Français dropdown-ico

Manuel d’utilisation Aiphone AI-900

48 pages 0.72 mb
Télécharger

Aller à la page of 48

Summary
  • Aiphone AI-900 - page 1

    Please follow the instructions in this manual to obtain the optimum results from this unit. We also recommend that you keep this manual handy for future reference. Be sure to leave system installations, adjustments, and data settings to the dealer from whom you have purchased. INST ALLA TION MANU AL V OICE SECURITY SYSTEM AI-900 ...

  • Aiphone AI-900 - page 2

    2 T ABLE OF CONTENTS 1. SAFETY PRECA UTIONS ..................................................................................... 4 2. FCC REQUIREMENTS ......................................................................................... 6 3. INDUSTRIAL CANAD A REQUIREMENTS .................................................... 7 4. GENERAL DESCR ...

  • Aiphone AI-900 - page 3

    3 12. WIRING 12.1. Wiring from the Station or Outside Line .............................................................. 21 12.2. Supplied Connector Connection ......................................................................... 22 12.3. AI-900MS Master Station Interface Card Connection 12.3.1. Master Station and AI-900MS connection ......... ...

  • Aiphone AI-900 - page 4

    4 When Installing the Unit [Applicable to the exchange and the station] • Do not expose the unit to rain or an environment where it may be splashed by water or other liquids, as doing so may result in fire or electric shock. • Do not cut, kink, otherwise damage nor modify the power supply cord and connection cord. In addition, avoid using the c ...

  • Aiphone AI-900 - page 5

    5 • Do not touch the power cord during thunder and lightning, as this may result in electric shock. • Do not connect any power supply other than specified to the AI-900MF's DC power input terminals. Doing so could result in fire or damage to the unit. When Installing the Unit [Applicable to the exchange and the station] • Avoid installin ...

  • Aiphone AI-900 - page 6

    6 2. FCC REQUIREMENTS (1) The AI-900 complies with FCC Rules, Part 68. On this equipment is a label which contains, among other information, the FCC Part 68 registration number. ( 2 ) The ringer equivalence number (REN) is used to determine the quality of devices which may be connected to the telephone line. Excessive RENs on the telephone line may ...

  • Aiphone AI-900 - page 7

    7 3. INDUSTR Y CANAD A REQUIREMENTS ( 1 ) ''NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is confirmed by the registration number. The abbreviation, IC, before the registration number signifies that registration was performed based on a Declaration of Conformity indicating th ...

  • Aiphone AI-900 - page 8

    8 4. GENERAL DESCRIPTION The AI-900 Security System is a voice communication system that permits calls to be quickly and easily made - even in emergency situations - with the touch of single button. The system can record conversations, and features external equipment sync output and operation log output. These features combine to make the AI-900 an ...

  • Aiphone AI-900 - page 9

    9 7. SYSTEM CONFIGURA TION AND EQUIPMENT FUNCTIONS 7.1. System Configuration AI-900 Exchange (1) AI-900 Exchange (2) AI-900 Exchange (16) Rack Mount Panel AI-PN100B Main Frame AI-900MF/ Main Frame Mounting Bracket AI-YC303 Master station AI-MS900 (2 units) Recording voice output (for each station) Recording control output (for each station) Telepho ...

  • Aiphone AI-900 - page 10

    10 7.2. Equipment Functions • AI-900MF Main Frame The AI-900MF accommodates the following cards: Up to 2 AI-900MS or AI-900AL Cards (both cards may be mixed), up to 4 AI-900RS Cards, 1 AI-900CO Card, 1 AI-900AF Card, and 1 AI-900TI Card. The Main Frame has 2 RS-232C ports; one for programming and the other for operation log output. • AI-900MS M ...

