Français dropdown-ico

Manuel d’utilisation Kenmore POWER MISER 153.32636

32 pages 1.93 mb
Télécharger

Aller à la page of 32

Summary
  • Kenmore POWER MISER 153.32636 - page 1

    Owners Manual FOR POTABLE WATER HEATING ONLY NOT SUITABLE FOR SPACE HEATING Model No. 153.326360 30 Gal. 153.326361 30 Gal. 153.326460 40 Gal. 153.326461 40 Gal. 153.326560 50 Gal. 153.326561 50 Gal. 153.326660 50 Gal. Medium 153.326661 50 Gal. Medium 153.326760 40 Gal. Medium 153.326761 40 Gal. Medium 153.326860 50 Gal. Short 153.326861 50 Gal. Sh ...

  • Kenmore POWER MISER 153.32636 - page 2

    Safety Precautions _,WARNING J Improper installation, adjustment, alteration, service or maintenance can cause DEATH, SERIOUS BODILY INJURY, J OR PROPERTY DAMAGE. Refer to this manual for assis- tance or consult your local Sears Service Center for further information. _WARNING At the time of manufacture this water heater was provided with a combina ...

  • Kenmore POWER MISER 153.32636 - page 3

    Table of Contents Safety Precautions .............................................................................................................................................. .2 Table of Contents ............................................................................................................................................... .3 Cu ...

  • Kenmore POWER MISER 153.32636 - page 4

    Customer Responsibilities Thank You for purchasing a Sears water heater. Properly installed and maintained, it should give you years of trouble free service. If you should decide that you want the new water heater professionally installed, contact the local Sears Service Center or any Sears store. They will arrange for prompt, quality installation ...

  • Kenmore POWER MISER 153.32636 - page 5

    Materials and Basic Tools Needed Materials Needed _lb simplify the installation Sears has available the installation parts shown below. You may or may not need all of these materi- als, depending on your type of installation. WATER HEATER INSTALLA. TION KIT WITH FLEXIBLE CONNECTORS FOR 3/4" OR 1/2" THREADED OR COPPER PLUMBING EXPANSION TA ...

  • Kenmore POWER MISER 153.32636 - page 6

    Installation Instructions Removing the Old Water Heater O_(i_rn "OFF" electrical supply to the water heater. ] QTurn "OFF" the water supply to the water heater at the water shutoffvalve or water meter. Q Attach a hose to the water heater drain valve and put the other end in a floor drain or outdoors. Open the water heater drain ...

  • Kenmore POWER MISER 153.32636 - page 7

    Installation Instructions (cont'd) Facts to Consider About the Location Facts to Consider About the Convertible Lower Element You should carefully choose an indoor location for the new water heater, because the placement is a very important consideration for the safety of the occupants in the building and for the most economical use of the app ...

  • Kenmore POWER MISER 153.32636 - page 8

    Installation Instructions (cont'd) Water Piping *A WARNING HOTTER WATER CAN SCALD: Water heaters are intended to produce hot water. Water heated to a tem- perature which will satisfy space heating, clothes washing, dish washing, and other sanitizing needs can scald and _ermanently injure you upon contact. Some people are more likely to be perm ...

  • Kenmore POWER MISER 153.32636 - page 9

    Installation Instructions (cont'd) Temperature-Pressure Relief Valve _,WARNING At the time of manufacture this water heater was provided with a combination temperature-pressuras relief valve cer- tiffed by a nationally recognized testing laboratory that maintains periodic inspection of production of listed equip- ment or materials, as meeting ...

  • Kenmore POWER MISER 153.32636 - page 10

    Installation Instructions (cont'd) Filling the Water Heater "Ib fill the water heater with water: Close the water heater drain valve by turning the handle to the right (clockwise). The drain valve is on the lower front of the water heater. Open the cold water supply valve to the water heater. NOTE: The cold water supply valve must be left ...

  • Kenmore POWER MISER 153.32636 - page 11

    Installation Instructions (cont'd) Converting the Lower Element (cont'd) 2. The convertible element is located behind the lower access panel of the water heater. Remove the two screws securing the access panel, and remove panel. 5. Remove the screws from terminal 2 of the element, and move the looped end of the wire aside. 3. Remove the i ...

  • Kenmore POWER MISER 153.32636 - page 12

    Installation Instructions (cont'd) Converting the Lower Element (cont'd) 9. Replace terminal cover on thermostat making sure that the locking tabs on the terminal cover are in place. 12. Complete wiring to the water heater, or if completed, turn "ON" electric power to the water heater after filling the tank with water. _,WARNING ...

