Français dropdown-ico

Manuel d’utilisation Barco R9010300

165 pages 7.6 mb
Télécharger

Aller à la page of 165

Summary
  • Barco R9010300 - page 1

    RLM H5 Owners manual R9010300 R5976817/03 02/06/2006 ...

  • Barco R9010300 - page 2

    Barco nv Eve nts Noordl aan 5, B-8520 Kuurne Phone: +32 56.36.89.70 Fax: +32 56.36.88.24 E-mail: sales.events@barco.com Visit us at the web: www.barco.com P r i n t e di nB e l g i u m ...

  • Barco R9010300 - page 3

    Changes Barco provides this manual ’as is’ without warranty of any kind, either ex pressed or implied, including but not limited to the i mplied war- ranties or merchantability and fitness for a particular purpose. Ba rco m ay make improvements and/or changes to the product(s) and/or the program(s) described in this publication at any time with ...

  • Barco R9010300 - page 4

    ...

  • Barco R9010300 - page 5

    Table of con tents T ABLE OF CONTENTS 1 . P a c k a g i n g a n d D i m e n s i o n s ...................................................................................... 5 1 . 1 B o x c o n t e n t ........... ................... ............... ................... ............... .................. ............... ........ ... 5 1 . 2 P r o j e ...

  • Barco R9010300 - page 6

    Table of con tents 7 . G e n e r a l M e n u ......................................................................................................5 7 7.1 General Menu overview . . .............................. ............... ................... ............... .................. .......... 5 7 7 . 2 P a u s e ................................ ... ...

  • Barco R9010300 - page 7

    Table of con tents 1 3 . 3 M e n u b a r p o s i t i o n ....................... ................... ............... .................. ............... .................. ...... 1 2 0 1 3 . 4 S t a t u s b a r p o s i t i o n ........................... .................. ............... ................... ............... ............ ........1 2 ...

  • Barco R9010300 - page 8

    Table of con tents 4 R5976817 RL M H5 02/06/2006 ...

  • Barco R9010300 - page 9

    1. Pa ckaging and Dimensions 1. P ACKAGING AND DIMENSIONS Overview • Box content • Projector Packaging • Dimensions 1.1 Box content CEE7 European power plug to connect the power cord to the wall outlet. ANSI 73.1 1 American power plug to connect the power cord to the wall outlet. Content • 1 RLM H5 projector (weight ± 30 kg or 67 lbs) • ...

  • Barco R9010300 - page 10

    1. Packaging and Dime nsions PULL TO OPE Image 1-1 Image 1 -2 Projector packa ging Save the original shipping carton and packi ng material, they will be necessary if yo u ever have to ship your projector . For maxim um protection, repack your projector as it w as originally packed at the factory . 6 R5976817 RL M H5 02/06/2006 ...

  • Barco R9010300 - page 11

    1. Pa ckaging and Dimensions 1.3 Dimensions Side view 289,7 11,406 [] 2,3 ,091 [] 316,5 12 461 [ ] 2 4,5 ,965 [ ] Image 1-3 Side view Front view 705 [27.76] 51.9 [ 2.04 ] 43 [1.69] 180 [7.09] 93.5 [3.68] Image 1-4 Front view R5976817 RL M H5 02/06/2006 7 ...

  • Barco R9010300 - page 12

    1. Packaging and Dime nsions Bottom view 170 [6.69] 60 [2.36] 170 [6.69] 1 3 0 [ 5 . 1 2 ] 6 0 [ 2 . 3 6 ] 1 3 0 [ 5 . 1 2 ] 120 [4.72] 60 [2.36] 354.5 [ 1 3 . 96] 200 [7.87] 120 [4.72] 27.2 [1.07] 76.8 ° 2 [0.079] 188.8 [7.43] 492.4 [19.39] 1 3 0 [ 5 . 1 2 ] 6 0 [ 2 . 3 6 ] 1 3 0 [ 5 . 1 2 ] Image 1-5 Bottom view 8 R5976817 RL M H5 02/06/2006 ...

  • Barco R9010300 - page 13

    1. Pa ckaging and Dimensions To p v i e w 460 [18.11] 122.5 [4.82] 570 [22.44] 82.5 [3.25] 540 [21.26] 705 [27.76] 82.5 [3.25] 707.8 [27 87] 122.5 [4.82] Image 1-6 To p v i e w R5976817 RL M H5 02/06/2006 9 ...

  • Barco R9010300 - page 14

    1. Packaging and Dime nsions 10 R5976817 RL M H5 02/06/2006 ...

  • Barco R9010300 - page 15

    2. Installation Guidelines 2. INST ALLA TION GUIDELINES Overview • General • Projector Configuration • Lenses • Battery Insertion in the R emote Control • Stacking projectors • Rigging points and accessories W ARNING : Before installing t he projector , read first the safety instructions. C AUTION : Harmful Environ mental Contamina tion ...

  • Barco R9010300 - page 16

    2. Installation G uidelines components. Failure to take suitable precautions to protect the pr ojector from the effects of persistent and prolonged air contam- inants will culminate in extensive and irreve rsible ingrained optical damage. At this stage cleaning of the internal optical units will be non-effective and impracticable. Damage of this na ...

  • Barco R9010300 - page 17

    2. Installation Guidelines PD A B C PD Image 2-1 Front-Ceiling con figuration A Side view B T op view CB a c k v i e w PD Distance projector - screen R5976817 RL M H5 02/06/2006 13 ...

  • Barco R9010300 - page 18

    2. Installation G uidelines PD A B C PD Image 2-2 Front-T able c onfigura tion A Side view B T op view CB a c k v i e w PD Distance projector - screen 2.3 Lenses Overview • Lenses • Lens formulas • Lens installation • Cleaning the lens 2.3.1 Lense s A vailabl e lenses RLD lenses (standard lenses): Lenses Order num ber RLD (0.8) R9832640 RLD ...

  • Barco R9010300 - page 19

    2. Installation Guidelines Lenses Order num ber R L D( 3-4 . 5: 1 ) R9832645 RLD (4.5 - 7.0 : 1) R9832646 TLD HB lenses: Lenses Order num ber TLD HB (0.8) R9842040 TLD HB (1.6 - 2) R9842060 TLD HB (2 - 2.8) R9842080 TLD HB (2.8 - 5) R9842100 TLD HB (5 - 8) R9642120 TLD lenses can be used on the projector together with the optical lens adaptor kit T ...

  • Barco R9010300 - page 20

    2. Installation G uidelines Metric Formulas (mete r) Inch formulas (inch) TLD HB (2.8 - 5) Wide PD = 2.83 x SW - 0.14 PD = 2.83 x SW - 5.51 Te l e PD = 5.15 x SW - 0 .35 PD = 5.15 x SW + 13.78 TLD HB (5 - 8) Wide PD = 4.94 x SW + 0.01 PD = 4.94 x SW + 0.39 Te l e PD = 8.23 x SW - 0 .26 PD = 8.23 x SW - 10.24 2.3.3 Lens installat ion The default len ...

  • Barco R9010300 - page 21

    2. Installation Guidelines C AUTION : Do not use fabric softener when washi ng the cleaning cloth or softener sheets when dryin g the cloth. Do not use liquid cleaners on the cloth as doing so w ill contaminate the cloth . Other lenses can also be cleaned s afely with this T oraysee TM cloth. 2.4 Battery Insertion in the Remote Control Where to fin ...

  • Barco R9010300 - page 22

    2. Installation G uidelines 2.5 Stacking p rojectors What is possible? Up to 2 projectors can be stacked on each other without using extra tools or accessories. How to stack? Handle as follow: 1. Put the second projector on the fi rst one so that base plate of t he second projector matches with the rigging socket of the first projector . (image 2-7 ...

  • Barco R9010300 - page 23

    2. Installation Guidelines Image 2-8 Closing the riggin g sockets Image 2-9 Mounting t he securit y chain 2.6 Riggi ng points and acce ssories 2.6.1 Overview Clamps Slo ts are made in the carry handle frame for easy inserting the overlockers and for easy adjusting the clamps position so that this position matches with the rigging p oints. Consult a ...

