-
Canon G1 - page 1
Operation guide Hi gh C ap a city Sta ck e r - G 1 ...
-
Canon G1 - page 2
Copyright © 2014 by Canon Inc. All Rights Reserved. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or by any information storage or retrieval system without the prior written permission of Canon Inc. © 2014 Océ. All rights reserved. No part ...
-
Canon G1 - page 3
Contents Chapter 1 Preface................................................................................................................................. 5 Notes for the reader......................................................................................................................................... 6 Chapter 2 Components and their f ...
-
Canon G1 - page 4
Contents 4 Canon High Capacity Stacker-G1 ...
-
Canon G1 - page 5
Chapter 1 Preface ...
-
Canon G1 - page 6
Notes for the reader Introduction This manual helps you to use the High Capacity Stacker-G1 . The manual contains a description of the product and guidelines to use and operate the High Capacity Stacker-G1 . Definition Attention-Getters Parts of this manual require your special attention. These parts can provide the following: • Additional genera ...
-
Canon G1 - page 7
Chapter 2 Components and their functions ...
-
Canon G1 - page 8
Description of the main parts Illustration 1 7 4 10 9 3 2 8 6 5 [1] The main parts of High Capacity Stacker-G1 Main parts Part Description 1 Front door The front door gives access to the registration unit and the error locations A1-A7. 2 Front cover The front cover gives access to the flip rings and error location C1 (flip wheel). 3 Slide door The ...
-
Canon G1 - page 9
Part Description 9 Eject tray The eject tray receives the stack from the stack tray. Then the eject tray moves horizontally out of the stacker. When the eject tray is outside the stacker, you can re- move the stack. In the meantime, the filling of the stack tray can continue. When you empty the eject tray regu- larly, the printer can continue print ...
-
Canon G1 - page 10
Description of the stacker control panel Illustration A B C D E [2] The items of the stacker control panel Description of the stacker control panel Item Description A Filling level indicator (off, orange or red). B Stack height indicators. C Eject button. The eject button LED can have the following statuses: • Off: Normal situation • Blinking s ...
-
Canon G1 - page 11
Status Description 1 stack height indicator is lit. The stack tray contains at least 1 sheet. All stack height indicators are lit. The stack height comes close to the factory default value of 302 mm (11.9"). Stacks with a height of maximum 302 mm (11.9") are always ejected properly. For higher stacks, there is a risk that the top sheets t ...
-
Canon G1 - page 12
Description of the stacker control panel 12 Chapter 2 - Components and their functions Canon High Capacity Stacker-G1 ...
-
Canon G1 - page 13
Chapter 3 Basic instructions ...
-
Canon G1 - page 14
Turn the stacker on The power switch is optional. If the switch is missing, the high capacity stacker is turned on automatically when the printer is turned on. CAUTION Never plug in the power plug while your hands are wet. Doing so creates the risk of electric shock. Illustration [3] The location of the power switch Procedure 1. Confirm that the po ...
-
Canon G1 - page 15
Turn the stacker off The power switch is optional. If the switch is missing, the high capacity stacker is turned off automatically when the printer is turned off. CAUTION Never unplug the power plug while your hands are wet. Doing so creates the risk of electric shock. Illustration [4] The location of the power switch Procedure 1. Open the power sw ...
-
Canon G1 - page 16
Eject a stack manually Eject a stack When you press the eject button on the stack‐ er Then 1x The eject button on the stacker control panel blinks slowly (green). The stack will be ejected on the next possible set boundary. Then the filling of the stacker continues. Therefore, the stack will usually contain com- plete sets. 2x The eject button on ...
-
Canon G1 - page 17
Chapter 4 Use the stacker (PRISMAsync) ...
-
Canon G1 - page 18
Filling scenarios Filling scenarios Scenario Description Where to define the settings? Filling with default settings The stack tray is filled until the stack reaches the factory default height of 302 mm (11.9"). Then the stack is ejected. Next job, next tray Each new job is delivered to an empty stack tray. On the printer control panel: [Sys- ...
-
Canon G1 - page 19
Change the default stacker settings Introduction In the Settings Editor on the PRISMAsync controller, a key operator can define a number of default stacker settings ([Preferences] -> [Print job defaults] - [Stacker]). These settings are described below. Some of these default settings can be overruled in an application, on the printer operator pa ...