  • Kenmore POWER MISER 153.32636 - page 13

    Installation Instructions (cont'd) Wiring Diagrams STANDARD WIRING FOR 2 WIRE LEAD WATER HEATERS NON-SIMULTANEOUS OPERATION 240 VOLT DOUBLE ELEMENT UPPER THERMOSTAT TO ELECTRIC POWER SUPPLY RED UNCTION BOX UPPER HEATING ELEMENT S BAR _ FOR 5500 WATTS FOR 3800 WATT BLACK RED LOWER HEATING ELEMENT WIRING FOR 3 WIRE LEAD WATER HEATERS NON-SIMULTA ...

  • Kenmore POWER MISER 153.32636 - page 14

    Installation Instructions (cont'd) Wiring A CAUTION J Never use this water heater unless it is completely full of J water. To prevent damage to the tank and heating ele- I ment, the tank must be filled with water. Water must flow from the hot water faucet before turn ng on power. You must provide all wiring of the proper size outside of the wa ...

  • Kenmore POWER MISER 153.32636 - page 15

    Installation Instructions (cont'd) Installation Checklist • Whether or not the element conversion is made, the model rating plate must be marked• Using a hard point ink pen, check the appropriate block within the model rating plate, which is located adjacent to the lower access panel. • Is the fuse or circuit breaker size correct as show ...

  • Kenmore POWER MISER 153.32636 - page 16

    Service and Adjustment Temperature Regulation &WARNING HOTTER WATER CAN SCALD: Water heaters are intended to produce hot water. Water heated to a tem- perature which will satisfy space heating, clothes wash- ing, dish washing, and other sanitizing needs can scald and permanently injure you upon contact. Some people are more likely to be permane ...

  • Kenmore POWER MISER 153.32636 - page 17

    Service Adjustment (cont'd) Upper and Lower Thermostat Adjustment (Refer to thermostat illustrations under "Thermostats") NOTE: It is not necessary to adjust the upper thermostat. However, if it is adjusted above the factory set point of 120°F (HOT) is is recommended that it not be set higher than the lower thermostat setting. The u ...

  • Kenmore POWER MISER 153.32636 - page 18

    Service and Adjustment (cont'd) Element Cleaning/ Replacement NOTE: These instructions are written for element cleaning and element replacement for the lower element. If it is neces- sary to clean or replace the upper element, then repeat these instructions. "Ib remove the element from your tank in order to clean or replace it: 1. Before ...

  • Kenmore POWER MISER 153.32636 - page 19

    Service and Adjustment (cont'd) TERMINAL COVER ON UPPER THERMOSTAT 10. A new gasket should be used in all cases to prevent a possi- ble water leak. (See Element Gasket in the Parts Order List Chart). Place the new element gasket on the thread side of the cleaned or new element and screw into tank, securing tightly using an element wrench. 7. D ...

  • Kenmore POWER MISER 153.32636 - page 20

    Service and Adjustment (cont'd) Element Cleaning/ Replacement (cont'd) 16. Replace terminal cover on thermostat making sure that the locking tabs on the terminal cover are in place. 17. Replace the insulation block and pad so that it completely covers the thermostat and element. Drain Valve Washer Replacement NOTE: For replacement, use a ...

  • Kenmore POWER MISER 153.32636 - page 21

    Troubleshooting Guide Start Up Conditions THERMAL EXPANSION Water supply systems may, because of such events as high line pressure, frequent cut-off_, the effects of water hammer among others, have installed devices such as pressure reducing valves, check valves, back flow preventers, etc.-to control these types of _roblems. When these devices are ...

  • Kenmore POWER MISER 153.32636 - page 22

    Troubleshooting Guide Operational Conditions SMELLY WATER In each water heater there is installed at least one anode rod (see parts section) for corrosion protection of the tank. Certain water conditions will cause a reaction between this rod and the water. The most common complaint associated with the anode rod is one of a "rotten egg smell&q ...

  • Kenmore POWER MISER 153.32636 - page 23

    Troubleshooting Guide (cont'd) HIGH TEMPERATURE SHUT OFF SYSTEM (cont'd) • Remove the two screws securing the access panel and remove panel. • Remove the insulation block and pad. • Reset the high limit by pushing in the red button marked "RESET". O_ _I RESET BUTTON @ ru_nc.rr • Replace the insulation block and pad so th ...

  • Kenmore POWER MISER 153.32636 - page 24

    Troubleshooting Guide (cont'd) Leakage Checkpoints Use this guide to check a "Leaking" water heater. Many suspect- ed "Leakers" are not leaking tanks. Often the source of the water can be found and corrected. If you are not thoroughly familiar with electric codes, the water heater, and safety practices, contact your local S ...

  • Kenmore POWER MISER 153.32636 - page 25

    Notes 25 ...