  • Barco R9010300 - page 24

    2. Installation G uidelines 6. T urn the mova ble connecting-piece almost fully onto the bolt. Stops w ith a small distance between the clamp assembly and the second nut so that the movable c onnecting-piece is still turnable (5). 7. T urn n ow the connecting-piece into the direction of the lens and secure this position by turning up the second nu ...

  • Barco R9010300 - page 25

    3. Connecti ons 3. CONNECTIONS Overview • Power connection • Input Source Connections • 5-Cable input • Composite Video Input • S-Video input • Digital Visual Interface (DVI) input • Computer input (RGB analog) • SDI or HDSDI input • Communication connection • Extended configuration 3.1 Power connection AC power (mains) cord con ...

  • Barco R9010300 - page 26

    3. Connecti ons 3.2 Input Source Connections Overview • Input section • Input facilities 3.2.1 Input section Input Layers The input section is divided in layers, each o f them regrouping severa l inputs, this architecture allows the input section to be upgraded at any time with an optional analog or digital layer . 1. Layer 1: analog layer cont ...

  • Barco R9010300 - page 27

    3. Connecti ons L1 L2 L3 L4 TWO WAY HARDWIRED REMOTE 2 1 3 PUSH R/PR G/Y B/PB Hs/Cs Vs VIDEO (HD)SDI IN (HD)SDI OUT S-VIDEO R.C. 10 BASE-T DVI ANALOG RGB RS 232/422 IN POWER WIRELESS RECEIVER RS 232/422 OUT Image 3-2 Input facilities L1 Layer 1 = RGBHV + Composite Video + S-Video L2 Layer 2 = DVI + Computer + RS232IN + RC (wired remot e control) L3 ...

  • Barco R9010300 - page 28

    3. Connecti ons TWO WAY HARDWIRED REMOTE 2 1 3 PUSH R/PR G/Y B/PB Hs/Cs Vs VIDEO (HD)SDI IN (HD)SDI OUT S-VIDEO R.C. 10 BASE-T DVI ANALOG RGB RS 232/422 IN POWER WIRELESS RECEIVER RS 232/422 OUT Image 3-3 5-cable i nput Component Video In Component Video the term component describes a number (3) of elements that are needed to make up th e video pic ...

  • Barco R9010300 - page 29

    3. Connecti ons Component Video signals (PR/Y/PB) Some interfaces use progressive o utput signals with a double lin e frequency of 32 kHz. The video decoder used for the video signals is not appropriate fo r these signals since it can only handle 15 kHz signals. This signal ha s theref ore to be i nternal ly redi rected , this is don e in the Sourc ...

  • Barco R9010300 - page 30

    3. Connecti ons 3.5 S-Video input Input specificat ion TWO WAY HARDWIRED REMOTE 2 1 3 PUSH R/PR G/Y B/PB Hs/Cs Vs VIDEO (HD)SDI IN (HD)SDI OUT S-VIDEO R.C. 10 BASE-T DVI ANALOG RGB RS 232/422 IN POWER WIRELESS RECEIVER RS 232/422 OUT Image 3-5 S-Video indic ation Pin configurat ion 4 pin connecto r 4 3 1 2 Image 3-6 For S-Video For Video pin 1 : ea ...

  • Barco R9010300 - page 31

    3. Connecti ons Which signal can be connected ? Standard S-Video (S-VHS) with separate Y (luma) and C (chroma) signals. I ne x t e n d e dm o d ea l s oC o m p o s i t ev i d e oc a nb ec o n n e c t e dt ot h eS - V i d e op l u g . How to select the S-Vid eo input ? 1. Press 4 on the RCU Note: Another way for selecting this input is via Source on ...

  • Barco R9010300 - page 32

    3. Connecti ons TWO WAY HARDWIRED REMOTE 2 1 3 PUSH R/PR G/Y B/PB Hs/Cs Vs VIDEO (HD)SDI IN (HD)SDI OUT S-VIDEO R.C. 10 BASE-T DVI ANALOG RGB RS 232/422 IN POWER WIRELESS RECEIVER RS 232/422 OUT Image 3-7 DVI indication. DVI-I type connector analog li nk (4 pins at the right side of th e connector) not support ed. Pin assignment for the DVI connect ...

  • Barco R9010300 - page 33

    3. Connecti ons 3.7 Computer input (RGB analog) Input specificat ion TTL sync input : U min =2 . 0V RGB input = 0.7 V pp ±3 d B TWO WAY HARDWIRED REMOTE 2 1 3 PUSH R/PR G/Y B/PB Hs/Cs Vs VIDEO (HD)SDI IN (HD)SDI OUT S-VIDEO R.C. 10 BASE-T DVI ANALOG RGB RS 232/422 IN POWER WIRELESS RECEIVER RS 232/422 OUT Image 3-8 Analog inpu t What can be connec ...

  • Barco R9010300 - page 34

    3. Connecti ons Input specificat ions (HD)SDI input : BNC (HD)SDI output : BNC (= loop through) typical : 0.8 Vpp 75 Ω terminated output impedance: 75 Ω TWO WAY HARDWIRED REMOTE 2 1 3 PUSH R/PR G/Y B/PB Hs/Cs Vs VIDEO (HD)SDI IN (HD)SDI OUT S-VIDEO R.C. 10 BASE-T DVI ANALOG RGB RS 232/422 IN POWER WIRELESS RECEIVER RS 232/422 OUT Image 3-9 (HD) ...

  • Barco R9010300 - page 35

    3. Connecti ons TWO WAY HARDWIRED REMOTE 2 1 3 PUSH R/PR G/Y B/PB Hs/Cs Vs VIDEO (HD)SDI IN (HD)SDI OUT S-VIDEO R.C. 10 BASE-T DVI ANALOG RGB RS 232/422 IN POWER WIRELESS RECEIVER RS 232/422 OUT (a) (b) Image 3- 10 Applicati ons of the RS232/422 connect ion Remote control: • easy adjustment of projector via IBM P C (or compatible) or MAC connecti ...

  • Barco R9010300 - page 36

    3. Connecti ons TWO WAY HARDWIRED REMOTE 2 1 3 PUSH R/PR G/Y B/PB Hs/Cs Vs VIDEO (HD)SDI IN (HD)SDI OUT S-VIDEO R.C. 10 BASE-T DVI ANALOG RGB RS 232/422 IN POWER WIRELESS RECEIVER RS 232/422 OUT Image 3-1 1 Wireless receiver connectio n 3.10 Extended configuration Overview • Introduction • 5-cable extended configuration • S-Video extended con ...

  • Barco R9010300 - page 37

    3. Connecti ons Inputs R G B H V VID EO RGBHV R G B H V - RG S B R G S B - - - RGBS R G B S - - Component PR Y PB - - - S-Video - - - - C Y S-Video C - Y - - - Composite VIDEO ---- - Composite - VIDEO - - - - Composite - - VIDEO - - - Composite - - - - VIDEO Signals Composite - ---- VIDEO T able 3-4 Extended configur ation of the 5-ca ble input: th ...

  • Barco R9010300 - page 38

    3. Connecti ons How to set up the S-Video extende d configurati on ? 1. Connect the video sources to the desired connector (image 3-15) Note: An adapter cable is required Chroma Luma Video Y R/PR G/Y B/PB Hs/Cs Vs VIDEO S-VIDEO Video C Image 3- 15 Connecting 2 composi te Video sign als to the S-Vi deo connector Multiple video signa ls can not be vi ...

  • Barco R9010300 - page 39

    4. Getting Sta rted 4. GETTING ST ARTED Overview • T erminology overview • Switching on • Lamp runtime • Switching to standby • Switching off • T emperature error DMD •U s i n g t h e R C U • Projector address • Controlling the projector • Quick lens adjustment • Digital Zoom • Quick Picture in Pict ure selection 4.1 T ermin ...

