-
AEG SCT71900S0 - page 1
SCT71900S0 EN FRIDGE-FREEZER USER MANUAL ...
-
AEG SCT71900S0 - page 2
FOR PERFECT RESULTS Thank you for choosing th is AEG product. We have created it to give you impe ccable performance for many years, with innovative techno logies that help make life simpler – features you mi ght not find on ordinary appliances. Please spend a fe w minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the A ...
-
AEG SCT71900S0 - page 3
CONTENTS 4 Safety information 6 Control panel 9 First use 10 Daily use 13 Helpful hints and tips 14 Care and cleaning 15 What to do if… 17 Technical data 18 Installation 25 Noises 27 Environmental concerns The following symbols are used in this user manual : Important information concerning your personal safety and information on how to avoid dam ...
-
AEG SCT71900S0 - page 4
SAFETY INFORMATIO N In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the ap - pliance are thoroughly familiar with its operation ...
-
AEG SCT71900S0 - page 5
– thoroughly ventilate the room in which the appliance is situated • It is dangerous to alter the specifications or modify this product in any wa y. Any damage to the cord may cause a short-circuit, fire and/or electric shock. WARNING! Any electrical component (power cord, plug, co mpres sor) must be replaced by a certified service agent or qua ...
-
AEG SCT71900S0 - page 6
• Regularly examine the drain in the refrigerator for defrosted water. If necessary, clean the drain. If the drain is blocked, water will collect in the bottom of the appliance. Installati on For electrical connection carefully follow the instructions given in specific paragraphs. • Unpack the appliance and check if there are damages on it. Do ...
-
AEG SCT71900S0 - page 7
2 Fridge ON/OFF switch 3 Fridge temperature regulator, + button 4 Fridge temperature indicator 5 Fridge temperature regulator, - button 6 DYNAMICAIR indicator 7 DYNAMICAIR button 8 Appliance Pilot light 9 Appliance ON/OFF switch 10 Freezer temperature regulator, + button 11 Freezer temperature indicator 12 Freezer temperature reg ulator, - button 1 ...
-
AEG SCT71900S0 - page 8
Press the alarm reset button. The alarm indicator light goes out and at the same time the freezer temperature indicator show for abou t 5 seconds the warmest temperature reached in the freezer compartment. Temperature setting buttons The temperature is adjusted using the temperature setting buttons. These buttons are con - nected to the temperature ...
-
AEG SCT71900S0 - page 9
COOLMATIC functi on The COOLMATIC function is suitable for quick cooling of large quantities of goods in the refrigerator. To activate the function, do these steps: 1. Press the Fridge Temperature - button (sev eral times if necessary) until the word “ SC” appears in the display. A temperature of +2°C is automatically selected. To deactivate t ...
-
AEG SCT71900S0 - page 10
Do not use detergents or abrasive powders, as these will damage the finish. DAILY USE Freezing fresh food The freezer compartment is suitable for free zing fresh food and storing frozen and deep- frozen food for a long time. To freeze fresh food activate the FROSTMATIC function at least 24 hours before placing the food to be frozen in the freezer c ...
-
AEG SCT71900S0 - page 11
Ice-cube production This appliance is equipped with one o r more trays for the production of ice-cubes. Fill these trays with water, then put them in the freezer compartment. Do not use metallic instruments to remove the trays from the freezer. Cold accumulators One or more cold accumulators are supplied in the freezer; these increase the length of ...
-
AEG SCT71900S0 - page 12
1. lift the shelf with the sliding box upwards and out of the holders in the door 2. remove the retaining bracket out of the guide under the shelf 3. Reverse the above operation to insert the sliding box at a different height. MAXIBOX drawer The drawer is suitable for storing fruit and vege - tables. There is a separator inside the drawer that can ...
-
AEG SCT71900S0 - page 13
HELPFUL HINTS AND TIPS Hints for energy saving • Do not open the door frequently or leave it open longer than absolutely necessary. • If the ambient temperature is high and the Temperature Regulator is set to low tempera - ture and the appliance is fully loaded, the compressor may run continuously, causing frost or ice on the evaporator. If thi ...
-
AEG SCT71900S0 - page 14
• water ices, if consumed immediately afte r removal from the freezer compartment, can possibly cause the skin to be freeze burnt; • it is advisable to show the freezing in date on each individual pack to enable you to keep tab of the storage time. Hints for storage of frozen food To obtain the best performance from this appliance, you should: ...
-
AEG SCT71900S0 - page 15
Defrosting of the refrigerator Frost is automatically eliminated from the evaporator of the refrigerator compartment ev - ery time the motor compressor stops, during normal use. The defrost water drains out through a trough into a special container at the back of the appliance, over the motor com - pressor, where it evaporates. It is important to p ...