  • Kenmore POWER MISER 153.32636 - page 26

    Parts Order List KENMORE POWER MISER rM 6 ELECTRIC WATER HEATERS MODEL NUMBERS: 153.326360 30 Gal. 153.326361 30 Gal. 153.326460 40 Gal. 153.326461 40 Gal. 153.326560 50 Gal. 153.326561 50 Gal. NOTE A: UPPER ELEMENT: These water heaters are equipped with 3800 watt elements. LOWER ELEMENT: These water heaters are equipped with factory installed conv ...

  • Kenmore POWER MISER 153.32636 - page 27

    Parts Order List (cont'd) KENMORE POWER MISER TM 6 ELECTRIC WATER HEATERS MODEL NUMBERS: 153.326360 30GM. 153.326361 30GM. 153.326460 40GM. 153.326461 40GM. 153.326560 50GM. 153.326561 50GM. KEY PART NO. DESCRIPTION 1. _l_mperature-Pressure Relief Valve* 2. Roto-Swirl TM Dip "lhbe (See NOTE "B" page 26) 3. Primary Anode Rod 4. D ...

  • Kenmore POWER MISER 153.32636 - page 28

    Parts Order List KENMORE POWER MISER rM 6 ELECTRIC WATER HEATERS MODEL NUMBERS: 153.316354 30 Gal. 153.316355 30 Gal. 153.316454 40 Gal. 153.316455 40 Gal. 153.316554 50 Gal. 153.316555 50 Gal. NOTE A: UPPER ELEMENT: These water heaters are equipped with 3800 watt elements. LOWER ELEMENT: These water heaters are equipped with factory installed conv ...

  • Kenmore POWER MISER 153.32636 - page 29

    Parts Order List (cont'd) KENMORE POWER MISER TM 6 ELECTRIC WATER HEATERS MODEL NUMBERS: 153.326660 30 Gal. Short 153.326661 30 Gal. Short 153.326760 40 Gal. Short 153.326761 40 Gal. Short KEY PART NO. DESCRIPTION 1. _l_mperature-Pressure Relief Valve* 2. Roto-Swirl TM Dip "lhbe (See NOTE "B" page 28) 3. Primary Anode Rod 4. Dra ...

  • Kenmore POWER MISER 153.32636 - page 30

    Parts Order List (cont'd) KENMORE POWER MISER rM 6 ELECTRIC WATER HEATERS MODEL NUMBERS: 153.326860 50 Gal. Short 153.326861 50 Gal. Short NOTE A: UPPER ELEMENT: These water heaters are equipped with 3800 watt elements. LOWER ELEMENT: These water heaters are equipped with factory installed convertible elements, which can be operated at 3800 wa ...

  • Kenmore POWER MISER 153.32636 - page 31

    Parts Order List (cont'd) KENMOREPOWERMISER TM 6 ELECTRIC WATERHEATERS MODEL NUMBERS: 153.326860 50GM. Short 153.326861 50GM. Short KEY PART NO. DESCRIPTION 1. _l_mperature-Pressure Relief Valve* 2. Roto-Swirl TM Dip "lhbe (See NOTE "B" page 30) 3. Primary Anode Rod 4. Drain Valve 5. Drain Valve Washer (_/_2"xI_,/'x gs ...

  • Kenmore POWER MISER 153.32636 - page 32

    FULL ONE YF_R WARRANTY ON WATER HEAFER For one year from the date of purchase, when your Sears Kenmore water heater is installed and operated in a slngle-family residence in accordance with the instructions in this manual, Sears will: 1. Repair defects in material or workmanship in this water heater, free of charge. 2. Furnish and install a new cur ...

Fabricant Kenmore Catégorie Water Heater

Les documents que nous recevons du fabricant de l'appareilKenmore POWER MISER 153.32636 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Kenmore
- manuels d’utilisations POWER MISER 153.32636
- fiches produit Kenmore
- dépliants
- ou étiquettes-énergie Kenmore POWER MISER 153.32636
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Kenmore POWER MISER 153.32636.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Kenmore POWER MISER 153.32636, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Kenmore POWER MISER 153.32636. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Kenmore POWER MISER 153.32636.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Kenmore POWER MISER 153.32636, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Kenmore POWER MISER 153.32636 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Kenmore POWER MISER 153.32636.

Le manuel d’utilisation complet Kenmore, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Kenmore POWER MISER 153.32636 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Kenmore POWER MISER 153.32636, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lKenmore POWER MISER 153.32636 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Kenmore POWER MISER 153.32636 - qui devraient nous aider dans les premières étapes lors de l'utilisation Kenmore POWER MISER 153.32636
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Kenmore POWER MISER 153.32636
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Kenmore POWER MISER 153.32636 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Kenmore POWER MISER 153.32636?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Kenmore POWER MISER 153.32636, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Kenmore POWER MISER 153.32636 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)