  • Barco R9010300 - page 40

    4. Getti ng Started F1 F2 F3 MENU BACK ENTER PAUSE PIP PHASE TINT COLOR BRIGHTN CONTR VOL 9 0 7 8 5 6 3 4 1 2 LOGO AUTO IMAGE DIGI ZOOM SDI SB-PC DVI VIDEO S-VIDEO RGB PC LENS ZOOM LENS SHIFT LENS FOCUS TEXT 1 21 19 2 3 4 5 6 7 8 9 10 11 12 13 16 14 15 18 20 17 Image 4-1 No. Key name Description 1 Function keys user programmable keys with funct ion ...

  • Barco R9010300 - page 41

    4. Getting Sta rted No. Key name Description 10 Lens control use these buttons to obtain the desired ZOOM, SHIFT , FOCUS. 11 VOL Used as lens shift left - right. 12 Picture controls use these buttons to obtain the desired picture analog level. 13 DIGI ZOOM allows a digital Zoom of a part of the image 14 FREEZE press to freeze the projected image. 1 ...

  • Barco R9010300 - page 42

    4. Getti ng Started 4.3 Lamp runtime x T o generalize for the different projector types, x refers here to the maximum run time of the lamp. The maximum run time is given in the specifications. Lamp runtime indicati on while running Independently of the lamp mode, when the total runtime of an active l amp (lamp 1 for example) is (x -30) hours or mor ...

  • Barco R9010300 - page 43

    4. Getting Sta rted Switching t o Standby . When the proj ector is r unning an d you want to go to standby , press the st andby key f or 2 seconds until the mess age ’Saving data, please wa it’ is displayed. Do not press any lo nger on the standby key otherwise the projector will restart. 4.5 Sw itchi ng off How to swi tch off the pro jector? 1 ...

  • Barco R9010300 - page 44

    4. Getti ng Started Hardwired Remote i nput 1. Plug one end of the remote cable in the connector on the bottom of the RCU. (image 4-5) 2. Plug the other end i n the connector in the front panel of the projector labelled RC. Specifications of the RC input -U in =9 V -I max =8 0m A • Internal IR receivers can be disabled: o mono jack : on plug in o ...

  • Barco R9010300 - page 45

    4. Getting Sta rted F 1 F 2 F 3 F 4 F 5 A D J E X I T E N T E R P A U S E P H A S E T E X T S H A R P N T I N T C O L O R B R I G H T N C O N T R T R E B L E B A L A N C E B A S S V O L 9 0 7 8 5 6 3 4 1 2 45° 45 ° F 1 F 2 F 3 F 4 F 5 A D J E X I T E N T E R P A U S E P H A S E T E X T S H A R P N T I N T C O L O R B R I G H T N C O N T R T R E B ...

  • Barco R9010300 - page 46

    4. Getti ng Started Common address Default address. Projector will always execute the command coming from a RCU p rogrammed with that common address. Why a projector address ? As more than one projector can be installed in a room, the separ ate project or should be separately addressable with an RCU or computer . Therefo r each projector has its ow ...

  • Barco R9010300 - page 47

    4. Getting Sta rted Input Selection with alt ernative custom file (s lot extension) It is possible to select the same i nput but with another settings (another custom file wil l be loaded). H o wt od oi t: 1. Press first 0 on the RCU. The Slot extension menu will be displayed. 2. Enter the two digits. First digit is custom file sequence and the sec ...

  • Barco R9010300 - page 48

    4. Getti ng Started T o restart the image pro jection: •P r e s s P AUSE key 4.10 Quick lens adjustment Overview • Lens Adjustment via Control Buttons on Projector • Lens Adjustment via Menu Bar • Direct Lens Adjustment (RCU) 4.10.1 Lens Adjustment via Control Buttons on Projector How to enter the adjustment menu. 1. Press the control butto ...

  • Barco R9010300 - page 49

    4. Getting Sta rted 6. Press control button (D) to leave the lens adjustment menu. A2 D A A1 1 2 ...... Installation ...... Lens adjustment Projector address ...... Lens adjustment Use ↑ and ↓ for zoom Use ← and → for focus Press <enter> for SHIFT mode Press <LOGO> or <LENS> for test patter n Lens adjustment Use ↑ and ? ...

  • Barco R9010300 - page 50

    4. Getti ng Started How to zoom ? 1. Press ← or → on the Digi tal Zoom key on the remote control to zoom the center of the image. 2. Use the ↑ , ↓ , → or ← to pan the image. (image 4-15) 3. Press ENTER to confirm. Note: While in the digital zoom function, use BACK to retur n. A B C D Image 4- 15 Digital zoom A Normal image B Digital zoo ...

  • Barco R9010300 - page 51

    5. Getting used with the menu str ucture 5. GETTING USED WITH THE MENU STRUCTURE Overview • How to start up the menus • Using the menu • Using the Dialog boxes • Using the menus via the built-in LCD panel 5.1 Ho w to start up the menus PC like menu structu re The RLM H5 has a build in “PC like” menu bar which allows easy access to diffe ...

  • Barco R9010300 - page 52

    5. Getting used with the menu structure How to pull down a menu ? 1. Use ↓ to pull down a menu. How to pull down a submenu ? 1. Use → to pull down a submenu. How to exit the submenu ? 1. Press BACK to exit a submenu. Press MENU to e xit the menu 5.3 Using the Dialog boxes How to use the dia log boxes ? Some parameters are modified by means of a ...

  • Barco R9010300 - page 53

    5. Getting used with the menu str ucture In some cases an alphanu meric value (file name, ...) ha s to be entered. U se ↑ or ↓ to scrol l throu gh the char - acter values o nce the input field is activated. Following cha racters can be browsed in this particular order: Decimal scroll list: 0123456789 Signed decimal scroll list: 0123456789- ASCI ...

  • Barco R9010300 - page 54

    5. Getting used with the menu structure 50 R5976817 RL M H5 02/06/2006 ...

  • Barco R9010300 - page 55

    6. Source selecti on 6. SOURCE SELECTION Overview • Source Selection overview • The use of icons • Source selection • Selecting a data source on the 5-cable input • Composite Video • S-Video s electi on • The Video Selector 6.1 So urce Selection overview Source selection overvi ew •D a t a o n B N C ’ s • Component Video • RG( ...

  • Barco R9010300 - page 56

    6. Source select ion 3. Use ↑ or ↓ to select one of the dif ferent sources (Press → to pull down if the item has a submenu). 4. Press ENTER to confirm your choice. On the screen appears now the selected source with at the same time for a few seconds a te xt box with source information. (image 6-1) Video source 1 Video Video625.c06 Image 6-1 S ...

  • Barco R9010300 - page 57

    6. Source selecti on 6.5 Composite Video Possible connect ions In normal mode, one video source can be con nected to the video input. In extended mode, up to 7 different video sources can be connected to the normal video input, or to the extended 5-cable input or to the S-Video. When the extended mode is not switch ed on, the on screen menu will ha ...

  • Barco R9010300 - page 58

    6. Source select ion 2. Press ↓ to pull down the Source Selection menu. 3. Use ↑ or ↓ to select S-Video . 4. Press → to pull down the submenu. 5. Use ↑ or ↓ to select one of the di fferent S-V ideo inputs. (image 6-4) 6. Press ENTER to confirm your choice. A white bullet indicates the selected S-Video source. This source will be display ...

  • Barco R9010300 - page 59

    6. Source selecti on Image 6-5 How to select an input on the V ideo Select or 1. Use ← or → to browse through the different inputs. 2. Press ENTER to select. Use MENU or BACK to exit the Video Selector . Graphical interf ace B C D E A A B C D E Image 6-6 A BNC or S-Video connector on the video selector can be in one of following conditions: • ...

  • Barco R9010300 - page 60

    6. Source select ion 56 R5976817 RL M H5 02/06/2006 ...

  • Barco R9010300 - page 61

    7. General Menu 7. GENERAL M ENU Overview • General Menu overview • Pause • Freeze • Standby Timer • Identification 7.1 General Menu overview General M enu structu re • Pause • Freeze • Standby timer ... • Identification 7.2 Pause Interrupting the imag e projection With the Pause function, the image projection can be stopped, the ...