  • Aiphone AI-900 - page 11

    11 8. AI-900MF MAIN FRAME NOMENCLA TURE AND FUNCTIONS 1 2 3 4 5 6 7 8 9 10 11 12 1. AC Input Connectors Connect to the AC output terminal of the AI-PU200 power transformer unit. (See p. 39.) 2. 24 V DC Input Connector Connects to a battery (24 V DC). (See p. 39.) 3. Power Switch Power is switched on (I) and off (O) with each depression of this swit ...

  • Aiphone AI-900 - page 12

    12 9. INST ALLA TION AND CONNECTION PR OCEDURES (1) System Design Exchange/Station Configuration, Wiring Schedule and Station Numbering Schedule (2) Equipment Installation Installing the AI-900MF Main Frame in an Equipment Rack or on a Wall (See p. 13.) Installing the AI-PU200 Power Transformer in an Equipment Rack or on a Wall (See p. 15.) Install ...

  • Aiphone AI-900 - page 13

    13 10. EQUIPMENT INST ALLA TION 10.1. AI-900MF Main Frame 10.1.1. Rack mounting Step 1. Attach the supplied rack mounting brackets to the frame. Mounting bracket Machine screw M4x10 (6 places) Step 2. Mount the frame to an equipment rack. Fiber washer (8 places) Rack mounting screw (tapping screw 5x12 , 8 places) ...

  • Aiphone AI-900 - page 14

    14 10.1.2. Wall mounting (Optional AI-YC303 Wall Mounting Frame is required.) Step 1. Mount the AI-YC303 bracket to the wall. Wood screw 5.1x38 Knockout (for wiring) Mounting dimensions 78 78 78 55.2 30 391.4 290 200 440.6 141.3 Step 2. Remove the AI-900MF's front panel, then mount the AI-900MF on the AI-YC303. Tapping screw 4x12 ...

  • Aiphone AI-900 - page 15

    15 10.2. AI-PU200 P ower T ransf ormer Unit 10.2.1. Rack mounting Step 1. Remove the 4 mounting screws, and attach the supplied wall mounting brackets to the transformer unit using the removed screws. Mounting screw W all mounting bracket Step 2. Attach the AI-PU200 to the AI-PN100B Rack Mount Panel. AI-PN100B AI-PU200 Machine screw (M3 x 8) Step 3 ...

  • Aiphone AI-900 - page 16

    16 10.2.2. Wall mounting Step 1. Remove the 4 mounting screws, and attach the supplied wall mounting brackets to the transformer using the removed screws. Mounting screw W all mounting bracket Step 2. Mount the transformer to the wall using the supplied wood screws. W ood screw 3.5 x 25 140 120 115 25 Unit: mm ...

  • Aiphone AI-900 - page 17

    17 10.3. AI-RS150, AI-RS160, AI-RS170 and AI-RS180 Substations Mount the substation to an electrical box mounted in the wall. AI-RS150/-RS160/-RS170/-RS180 Oval head screw UNC No.6x18 2-gang electrical box (deep) and adapter ring 46 120 52.5 * 2 * 2 43.5 (AI-RS150) * 1 2 (AI-RS150) 3 * 1 37 18.2 83.5 120 Unit: mm Dimensional diagram ...

  • Aiphone AI-900 - page 18

    18 10.4. Master Station 10.4.1. Desk-top mounting Connect the supplied modular-plug cord. 10.4.2. Wall mounting Pull out, rotate, and reset the cradle hook, then mount the station on the wall using the supplied wall mounting frame. Remove the cradle hook. ...

  • Aiphone AI-900 - page 19

    19 CR2032 BATT1 AI-900MF 11. AI-900MF CARD INST ALLA TION 11.1. Backup Battery Installation Caution All cards contain many CMOS ICs which are easily damaged by static electricity. Do not touch circuit components. • Insert the backup battery into the Main Frame mother board before installing any cards. Danger of explosion if battery is incorrectly ...

  • Aiphone AI-900 - page 20

    20 11.2. Card Installation Step 1. Remove each card from its static-protective bag, and install it in its designated position in the Main Frame. • For the AI-900TI, perform exchange number setting BEFORE installation. Refer to p. 38 "Exchange Number Setting." Step 2. After installing all cards, secure them using the supplied fixing brac ...

