Français dropdown-ico

Manuel d’utilisation Jura Capresso ENA 4

32 pages 0.42 mb
Télécharger

Aller à la page of 32

Summary
  • Jura Capresso ENA 4 - page 1

    Operating Instructions and W arranty Customer Service 1-800-220-5701 Fully Automatic Cof fee & Espr esso Center CAPRESSO ENA ENA 3 ENA 4 ENA 5 68191 ...

  • Jura Capresso ENA 4 - page 2

    IMPOR T ANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. T o protect against fire, electric shock and personal injury , do not immerse cord, plugs or appliance in water or other liquids. 4. Cl ...

  • Jura Capresso ENA 4 - page 3

    Notice : Y our Jura ENA has a 3-prong grounded plug. T o reduce the risk of electrical shock, this plug will fit in an outlet only one way . If the plug does not fit in the outlet, contact a qualified electrician. DO NOT modify the plug in any way . CAUTION This appliance is for household use. Any servicing other than cleaning and user maintenance ...

  • Jura Capresso ENA 4 - page 4

    4. Fig. 1 1. Removable water tank with lid and Clearyl filter holder (Fig. 6 & 7) 2. On/Off button 3. Removable bean container lid 4. Grinder Fineness Adjustment Ring (Fig. 12 &13) 5. Cover for Programming and Rinse buttons (Fig. 4) 6. Rotary Dial with push button and illumination 7. Three-color alphanumeric display 8. Selector Switch for c ...

  • Jura Capresso ENA 4 - page 5

    5. Fig. 3 Fig. 4 Fig. 5 Fig. 6 P button Rinse button Rotary Dial with push button ENA 5 with frothXpress Coffee position Hot W ater / Steam position T o open Clearyl filter holder T o close Clearyl filter holder ENA 5 ENA 5 ENA 5 1-cup position 2-cup position Rinsing position Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 ...

  • Jura Capresso ENA 4 - page 6

    6. Tip Sleeve Rod Frothing down Steaming up Light roast: finer setting Dark roast: coarser setting Max: 2 spoons of pre-gr ound coffee Steam nozzle Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Dual Frother PLUS ...

  • Jura Capresso ENA 4 - page 7

    7. V enting tip Frothing range 12 to 2 o'clock Steaming range 4 to 6 o'clock Chrome Nozzle Steam only no siphoning Milk Hose V enting tip Milk Hose Cappuccino rinsing T ablet cleaning Remove protective grinder shield with Phillips screwdriver T ur n Burr Grinder Release T ool slowly counter clockwise (see chapter 30) Fig. 19 Fig. 20 Fig. ...

  • Jura Capresso ENA 4 - page 8

    T able of Contents 8. Important Safeguards......................................................... 2 Customer Service Information ........................................... 3 Illustrations ...................................................................... 4-7 1. Product W arranty Registrations ............................ 10 2. Quick Referenc ...

  • Jura Capresso ENA 4 - page 9

    9. T able of Contents 14b. Visual pr ogramming of cup size ........................... 21 15. W ater care ............................................................. 21 16. W ater Hardness Monitor ....................................... 21 16.1 Changing the water har dness monitor ................. 22 17. Clear yl W ater Filter Cartridge ........ ...

  • Jura Capresso ENA 4 - page 10

    1. PRODUCT WARRANTY REGISTRA TION Please remove the Pr oduct Registration from the ENA pouch, fill it out and mail or fax it to us within two weeks after purchasing your machine or register your pr oduct online through our web- site: www .capresso.com. Important: This r egistration is part of your warranty (chapter 32). In case your retailer sent t ...

  • Jura Capresso ENA 4 - page 11

    machine is on you can choose between ener gy saving and always ready stand-by mode. High-end materials, a rich platinum metallic treatment (ENA 4 and ENA 5) and tasteful chrome accents make the ENA the highlight of any kitchen. Enjoy your JURA ENA! 3.1 BEAN-TO-CUP / “CREMA COFFEE" / HIGH PRESSURE BREWING Accor ding to the majority of cof fee ...

  • Jura Capresso ENA 4 - page 12

    • Never fill fr ozen beans into the bean container . If you store beans in the freezer , let them thaw 3 to 4 hours before filling them into the bean container . • Never fill anything other than cof fee beans into the bean container (no chocolate, rice, nuts, spices, etc.) • Never fill anything but fr esh, cold clean water into the water cont ...

