-
JVC HR-J677MS - page 1
H R-J777MS H R-J677MS VIDEO CASSETTE RECORDER LPT0425-001B ® INSTRUCTIONS PAL NTSC SP/LP/EP DISLAY PR COLOUR SYSTEM REC LINK VIDEO ( MONO ) L–AUDIO–R STANDBY/ON TM TM REVIEW SP + 8 4 0 6 15dB NORM MENU 123 456 7 89 0 1 OK VCR CABLE/ DVD/SAT TV 2 4 EXPRESS 3 PROG 30 SEC TV PR – TV PR + + TV TV – E N T E R / E N T R E E PR DATE STOP FIN STAR ...
-
JVC HR-J677MS - page 2
2 EN SAFETY FIRST IMPORT ANT n Please read the various precautions on this page before installing or operating the recorder . n It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs without the consent of the owner of copyright in the sound or video record- ing, broadcast or cable programme and in an y litera ...
-
JVC HR-J677MS - page 3
EN 3 Basic Connections CHECK CONTENTS 1 Make sure the package contains all of the accessories listed in "Specifications" ( Z pg. 47). SITUA TE RECORDER 2 Place the recorder on a stable, horizontal surface. CONNECT RECORDER TO TV 3 The connection method you use depends on the type of TV you have. RF CONNECTION ● T o Connect T o A TV W it ...
-
JVC HR-J677MS - page 4
4 EN V ideo Channel Set INITIAL SETTINGS V ideo Channel (RF Output Channel) is the channel on which your TV receives picture and sound signals from the video recorder through the RF cable. If you have connected the video recorder to your TV via the provided RF cable only (RF connection) – Go to "With RF Connection" below . If you have c ...
-
JVC HR-J677MS - page 5
EN 5 (Ex.) If channel 50 is available in your area SET VIDEO CHANNEL 3 Set your TV to UHF channel 40. ● If the two vertical white bars appear clearly on the screen as shown in the illustration ( Z "TEST SIGNAL" on page 4), press OK and then go to step 4 . ● If the two vertical w hite bars do not appear clearly , press OK and then PR + ...
-
JVC HR-J677MS - page 6
6 EN 123 456 7 89 0 1 2 4 3 INITIAL SETTINGS (cont.) Auto Set Up Before starting, make sure of the following: ● T he TV aerial cable should be connected to the recorder . ● The recorder's mains power cord should be connected to a mains outlet. Z pg. 3 ● T he "Video Channel Set" procedure should be done first and the TV should b ...
-
JVC HR-J677MS - page 7
EN 7 7 89 0 1 4 3 AUTO CH SET PLEASE WAIT ST ART FINISH TV Screen When Auto Set Up is completed, the lowest position number will appear on the front display panel. During Auto Set Up "PLEASE W AIT" blinks on the screen and "Auto" blinks on the front display panel. NOTES: ● If you perform Auto Set Up when the aerial cable is no ...
-
JVC HR-J677MS - page 8
8 EN q6 PR. 12 ] SP 23 : 59 NTSC 3.58 31. 12. 95 ST HIFI –9 : 59 : 59 L R 0 ++ + + INITIAL SETTINGS (cont.) On-Screen Displays Y ou can choose w hether or not to have various oper ational indicators appear on screen, by setting this function ON or OFF . T urn on the TV and select the VIDEO channel (or A V mode). TURN ON THE RECORDER 1 Press . ACC ...
-
JVC HR-J677MS - page 9
EN 9 Select Language T urn on the TV and select the VIDEO channel (or A V mode). MAIN MENU FUNCTION SET TUNER SET INITIAL SET [ 5 / ∞ ] = [MENU] : EXIT fi fi fi TURN ON THE RECORDER 1 Press . ACCESS MAIN MENU SCREEN 2 Press MENU . ACCESS INITIAL SET SCREEN 3 Press PUSH JOG %fi to place the pointer next to "INITIAL SET", then press O ...
