-
Emerson EWD2003 - page 1
OWNER’S MANUAL If you need additional assistance for set-up or operating after reading owner’s manual, please call TOLL FREE : 1 - 800 - 256-2487 or visit our web site at http://www.funai-corp.com Please read before using this equipment. OPEN/CLOSE OUTPUT REC REW FF VIDEO AUDIO CH-DOWN POWER CH-UP STOP/EJECT PLAY DVD VCR TIMER REC STOP PLA Y DI ...
-
Emerson EWD2003 - page 2
– 2 – EN 1L25 W ARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. LASER SAFETY This unit employs a laser . Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury . CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCED ...
-
Emerson EWD2003 - page 3
– 3 – EN 1L25 IMPOR T ANT SAFEGUARDS 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions- The safety and operating instructions should be retained for future reference. 3. Heed W arnings - All warnings on the appliance and in the operating instructions should b ...
-
Emerson EWD2003 - page 4
– 4 – EN 1L25 A NOTE ABOUT RECYCLING This product ’ s packaging materials are recyclable and can be reused. Please dispose of all materials in accordance with your local recycling regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes. The serial n ...
-
Emerson EWD2003 - page 5
– 5 – EN 1L25 T ABLE OF CONTENTS ■ LASER SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 ■ IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . 3 ABOUT COPYRIGHT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 SUPPLIED ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . ...
-
Emerson EWD2003 - page 6
– 6 – EN 1L25 FEA TURES Mode ¡ Dolby Digital sound This DVD/VCR COMBINA TION UNITS can handle Dolby Digital surround sound with 5.1 channels when con- nected to a Dolby Digital decoder . ¡ Still/fast/slow/step pla yback ¡ Random playbac k for audio CD and MP3 ¡ Program pla yback for audio CD and MP3 ¡ D VD menus in a desired language ¡ Sc ...
-
Emerson EWD2003 - page 7
– 7 – EN 1L25 ABOUT THE DISCS The following discs can be played back on this DVD/VCR COMBINA TION UNITS. ¡ D VD video ¡ D VD-R/RW* ¡ D VD+R/RW* ¡ A udio CD ¡ CD-R/R W* ¡ MP3* * Depending on the types or the writing method of the medium some discs can not be played. • Some DVD-R/R W , DVD+R/R W , or CD-R/R W discs made on personal comput ...
-
Emerson EWD2003 - page 8
– 8 – EN 1L25 OPERA TING CONTROLS AND FUNCTIONS OPEN/CLOSE OUTPUT REC REW FF VIDEO AUDIO CH-DOWN POWER CH-UP STOP/EJECT PLAY DVD VCR TIMER REC STOP PLA Y DISC IN FWD REV PLAY 1 2 3 4 7 68 25 23 24 22 20 19 18 17 16 15 14 13 12 11 10 5 9 21 FRONT P ANEL REMO TE CONTROL + 123 456 789 01 0 SPEED AUDIO POWER SKIP/CH. SLOW VCR/TV DISPLA Y P AUSE PLA ...
-
Emerson EWD2003 - page 9
– 9 – EN 1L25 18. OUTPUT Button [page 12] Press to select DVD mode or VCR mode. ● Y ou can switch the output mode either by pressing OUTPUT on the front panel, or by pressing DVD or VCR on the remote control. However , if you press OUTPUT on the front panel first, you need to re-select the corr esponding mode by pressing DVD or VCR on the rem ...
-
Emerson EWD2003 - page 10
– 10 – EN 1L25 bers during channel preset. s Button Press to cancel a setting of timer program. Press to correct digits when setting program (For example: setting clock or timer program). Press to add or delete channel numbers during channel preset. 47. ENTER Button ● D VD mode [page 22] Press to accept a setting. 48. g Button ● D VD mode [ ...
-
Emerson EWD2003 - page 11
– 11 – EN 1L25 LOADING THE BA TTERIES 1. Open the battery compartment cover . 2. Insert two AA batteries (supplied), with each one oriented correctly . 3. Close the cover . Notes ¡ Do not mix alkaline and manganese batteries. ¡ Do not mix old and new batteries. 56. ANT -IN (Antenna In) Jack Connect your antenna, Cable Box, or Direct Broadcast ...
-
Emerson EWD2003 - page 12
– 12 – EN 1L25 VCR/DVD SWITCHING Since this product comprises VCR and DVD players, it is necessary to select the correct output mode. + 123 456 789 01 0 SPEED AUDIO POWER SKIP/CH. SLOW VCR/TV DISPLA Y P AUSE PLA Y STOP RECORD ENTER RETURN TITLE MENU SETUP CLEAR/ C.RESET ZOOM MODE A - B ANGLE SEARCH MODE REPEA T SUBTITLE T -SET D VD VCR OPEN/CLO ...