  • Jura Capresso ENA 4 - page 13

    • machine is NOT placed on a surface which is sensitive to heat, water and steam. • Plug-in machine. 6.1 TURNING THE MACHINE ON • Pr ess the On/Off button on top of the machine (Fig 1,2). The display will illuminate. FILL WA TER T ANK 6.2 FILLING THE WA TER T ANK Please note: Only use fresh, cold water . Never fill water tank with carbonated ...

  • Jura Capresso ENA 4 - page 14

    7. ADJUSTING THE GRINDER The Grinder Fineness Adjustment Ring is set to a medium grind position. W e recommend leaving the grinder in this position for most applications. Please note: Y ou can only adjust the grinder during grinding. • If you have extremely dark r oasted, oily beans, set the grinder to a coarser setting. T urn the ring counter -c ...

  • Jura Capresso ENA 4 - page 15

    9b. BREWING ONE CUP If you press the Rotary Dial, the ENA will pr oduce a 5 oz. cup of coffee in normal str ength. READY , NORMAL , 1 CUP , READY ENA 5 only: If you brew one cup we r ecommend tur ning the coffee spout to the one-cup position (Fig. 9). Cof fee will flow from one spout into your cup. 9c. BREWING TWO CUPS The display shows READY . • ...

  • Jura Capresso ENA 4 - page 16

    READY • Place one or two cups under the cof fee spouts. • Move the small lever to the fr ont to open the chute and insert the coffee funnel (Fig. 14). The display shows FILL PRE- GROUND . • Add one or two scoops of pre-gr ound coffee, remove the funnel and close the chute. The display shows 1 CUP * . • Pr ess the Rotary Dial. The ENA will t ...

  • Jura Capresso ENA 4 - page 17

    12a. USING THE DUAL FROTHER PLUS ENA 3 and 4 only: The Dual Frother Plus is alr eady attached. ENA 5 only: Remove the frothXpr ess (Fig. 20), and attach the Dual Frother to the steam nozzle. Make sur e it is pushed up completely against the steam nozzle (Fig. 17). Caution : If the Dual Frother is not attached pr operly or it is clogged (see chapter ...

  • Jura Capresso ENA 4 - page 18

    Selector Switch to the Hot W ater/Steam position (Fig. 5). Let hot water run through the fr other for about 3 seconds and then stop. This will flush out any small milk droplets. Thorough cleaning of the Dual Fr other parts: • Remove the Dual Frother fr om the Steam Nozzle (Fig. 17) and unscrew the tip fr om the rod (Fig. 18). Make sure the two si ...

  • Jura Capresso ENA 4 - page 19

    Selector Switch to the coffee position. READY . • Place the cup underneath the coffee spouts and add a shot of espresso. Push the Rotary Dial. 1 CUP . Once the br ewing starts change the volume to 1.5 or 2.0 oz. by turning the Rotary Dial. READY . Enjoy your Cappuccino! (2) Making two Cappuccinos or Lattes at the same time Please note: if you wan ...

  • Jura Capresso ENA 4 - page 20

    • Place a cup underneath the frothXpress and place a cup with some cold water next to the machine. • Insert the milk hose into this cup (Fig. 23). • Point the fr othXpress dial to the 12 o’clock position. READY . • T ur n the Rotary Dial until STEAM is displayed and push the Rotary Dial. The display shows HEA TING . • When the display s ...

  • Jura Capresso ENA 4 - page 21

    1. Push and hold the P button (Fig. 4) until the display shows RINSE . 2. T urn the Rotary Dial until the display shows PRODUCT . 3. Push the Rotary Dial. The display shows WA TER . 4. Push the Rotary Dial again. The display shows 5.0 OZ . 5. T urn the Rotary Dial until the display shows 3.0 OZ . 6. Push the Rotary Dial to confirm. The display show ...

  • Jura Capresso ENA 4 - page 22

    strip to determine the water hardness: • Insert the strip for one second into the water you want to use. Shake off any access water and wait for one minute. One or more sections of the indicator strip will turn reddish. • Change the water hardness setting accor ding to the table below . W ater Hardness level Display Equivalent Indicator strip . ...

  • Jura Capresso ENA 4 - page 23

    READY 1. Open the cover behind the Rotary Dial. (Fig. 1,5) 2. Push and hold the P button (Fig. 4) until the display shows RINSE . 3. T urn the Rotary Dial until the display show FIL TER – 4. Push the Rotary Dial. The display shows NO – 5. T urn the Rotary until the display shows YES ✓ 6. Push the Rotary dial again to confirm. The display show ...

