-
Hanns.G AG172 - page 1
17 inch TFT LCD Monitor AG172 USER’S MANUAL ...
-
Hanns.G AG172 - page 2
User’s Manual Before operating the monitor, please read th is manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference S t atement This equipment has been tested and found to comp ly with the limit s for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designe ...
-
Hanns.G AG172 - page 3
User’s Manual TCO’99 Congratulations! You have just purchased a TCO’99 approved and labelled product! Your choice has provided you with a product developed for pr ofessional use. Your purchase has also contributed to reducing the bur den on the environment and also to the further development of environmentally adapted electronics products. Wh ...
-
Hanns.G AG172 - page 4
User’s Manual reduction of electrical and magnetical fields as well as work load and visual ergonomics. Below you will find a brief summa ry of the ecological requirem ents met by this product. The complete ecological criter ia document can be found at TCO Development’s website http://www.tcodevelopment.com or may be ordered from: TCO Developme ...
-
Hanns.G AG172 - page 5
User’s Manual The display unit is an electric device whic h may contain hazardous materials/ component s and that is needs to be taken care of at end of life according to following information /procedure: http://www .hellmann-pm.de RECYCLING INFORMA TION We, the Hanns.G care very much about our environmen t protection strategy and firmly believe ...
-
Hanns.G AG172 - page 6
User’s Manual T ABLE OF CONTENTS SAFETY NOTICE ........................................................................................... 7 PRECAUTIONS ......................................................................................... 7 SPECIAL NOTES ON LCD MONIT ORS ................................................... 8 BEFORE YOU OPERA T ...
-
Hanns.G AG172 - page 7
User’s Manual SAFETY NOTICE 1. The changes or modifications not expr essly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2. Shielded interface cables and AC power cord , if any , must be used in order to comply with the emission limits. 3. The manufacturer is not responsible for an ...
-
Hanns.G AG172 - page 8
User’s Manual SPECIAL NOTES ON LCD MONIT ORS The following symptoms are normal with LCD monitor and do not indicate a problem. • Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on agai n to make sure the flicker disappears. • Y ou may find slightly uneven bright ...
-
Hanns.G AG172 - page 9
User’s Manual BEFORE YOU OPERA TE THE MONIT OR FEA TURES • 17” TFT Color LCD Monitor • Crisp, Clear Display for Windows • Recommended Resolutions : 1280 X 1024 @60Hz • EP A ENERGY ST AR ® • Ergonomic Design • S pace Saving, Comp act Case Design CHECKING THE CONTEN TS OF THE P ACKAGE The product p ackage should include the following ...
-
Hanns.G AG172 - page 10
User’s Manual INST ALLA TION INSTRUCTIONS Inst all Remove Figure.1. Installing and Removing the Base INSTALLATION: 1. Align the monitor with the opening in the base. 2. Note that the longer secti on of the base points forward. 3. Snap the monitor into its base. A clear click sound will affirm that the base is connected correctly. 4. Verify that t ...
-
Hanns.G AG172 - page 11
User’s Manual CONTROLS AND CONNECT ORS CABLE CONNECTIONS: T urn of f your computer before performing the procedure below . 1. Connect one end of the 15-pi n D-Sub cable to the back of the monitor and connect the other end to the computer ’s D-Sub port. 2. Connect one end of the 24-pin DVI-D cable (Dual input mode optional) to the back of the mo ...
-
Hanns.G AG172 - page 12
User’s Manual ADJUSTING THE VIEWING ANGLE • For optimal viewing it is recommended to look at the full face of t he monitor , then adjust the monitor ’s angle to your own preference. • Hold the st and so you do not topple the monitor when you change the monitor ’s angle. • Y ou are able to adjust t he monitor ’ s angle from -5 ° to 20 ...
-
Hanns.G AG172 - page 13
User’s Manual OPERA TING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off. The other control buttons are located at front panel of the monitor (S ee Figure 4). By changing these settings, the picture can be adjusted to your personal preferences. • The power cord should be connected. • Connect the Signal c ...