-
Canon G1 - page 20
Setting Description [Maximum stack height] See the section 'Set the maximum stack height'. Procedure 1. Access the Settings Editor on the PRISMAsync controller. 2. Click [Preferences] - [Print job defaults]. 3. Scroll down to the [Stacker] section. 4. Click the setting you want to change. 5. Change the value. 6. Click [OK]. Change the def ...
-
Canon G1 - page 21
Set the maximum stack height Introduction The maximum stack height is 355 mm (14") or 3,000 sheets A4/LTR (80 g/m² / 20 lb bond). However, to guarantee a safe ejection of the stack, the factory default is set to 302 mm (11.9"). Depending on your needs, you can set the maximum stack height to a higher or lower value. When the stack reache ...
-
Canon G1 - page 22
Set the minimum filling level Introduction NOTE The [Minimum filling level] setting is only applied when, on the printer control panel, the [Next output tray] setting is set to [When tray is full] (under [System] -> [Setup] -> [Workflow profile] -> [Output]). Purposes The [Minimum filling level] setting has the following purposes. • Maxi ...
-
Canon G1 - page 23
Examples of using the [Maximum stack height] and the [Minimum filling level] settings Example 1 - Fill a box Assumption In the Settings Editor, the [Maximum stack height] setting is set to 302 mm (11.9"). In the Settings Editor, the [Minimum filling level] setting is set to 80%. 1 job using plain paper with a stack height > 302 mm (11.9&quo ...
-
Canon G1 - page 24
250 mm / 9.8” 250 mm / 9.8” 80% 80% Example 3 - Keep sets together Assumption In the Settings Editor, the [Maximum stack height] setting is set to 302 mm (11.9"). In the Settings Editor, the [Minimum filling level] setting is set to 80%. 1 job with a stack height of 100 mm (3.9"). 4 copies required. What happens? The sets are stacked. ...
-
Canon G1 - page 25
302 mm / 1 1.9” 302 mm / 1 1.9” 80% 80% Example 5 - Two jobs exceed the maximum stack height Assumption In the Settings Editor, the [Maximum stack height] setting is set to 302 mm (11.9"). In the Settings Editor, the [Minimum filling level] setting is set to 80%. On the printer operator panel, the workflow profile setting [Next output tray ...
-
Canon G1 - page 26
Examples of using the [Maximum stack height] and the [Minimum filling level] settings 26 Chapter 4 - Use the stacker Canon High Capacity Stacker-G1 ...
-
Canon G1 - page 27
Chapter 5 Troubleshooting ...
-
Canon G1 - page 28
Error location labels Introduction The stacker has various labels inside that indicate error locations. You can access these locations to remove error sheets or jammed paper. Illustration A9 A6 A2 A3 A4 A5 A7 A1 [5] Example of a label inside the stacker Error codes and locations Overview of error codes and locations Error codes Error locations How ...
-
Canon G1 - page 29
Error location labels Chapter 5 - Troubleshooting 29 Canon High Capacity Stacker-G1 ...
-
Canon G1 - page 30
Remove an error sheet from the internal error tray (A1) When to do A red LED lights up at the stacker control panel. Illustration [6] Indication at the stacker control panel Remove an error sheet from A1 Step Action Illustration 1 Open the front door. 2 Remove the sheets from the internal error tray (A1). 3 Close the front door. Remove an error she ...
-
Canon G1 - page 31
Clear a paper jam in the input paper path (A2-A5) When to do A red LED lights up at the stacker control panel. Illustration [7] Indication at the stacker control panel Clear a paper jam at A2-A5 Step Action Illustration 1 Open the front door. 2 Turn A7 to remove jammed paper. CAUTION When you turn the knob, be careful not to get your fingers caught ...
-
Canon G1 - page 32
Step Action Illustration 4 Close the front door. Clear a paper jam in the input paper path (A2-A5) 32 Chapter 5 - Troubleshooting Canon High Capacity Stacker-G1 ...
-
Canon G1 - page 33
Clear a paper jam in the input paper path of the registration unit (A6-A7) When to do A red LED lights up at the stacker control panel. Illustration [8] Indication at the stacker control panel Clear a paper jam at A6-A7 Step Action Illustration 1 Open the front door. 2 Turn A7 to remove the jammed paper. CAUTION When you turn the knob, be careful n ...
-
Canon G1 - page 34
Step Action Illustration 3 Remove the jammed paper from A6. CAUTION If the lower input paper path of the registration unit also con‐ tains jammed paper, only au‐ thorized and trained persons are allowed to remove the jam‐ med paper. 4 Close the front door. Clear a paper jam in the input paper path of the registration unit (A6-A7) 34 Chapter 5 ...
