in the Car Bed Premature and/or low birth weight infants have special medical needs that will influence how your child should lay in the car bed. This car bed is designed so babies can lay on their backs or on their sides. Under certain circumstances, it may be preferable to have babies lie on their stomachs. ...

  • Graco 8403 - page 20

    1. Make sure that your child is dressed in appropriate clothing which: a. Allows the crotch strap to pass through your childs a. legs. b. Keeps the shoulder straps on your childs shoulders. If a blanket is used for additional warmth, it must be placed outside the harness straps and tucked around your child. Make sure no blankets or other arti ...

  • Graco 8403 - page 21

    4. Place your child in the car bed so childs head is at the end with the ventilation slots. Refer to label on the front of the car bed. (The illustrations below show child laying on back. Y our child may need to lay in a different position depending on your doctors instructions.) 5. Position your childs shoulders at harness slot opening Í ...

  • Graco 8403 - page 22

    8. Check that harness straps are not twisted. T wisted straps can create slack in the harness and reduce the protection provided by the car bed. 9. T o be sure the straps are secure, pull up on the harness where the crotch and shoulder straps meet Ê . 10. Check that harness is snug on your childs shoulders. Y ou should not be able to insert mor ...

  • Graco 8403 - page 23

    5. Securing the Car Bed in Y our V ehicle There are many kinds of vehicles, seat belts, and occupant protection systems. As a result, it is not possible for this manual to tell you everything you need to know about putting this car bed in your vehicle. Y ou must carefully follow the instruc- tions provided by your vehicle manufacturer, as well as t ...

  • Graco 8403 - page 24

    Preparation and Initial Safety Checks 1. Make sure you have selected a suitable location for the car bed as explained in section 2 (page 9). Remember not to place child on the drivers side, and remember to position child so feet are toward the passenger side of the vehicle. 2. If a front passenger seat is used, slide the vehicle seat rearward as ...

  • Graco 8403 - page 25

    5. Thread the seat belt through all three guides as shown for a lap-only belt Ë and for a lap/shoulder belt Ì . There is no need to thread the shoulder portion of the belt through the three guides. 6. Buckle the seat belt. Make sure the buckle tongue goes into the correct buckle, and not the adjacent one Í . The seat belt should not be twisted o ...

  • Graco 8403 - page 26

    8. Now the vehicle seat belt must be tightened. When tightening the seat belt around the car bed, make sure there is no slack on either side of the car bed or along the belt path. T o create a very tight installation, first remove your child from the car bed. Push down hard with one hand in the middle of the car bed while pulling on the vehicle bel ...

  • Graco 8403 - page 27

    ! A manually adjusted lap belt Ì is tightened by pulling on the excess belt while pushing down hard on the car bed. However, you may have trouble tightening the belt because of the upright angle at which you must pull. Y ou may have to unbuckle the seat belt, estimate a seat belt length that will make the seat belt very tight, then buckle it again ...

  • Graco 8403 - page 28

    ! A lap/shoulder combination belt with a latchplate that can slide freely along the belt Ê requires the locking clip, unless your vehicles seat belt can be converted in another way , described in your vehicle owners manual. See your vehicle owners manual to find out if your seat belt can be converted to prevent movement of the lap portion ...

  • Graco 8403 - page 29

    Final Safety Checks 11 . Make sure child is secured with the harness according to section 4, Positioning and Securing Y our Child in the Car Bed (page 19). 12. Make sure that apnea monitors, oxygen tanks, or other medical equipment are not placed inside the car bed. Keep this equipment outside of the car bed, secured under the seat or on the ...

  • Graco 8403 - page 30

    6. Cleaning and Maintenance ! T o clean the car bed pad: 1. Remove the seat pad. DO NOT USE CAR BED without the seat pad. 2. Machine wash on delicate cycle and drip-dry . 3. Reinstall the car bed pad according to the instructions on pages 31-33. ! Car bed plastic shell may be cleaned by wiping with a mild soap and water solution. DO NOT USE BLEACH ...

  • Graco 8403 - page 31

    Reinstalling Pad and Harness If pad and harness have been removed for washing or replacement, it is very important to properly reinstall them in your car bed. V entilation slots in pad must be at the same end as ventilation slots in plastic car bed shell, and harness must be positioned to properly hold your child. Follow these instructions. 1. T ur ...

  • Graco 8403 - page 32

    Fuzzy side of harness UP V entilation slots 32 ...

  • Graco 8403 - page 33

    Low side High side V entilation slots V entilation slots Printed side 33 ...

  • Graco 8403 - page 34

    7. Registering Y our Car Bed Model No. Serial No. Purchase Date Dear Customer , Please fill in the above information. The model and serial numbers can be found on a label underneath your car bed. Fill out the prepaid registration postcard attached to the pad and mail it today . Child restraints could be recalled for safety reasons. Y ou must regist ...

  • Graco 8403 - page 35

    ...

  • Graco 8403 - page 36

    Graco Childrens Products Inc. Elverson, P A 19520 1-888-224-6549 ...

Fabricant Graco Catégorie Car Seat

Les documents que nous recevons du fabricant de l'appareilGraco 8403 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Graco
- manuels d’utilisations 8403
- fiches produit Graco
- dépliants
- ou étiquettes-énergie Graco 8403
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Graco 8403.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Graco 8403, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Graco 8403. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Graco 8403.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Graco 8403, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Graco 8403 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Graco 8403.

Le manuel d’utilisation complet Graco, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Graco 8403 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Graco 8403, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lGraco 8403 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Graco 8403 - qui devraient nous aider dans les premières étapes lors de l'utilisation Graco 8403
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Graco 8403
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Graco 8403 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Graco 8403?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Graco 8403, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Graco 8403 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)