  • Barco R9010300 - page 62

    7. General Menu H o wt of r e e z et h ei m a g e? 1. Press MENU to activate the menu bar . 2. Press → to select General . 3. Press ↓ to pull down the General menu. 4. Use ↑ or ↓ to select Fr eeze . (image 7-2) 5. Press ENTER to activate the Freeze function. Image 7-2 The image can also be frozen using the FREEZE key o n the RCU. 7.4 Standb ...

  • Barco R9010300 - page 63

    7. General Menu Image 7-4 Image 7-5 7.5 Identification The projector’s id entification sc reen The identifi cation screen displays the projector ’ s main characteristics These are: •P r o j e c t o r t y pe • Projector address • Software version controller unit • RS232 Baudrate • Serial number of projector How to display th e identifi ...

  • Barco R9010300 - page 64

    7. General Menu Image 7-7 60 R5976817 RL M H5 02/06/2006 ...

  • Barco R9010300 - page 65

    8. Im age Menu 8. IMAGE MENU Overview • Image menu overview • Settings • Aspect ratio • Show native resolution • Keystone correction • Color T emperature • Color space • Filmmode detection •B l a n k i n g • Input Balance • AGC on Video • Manual Gain Control R5976817 RL M H5 02/06/2006 61 ...

  • Barco R9010300 - page 66

    8. Image Menu 8.1 Image menu overview Overview • Settings - Contrast - Brightness -C o l o r -T i n t - Sharpness - Gamma -P h a s e - Noise Reduction • Aspect ratio -A u t o - [4:3] - [16:9] - [5:4] - [2.35] - [2.88] - [1.78] -C u s t o m • Show native resolution -O n -O f f • Keystone... • Color temperature - Projector white - Computer ...

  • Barco R9010300 - page 67

    8. Im age Menu 8.2 Settings Overview • Contrast • Brightness • Color • T int (hue) • Sharpness • Gamma • Phase • Noise reduction What can be done? Correct image settings are impor tant for a good image reproduction. The image settings are made through a dialog box with a scroll bar . Minimal, maximal and the actual values are indica ...

  • Barco R9010300 - page 68

    8. Image Menu 8. Use ← or → to change the contrast. The higher the value, the higher the c ontrast. Or , click in the input box and enter the desired value with the numeric keys. Image 8-3 8.2.2 Brightne ss About Brightnes s The Brightness function is used to adjust the overall light output. How to change the Bri ghtness ? 1. Press MENU to acti ...

  • Barco R9010300 - page 69

    8. Im age Menu 8.2.3 Color About Color set ting The color function is used to adjust color saturation levels. How to change t he Color ? 1. Press MENU to activate the menu bar . (image 8-5) 2. Press → to select the Image item. 3. Press ↓ to pull down the Image menu. 4. Use ↑ or ↓ to select settings . 5. Press → to pull down the menu. 6. U ...

  • Barco R9010300 - page 70

    8. Image Menu Image 8-6 8.2.5 Sharpness About Sharpness The sharpness function is used to adjust the image sharpness of video signals. How to change the sha rpness ? 1. Press MENU to activate the menu bar . (image 8-7) 2. Press → to select the Image item. 3. Press ↓ to pull down the Image menu. 4. Use ↑ or ↓ to select settings . 5. Press ? ...

  • Barco R9010300 - page 71

    8. Im age Menu 8.2.6 Gamma About Gamma Gamma is an image quality enhancement function that offers a riche r image by brightening the already darker portions of the image without altering the brightness of the brighter portions (contrast feeli ng enhanced). How to change the Gamma 1. Press MENU to activate the menu bar . (image 8-8) 2. Press → to ...

  • Barco R9010300 - page 72

    8. Image Menu How to change the Phase ? 1. Press MENU to activate the menu bar . (image 8-10) 2. Press → to select the Image item. 3. Press ↓ to pull down the Image menu. 4. Use ↑ or ↓ to select settings . 5. Press → to pull down the menu. 6. Use ↓ or ↑ to select Phase . 7. Press ENTER . A slider box appears. 8. Use ← or → to chan ...

  • Barco R9010300 - page 73

    8. Im age Menu Image 8-1 1 8.3 Aspect ratio Aspect ratio is greyed ou t when the Full Screen Representation function i n Display Setup is switch ed ON or when the Show Native Resolution function in Image is switched ON. What can be done ? The aspect ratio setting forces the projector to project an image using a defined aspect ratio Aspect ratio Des ...

  • Barco R9010300 - page 74

    8. Image Menu Image 8 -12 Differe nt views for some typical in put signals (1) Standard television signal with 4:3 image information (2) Standard television signal with 16:9 image information How to change th e Aspect rati o ? 1. Press MENU to activate the menu bar . (image 8-13) 2. Press → to select Image . 3. Press ↓ to pull down the Image me ...

  • Barco R9010300 - page 75

    8. Im age Menu Image 8- 13 How to set up a custom Aspect rat io ? 1. Press MENU to activate the menu bar . (image 8-14) 2. Press → to select Image . 3. Press ↓ to pull down the Image menu. 4. Use ↑ or ↓ to select Aspect ratio . 5. Press ↓ to select custom... . 6. Press ENTER to confirm. The Custom aspect ratio dialog box will be displayed ...

  • Barco R9010300 - page 76

    8. Image Menu Show native resolutio n is greyed out for video signals. DMD Digital Micromirror Device What can be done The aim here is to always show the r esolution of the source independently of the resolution of the DMD panels. Image 8- 15 When the show native resolution function is in the ON position, the projector handles the source as follows ...

  • Barco R9010300 - page 77

    8. Im age Menu A white bullet shows the selection. Image 8- 16 When Show Native Resolution is in the O N position, sc rolling of the im age is possible w ith the arrow keys on the remote c ontrol. 8.5 Keystone correction What can be done ? The Keystone adjustment is used to align the image, this can b e necessary when pro jecting under a non standa ...

  • Barco R9010300 - page 78

    8. Image Menu Image 8-18 Keystone Top Bottom 255 0 255 0 0 Image 8-19 8.6 Color T emperature What c a nb ed o n e? The color temperature can be selecte d according to the type of source: There are 6 different preset color temperatures: •P r o j ector white • computer : 9300 K • Video : 6500 K • Film : 5400 K • Broadcast : 3200 K • Custo ...

  • Barco R9010300 - page 79

    8. Im age Menu 5. Press → to pull down the menu. 6. Use ↓ or ↑ to select the desired preset color temperature. 7. Press ENTER to confirm. The color temperature of the image is adapted and a white bullet shows the active setting in the menu bar . Image 8- 20 How to store a customer creat ed color temperat ure on Custom Preset? 1. Press MENU to ...

  • Barco R9010300 - page 80

    8. Image Menu the x and y coordinate change s between 0.00 and 1.00. For practical reason s, the values on the slider box are multiplied by 1000. How to sta rt up the cust om color te mperature ? 1. Press MENU to activate the menu bar . 2. Press → to select the Image item. (image 8-24) 3. Press ↓ to pull down the Image menu. 4. Use ↑ or ↓ t ...

  • Barco R9010300 - page 81

    8. Im age Menu maximum color space which can be displayed is the projector color space. This color space is measured at the factory and stored inside the projector . Difference between Custom Preset and Custom? The Custom Preset color space can b e created in the same way a s a c ustom color space but the values are stored for later re call. When a ...

  • Barco R9010300 - page 82

    8. Image Menu A slide box for Red x-coordinate will be displayed as we ll as a wizard text box in the lower part of the screen. (image 8-29) Adjust first Red x to the desired value. Use COLOR t o switch to the next adjustment. The adjustment order is Red x → Red y → Green x → Green y → Blue x → Blue y . The created color space is save as ...

  • Barco R9010300 - page 83

    8. Im age Menu Image 8-30 Red x 200 0 1000 Image 8-31 the x and y coordinate change s between 0.00 and 1.00. For practical reason s, the values on the slider box are multiplied by 1000. 8.8 Filmmode detection What can be done ? Some sources like common DVD material are derived from cinema 24 Hz sources ( 2/2 or 3/2 pull down method). The filmmode d ...