  • Jura Capresso ENA 4 - page 24

    Since the W ater Hardness Selector is off, the machine will not remind you when to decalcify . This could clog and damage your machine. 17.3 MANUAL CLEAR YL REPLACEMENT If the filter is more than 2 months old and the display does not indicate to replace filter , replace as follows. READY . • Push and hold the P button until the display shows RINS ...

  • Jura Capresso ENA 4 - page 25

    25. EMPTY TRA Y . 9. Remove the cup and then the drawer and tray . 10. Empty drawer and ground coffee container and r eplace. 11. The display shows READY . The machine will automatically remind you after the next 180 cups of coffee to r epeat this cycle. 18.2 MANUAL T ABLET CLEANING CYCLE It is possible that the brewing pr ocess slows down before t ...

  • Jura Capresso ENA 4 - page 26

    4. Replace the complete assembly . 5. The display shows AGENT IN T ANK . 6. Remove and empty the water tank. (The Clearyl filter should not be in the water tank!) 7. Dissolve 3 of the large squar e decalcifying tablets in a container with 18 oz. of water (0.5 liters) and pour the solution into the water tank and replace. 8. The display shows OPEN T ...

  • Jura Capresso ENA 4 - page 27

    READY . • Push and hold the P button (Fig. 4) until display shows RINSE . • Push the P button again. The display again shows RINSE . • Push the P button a thir d time. The display shows RINSING . After a few seconds the rinse cycle stops automatically . READY . ENA 5 only: turn the spout again to the 1- or 2-cup position. 19. ENERGY SA VING M ...

  • Jura Capresso ENA 4 - page 28

    RINSE . • T ur n the Rotary Dial until the display shows LANGUAGE • Push the Rotary Dial ENGLISH • T ur n the Rotary Dial to ESP ANOL • Push the Rotary Dial to confirm: OK , IDIOMA (Language) • Push the P button to leave the pr ogramming mode. LISTO (ready). 23. KEEPING YOUR MACHINE IN TOP SHAPE Keeping your ENA in good working condition ...

  • Jura Capresso ENA 4 - page 29

    water into the drawer (Fig. 1.13). This makes sure that no warm water stays in the heating system. Each cup of coffee always starts with fresh cold water . TRA Y MISSING . The drawer is not inserted or not inserted correctly . Insert drawer correctly . FILL BEANS . The bean container is empty . Add beans to the bean container . FILL WA TER T ANK . ...

  • Jura Capresso ENA 4 - page 30

    bubbles than the frothXpr ess. Solution 1: T ake the Dual Frother apart and make sure that all grooves and holes ar e free of milk deposits (Fig. 18). Solution 2: Check the steam nozzle (Fig.17). If the steam nozzle is blocked by hardened milk, use a needle, toothpick or paper- clip and loosen up the milk deposit. let some hot water pass through th ...

  • Jura Capresso ENA 4 - page 31

    3 weeks. Always keep extra tablets available. Tip : These tablets will also remove cof fee and tea discoloration and oil films in other containers (tea kettles, thermal carafes etc.) Fill container with water , add one or two tablets and let stand overnight. Rinse thoroughly). Auto-Cappuccino Cleaner (chapter 13e). One sample bottle with 100 ml inc ...

  • Jura Capresso ENA 4 - page 32

    JURA-CAPRESSO any other liability in connection with the sale of the machine. JURA-CAPRESSO expressly disclaims liability for incidental and consequential damages caused by the machine. The terms "incidental damages" refer to the loss of the original purchasers time, loss of the use of the machine or other costs relating to the car e and ...

Fabricant Jura Capresso Catégorie Coffeemaker

Les documents que nous recevons du fabricant de l'appareilJura Capresso ENA 4 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Jura Capresso
- manuels d’utilisations ENA 4
- fiches produit Jura Capresso
- dépliants
- ou étiquettes-énergie Jura Capresso ENA 4
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Jura Capresso ENA 4.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Jura Capresso ENA 4, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Jura Capresso ENA 4. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Jura Capresso ENA 4.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Jura Capresso ENA 4, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Jura Capresso ENA 4 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Jura Capresso ENA 4.

Le manuel d’utilisation complet Jura Capresso, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Jura Capresso ENA 4 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Jura Capresso ENA 4, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lJura Capresso ENA 4 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Jura Capresso ENA 4 - qui devraient nous aider dans les premières étapes lors de l'utilisation Jura Capresso ENA 4
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Jura Capresso ENA 4
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Jura Capresso ENA 4 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Jura Capresso ENA 4?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Jura Capresso ENA 4, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Jura Capresso ENA 4 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)