Français dropdown-ico

Manuel d’utilisation Vermont Casting 1920

32 pages 1.06 mb
Télécharger

Aller à la page of 32

Summary
  • Vermont Casting 1920 - page 1

    Homeowner ’ s Installation and Operating Manual For use in the United States and Canada SAFETY NOTICE: IF THIS APPLIANCE IS NOT PROPERL Y INST ALLED, OPERA TED AND MAIN - T AINED, A HOUSE FIRE MA Y RESUL T . TO REDUCE THE RISK OF FIRE, FOLLOW THE INST ALLA TION INSTRUCTIONS. F AILURE TO FOLLOW INSTRUCTIONS MA Y RESUL T IN PROPERTY DAMAGE, BODIL Y ...

  • Vermont Casting 1920 - page 2

    2 Aspen W oodburning Stove 30000369 Introduction Thank you for choosing a V ermont Castings Aspen to meet your heating needs. We’re confident you will find the Aspen to be an effective wood-burning heater incorporating modern, non-catalytic combustion technology with the classic aesthetic appeal of its V ermont Castings lineage. The Aspen achie ...

  • Vermont Casting 1920 - page 3

    3 Aspen W oodburning Stove 30000369 Specifications Aspen, Model 1920 EP A Emissions rating ............... 4.3 (g/h, non-catalytic)* Maximum heat output .......................... 18,000 Btu’s/hr . 1 Area heated ....................... Up to 600 sq. ft. (56 sq. m) 2 Fuel size/type ...................................... 16” (41 cm) logs Loading ...

  • Vermont Casting 1920 - page 4

    4 Aspen W oodburning Stove 30000369 Chimneys Y our stove must be connected either to a sound masonry chimney that meets local codes, to a relined masonry chimney that meets local codes, or to an approved prefabricated metal chimney . Whichever of those types you use, the chimney and chimney connec- tor must be in good condition and kept clean. If y ...

  • Vermont Casting 1920 - page 5

    5 Aspen W oodburning Stove 30000369 ST242 Chimney connector 12/13/99 djt Masonry Chimneys, cont’d. • Unused openings in an existing masonry chimney must be sealed with masonry to the thickness of the chimney wall, and the chimney liner should be repaired. Openings sealed with pie plates or wallpa- per are a hazard and should be sealed wit ...

  • Vermont Casting 1920 - page 6

    6 Aspen W oodburning Stove 30000369 ST243 thinble connection 12/13/99 djt Double-wall Chimney Connectors The Aspen is approved for installation in the U.S. and Canada with double-wall chimney connectors that have been tested and listed for use with solid-fuel burning appliances by a recognized testing laboratory . Follow the instructions for ...

  • Vermont Casting 1920 - page 7

    7 Aspen W oodburning Stove 30000369 Connection Above the Fireplace In this installation, the chimney connector enters the fireplace flue though a thimble located above the fire- place. The liner of the fireplace chimney should extend at least to the point at which the chimney connector enters the chimney . Follow all the guidelines for install- ...

  • Vermont Casting 1920 - page 8

    8 Aspen W oodburning Stove 30000369 ST275 wall with v entilated steel thimble Fig. 12 W all Pass-through with ventilated steel thimble. 24 ga. Sheet Steel Supports 24 ga. Sheet Steel Supports 2” (51mm) Min. Chimney clearance to sheet steel supports and combustibles 2” (51mm) Min. Chimney Flue 2” (51mm) Min. air space Prefab Chim- ney ...

  • Vermont Casting 1920 - page 9

    9 Aspen W oodburning Stove 30000369 Floor Protection A tremendous amount of heat radiates from the bottom plate of your Aspen. The floor area directly under and around the stove will require protection from radiant heat as well as from stray sparks or embers that may escape the firebox. Heat protection is provided through the use of a Bot- tom He ...

  • Vermont Casting 1920 - page 10

    10 Aspen W oodburning Stove 30000369 Clearance to Surrounding Combustible Materials When the stove is operating, both the stoveplate and the chimney connector radiate heat in all directions. A safe installation requires that adequate clearance be maintained between the stove and nearby combustible materials to ensure that those materials do not ove ...

  • Vermont Casting 1920 - page 11

    1 1 Aspen W oodburning Stove 30000369 W all Shields W all shields should be constructed of 24 gauge or heavier sheet metal, or another noncombustible mate- rial such as 1/2” (13mm) insulation board or common brick “laid on flat,” with the 3 ¹⁄₂ " (90mm) side down. Shields must be spaced out from the combustible sur- face 1" (2 ...