  • Barco R9010300 - page 84

    8. Image Menu Enabling/disabl ing the fil mmode detection 1. Press MENU to activate the menu bar . 2. Press → to select the Image item. (image 8-32) 3. Press ↓ to pull down the Image menu. 4. Use ↑ or ↓ to select Filmmode detection. 5. Press → to pull down the menu. 6. Use ↓ or ↑ to enable or disable the Filmmode detection. 7. Press E ...

  • Barco R9010300 - page 85

    8. Im age Menu Image 8- 33 Blanking A T op blanking B Bottom blanking C Left blanking D Right blanking Adjusting t he blankin g 1. Press MENU to activate the menu bar . 2. Press → to select the Image item. (image 8-34) 3. Press ↓ to pull down the Image menu. 4. Use ↑ or ↓ to sele ct Blanking . 5. Press ENTER to confirm. The Blanking pop-up ...

  • Barco R9010300 - page 86

    8. Image Menu Image 8-34 Image 8-35 Image 8-36 8.10 Input Balance Overview • Introduction to Input Balan ce • Adjusting the input balance • Input balance for YPrPb signals 8.10.1 Introduction t o Input Balance Introduction: Unbalanced color signals When transporting signals, there is always a risk of dete rioration of the information containe ...

  • Barco R9010300 - page 87

    8. Im age Menu B Black level 0.7V Image 8-37 Black level ∆ G ∆Β ∆ R R G B Image 8-38 One can concl ude he re that a good color tracking can only be met by using three previou sly (input) balanced color signals Analog Digital Conve rsion The analog co lor signals must pass through an Analog/Digital conversion circuit prior to any digital proc ...

  • Barco R9010300 - page 88

    8. Image Menu 8.10.2 Adjusting the i nput balance How can it be done ? T o balance the three color signals of a particular source there are conditions; in fact we must know the black and the white level of the source i.e. : 1. The source in question must be able to generate a white signal, ideally a 100% white (background) full screen pattern 2. Th ...

  • Barco R9010300 - page 89

    8. Im age Menu 1 1. Adjust the Red black level until bright spots appear on the screen. The projected image should now be noisy full black Image 8-42 Input black balance Red 20 0 127 Image 8-43 Change color between Red Green and Blue with <COLOR> Image 8-44 If one us es a gray scale pattern, the bright spots should ap pear in the black bar . ...

  • Barco R9010300 - page 90

    8. Image Menu Image 8-45 Input white balance Red 50 0 127 Image 8-46 If one uses a gray scale pattern, the brigh t spots should appear in the white bar. Selecting Preset restores t he factor y input bal ance sett ing 8.10.3 Input balance for YPrPb si gnals Remark on the input balance of a component video source Before starting the Inp ut Balance pr ...

  • Barco R9010300 - page 91

    8. Im age Menu • The white balance happens only on Green. Adjust until bright spots appear in the image. Image 8-47 • The black balance happens on the three colors. The PR and PB connector have to be removed from the input. Adjust until noise appears in the image. Image 8-48 8.1 1 AGC on Video AGC Automatic Gain Control: allows an automatic amp ...

  • Barco R9010300 - page 92

    8. Image Menu Image 8- 49 The AGC can be disturbing in cas e of Macrovision encoded signals, therefore the AG C can be disabled (OFF) at any time 8.12 Manual Gain Control What can be done ? When AGC on Video is disabled, the gain of the incoming video signal can be set manually . The manual gain control must be done on an external pattern with whit ...

  • Barco R9010300 - page 93

    8. Im age Menu Image 8-51 R5976817 RL M H5 02/06/2006 89 ...

  • Barco R9010300 - page 94

    8. Image Menu 90 R5976817 RL M H5 02/06/2006 ...

  • Barco R9010300 - page 95

    9. Tools M enu 9. T OOLS MENU Overview • Overview of the T o ols menu • Introduction to PiP • PiP se lect • PiP add window • PiP remove window • PiP layo ut •P i P A d j u s t 9.1 Ov erview of the T ools menu Overview • PiP se lect - Full-screen -2 b y 2 r a s t e r - PiP layout 1 - PiP layout 2 - PiP layout 3 • PiP add window ... ...

  • Barco R9010300 - page 96

    9. Tools Menu The different PiP configurat ions • Full screen 2 The full screen is used to display one of the selected sources. Browse through the sources with the PiP Adjust button on the remote control. •2 - b y - 2 r a s t e r 2 The screen is divided into 4 subscreens cont aining 1 Video, 2 Data sources and 1 SDI source. Image 9-1 • P i Pl ...

  • Barco R9010300 - page 97

    9. Tools M enu PiP dedicated buttons • PiP Adjust : this button allows to focus on one particular window, this window is shown with a white frame surrounding the selected window . A source identification box is displayed in the right lower corner . Image 9-2 Press PiP Adjust button to move the frame to the next window . This can also be done via ...

  • Barco R9010300 - page 98

    9. Tools Menu Image 9-3 9.4 PiP add window What can be done ? It is possible to add a window to the existing windows (maximum 4), therefore a source must be sel ected. Sources which are already used are not selectable. If for instance the PiP layout contains a component video then component video will be not selectable. Once added, the window may b ...

  • Barco R9010300 - page 99

    9. Tools M enu 9. Change the viewing order of the displayed images (z-order) with the ↑ and ↓ . (image 9-10) Image 9-5 Source selection Data on BNC's Video selector SDI DVI PC Image 9-6 Pip Wizard step 1 : Select the source you want to display in the w indow... Image 9-7 Pip Wizard step 2 : Resize this new window w ith ↑↓ ←→ Image ...

  • Barco R9010300 - page 100

    9. Tools Menu Image 9-1 1 Select window with <PiP ADJUST> → Press <ENTER> to rem ove Image 9-12 9.6 PiP layout Overview •P i P S a v e • PiP rename layout • PiP de lete layou t 9.6.1 PiP Save What can be done ? The active layout can be saved or "saved as". When a new layout is saved it is added to the PiP select menu. ...

  • Barco R9010300 - page 101

    9. Tools M enu Image 9-13 Save PiP layout Layout name: Full-screen Image 9-14 Message Current layout has been saved Press <ENTER> or <EXIT> to return Image 9-15 9.6.2 PiP rename layo ut What can be done ? T h en o nf i x e dl a y outs (factory and personal layouts) can be renamed . The maximal length of the name is 12 characters. A fixe ...

  • Barco R9010300 - page 102

    9. Tools Menu Rename PiP layout PIP Layout 1 PIP Layout 2 PiP Layout 3 Own layout 1 Own layout 2 Image 9-17 Rename PiP layout New name: Own layout 1 Image 9-18 9.6.3 PiP delete layout What can be done ? The non fixed layouts (factory and personal layouts) can b e deleted. The fixed layouts and the active layout can not be deleted How to delete a la ...

  • Barco R9010300 - page 103

    9. Tools M enu This can also be d one by using the de dicated PiP Adjust key on the RCU Image 9- 20 PiP adjust i n case of 2-by- 2 layout A Data1 window has the focus, new settings will only affect Data1 window B Video1 window has the focus, new settings will only affect Video1 window PiP adjust 1. Press MENU to activate the menu bar . 2. Press → ...

  • Barco R9010300 - page 104

    9. Tools Menu 100 R5976817 RL M H5 02/06/2006 ...

  • Barco R9010300 - page 105

    10. Signal menu 10. SIGNAL MENU Overview • Overview of the Signal menu • Switching mode • Output Frame rate • Background 10.1 Overview of the Signal menu Overview • Switching mode -S e a m l e s s -B o x i n - Box out - Shift in left - Shift in right - Shift in top - Shift in bottom - V ertical curtain open - V ertical curtain close - Hor ...

  • Barco R9010300 - page 106

    10. Signal menu Image 10-1 The Random mode will select a new sw itching mode at each sou rce switching i.e. there will ne ver be 2 suc- cessive source sw itchings with the sa me effect. The Seamless switching m ode is not used in the Random mode. Note on Fade in/out In some cases, depending on the sources to be switched, the fad e in/out effect is ...