-
Emerson EWD2003 - page 13
– 13 – EN 1L25 CONNECTING TO A TV ANT -IN ANT -OUT VIDEO OUT AUDIO OUT S-VIDEO OUT AUDI O OUT DIGIT AL AUDIO OUT COAXIAL Y Cb Cr L R COMPONENT VIDEO OUT AUDIO IN VIDEO IN DVD/VCR VCR DVD R L T o VIDEO OUT jack T o VIDEO INPUT jack T o Right (red) and Left (white) Antenna/Cable signal T o ANT . IN of TV T o A UDIO INPUT jacks T o A UDIO OUT jack ...
-
Emerson EWD2003 - page 14
– 14 – EN 1L25 ANT -IN ANT -OUT VIDEO OUT AUDIO OUT S-VIDEO OUT AUDIO OUT DIGITAL AUDIO OUT COAXIAL Y Cb Cr L R COMPONENT VIDEO OUT AUDIO IN VIDEO IN DVD/VCR VCR DVD R L A/V -compatible or wide screen TV T o COMPONENT VIDEO INPUT jacks T o COMPONENT VIDEO OUT jacks T o Right (red) and Left (white) A UDIO INPUT jacks T o Right (red) and Left (wh ...
-
Emerson EWD2003 - page 15
– 15 – EN 1L25 CONNECTING T O A DOLBY DIGIT AL DECODER If using this DVD/VCR COMBINA TION UNITS to play a DVD disc in 5.1 channel Dolby Digital surround, the DVD/VCR COMBINA TION UNITS outputs a Dolby Digital data stream from its COAXIAL DIGIT AL AUDIO OUT jack. By hooking the DVD/VCR COMBINA TION UNITS up to a Dolby Digital decorder, you can e ...
-
Emerson EWD2003 - page 16
5 Begin channel preset b y pressing B once. The tuner scans and memo- rizes all active channels in your area. ¡ The VCR distinguishes between standard TV channels and cable channels. 6 After scanning, the tuner stops on the low- est memorized channel. The TV screen returns to TV mode. ¡ If “ AUT O SET UP ” appears on the TV screen again, chec ...
-
Emerson EWD2003 - page 17
– 17 – EN 1L25 CLOCK SET UP 1 Select main menu b y pressing MENU . ¡ If the clock is not set, the CLOCK SET menu appears first. In this case, follow step [3]. 2 Select "CLOCK SET" by pressing K or L . Then, press B . 3 Set the cloc k. ¡ T o go back one step, press s . 4 Start the clock b y pressing CLEAR/C.RESET or B . VCR CLOCK SET ...
-
Emerson EWD2003 - page 18
PICTURE SEARCH If you want to skip or repeat a scene during playback, press D or E . ¡ Press it again and the VCR will now search at super high speed. (in the LP/SLP modes only). INDEX SEARCH An index mark will be assigned at the beginning of each recordings you make. Y ou may skip to a specific marked point by following the steps below . 1 Press ...
-
Emerson EWD2003 - page 19
– 19 – EN 1L25 RECORDING FUNCTION It may be UNLA WFUL to record copyrighted materi- al without the consent of the copyright owner . Accidental Erasure Pr evention T o prevent accidental recording on a recorded cassette, remove its record safety tab. T o record on it later , cover the hole with cellophane tape. Before recor ding, make sure: ¡ T ...
-
Emerson EWD2003 - page 20
– 20 – EN 1L25 HINTS FOR TIMER RECORDING ¡ If there is a power failure or the VCR is unplugged for more than 30 seconds, the clock setting and all timer settings will be lost. ¡ If a tape ends during TIMER RECORDING, the VCR will stop, eject the tape, and switch to the DVD mode automatically as the TIMER light blinks. (If the DVD power is off ...
-
Emerson EWD2003 - page 21
– 21 – EN 1L25 COPYING A VIDEO T APE SPECIAL FEA TURES Y ou can make copies of video tapes made by friends or relatives for your enjoyment. W arning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws. Connect the recording VCR (this unit), the playing VCR (another source) and your TV using the follow- i ...
-
Emerson EWD2003 - page 22
– 22 – EN 1L25 BASIC PLA YBACK Getting started ¡ T urn on the power of the TV , amplifier and any other components which are connected to the DVD. ¡ Make sure the TV and audio receiver (commercially available) are set to the correct channel. ¡ Select DVD mode by pressing DVD on the remote control or output on the front panel. 1 Press PO WER. ...