  • Vermont Casting 1920 - page 12

    12 Aspen W oodburning Stove 30000369 ST252a mantel clrncs 12/14/99 djt When: A = 9” (229 mm) Max. B = 22 ¹⁄₂ " (572 mm) Min. A = 7 ¹⁄₂ " (191 mm) Max. B = 21” (533 mm) Min. A = 6” (152 mm) Max. B = 19 ¹⁄₂ " (495 mm) Min. A = 4 ¹⁄₂ " (1 14 mm) Max. B = 18” (457 mm) Min. A = 3” (76 mm) Max. B = ...

  • Vermont Casting 1920 - page 13

    13 Aspen W oodburning Stove 30000369 Aspen Clearance Chart Use the chart below together with the diagrams on the next page to determine the required clearance for your particu- lar installation. Stove clearances are measured from the top plate to the combustible surface. Chimney connector clearances are measured from the connector surface and take ...

  • Vermont Casting 1920 - page 14

    14 Aspen W oodburning Stove 30000369 ST255 e xit diagr am 12/15/99 djt S B C C D E F J K NA NA O R N M Q A H I U P V T S G T op Exit, No Heat Shields Rear Exit, Rear Heat Shield only T op Exit, Rear Heat Shield only T op Exit, Rear Heat Shield and single-wall connector w/ shields, or double-wall connector Stove Installed Parallel to W all Sto ...

  • Vermont Casting 1920 - page 15

    15 Aspen W oodburning Stove 30000369 ST257 install ashlip 12/99 1/4-20 x ⁵ / ₈ ” hex head screws with washers Fig. 23 Attach the Ashlip to the bottom plate. ST257 2. Locate the hex bolt (Fig. 23) located in the center rear edge of the stove bottom plate. Loosen this bolt just enough to engage the Adapter clevis tab under the washer and ...

  • Vermont Casting 1920 - page 16

    16 Aspen W oodburning Stove 30000369 Install the Rear Heat Shield The #1896 Rear Heat Shield reflects radiant heat away from combustible materials located behind the stove. Its use enables you to install the stove at a reduced clear- ance to combustible materials in accordance with the specifications in this manual. 1. Remove the three phillips h ...

  • Vermont Casting 1920 - page 17

    17 Aspen W oodburning Stove 30000369 How the Aspen Works Combustion control is achieved in the Aspen through two separate air delivery systems. The primary air control lever , located at the left rear corner of the stove, controls the amount of incoming pri- mary air for starting, maintaining, and reviving the fire. More air entering the stove mak ...

  • Vermont Casting 1920 - page 18

    18 Aspen W oodburning Stove 30000369 In newer homes that are well-insulated and weather- tight, poor draft may result from insufficient air in the house. In such cases, a slightly opened window or door , near the stove on the windward side of the house will provide the fresh air needed. A more effective option for delivering ample combustion air t ...

  • Vermont Casting 1920 - page 19

    19 Aspen W oodburning Stove 30000369 Once the draft is established, open the front door and light the rest of the fuel bed at the bottom. Do not light the main bed of fuel until the chimney be- gins drawing. Step 4. After the stove has been broken-in using Steps 1-3, continue to build the fire gradually . Add larger wood with a diameter of 3-4” ...

  • Vermont Casting 1920 - page 20

    20 Aspen W oodburning Stove 30000369 Ash Disposal Remove ash before it reaches the top of the ash pan. Check the level at least once a day , and before each re- fueling. Using stove gloves, pull the ash pan out of the stove by its handle. Remove the ash pan and properly dispose of the ashes. Be sure to keep the pan level dur- ing disposal. Empty th ...

  • Vermont Casting 1920 - page 21

    21 Aspen W oodburning Stove 30000369 Let the fire in the stove go out and allow the stove to cool completely before beginning any maintenance procedure. Care of the Cast Iron Surface An occasional dusting with a dry rag will keep the painted cast iron of your Aspen looking new . The stove’s paint can be touched up as needed. First, clean the are ...

  • Vermont Casting 1920 - page 22

    22 Aspen W oodburning Stove 30000369 Gasket Replacement Y our Aspen uses rope-type fiberglass gaskets to make a tight seal between some parts. With use, particularly on those parts that move, gaskets can become brittle and compressed and can begin to lose their effective- ness. These will need periodic replacement. The sizes of replaceable gasket ...