-
AEG SCT71900S0 - page 16
There are some sounds during normal use (compressor, refrigerant circulation). Problem Possible cause Solution The appliance is noisy The appliance is not supported properly Check if the appliance stands sta - ble (all the four feet should be on the floor) The appliance does not operate. The lamp does not operate. The appliance is switched off. Swi ...
-
AEG SCT71900S0 - page 17
Problem Possible cause Solution Temperature ca nnot be set . FROSTMATIC or COOLMATIC functions switched on. Switch off FROSTMATIC or COOL - MATIC manually, or wait to set the temperature until the func - tion has reset automatically. Re - fer to "FROSTMATIC or COOLMAT - IC function".. The temperatur e in the appliance is too low/high. The ...
-
AEG SCT71900S0 - page 18
INSTALLATION WARNING! Read the "Safety Information" carefully for yo ur safety and correct operation of the appli - ance before installing the appliance. Positioning Install this appliance at a location where the ambient temperature correspo nds to the cli - mate class indicated on the rating plate of the appliance: Climate class Ambient ...
-
AEG SCT71900S0 - page 19
1 Green and Yellow: Earth 3 Brown: Live 5 Blue: Neu tral As the colours of the wires in the mains lead of this appliance may not cor respond with the coloured markings identifying the terminals in your plug, proceed as follo ws: 1. Connect the wire coloured green and yellow to the terminal marked either with the let - ter “E“ or by the earth sy ...
-
AEG SCT71900S0 - page 20
3. Unscrew the pins (B) and spacers (C). 4. Remove the lower door. 5. Loosen the lower pin. On the opposite side: 1. Install the lower pin. 2. Install the lower door. 3. Refit the pins (B) and the spacers (C) on the middle hinge on the opposite side. 4. Install the upper door. 5. Tighten the spacer and tighten the upper pin. Ventilation requirement ...
-
AEG SCT71900S0 - page 21
1. If necessary cut the adhesive sealing strip and then apply it to the appliance as shown in figure. 2. Drill the hinge cover A, as shown in fig - ure. Apply the covers A and A1 (in the acces - sories bag) in to the middle hinge. 3. Install the appliance in the niche. Push the appliance in the direction of the arrow (1) until the upper gap cover s ...
-
AEG SCT71900S0 - page 22
4. Adjust the appliance in the niche. Make sure that the distance between the appliance and the cupboard fr ont- edge is 44 mm. The lower hinge cover (in the accessories bag) makes sure that the distance be - tween the appliance and the kitchen furniture is correct. Make sure that the clearance between the appliance and the cupboard is 4 mm. Open t ...
-
AEG SCT71900S0 - page 23
7. Attach the covers (C, D) to the lugs and the hinge holes. Install the vent grille (B). Attach the hinge covers (E) to the hinge. 8. If the appliance must connect laterally to the kitchen furniture door: a) Slacken the screw s in fixing brackets (H). b) Move the brackets (H). c) Retighten the screws. 9. Disconnect the parts (Ha), (Hb), (Hc) and ( ...
-
AEG SCT71900S0 - page 24
10. Install the part (Ha) on the inner side of the kitchen furniture. 11. Push the part (Hc) on the part (Ha). 12. Open the appliance door and the kitch - en furniture door at an angle of 90°. Insert the small square (Hb) into guide (Ha). Put together the appliance door and the furniture door and mark the holes. ca. 50 mm ca. 50 mm 21 mm 90° 90° ...
-
AEG SCT71900S0 - page 25
13. Remove the brackets and mark a dis - tance of 8 mm from the outer edge of the door where the nail must be fitted (K). 14. Place the small square on the guide again and fix it with the screws sup - plied. Align the kitchen furniture door and the appliance door by adjusting the part Hb. 15. Press the part (Hd) on the part (Hb). Do a final check t ...
-
AEG SCT71900S0 - page 26
BRRR! HISSS! CLICK! BLUBB! CRACK! SSSRRR! OK CLICK! CLICK! BRRR! BRRR! BLUBB! BLUBB! 26 Noises ...
-
AEG SCT71900S0 - page 27
HISSS! HISSS! SSSRRR! SSSRRR! CRACK! CRACK! ENVIRONMENTAL CONCERNS The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly ...
-
AEG SCT71900S0 - page 28
www.aeg.com/shop 222356012-B-032011 ...
Avez-vous une question à propos de AEG SCT71900S0?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec AEG SCT71900S0, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec AEG SCT71900S0 il est probable qu’il a envie de partager la façon de le résoudre.