  • Barco R9010300 - page 107

    10. Signal menu Image 10-2 * Video may be Composite video/ S-Video / SDI • dark arrow : fade in/out effect possible • dotted arrow : u ndetermined case, fade in/out effect may take place or not • striked out arrow : fade effect impossible The switching effects are o nly possible in the full screen mod e 10.3 Output Frame rate What can be done ...

  • Barco R9010300 - page 108

    10. Signal menu 4. Use ↑ or ↓ to select Output frame rate. 5. Press → to pull down the menu. 6. Use ↑ or ↓ to select the desired frame rate. The following choices are possible: - synchronous : the output follows the input frame rate. - 50 Hz : output is always displayed with a frame rate of 50 Hz - 60 Hz : output is always displayed with ...

  • Barco R9010300 - page 109

    11. Lam ps Men u 1 1. LAMPS MENU Overview • Overview of the Lamps m enu • Runtimes • Mode • Economic ON/OFF • Runtime warning 1 1.1 Overview of the Lamps menu Overview • Runtimes... • Mode - Single... - Dual... • Economic • Runtime warning 11 . 2 R u n t i m e s How to display the lamp runti mes ? 1. Press MENU to activate the men ...

  • Barco R9010300 - page 110

    11. Lamps Menu 1 1.3 Mode Single lamp mode The projector will always switch to the lamp with the shortest r untime when the difference between the runtimes of lamp 1 and lamp 2 reaches 100 hours , switching from one lamp to another happe ns only at switching on of the projector and not during operation. When the lamp fails or reaches its maximum r ...

  • Barco R9010300 - page 111

    11. Lam ps Men u Image 1 1-4 When switching from th e dual mode to the single mode the lamp with the longest runtim e is switched off. If the runtimes are equal (if the projecto r has always been operated in dual mode) the n lamp 1 is switched out. When switching to singl e mode, returning to the dual mode will no t be possible in the first 60 seco ...

  • Barco R9010300 - page 112

    11. Lamps Menu 4. Use ↑ or ↓ to sele ct Runtime warning. 5. Press ENTER to confirm. A dialog box is displayed. (image 1 1-7) 6. Press ENTER to activate the input field. 7. Use ← or → to change the runtime warning setting. Or , enter the desired value with the digit keys on the remote control. 8. Press Back to return. Image 1 1-6 Lamp runtim ...

  • Barco R9010300 - page 113

    12. Image File s Menu 12. IMAGE FILES MENU Overview • Overview of the Image Files Menu • Introduction to image files • Load file • File selection • Auto Image • Edit file • Rename file • Copy • Delete • Automatic load • Zoom-Focus 12.1 Overview of the Image Files Menu Overview • Load • File selection -F i t -A l l • Auto ...

  • Barco R9010300 - page 114

    12. Image File s Menu Possible file mani pulations The possible file manipulations are : • Load : insta llation of a file for a new source • Edit : editing a loaded file to match the source specifications • Rename : renaming a file • C o p y: c o p y i n gaf i l et oan e wf i l e • Delete : deleting an existing file 12.3 Load f ile H o wt ...

  • Barco R9010300 - page 115

    12. Image File s Menu What to do if the image is not pe rfect ? If the displayed image is not correct after AutoImage or after selecti ng the best fitting file, go to the Edit menu, select the active file and change the settings. 12.4 File sele ction How to se t the filte r ? 1. Press MENU to activate the menu bar . 2. Press → to select the Image ...

  • Barco R9010300 - page 116

    12. Image File s Menu Image 12-4 The Auto Image s etup in the Display setup menu affect only Auto Image if it is launched via th e RCU key or at automatic file creation. Launching Au toImage via the menu involves complete c hecking of all parameters. Auto Image can a lso be launched via the R CU with the dedica ted AutoImage key . 12.6 Ed it file O ...

  • Barco R9010300 - page 117

    12. Image File s Menu Image 12-5 Edit custom file Video625.c01 Video625.c02 Active files: Video625.c01 Image 12-6 Edit custom file Name Horizontal: Vertical: 680 20 0 560 8 576 720 Advanced Video625.c01 total active start period total active start Image 12-7 It is recommended to use the d efault values. 12.6.2 Correct fi le parameters What is alrea ...

  • Barco R9010300 - page 118

    12. Image File s Menu Advanced edit Comb filter On Off AGC hold interval Short Long Sync locking Slow Fast Sharpness Coarse Fine Image 12-8 video signal video signal frame blanking HI egalisation Image 12-9 HI AGC Hold interval The Comb filter is by default enabled. The AGC hold interval is t he time interval in which the AGC is inhibited (AGC hold ...

  • Barco R9010300 - page 119

    12. Image File s Menu • a progressive signal (32 kHz frequency video signal ) is connected to the BNC’ s (select the source with Data on BNC’s in the Source selection menu). • one wants (in PiP mode) to visualize the comp onent video signal in a Data window hereby adding a video image in the PiP layout. -HDTV-PR/Y/PB for high definition com ...

  • Barco R9010300 - page 120

    12. Image File s Menu 12.8 Copy How to copy a file ? 1. Press MENU to activate the menu bar . 2. Press → to select the Image files item. (image 12-15) 3. Press ↓ to pull down the Image files menu. 4. Use ↑ or ↓ to select copy . 5. Press ENTER to confirm. A dialog box is displayed. (image 1 2-16) 6. Use ↑ or ↓ to select the desired file. ...

  • Barco R9010300 - page 121

    12. Image File s Menu How to delete a fi le ? 1. Press MENU to activate the menu bar . 2. Press → to select the Image files item. (image 12-18) 3. Press ↓ to pull down the Image files menu. 4. Use ↑ or ↓ to select delete. 5. Press ENTER to confirm. A dialog box is displayed. (image 1 2-19) 6. Use ↑ or ↓ to select the desired file. 7. Pr ...

  • Barco R9010300 - page 122

    12. Image File s Menu On The projector will switch the file when the source settings ch ange. Off The projector stays on its active file even w hen the settings of the source change. Image 12-20 12.1 1 Zoom-Focus The Zoom-Fo cus setting is only valid wh en the projector is equip ped with TLD lenses . What can be done ? When TLD lenses are used, it ...

  • Barco R9010300 - page 123

    13. Display Se tup 13. DISPLA Y SETUP Overview • Startup screen •T e x t B o x • Menu bar position • Status bar position • Sliderbox position • Auto Image Setup • Scenergix 13.1 Startup screen What can be done ? When the startup scre en is enabled, the identification screen is displayed for a few seconds at startup. This startup scree ...

  • Barco R9010300 - page 124

    13. Display Setup 3. Press ↓ to pull down the Display setup menu. 4. Use ↑ or ↓ to select T extbox . 5. Press → to pull down the menu. 6. Use ↓ or ↑ to enable/disable the textbox. 7. Press ENTER . Image 13-2 T o enable the menus and dial og boxes again, press the TEXT button on th e RCU. 13.3 Menu bar position What can be done ? The men ...

  • Barco R9010300 - page 125

    13. Display Se tup Image 13-4 13.4 Status ba r position What can be done ? The status bar (wizard menu) can be centere d vertically . The rang e is from the bottom of the screen to the middle of the screen. Image 13-5 Status bar positio n This is useful in applications where the bottom image content is not displayed (e.g. due to blanking). How to c ...

  • Barco R9010300 - page 126

    13. Display Setup 13.5 Sliderbox position What can be done ? The sliderbox can be displayed anywhere on the screen. The exact location can be set in sliderbox menu due to the coarse and fine adj ustment. How to reposit ion the slider box? 1. Press MENU to activate the menu bar . 2. Press → to select the Displ ay set up item. (image 13-7) 3. Press ...