  • Vermont Casting 1920 - page 23

    23 Aspen W oodburning Stove 30000369 When wood is burned slowly , it produces tar , organic vapors and moisture that combine to form creosote. The creosote vapors condense in the relatively cool chimney flue. As a result, creosote residue accumulates on the flue lining. When ignited, this creosote makes an extremely hot fire within the flue sys ...

  • Vermont Casting 1920 - page 24

    24 Aspen W oodburning Stove 30000369 Y our stove is only one part of a system that includes the chimney , the operator , the fuel and the home. The other parts of the system will affect how well the stove works. When there is a good match between all the parts, the stove works well. Wood stove operation depends on natural (unforced) draft. Natural ...

  • Vermont Casting 1920 - page 25

    25 Aspen W oodburning Stove 30000369 Pipe & Chimney Layout Every bend in the flue will act as a brake on the exhaust as it flows from the firebox to the chimney cap. The ideal pipe and chimney layout is straight up from the stove through a completely straight chimney . Use this layout if at all possible as it will promote optimum stove perfo ...

  • Vermont Casting 1920 - page 26

    26 Aspen W oodburning Stove 30000369 Negative Pressure Good draft also depends on a sufficient supply of air to the stove. The chimney cannot pull more air than is available. Sluggish draft can be caused by a house that is tight enough to prevent the ready flow of air to the stove, or by competition between the stove and other appliances that ven ...

  • Vermont Casting 1920 - page 27

    27 Aspen W oodburning Stove 30000369 1 19 19 19 4 8 7 14 34 48 32 32 48 48 31 47 30 29 49 26 27 23 52 16 15 39 38 9 10 38 50 41 24 43 1 1 43 36 42 37 33 21 12 41 20 19 50 38 47 21 35 41 13 44 38 51 6 5 51 19 40 17 18 3 51 38 41 2 50 53 38 50 22 28 45 25 46 54 0369 Aspen 1920 parts 8/02 55 56 CFM Corporation reserves the right to make changes in des ...

  • Vermont Casting 1920 - page 28

    28 Aspen W oodburning Stove 30000369 Aspen W oodburning Stove Model 1920 (continued) 1. T op See Chart Pg. 28 2. Right Side See Chart Pg. 28 3. Secondary Air Channel, Right 30000606 4. Left Side See Chart Pg. 28 5. Secondary Air Channel, Left 30000607 6. Secondary Air T ube 30000368 7. Bottom 30000343 8. Bottom, Inner 30000346 9. Ashlip See Chart P ...

  • Vermont Casting 1920 - page 29

    29 Aspen W oodburning Stove 30000369 ...

  • Vermont Casting 1920 - page 30

    30 Aspen W oodburning Stove 30000369 ...

  • Vermont Casting 1920 - page 31

    31 Aspen W oodburning Stove 30000369 W arranty Limited 3 Y ear W arranty CFM Corporation warrants that this woodburning stove will be free of defects in material and workmanship for a period of three years from the date you receive it, except that the catalyst, thermostat assembly , handles, glass door panels, cement, and gasketing shall be warrant ...

  • Vermont Casting 1920 - page 32

    © CFM Corporation 410 Admiral Blvd. • Mississauga, Ontario, Canada L5T 2N6 800-668-5323 • www .cfmcorp.com CFM Corporation ...

Fabricant Vermont Casting Catégorie Stove

Les documents que nous recevons du fabricant de l'appareilVermont Casting 1920 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Vermont Casting
- manuels d’utilisations 1920
- fiches produit Vermont Casting
- dépliants
- ou étiquettes-énergie Vermont Casting 1920
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Vermont Casting 1920.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Vermont Casting 1920, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Vermont Casting 1920. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Vermont Casting 1920.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Vermont Casting 1920, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Vermont Casting 1920 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Vermont Casting 1920.

Le manuel d’utilisation complet Vermont Casting, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Vermont Casting 1920 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Vermont Casting 1920, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lVermont Casting 1920 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Vermont Casting 1920 - qui devraient nous aider dans les premières étapes lors de l'utilisation Vermont Casting 1920
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Vermont Casting 1920
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Vermont Casting 1920 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Vermont Casting 1920?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Vermont Casting 1920, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Vermont Casting 1920 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)