-
JVC HR-J677MS - page 10
10 EN Clock Set T urn on the TV and select the VIDEO channel (or A V mode). TURN THE RECORDER ON 1 Press . ACCESS MAIN MENU SCREEN 2 Press MENU . ACCESS INITIAL SET SCREEN 3 Press PUSH JOG %fi to place the pointer next to "INITIAL SET", then press OK or PUSH JOG . ACCESS CLOCK SET SCREEN 4 Press PUSH JOG %fi to place the pointer next to ...
-
JVC HR-J677MS - page 11
EN 11 123 456 7 89 0 1 2 4 3 PLA YB A CK Basic Playback The easiest, most basic operation possible with your video recorder is tape pla yback. Already-recorded signals on a video tape are read by your video recorder and displayed on your TV just like a TV programme. LOAD A CASSETTE 1 Make sure the window side is up, the rear label side is facing yo ...
-
JVC HR-J677MS - page 12
12 EN 123 456 7 89 0 1 2 4 3 Playback Features V ariable-Speed Search ACTIV A TE V ARIABLE-SPEED SEARCH 1 During pla yback, press PUSH JOG or . ● T he more times you press, the faster the playbac k picture moves. ● T o decrease speed, press the button for the opposite direction. T o resume normal playback, press PLA Y . High-Speed Search NOTE: ...
-
JVC HR-J677MS - page 13
EN 13 123 456 7 89 0 1 2 4 3 REVIEW FF PAUSE STOP PLAY REW Manual T racking Y our video recorder is equipped with automatic trac king control. During playback, you can override this and adjust the tracking manually by pressing the PR +/– buttons. OVERRIDE AUTOMA TIC TRACKING 1 Press (SP/LP/EP) on the remote to engage manual tracking. ADJUST TRACK ...
-
JVC HR-J677MS - page 14
14 EN Index Search Y our recorder automatically marks index codes at the beginning of each recording. T his function gives you quick access to an y one of 9 index codes in either direction. NOTE: Before starting, make sure the recorder is in the Stop mode. ACTIV A TE INDEX SEARCH 1 Press PUSH JOG or ( ™ or £ ) on the remote control. " ™ 1 ...
-
JVC HR-J677MS - page 15
EN 15 Next Function Memor y T he Next Function Memory "tells" the recorder what to do after rewinding. Before continuing, ensure that the recorder is in the Stop mode. a– F or A utomatic Start Of Playbac k After T ape Rewind... ...press REW , then press PLA Y within 2 seconds. b– F or A utomatic P ower Off After T ape Rewind... ...pre ...
-
JVC HR-J677MS - page 16
16 EN Soundtrack Selection Y our video recorder is capable of recording three soundtrac ks (HI-FI L, HI-FI R and NORM) and will play back the one you select. During Playback Pressing AUDIO changes the soundtrack being played back as follows: TRA CK USE Recorder's On-Screen Front Panel Display HI FI F or Hi-Fi stereo tapes L R HI FI F or main a ...
-
JVC HR-J677MS - page 17
EN 17 123 456 7 89 0 1 2 4 3 TV signals being received b y the recorder's built-in tuner can be recorded onto a video tape. Y ou can "capture" a TV programme using your video recorder . RECORDING Basic Recording LOAD A CASSETTE 1 Insert a cassette with the record safety tab intact. ● The counter is reset to 0:00:00 and the recorder ...
-
JVC HR-J677MS - page 18
18 EN 123 456 7 89 0 1 2 4 3 Recording Features Record One Pr ogramme While W atching Another SELECT CHANNEL TO W A TCH 1 Once recording is in progress, all you need to do is to set the channel controls on the TV for the station you wish to view . ● T he programme selected with the TV's channel controls appears on the TV screen while the one ...