-
Emerson EWD2003 - page 23
– 23 – EN 1L25 TITLE MENU 1 Press TITLE. ¡ The title menu will appear . 2 If the feature is not a vailable, symbol may appear on the TV screen. 3 Press Arro w ( L / K / B / s ) to select an item, and ENTER to confirm selection. DVD-V STEP BY STEP PLA YBACK 1 During playbac k, press P A USE. ¡ Playback will pause and sound will be muted. 2 The ...
-
Emerson EWD2003 - page 24
– 24 – EN 1L25 TRACK There are three ways to begin playback on an Audio CD at a specific T rack. Using the Numerical buttons 1 Press Numerical buttons to enter the desired T rack number . ¡ Playback will start at the selected track. ¡ For single digit tracks (1-9), press a single number (eg. track 3, press 3). ¡ T o play track 26, press +10, ...
-
Emerson EWD2003 - page 25
– 25 – EN 1L25 REPEA T REPEA T TITLE / CHAPTER T o activate the repeat function, press REPEA T during playbac k. ¡ The repeat mode changes as described below every time you press the button. DVD-V REPEA T are available only during playback. CHAPTER TITLE OFF ( current chapter repeat) ( current title repeat) (repeat off ) Notes ¡ Repeat T itle ...
-
Emerson EWD2003 - page 26
– 26 – EN 1L25 RANDOM PLA YBACK This shuffles the playing order of tracks instead of playback in the sequence. 1 In stop mode, press MODE twice. ¡ RANDOM screen appears. 2 Press PLA Y to star t random pla yback. Note ¡ If you like to repeat the current track in the random selection, press REPEA T repeatedly until TRACK appears during playback ...
-
Emerson EWD2003 - page 27
– 27 – EN 1L25 RANDOM PLA YBACK 1 Press MODE twice while playbac k is stopped. 2 Press PLA Y to play the tracks in random order . MP3 This feature allows you to program a mp3 disc to play in a desired sequence. 1 Press MODE during playbac k is stopped. ¡ The PROGRAM screen will appear . 2 Press Arro w ( K / L ) to select a track, then press EN ...
-
Emerson EWD2003 - page 28
– 28 – EN 1L25 CHANGING THE ON-SCREEN DISPLA Y Y ou can check the information about the current disc by pressing DISPLA Y on the remote control. For DVD-Vs 1 Press DISPLA Y during playback to sho w current Chapter . ¡ The elapsed and remaining playing time of the current chapter will be displayed. 2 Press DISPLA Y again to show current Title. ...
-
Emerson EWD2003 - page 29
– 29 – EN 1L25 CONTROL LEVELS ¡ ALL All parental lock is cancelled. ¡ Level 8 DVD software of any grade (adult/general/children) can be played back. ¡ Levels 7 to 2 Only DVD software intended for general use and children can be played back. ¡ Level 1 Only DVD software intended for children can be played back, with those intended for adult a ...
-
Emerson EWD2003 - page 30
– 30 – EN 1L25 Adjust the Black Level Settings to make the black parts of the picture brighter . 1 Press MODE during playbac k. 2 Press ENTER to switch ON/OFF . ON: Makes the dark parts brighter . OFF: Shows the original picture as recorded. 3 Press MODE twice or RETURN to exit. DVD-V BLACK LEVEL SETTING Y ou can enjoy stereophonic visual space ...
-
Emerson EWD2003 - page 31
– 31 – EN 1L25 Language options are not available with some discs. 1 Press SETUP in ST OP mode . 2 Press B to select CUSTOM, then press ENTER. ¡ CUSTOM mode will appear . 3 Press Arro w ( s / B ) to select LANGUA GE, then press ENTER to confirm. 4 Press Arro w ( K / L ) to select the next items, then press ENTER. ¡ If you want to return to LA ...
-
Emerson EWD2003 - page 32
– 32 – EN 1L25 TROUBLESHOOTING GUIDE If the DVD/VCR COMBINA TION UNITS does not perform properly when operated as instructed in this Owner's Manual, check the player consulting the following checklist. V C R D V D V C R D V D PROBLEM CORRECTIVE A CTION No power . • Make sure the po wer plug is connected to an A C outlet. • Make sure th ...
-
Emerson EWD2003 - page 33
– 33 – EN 1L25 MAINTENANCE SERVICING ¡ Should your DVD/VCR COMBINA TION UNITS become inoperative, do not try to correct the prob- lem by yourself. There are no user -serviceable parts inside. T urn off, unplug the power cord, and please call our help line at 1-800-256-2487 to locate an Authorized Service Center . CLEANING THE CABINET ¡ Use a ...