  • Aiphone AI-900 - page 21

    21 12. WIRING 12.1. Wiring from the Station or Outside Line Step 1. Remove the main frame's bottom panel as shown below. Step 2. Connect stations or outside lines to their respective cards as shown below. ...

  • Aiphone AI-900 - page 22

    22 12.2. Supplied Connector Connection Use the supplied connectors for exchange connections as follows. Step 1. Insert a cable into the connector and tighten the screw. Step 2. After cable connection is completed, press the connector onto the circuit board's connector. ...

  • Aiphone AI-900 - page 23

    23 12.3. AI-900MS Master Station Interface Card Connection 12.3.1. Master Station and AI-900MS connection • The AI-900MS can be interfaced with up to 2 AI-MS900 master stations. • Because up to 2 AI-900MS cards can be mounted in the AI-900MF Main Frame, up to four master stations can be connected per frame. • A station address must be assigne ...

  • Aiphone AI-900 - page 24

    24 [Connection] Use 2 twisted pair cables with a modular jack fitted at each one end to connect the AI-MS900 to the AI-900MS. Refer to the following table for the maximum recommended cable length between the two. Cable type AWG24 (0.52 mm) AWG22 (0.65 mm) AWG20 (0.82 mm) Distance 0.9 km 1.5 km 2.3 km Connect as shown below. AI-900MS and AI-MS900 co ...

  • Aiphone AI-900 - page 25

    25 12.3.2. External recording device and AI-900MS connection An external recording device can be connected to each master station line. [Connection] To connect the external recording device, use a twisted pair cable for voice output, and a twisted pair cable for control output. The voice output is 0 dB* and of unbalanced type. The control output is ...

  • Aiphone AI-900 - page 26

    26 12.4. AI-MS900 Master Station Connection and Adjustment 12.4.1. External speaker connection Follow the procedures below when connecting an external speaker (8 Ω ). Step 1. Remove the AI-MS900's rear terminal cover and set the internal slide switch to the [EXT. SP] position. Terminal cover EXT.SP terminal Microphone sensitivity control Int ...

  • Aiphone AI-900 - page 27

    27 12.5. AI-900AL T elephone Interface Car d Connection 12.5.1. Telephone and AI-900AL connection The AI-900AL can be interfaced with up to 2 commercial telephone sets. Use the telephone which complies with the FCC Regulation Part 68. [Connection] To connect the telephone set to the AI-900AL, use a twisted pair cable. The connector of the cable end ...

  • Aiphone AI-900 - page 28

    28 [Setting telephone's talking volume levels] When the talking volume is low, set it using the switch SW101 (for Line 1) or SW201 (for Line 2) on the AI-900AL card as illustrated below. Setting of telephone volume switches on the AI-900AL card AI-900AL SW101 SW201 D210 D110 CN1 Telephone volume switch Telephone's talking volume (Line 1) ...

  • Aiphone AI-900 - page 29

    29 12.5.2. External recording device and AI-900AL connection An external recording device can be connected to each telephone line. [Connection] To connect the external recording device, use a twisted pair cable for voice output, and a twisted pair cable for control output. The voice output is 0 dB* and of unbalanced type. The control output is an o ...

  • Aiphone AI-900 - page 30

    30 12.6. AI-900RS Substation Interface Card Connection 12.6.1. Substation and AI-900RS connection The AI-900RS can be interfaced with up to 16 substations. [Connection] Use a 2-core shield cable to connect the substation to the AI-900RS. Refer to the following table for the maximum recommended cable length between the two. Cable type AWG24 (0.52 mm ...

  • Aiphone AI-900 - page 31

    31 12.6.2. External amplifier and AI-900RS connection 1-core shielded cable 1 twisted pair cable AI-900RS CN1 CN5 Voice output Voice input HOT HOT GND GND (For paging amplifier) Paging amplifier * 1 GND COM COM 25V 70V 4 HOT INPUT OUTPUT Front view of the circuit board Electrical characteristics of the CN5 connector Voice output: Unbalanced, – 20 ...