-
JVC HR-J677MS - page 19
EN 19 (HR-J777MS only) Receiving Stereo And Bilingual Pr ogrammes Y our recorder is equipped with a Sound-Multiplex decoder (A2) and a Digital stereo sound decoder (NIC AM) as well, making reception of stereo and bilingual broadcasts possible. When the channel is c hanged, the type of broadcast being received will be displa yed on the TV screen for ...
-
JVC HR-J677MS - page 20
20 EN 123 456 7 89 0 1 2 4 3 B.E.S.T . Picture System T urn on the TV and select the VIDEO channel (or A V mode). T he B.E.S.T . (Biconditional Equalised Signal T racking) system checks the condition of the tape in use during recording and playbac k, and compensates to provide the highest-possible recording and playbac k pictures. T he default sett ...
-
JVC HR-J677MS - page 21
EN 21 Recording ST ART RECORDING 1 Press and hold RECORD and press PLA Y on the remote, or press RECORD on the recorder . DURING B.E.S.T . B.E.S.T . COMPLETE ● The recorder spends approximately 7 seconds assessing the condition of the tape, then begins recording. NOTES: ● T he B.E.S.T . system w orks for both SP and LP (or EP) modes only after ...
-
JVC HR-J677MS - page 22
22 EN 123 456 7 89 0 1 2 4 3 TIMER RECORDING (HR-J777MS only) TM TM System Setup T urn on the TV and select the VIDEO channel (or AV mode). Guide Program Number Set ACCESS MAIN MENU SCREEN 1 Press MENU . ACCESS INITIAL SET SCREEN 2 Press PUSH JOG %fi to place the pointer next to "INITIAL SET", then press OK or PUSH JOG . ACCESS G-CODE/ S ...
-
JVC HR-J677MS - page 23
EN 23 ENTER RECEIVING CHANNEL POSITION NUMBER 5 Press PUSH JOG %fi or NUMBER keys to input the number of the recorder's channel position on w hich the Guide Program number's broadcast is received. T hen press OK or PUSH JOG . ● If the satellite broadcast is recei ved on your recorder's auxiliary channel ("L-1" or "F ...
-
JVC HR-J677MS - page 24
24 EN G-CODE/SHOWVIEW 12345678 [0 – 9] = [ ] : DELETE [PROG] : EXIT ACCESS G-CODE/ SHOWVIEW SCREEN 1 Press PROG . ENTER G-CODE NUMBER 2 Press the NUMBER keys to enter the G- CODE number of a programme y ou wish to record. ● If you make a mistake, press and input the correct number . ACCESS G-CODE PROGRAM SCREEN 3 Press OK , and the G- CODE Prog ...
-
JVC HR-J677MS - page 25
EN 25 RETURN TO NORMAL SCREEN 5 Press PROG or OK . "PROGRAM COMPLETED" appears on the screen for about 5 seconds, then normal screen appears. ● Repeat steps 1 – 5 for each additional programme. ENGAGE RECORDER'S TIMER MODE 6 Press ‰ ‰ ‰ ‰ ‰ . The recorder turns off automatically and " ‰ " appears on the disp ...
-
JVC HR-J677MS - page 26
26 EN 123 456 7 89 0 1 2 4 3 Express Timer Pr ogramming Remember , the clock must be set before y ou can programme the timer ( Z pg. 10). Before performing the following steps: ● Insert a cassette with the safety tab in place. The recorder will come on automatically . ● T urn on the TV and select the VIDEO channel (or AV mode). ● Select the a ...
-
JVC HR-J677MS - page 27
EN 27 123 456 7 89 0 1 2 4 3 SET T APE SPEED 6 Press SP/LP/EP ( ) to set the tape speed. RETURN TO NORMAL SCREEN 7 After confirming all information is correct, press PROG or OK . "PROGRAM COMPLETED" appears on the screen for about 5 seconds, then normal screen appears. ● Repeat steps 1 – 7 for each additional programme. ENGAGE RECORDE ...