-
Emerson EWD2003 - page 34
– 34 – EN 1L25 SPECIFICA TIONS Product type: DVD player with V ideo Cassette Recorder Discs: DVD video Audio CD V ideo Cassette tape Converter output: VHF Channel 3 or 4. Power source: 120 V AC +/- 10%, 60 Hz +/- 0.5% Power consumption: 24 W (standby: 7.0 W) Operating temperature: 41 ˚ F (5 ° C) to 104 ˚ F (40 ° C) Dimensions: W 17-1/8 ” ...
-
Emerson EWD2003 - page 35
– 35 – SP 1L25 CONTROLES DEL FUNCIONAMIENTO Y SUS FUNCIONES OPEN/CLOSE OUTPUT REC REW FF VIDEO AUDIO CH-DOWN POWER CH-UP STOP/EJECT PLAY DVD VCR TIMER REC STOP PLAY DISC IN FWD REV PLAY 1 2 3 4 7 68 25 23 24 22 20 19 18 17 16 15 14 13 12 11 10 5 9 21 P ANEL DELANTERO P ANEL REMO T O + 123 456 789 01 0 SPEED AUDIO POWER SKIP/CH. SLOW VCR/TV DISP ...
-
Emerson EWD2003 - page 36
– 36 – SP 1L25 22. Bot ó n FWD (D VD) Presione para avanzar r á pidamente el Disco. Presione el Bot ó n P AUSE, luego presione el Bot ó n FWD iniciar a reproducci ó n en movimiento lento. Presione el Bot ó n FWD repetidamente para cambiar la velocidad de avance del movimiento lento. Presione para saltar Cap í tulos o Pistas. 23. Bot ó n ...
-
Emerson EWD2003 - page 37
– 37 – SP 1L25 48. Bot ó n g ● Modo D VD Pulse para avanzar r á pidamente el disco. Pulse P AUSE, luego pulse este bot ó n para comenzar la reproducci ó n en movimiento lento. Pulse este bot ó n en forma repetida para cambiar la velocidad de avance en movimiento lento. ● Modo VCR Pulse para avanzar r á pidamente la cinta o para ver la ...
-
Emerson EWD2003 - page 38
– 38 – SP 1L25 CAMBIO DE VCR/DVD Como este producto se utiliza del reproductor VCR y DVD, es necesario cambiar uno del otro. + 123 456 789 01 0 SPEED AUDIO POWER SKIP/CH. SLOW VCR/TV DISPLA Y P AUSE PLA Y STOP RECORD ENTER RETURN TITLE MENU SETUP CLEAR/ C.RESET ZOOM MODE A - B ANGLE SEARCH MODE REPEA T SUBTITLE T -SET D VD VCR OPEN/CLOSE OUTPUT ...
-
Emerson EWD2003 - page 39
– 39 – SP 1L25 CONECT ANDO A UN TV QUE TIENE TOMA DE ENTRADA DE S- V Í DEO o T OMAS DE ENTRADA DE V Í DEO COMPONENTE CONECT ANDO A UN TV DVD/VCR A CONEXI Ó N DE TV 1. Desconecte el cord ó n de alimentaci ó n AC del toma de corriente AC. 2. Desconecte la antena o cable del TV . 3. Conecte la antena o cable a la toma ANT .IN del DVD/VCR. 4. ...
-
Emerson EWD2003 - page 40
– 40 – SP 1L25 PREP ARACI Ó N DE RELOJ Ajuste el reloj con precisi ó n para grabaci ó n con tempo- rizador autom á tica adecuada. Le sugerimos que usted utilice un TV o estaci ó n de radio como su fuente de tiempos. 1 Presione MENU dos veces para llamar el men ú principal. (Si usted ha ajustado ya el reloj, usted s ó lo tiene que presion ...
-
Emerson EWD2003 - page 41
– 41 – EN 1L25 MEMO H9410UD(EN).qx33 03.1.17 6:21 PM Page 41 ...
-
Emerson EWD2003 - page 42
– 42 – EN 1L25 MEMO H9410UD(EN).qx33 03.1.17 6:21 PM Page 42 ...
-
Emerson EWD2003 - page 43
– 43 – EN 1L25 MEMO H9410UD(EN).qx33 03.1.17 6:21 PM Page 43 ...
-
Emerson EWD2003 - page 44
0VMN 03884 H94 2 0UD ★★★★★ Printed in China LIMITED W ARRANTY FUNAI CORP . will repair this Emerson product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURA TION: P AR TS: FUNAI CORP . will provide parts to replace defective parts without charge for one (1) year from the date of original retai ...
Avez-vous une question à propos de Emerson EWD2003?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec Emerson EWD2003, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Emerson EWD2003 il est probable qu’il a envie de partager la façon de le résoudre.