  • Barco R9010300 - page 127

    13. Display Se tup How to set up Auto Image? 1. Press MENU to activate the menu bar . 2. Press → to select the Displ ay set up item. (image 13-9) 3. Press ↓ to pull down the Display setup menu. 4. Use ↑ or ↓ to select Auto Image setup . 5. Press ENTER to confirm. A dialog box is displayed. (image 1 3-10) 6. Use the arrow keys to select the ...

  • Barco R9010300 - page 128

    13. Display Setup 13.7 Scenergix Overview • Introduction • Preparations • ScenergiX overlap zone (horizontal scenergix) • ScenergiX overlap zone (vertical sce nergix) • ScenergiX border adjustment • Black level of the images 13.7.1 Introduct ion Why Sce nergiX ? When working in a multichannel setup th e RLM H5 and its Soft Edge po ssibi ...

  • Barco R9010300 - page 129

    13. Display Se tup 13.7.3 ScenergiX overlap zone (horizont al scenergix) Definiti ons Image 13-14 Scenergix set up Overlap : number of pixels that overlap Horizontal resolution of 1 projector : 1024 for Graphics versions, 12 80 for Reality versions, 1400 for SXGA p rojectors. T otal horizontal screen resolution : [ (horizont al resolution of 1 proj ...

  • Barco R9010300 - page 130

    13. Display Setup 13.7.4 ScenergiX overlap zone (ve rtical scenergi x) Definiti ons Image 13-15 Scenergix overl ap zone vertical Overlap : number of pixels that overlap V ertical resolution of 1 projector : 768 for Gra phics versions, 1024 for Reality versions, 1050 for SXG A projectors. T otal vertical screen resolution : [ (V ertical resolution o ...

  • Barco R9010300 - page 131

    13. Display Se tup 3. Press ↓ to pull down the Display setup menu. 4. Use ↑ or ↓ to select ScenergiX . 5. Press → to select the ScenergiX item. 6. Use ↑ or ↓ to select Border . 7. Press ENTER to select. A dialog box will be displayed. The actual scenergix border will be displayed. 8. Use ↑ or ↓ to select the desired adjustment. Imag ...

  • Barco R9010300 - page 132

    13. Display Setup Image 13- 18 Width set up for projector 1 Image 13- 19 Width set up for projector 2 Adjusting by ent ering the exact va lues. 1. When on an adjustable item, the input box background will be colored. Press ENTER . The value will change to a 3 digit value and the first digit is selected. 2. Enter a value with the digit keys on the r ...

  • Barco R9010300 - page 133

    13. Display Se tup 2. Press → to select t he Display setup item. (image 13-20) 3. Press ↓ to pull down the Display setup menu. 4. Use ↑ or ↓ to select ScenergiX . 5. Press → to select the ScenergiX item. 6. Use ↑ or ↓ to select Black level . 7. Press ENTER to select. A dialog box will be displayed on a black level background. Adjust t ...

  • Barco R9010300 - page 134

    13. Display Setup 130 R5976817 RL M H5 02/06/2006 ...

  • Barco R9010300 - page 135

    14. Instal lation menu 14. INST ALLA TION MENU Overview • Lens adjustments • Projector address • Orientation • Language • Quick access keys • RS baudrate • RS mode • Automatic startup • Security 14.1 Lens adjustments What can be done ? Motorized lenses can be adjusted in the installation menu or via t he dedicated keys on the remo ...

  • Barco R9010300 - page 136

    14. Installation menu Image 14-1 Lens adjustment Use ↑ and ↓ for zoom Use ← and → for focus Press <enter> for SHIFT mode Press <LOGO> or <LENS> for test pattern Image 14-2 Lens adjustment Use ↑ and ↓ for vertical shift Use ← and → for horizontal shift Press <enter> for ZOOM/FOCUS Press <LOGO> or <LEN ...

  • Barco R9010300 - page 137

    14. Instal lation menu Image 14-4 Image 14-5 Image 14-6 How to change the common address ? 1. Press MENU to activate the menu bar . 2. Press → to select the Installation . (image 14-7) 3. Press ↓ to pull down the Installation menu 4. Use ↑ or ↓ to select Projector address 5. Press ENTER A dialog box appears on the screen. Use the ↑ to scr ...

  • Barco R9010300 - page 138

    14. Installation menu 14.3 Orientation Projector orientat ions Depending on how the projector is oriented, the projector ’s inter nal settings have to be adapted. See also Chapter “Installation”, “Orientation” . How to change the orien tation ? 1. Press MENU to activate the menu bar . 2. Press → to select the Installation item. (image 1 ...

  • Barco R9010300 - page 139

    14. Instal lation menu Image 14-1 1 14.5 Quick access keys What can be done ? The 3 function keys on top of the RCU (F 1, F2 and F3) can be associated with a particular item in one of the me nus. Each function which is not password protected c an be associated to a function key . How to get an overview of the quick access key s ? 1. Press MENU to a ...

  • Barco R9010300 - page 140

    14. Installation menu 2. Push the desired function key for 3 seconds. The menu item is stored behind the quick access key . Th e message Q uick Access key stored will be displayed. 14.6 RS baud rate How to change the RS baudrate? 1. Press MENU to activate the menu bar . 2. Press → to select the Installation item. (image 14-14) 3. Press ↓ to pul ...

  • Barco R9010300 - page 141

    14. Instal lation menu Image 14-15 14.8 Automatic startup What can be done ? The automatic startup allows immediate restart of the projector after a power failure (breakdown), i.e. without passing through the standby state. The projector restarts at power r esume and recovers the previous settings (previous s ource,...). This function can be disabl ...

  • Barco R9010300 - page 142

    14. Installation menu 14.9 Security What can be done ? A security function is implemented in the projector that allows a protection against theft. A PIN code allows the user to lock the projector in case of wrong code entry . The PIN code must be en tered at each start up (Power ON), enteri ng th ree times a wrong number triggers a wait cycle of 15 ...

  • Barco R9010300 - page 143

    14. Instal lation menu Security Activating the security mode involves the following things: - The startup screen (identification window ) will contain a line w iththe name of the owner in it. - You w ill be asked to enter a PIN code every time the projector lost its pow er. Are you sure you w ant to activate the "Security mode" YES NO Ima ...

  • Barco R9010300 - page 144

    14. Installation menu 140 R5976817 RL M H5 02/06/2006 ...

  • Barco R9010300 - page 145

    15. Service 15. SER VICE Overview • V ersion T able • Lamps and Power supp ly • Board Identification • Diagnostics • Formatter firmware • Formatter reset 15.1 V ersion T able What is possible ? T o get an overview of the different software and firmware version inside the projector . How to get t he version t able 1. Press MENU to activa ...

  • Barco R9010300 - page 146

    15. Service How to get the l amps and power suppl y overvi ew ? 1. Press MENU to activate the menu bar . (image 15-3) 2. Press → to select the Service item . 3. Press ↓ to pull down the menu. 4. Use ↑ or ↓ to select Lamps and Power supply ... . 5. Press ENTER . An list dialog box opens. (image 15-4) Image 15-3 Image 15-4 15.3 Board Identifi ...

  • Barco R9010300 - page 147

    15. Service Image 15-5 Image 15-6 15.4 Diagnostics Overview • I²C Diagnostics • Lamps and power su pply 15 .4.1 I² C Diagnosti cs Wh at can be done ? The I 2 C bus allows the diagnostic of different hardware components How to display t he diagnostics menu ? 1. Press MENU to activate the menu bar . 2. Press → to select the Servi ce item. (im ...

  • Barco R9010300 - page 148

    15. Service Image 15-7 I2C Diagnostics Device Slave address Lamp driver I2C Diagnostics 0x78 Lamp Eeprom 0xA0 Power Supply 0x30 I2C Mulitplexer 0xE0 Red Formatter 0x34 Green Formatter 0x36 Blue Formatter 0x38 Motor driver 0x1A Image 15-8 15.4.2 Lamps and power supply What can be done ? This menu item gives an overview of the lamp and power supply e ...