-
JVC HR-J677MS - page 28
28 EN TIMER RECORDING (cont.) Check, Cancel And Replace Pr ogrammes DISENGAGE TIMER MODE 1 Press ‰ ‰ ‰ ‰ ‰ , then press . ACCESS PROGRAMME CHECK SCREEN 2 Press ‰ ‰ ‰ ‰ ‰ ? . ACCESS PROGRAMME SCREEN 3 Press ‰ ‰ ‰ ‰ ‰ ? again to check more information. Each time you press ‰ ‰ ‰ ‰ ‰ ? , the next programme's ...
-
JVC HR-J677MS - page 29
EN 29 When programmes overlap each other If “PROGRAM OVERLAPPED” appears, you have another programme overlapping the programme you have just made. The Programme Check screen appears and conflicting programmes will start blinking. Example: Programme 1 (you have just made) and Programme 4 ov erlap each other . 123 456 7 89 0 1 2 4 3 START+/– DA ...
-
JVC HR-J677MS - page 30
30 EN Auto Timer When the Auto T imer is set to ON the timer is automatically engaged when the recorder power is turned off and automati- cally disengaged when the recorder is powered back on. ACCESS MAIN MENU SCREEN 1 Press MENU . ACCESS FUNCTION SET SCREEN 2 Press PUSH JOG %fi to place the pointer next to "FUNCTION SET", then press OK ...
-
JVC HR-J677MS - page 31
EN 31 7 89 0 1 4 3 Automatic Sat- ellite Pr ogram Recording SP/LP/EP This facility allows you to automatically record a satellite program whic h is timer -programmed on your external satellite receiver . Connect a satellite receiver to the recorder's rear AUDIO/VIDEO IN connectors and program the timer on the satellite receiver; the recorder s ...
-
JVC HR-J677MS - page 32
32 EN Remote A/B Code Switching T he remote control is capable of controlling two JVC video recorders independently; one set to respond to the remote control's A code control signals and another set to respond to B code control signals. T he remote control is preset to send A code signals because your video recorder is initially set to respond ...
-
JVC HR-J677MS - page 33
EN 33 Contr ol Y our TV Using Additional Buttons Use the NUMBER keys, and the button, button or ‰ ‰ ‰ ‰ ‰ button to select the TV's channel. ● With televisions under Code 01, 02, 07, 08, 10, 11, 14, 20, 22, 23, 24, 25, 27, 33, 35, 38, 40 or 42, the button corresponds to the 1-digit/2-digit entry switching button (often labelled – ...
-
JVC HR-J677MS - page 34
34 EN SET BRAND CODE 1 Refer to the c hart below . While holding down CABLE/ SA T/D VD on the recorder's remote control, enter one of the brand code corresponding to the make of your unit using the NUMBER keys, then press OK . Check if the unit's power goes off as it should. If it does, try other operations ( Z step 2 ). ● Once you have ...
-
JVC HR-J677MS - page 35
EN 35 CABLE BOX BRAND NAME CODE JVC 72, 73, AMSTRAD 60, 61, 62, 63, 92 BT 72 CANAL+ 81 C ANAL SA TELLITE 81 D-box 85 ECHOST AR 51, 78, 79, 80, 82 FINLUX 68 GALAXIS 69, 88 GRUNDIG 64, 65 HIRSCHMANN 64 ITT 68 JERROLD 01, 04, 06, 11, 12, 15, 28, 75 KA THREIN 70, 71 LUXOR 68 MASPRO 70 NOKIA 68, 87 P ACE 67, 86, 92 P ANASONIC 13, 14, 74 PFT 69 PHILIPS 6 ...
-
JVC HR-J677MS - page 36
36 EN 123 456 7 89 0 1 2 4 EDITING Edit T o Or Fr om Another V ideo Recorder Y ou can use your video recorder as the sour ce pla yer or the recording deck. MAKE CONNECTIONS 1 Connect the pla yer's AUDIO/VIDEO OUT connector to the recorder's A UDIO/VIDEO IN connector . ● Use the L connector for monaural connection. SET RECORDING DECK&apo ...