  • Aiphone AI-900 - page 32

    32 12.7. AI-900CO Outside Line Interface Card Connection 12.7.1. Outside line and AI-900CO connection The AI-900CO can be interfaced with up to 2 outside lines. Using DTMF tone dialing, it is compatible with both loop and ground start systems. [Connection] Connect as shown below. Outside line and AI-900CO connection 1 twisted pair cable 1 twisted p ...

  • Aiphone AI-900 - page 33

    33 12.7.2. External recording device and AI-900CO connection An external recording device can be connected to each telephone line. [Connection] To connect the external recording device, use a twisted pair cable for voice output, and a twisted pair cable for control output. The voice output is 0 dB* and of unbalanced type. The control output is an o ...

  • Aiphone AI-900 - page 34

    34 12.8. AI-900AF A udio Function Card Connection 12.8.1. Amplifier and AI-900AF connection Paging can be provided through connected external amplifiers using the AI-900AF. [Connection] To connect the amplifier to the AI-900AF, use a twisted pair cable for voice output, and a twisted pair cable for control output. The voice output is 0 dB* and of u ...

  • Aiphone AI-900 - page 35

    35 12.8.2. External sound source and AI-900AF connection The External Sound Source Distribution function can be operated using the AI-900AF. [Connection] To connect external sound sources to the AI-900AF, use a twisted pair cable for voice input, and a twisted pair cable for control input (level-operated activation). The voice input is 0 dB* and of ...

  • Aiphone AI-900 - page 36

    36 12.9. AI-900TI Tie-Line Interface Card Exc hange Interconnection Up to 16 exchanges can be tie-line interconnected using the AI-900TI card. [Connection] To interconnect the exchanges, use 2 twisted pair cables for voice lines, and a 2-core shielded cable for data lines. A maximum of 4 voice lines can be connected. Refer to the following table fo ...

  • Aiphone AI-900 - page 37

    37 Connect as shown below. Exchange interconnection by means of AI-900TI 2 twisted pair cables 2 twisted pair cables 2 twisted pair cables 2 twisted pair cables 2 twisted pair cables 2 twisted pair cables 2 twisted pair cables 2 twisted pair cables 2-core shielded cable 2-core shielded cable AI-900TI CN1 CN2 CN3 CN4 CN6 AI-900TI CN1 CN2 CN3 CN4 CN6 ...

  • Aiphone AI-900 - page 38

    38 [Exchange Number Setting] When interconnecting the exchanges using the AI-900TI, assign the exchange number to each exchange with the SW1 switch located on the AI-900TI's circuit board. (Refer to the table below.) Exchange No. setting Initial status: Exchange No. 1 AI-900TI CN6 SW1 1 8 Exchange No. 1 1 2 3 4 5 6 7 8 OFF ON OFF ON OFF ON OFF ...

  • Aiphone AI-900 - page 39

    39 12.10. AI-900MF Main Frame and AI-PU200 P ower T ransf ormer Connection [Connection] Connect as shown below using 2 parallel pair cables. Use cables with a sufficient current capacity and a heavier gauge than AWG18. Two AI-PU200 units are required when using 3 or 4 AI-900RS cards. AI-900MF and power supply connection AI-900MF 24 V DC AI-PU200 To ...

  • Aiphone AI-900 - page 40

    40 13. MAIN FRAME AND PC CONNECTION 13.1. Programming PC Connection 13.1.1. Direct connection by means of RS-232C Using the RS-232C cable, connect the programming PC to the AI-900MF Main Frame as shown below. Direct connection by means of RS-232C (Programming PC) AI-900MF Main Frame AI-900MF Front view PC COM2 COM2 COM1 RS-232C straight cable RS-23 ...