  • Barco R9010300 - page 149

    15. Service Image 15-10 15.5 Formatter firmware How to di spla y ? 1. Press MENU to activate the menu bar . (image 15-1 1) 2. Press → to select the Service item . 3. Press ↓ to pull down the menu. 4. Use ↑ or ↓ to select Formatter firmware... . 5. Press ENTER . An options dialog box opens. (image 15-12) Image 15-1 1 Image 15-12 15.6 Formatt ...

  • Barco R9010300 - page 150

    15. Service How to di spla y ? 1. Press MENU to activate the menu bar . (image 15-13) 2. Press → to select the Service item . 3. Press ↓ to pull down the menu. 4. Use ↑ or ↓ to select Formatter reset... . 5. Press ENTER . An confirmation dialog box opens. (image 15-14) Image 15- 13 Image 15-14 146 R5976817 RL M H5 02/06/2006 ...

  • Barco R9010300 - page 151

    16. Adjustment menu (check up) 16. ADJUSTMENT MENU (CHECK UP) Overview • Internal patterns • Convergence •M o r e . . All items in the adjus tment menu are given f or check up. No ad justments are pos sible. 16.1 Internal patterns How to s elect ? 1. Press MENU to activate the menu bar . 2. Press → to select the Adjustment item. (image 16-1 ...

  • Barco R9010300 - page 152

    16. Adjustment menu (check up) 16.2 Convergence Only for check up of the c onvergence, no adjustm ent is possible in the field. When a co nvergence problem occurred, contact a Barco service center. How to s elect ? 1. Press MENU to activate the menu bar . 2. Press → to select the Adjustment item. (image 16-2) 3. Press ↓ to pull down the Adjustm ...

  • Barco R9010300 - page 153

    A. Standard Ima ge Files A. ST ANDARD IMAGE FILES A.1 T able overvi ew T able overvi ew The following standard image files are pre-programmed in the projector . Name 4 Fvert Hz 5 FHor kHz 6 Fpix MHz 7 Ptot 8 Pact 9 Ltot 10 La ct 11 Video625 25,00 15,625 11 , 2 5 720 680 625 560 Video525 29,97 15,734 11 , 3 3 720 680 525 472 SDI_625 25,00 15,625 13, ...

  • Barco R9010300 - page 154

    A. Standard Ima ge Files Name 4 Fvert Hz 5 FHor kHz 6 Fpix MHz 7 Ptot 8 Pact 9 Ltot 10 La ct 11 1280x768RB@60 59,994 47,396 68,250 1440 1280 790 768 1280x960@85 85,005 85,940 128,505 1728 1280 101 1 96 0 1280x1024@60 60,018 63,980 107,997 1688 1280 1066 1024 1280x1024@75 75,023 79,974 134,997 1688 1280 1066 1024 1280x1024@85 85,027 91,149 157,506 1 ...

  • Barco R9010300 - page 155

    B. Maintenance of t he Projector B. MAINTENANCE OF THE PROJECT OR B.1 Air Filters About m aintain ing the air f ilters It is recommended that you replace the a ir filters (located at the bottom of the projector) when you replace the lamp - or sooner, in dusty or dirty environment. I n the latter case, check monthly if replacement is required. A clo ...

  • Barco R9010300 - page 156

    B. Maintenance of the Projector A B Image B-2 C Image B-3 A vailabl e kit All the 5 air filters are assembled to 1 kit, order number R401045K 152 R5976817 RL M H5 02/06/2006 ...

  • Barco R9010300 - page 157

    C. Specifications C. SPECIFICA TIONS C.1 RLM H5 specifications Overview Light Out put 4500 ANSI Lumen Resolution 1280 x 720 (native) Contrast ratio 1000 : 1 (full field) Brightness uniformity > 90% Lamp 2 x 250 W mercury max. lifetime: 1500 hrs typ. lifetime: 1000 hrs min. lifetime: 750 hrs Noise level (@ 20°C - 68°F) 42 dBa Ambient t emperat ...

  • Barco R9010300 - page 158

    C. Specifications Control • 1 x RS-232 / 422 IN • 1 x RS-232 / 422 OUT • 1 x XLR female (2 way) • build-in RF remote transceiver (optional) Shift Range Lens Shift R ange RLD 0.8 up-down: 35<>35 left-right: 15<>15 Other RLD up-down: 130<>40 left-right: 50<>50 TLD (HB) 0.8 up-down: 90<>50 left-right: 40<>40 ...

  • Barco R9010300 - page 159

    Gloss ary GLOSSAR Y 2:2 pull-down The process of transferring 24-frames/sec film format into video by repeating each frame (used for P AL DVD’s) as t wo video fields. (A D) 3:2 pull-down Method used to map the 24 fps of film onto the 30 fps (60 fields) o r 25 fps (50 fields), so that one film frame occupies thre e video fields, the next two, etc. ...

  • Barco R9010300 - page 160

    Gloss ary PiP PiP stands for "Picture in Picture" and allows to display multiple windows containing each of them an image. The windows ma y be of the video or data type. Projector address Address installed in the projector to be individually controlled. SDI Serial Digital Interface Vide o Se lec to r The Video Selector is a graphical inte ...

  • Barco R9010300 - page 161

    Index INDEX A Address 41–42, 132 Program 42 RCU 42 Projector address 132 setting 41 Adjustment 44–45 Lens 44–45 Remote Control 45 Via Menu Bar 44 With Control buttons 44 Adjustments 131 Lens 131 AGC 87 AGC on Vid eo 87 Air filters 151 Aspect ratio 69 Auto Image 1 1 1, 122 Setup 122 Automatic load 1 17 B Background 103–104 Brightness 64 C Cl ...

  • Barco R9010300 - page 162

    Index Input source connection 23, 25–27, 29 5-Cable input 23 Composite Video input 25 Computer input 29 DVI 27 HDSDI 29 RGB analog 29 S-Video input 26 SDI 29 Input balance 82, 84–86 Adjust 84 Black balance 84 Introduction 82 White balance 85 YPrPb sigals 86 Input source connections 32–34 Extended configuration 32–34 5-cable 32 Introduction ...

  • Barco R9010300 - page 163

    Index Composite video 53 How 51 Overview 51 S-Video 53 Use of icons 51 Video selector 54 Start up 47 T ools menu 91, 93–98 Overview 91 PiP 91 PiP add window 94 PiP Adjust 98 PiP delete layout 98 PiP layout 96 PiP remove window 95 PiP rename layout 97 PiP Save 96 PiP select 93 Using the dialog boxes 48 Using the menu 47 Via LCD panel 49 Menu bar p ...

  • Barco R9010300 - page 164

    Index Switching 101 Switching mode 101 Switching off 39 Switching to standby 38 T T emperature 1 1 Ambient 1 1 Te x t B o x 11 9 T int 65 T ools menu 91, 93 Overview 91 PiP 91 Introduction 91 PiP select 93 V Video 25–26 Composite Video 25 S-Vi deo 26 Z Zoom-Focus setting 1 18 160 R5976817 RL M H5 02/06/2006 ...

  • Barco R9010300 - page 165

    Revision Sheet To : Barco nv Even ts/Documenta tion Noordlaan 5, B-8520 Kuurne Phone: +32 56.36.8 9.70, Fax: +32 56.36.88.24 E-mail: service.media_and_entertainmen t.emea@barco.com, Web: ww w .barco.com From: Date: Please correct the following points in this documentation ( R5976817/03 ): page wrong correct R5976817 RLM H5 02/06/2006 ...

Fabricant Barco Catégorie Home Theater System

Les documents que nous recevons du fabricant de l'appareilBarco R9010300 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Barco
- manuels d’utilisations R9010300
- fiches produit Barco
- dépliants
- ou étiquettes-énergie Barco R9010300
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Barco R9010300.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Barco R9010300, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Barco R9010300. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Barco R9010300.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Barco R9010300, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Barco R9010300 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Barco R9010300.

Le manuel d’utilisation complet Barco, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Barco R9010300 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Barco R9010300, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lBarco R9010300 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Barco R9010300 - qui devraient nous aider dans les premières étapes lors de l'utilisation Barco R9010300
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Barco R9010300
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Barco R9010300 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Barco R9010300?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Barco R9010300, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Barco R9010300 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)