-
JVC HR-J677MS - page 37
EN 37 123 456 7 89 0 1 2 4 Y ou can use a camcorder as the source pla yer and your video recorder as the recorder . Edit Fr om A Camcorder MAKE CONNECTIONS 1 Connect the camcorder's AUDIO/VIDEO OUT connec- tors to the recorder's front panel A UDIO/VIDEO input connectors. ● Use the L connector for monaural connection. ● When a Master E ...
-
JVC HR-J677MS - page 38
38 EN INFORMA TION ON MUL TI-SYSTEM COMP A TIBILITY Setting Of The Colour System Select Buttons Use the COLOUR SYSTEM button on the front panel to select the colour system. Pressing the COLOUR SYSTEM displays the current setting on the screen. While the current setting is displayed, press COLOUR SYSTEM again to change the mode as illustrated on the ...
-
JVC HR-J677MS - page 39
EN 39 Playback T his recorder can play back all 3 types of recorded tape. VIDEO OUT AUDIO OUT RF OUT NTSC 4.43 MHz NTSC PAL MESECAM PAL MESECAM NTSC [ PAL NTSC 3.58 MHz PAL SECAM NTSC 3.58 NTSC 4.43 PAL (B/G, D/K, I, H) NTSC (M) Recorded tape Playbac k cir cuit Manual switching Manual switching Multi-system receiver Multi-system monitor NOTES: When ...
-
JVC HR-J677MS - page 40
40 EN 123 456 7 89 0 1 2 4 3 T urn on the TV and select the VIDEO channel (or A V mode). TUNER SET TURN ON THE RECORDER 1 Press . ACCESS MAIN MENU SCREEN 2 Press MENU . ACCESS TUNER SET SCREEN 3 Press PUSH JOG % fi to place the pointer next to "TUNER SET", then press OK or PUSH JOG . SELECT AUTO CH SET MODE 4 Press PUSH JOG % fi to plac ...
-
JVC HR-J677MS - page 41
EN 41 Manual Channel Set Store channels that were not stored during Auto Set Up ( Z pg. 6) or Auto Channel Set ( Z pg. 40). ACCESS TUNER SET SCREEN 1 Perform steps 1 – 3 of "Auto Channel Set" on page 38. ACCESS CHANNEL LIST 2 Press PUSH JOG % fi to place the pointer next to "CH EDIT", then press OK or PUSH JOG . SELECT POSITI ...
-
JVC HR-J677MS - page 42
42 EN TUNER SET (cont.) Delete A Channel ACCESS TUNER SET SCREEN 1 Perform steps 1 – 3 of "Auto Channel Set" on page 40. ACCESS CHANNEL LIST 2 Press PUSH JOG %fi to place the pointer next to "CH EDIT", then press OK or PUSH JOG . SELECT CHANNEL 3 Press PUSH JOG %fi to until the channel you want to delete begins blinking. DEL ...
-
JVC HR-J677MS - page 43
EN 43 Fine-T uning Channels ACCESS TUNER SET SCREEN 1 Perform steps 1 – 3 of "Auto Channel Set" on page 38. ACCESS CHANNEL LIST 2 Press PUSH JOG %fi to place the pointer next to "CH EDIT", then press OK or PUSH JOG . SELECT CHANNEL TO FINE-TUNE 3 Press PUSH JOG %fi until the channel you want to tune begins blinking, then pre ...
-
JVC HR-J677MS - page 44
44 EN TROUBLESHOOTING Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily corrected, and this can sa ve y ou the trouble of sending your video recorder off for repair . POSSIBLE CAUSE ● T he mains power cord is discon- nected. ● " ‰ " is displa yed o ...