  • Aiphone AI-900 - page 41

    41 13.1.2. Connection via modem Connect as shown below. Connection via modem (Programming PC) AI-900MF Modem Modem COM2 COM1 1 DCD 2 RXD 3 TXD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 RI 1 DCD 2 RXD 3 TXD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 RI RS-232C cross cable RS-232C cross cable Main Frame AI-900MF Front view ...

  • Aiphone AI-900 - page 42

    42 13.2. Operation Log PC Connection 13.2.1. Direct connection by means of RS-232C Using the RS-232C cable, connect the operating log PC to the AI-900MF as shown below. Direct connection by means of RS-232C (Operation log PC) AI-900MF PC COM2 COM1 RS-232C straight cable RS-232C straight cable 1 DCD 2 RXD 3 TXD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 RI 1 D ...

  • Aiphone AI-900 - page 43

    43 13.2.2. Connection via modem Connect as shown below. Connection via modem (Operation log PC) AI-900MF Modem Modem COM2 COM1 1 DCD 2 RXD 3 TXD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 RI 1 DCD 2 RXD 3 TXD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 RI RS-232C cross cable RS-232C cross cable Main Frame AI-900MF Front view 13.3. System Programming Use the supplied PC s ...

  • Aiphone AI-900 - page 44

    44 14. SPEECH AND FUNCTION TESTS Using installed equipment, perform both speech and function tests after system programming completion. 14.1. Speech T est (1) Calls from the substation • Call the Master Station (telephone) from each substation to check to be sure that a conversation is possible. Also, check to confirm that the master station (tel ...

  • Aiphone AI-900 - page 45

    45 Note: The design and specifications are subject to change without notice for improvement. • Accessories Power Source 20 V AC, 24 V DC Current Consumption 5.5 A Speech Path Configuration Time sharing switch (T1 stage) Serial port Complies with the RS-232C Standard, D-sub connector (9-pin, female), 2 ports Installation Method Rack- and wall-moun ...

  • Aiphone AI-900 - page 46

    46 Note: The design and specifications are subject to change without notice for improvement. • Accessories 2-pin dedicated connector .......................... 2 4-pin dedicated connector .......................... 2 Ferrite clamp SFC-10 ................................. 2 [AI-900AL T elephone Interface Car d] Power Source 5 V DC, 15 V DC, 24 V D ...

  • Aiphone AI-900 - page 47

    47 Note: The design and specifications are subject to change without notice for improvement. • Accessories 4-pin dedicated connector .......................... 4 [AI-900CO Outside Line Interface Card] Power Source 5 V DC, 15 V DC, 24 V DC (supplied from the main frame) Current Consumption 300 mA (5 V DC), 50 mA (15 V DC), 50 mA (24 V DC) Number o ...

  • Aiphone AI-900 - page 48

    Printed in Japan 133-06-239-30 Note: The design and specifications are subject to change without notice for improvement. • Accessories 4-pin dedicated connector .......................... 5 [AI-900TI Tie-Line Interface Card] Power Source 5 V DC, 15 V DC (supplied from the main frame) Current Consumption 100 mA (5 V DC), 50 mA (15 V DC) Number of ...

Fabricant Aiphone Catégorie Home Security System

Les documents que nous recevons du fabricant de l'appareilAiphone AI-900 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Aiphone
- manuels d’utilisations AI-900
- fiches produit Aiphone
- dépliants
- ou étiquettes-énergie Aiphone AI-900
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Aiphone AI-900.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Aiphone AI-900, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Aiphone AI-900. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Aiphone AI-900.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Aiphone AI-900, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Aiphone AI-900 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Aiphone AI-900.

Le manuel d’utilisation complet Aiphone, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Aiphone AI-900 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Aiphone AI-900, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lAiphone AI-900 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Aiphone AI-900 - qui devraient nous aider dans les premières étapes lors de l'utilisation Aiphone AI-900
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Aiphone AI-900
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Aiphone AI-900 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Aiphone AI-900?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Aiphone AI-900, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Aiphone AI-900 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)