-
Canon G1 - page 35
Clear a paper jam in the paper path (B1) When to do A red LED lights up at the stacker control panel. Illustration [9] Indication at the stacker control panel Clear a paper jam at B1 Step Action Illustration 1 Open the top cover. 2 Open B1 and remove the jammed paper. 4 Clear a paper jam in the paper path (B1) Chapter 5 - Troubleshooting 35 Canon H ...
-
Canon G1 - page 36
Step Action Illustration 3 Close the top cover. CAUTION When you close the top cover, be careful not to get your fin‐ gers caught. Clear a paper jam in the paper path (B1) 36 Chapter 5 - Troubleshooting Canon High Capacity Stacker-G1 ...
-
Canon G1 - page 37
Clear a paper jam in the horizontal paper path (B2-B5) When to do A red LED lights up at the stacker control panel. Illustration [10] Indication at the stacker control panel Clear a paper jam at B2-B5 Step Action Illustration 1 Open the top cover. 2 Open B2, B3, B4 and B5 to remove the jammed paper. 4 Clear a paper jam in the horizontal paper path ...
-
Canon G1 - page 38
Step Action Illustration 3 Close the top cover. CAUTION When you close the top cover, be careful not to get your fin‐ gers caught. Clear a paper jam in the horizontal paper path (B2-B5) 38 Chapter 5 - Troubleshooting Canon High Capacity Stacker-G1 ...
-
Canon G1 - page 39
Clear a paper jam at the flip wheel (C1) When to do A red LED lights up at the stacker control panel. Illustration [11] Indication at the stacker control panel Clear a paper jam at C1 Step Action Illustration 1 Open the front cover. 2 Open C1 and remove the jammed paper from the flip wheel. 3 Close the front cover. Clear a paper jam at the flip whe ...
-
Canon G1 - page 40
Clear a paper jam at the flip wheel (C1) 40 Chapter 5 - Troubleshooting Canon High Capacity Stacker-G1 ...
-
Canon G1 - page 41
Chapter 6 Options ...
-
Canon G1 - page 42
Use the EasyLift to unload the stacker Introduction The optional EasyLift is a manual device that helps you to remove a stack of paper more easily. NOTE The EasyLift is delivered with a user guide. Refer to the EasyLift user guide for more information. This section contains a brief description for reference only. Examples of stack weights The table ...
-
Canon G1 - page 43
Step Action Illustration 2 When lifting, make sure to bend your knees and keep your back straight. CAUTION Do not lift more than 15 kg (33 lb) to avoid physical injuries. Please observe the national health and safety regulations in your country. 3 Lift the EasyLift to remove the paper from the eject tray. Make sure to place the EasyLift on a level ...
-
Canon G1 - page 44
Use the EasyLift to unload the stacker 44 Chapter 6 - Options Canon High Capacity Stacker-G1 ...
-
Canon G1 - page 45
Appendix A Specifications ...
-
Canon G1 - page 46
Specifications Item Specification Paper size/weight/type Paper size (Top tray, stack tray, eject tray): A3, B4, A4R, A4, B5R, B5, A5R LGL, LTR, LTRR, STMTR, SRA3, EXEC, EXECR 11" x 17", 12" x 18", 13" x 19" Custom sizes: 140 mm x 182 mm - 330.2 mm x 487.7 mm (5.5" x 7.2" - 13.0" x 19.2") Weight*: 50 ...
-
Canon G1 - page 47
Index E Eject a stack manually As soon as possible......................................... 16 At the next set boundary................................. 16 Error sheet A1...................................................................... 30 Internal error tray............................................. 30 F Filling level....................... ...
-
Canon G1 - page 48
Index 48 Canon High Capacity Stacker-G1 ...
-
Canon G1 - page 49
CAN ON I NC . 30 - 2, Sh imo mar uko 3 - cho me, O hta -k u, T o k yo 1 46 - 85 01 , J apa n CAN ON U .S .A . , IN C. On e Can on Pa rk , Me lv il l e, NY 1 1 7 47 , U.S. A. CAN ON CA NA DA IN C. 63 90 D ix ie Ro ad Mi ssi ss aug a, O ntar io L 5T 1 P7 , C ana da CAN ON E URO P A N . V . Bove nker ker weg 5 9 , 1 1 8 5 XB Am ste lvee n, The N eth e ...
Avez-vous une question à propos de Canon G1?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec Canon G1, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Canon G1 il est probable qu’il a envie de partager la façon de le résoudre.