-
JVC HR-J677MS - page 45
EN 45 CORRECTIVE ACTION Insert a cassette, or using adhesiv e tape, reseal the slot where the tab was removed. Set to the desired channel. Confirm that the source is properly connected. Confirm that all units' power switc hes are turned on. Set the input mode to "L-1" or "F-1". Confirm that the camcorder is properly connect ...
-
JVC HR-J677MS - page 46
46 EN CORRECTIVE ACTION Position the camcorder so its microphone is aw a y from the TV . T urn the TV's volume down. If you need the skipped c hannels, restore them. ( Z pg. 41) Press P AUSE to pause the recording, change channels, then press PLA Y to resume recording. Perform manual setting again. Connect the TV aerial cable to the recorder p ...
-
JVC HR-J677MS - page 47
EN 47 QUESTIONS AND ANSWERS PLA YBACK Q. What happens if the end of the tape is reac hed during playback or search? A. The tape is automatically rewound to the beginning. Q. Can the video recorder indefinitely remain in the still mode? A. No. It stops automatically after 5 minutes to protect the heads. Q. During searc h, slow , still and frame-b y- ...
-
JVC HR-J677MS - page 48
48 EN INDEX 1 Mains P ower Cord Z pg. 3 2 Lithium Battery Compartment Z pg. 5 3 Remote P AUSE Connector Z pg. 37 4 ANT . IN Connector Z pg. 3 FRONT VIEW 1 ST ANDBY/ON Button Z pg. 8 2 Cassette Loading Slot 3 SP/LP/EP Button Z pg. 17 4 Rewind [REW] Button Z pg. 11, 12 5 PLA Y Button Z pg. 11 6 F ast F orw ard [F F] Button Z pg. 11, 12 7 VIDEO/AUDIO ...
-
JVC HR-J677MS - page 49
EN 49 DISPLA Y P ANEL 1 B .E.S.T . Picture System Displa y Z pg. 20 2 Symbolic Mode Indicators 4 Channel Display Clock Display 5 T ape Speed Indicators Z pg. 17 6 Instant REVIEW Indicator Z pg. 13 7 Audio Level Indicator 8 "Cassette Loaded" Mark 9 Counter Display 0 Mode Display (L-1 or F-1) 8 9 0 7 1 4 6 5 2 3 REVIEW SP + 8 4 0 6 15dB NOR ...
-
JVC HR-J677MS - page 50
50 EN INDEX (cont.) REMOTE CONTROL Buttons with a small dot on the left side of the name can also be used to operate your TV Z pg. 33. 1 TV Button Z pg. 33 2 VCR Button Z pg. 33 3 TV/VCR Button Z pg. 33 4 REVIEW Button Z pg. 13 5 NUMBER Keys Z pg. 17 6 VSP/PDC Button Z (no function) 7 Button Z pg. 28 0000 Button Z pg. 18 8 ST OP +/– Button Z pg. ...
-
JVC HR-J677MS - page 51
EN 51 SPECIFIC A TIONS GENERAL Power requirement Rating : AC 110 V – 240 V ` , 50/60 Hz Operating : AC 90 V – 260 V ` , 50/60 Hz Power consumption : 19 W T emperature Operating : 5°C to 40°C Storage : –20°C to 60°C Operating position : Horizontal only Dimensions (WxHxD) : 400 mm x 94 mm x 278 mm W eight : 3.3 kg Format : VHS standard Maxi ...
-
JVC HR-J677MS - page 52
COPYRIGHT © 2000 VICTOR COMPANY OF JAPAN, LTD. MS Printed in Malaysia 0600IYV * YP * PJ VICTOR COMP ANY OF JAPAN, LIMITED HR-J777MS HR-J677MS ® Registered Trademark owned by VICTOR COMPANY OF JAPAN, LTD. ® EN ...
Avez-vous une question à propos de JVC HR-J677MS?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec JVC HR-J677MS, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec JVC HR-J677MS il est probable qu’il a envie de partager la façon de le résoudre.