-
Hanns.G AG172 - page 14
User’s Manual FRONT P ANEL CONTROL • Power Button: Press this button to switch ON/OFF of monitor ’s power . • Power Indicator: Green — Power On mode. Orange — Off mode. • MENU / ENTER: 1. Activate the OSD menu or adjust t he function settings and confirmation or 2. Exit OSD menu when in volume OSD status. • Volume < >: 1. Acti ...
-
Hanns.G AG172 - page 15
User’s Manual HOW TO ADJUST A SETTING OSD Diagram OSD Description Brightness adjustment: Select the 「 Brightness 」 option on the 「 Main Menu 」 . Enter the option and adjust the level. Contrast adjustment: Select the 「 Contrast 」 option on the 「 Main Menu 」 . Enter the option and adjust the level. How to adjust screen position and ...
-
Hanns.G AG172 - page 16
User’s Manual OSD Diagram OSD Description 16 Clock adjustment: Select the 「 Clock Adjustment 」 option to reduce the vertical flicker of characters on the screen. Enter the option and adjust the level. Phase adjustment: Select the 「 Phase Adjustment 」 option to reduce the horizontal flicker of characters on the screen. Enter the option and ...
-
Hanns.G AG172 - page 17
User’s Manual OSD Diagram OSD Description How to set the OSD: Select 「 OSD Setting 」 on the 「 Main Menu 」 , and then enter the option. OSD horizontal adjustment: Select the 「 OSD H-Position 」 option to adjust the horizontal pos ition of the OSD. Enter the option and adjust the level. OSD vertical position adjustment: Select the 「 OS ...
-
Hanns.G AG172 - page 18
User’s Manual OSD Diagram OSD Description 18 OSD color setting: Select the 「 OSD Color 」 setting option to adjust the color of the OSD. Enter the option and adjust the level. Language: Select the 「 Language 」 option to change the language of the OSD. Enter the option and select a language. (Reference only, the OSD Language is depended on ...
-
Hanns.G AG172 - page 19
User’s Manual OSD Diagram OSD Description Recall the factory settings: Select the 「 Factory Preset 」 option to reset to the monitor’s default setting. This will erase the current settings. Enter the option and select On or Off. Input Setting: Select the 「 Input Setting 」 option to change between the analog (D-Sub) or Digital (DVI) sourc ...
-
Hanns.G AG172 - page 20
User’s Manual TECHNICAL SUPPORT (F AQ) Q & A FOR GENERAL DEFECTIVE PROBLEM & QUESTION POSSIBLE SOLUTION Power LED is not on *Check if the Power Switch is in the ON position *Power Cord should be connected No Plug & Play *Check if the PC system is Plug & Play compatible *Check if the V ideo Card is Plug & Play compatible *Check ...
-
Hanns.G AG172 - page 21
User’s Manual ERROR MESSAGE & PO SSIBLE SOLUTION CABLE NOT CONNECTED : 1. Check that the signal-cable is pr operly co nnected, If the connector is loose, tighten the connector ’s screws. 2. Check the signal-cable’s connection pins for damage. INPUT NOT SUPPORT : Your computer has been set to unsuitable di splay mode, set the compu ...
-
Hanns.G AG172 - page 22
User’s Manual APPENDIX SPEC IFICA TIONS Driving system TFT Color LCD LCD Panel Size 43.2cm(17.0") Pixel pitch 0.264mm(H) x 0.264mm(V) V ideo R,G ,B Analog Interface Digital ( Dual-Input Model) H/V TTL Input H-Frequency 31KHz – 80KHz V -Frequency 55 – 75Hz Display Colors 16.2M Colors Max. Resolution 1280 x 1024 @75Hz Plug & Play VESA ...
-
Hanns.G AG172 - page 23
User’s Manual CONNECT OR PIN ASSIGNMENT 15 - Pin Color Display Signal Cable: 15 6 10 11 15 PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1. Red 9. +5V 2. Green 10. Ground 3. Blue 11. Ground 4. Ground 12. DDC-Serial Data 5. Ground 13. H-Sync 6. R-Ground 14. V-Sync 7. G-Ground 15. DDC-Serial Clock 8. B-Ground 24 - Pin Color Display Signal Cable: ...
Avez-vous une question à propos de Hanns.G AG172?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec Hanns.G AG172, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Hanns.G AG172 il est probable qu’il a envie de partager la façon de le résoudre.