Français dropdown-ico

Manuel d’utilisation Hitachi PW1

48 pages 0.76 mb
Télécharger

Aller à la page of 48

Summary
  • Hitachi PW1 - page 1

    USER'S MANUAL MANUEL UTILISA TEUR MANUAL DE USUARIO READ THE INSTRUCTIONS INSIDE CAREFULL Y . KEEP THIS USER'S MANUAL FOR FUTURE REFERENCE. For future reference, record the serial number of your monitor . SERIAL NO. The serial number is located on the rear of the monitor . This monitor is ENERGY STAR ® compliant when used with a computer ...

  • Hitachi PW1 - page 2

    1 ENGLISH USER'S MANUAL Thank you very much for purchasing the HITACHI Plasma Display Monitor. Before using your monitor, please carefully read the "SAFETY INSTRUCTIONS" and this "USER'S MANUAL" so you will know how to operate the monitor properly. Keep this manual in a safe place. You will find it useful in the future ...

  • Hitachi PW1 - page 3

    2 IMPOR T ANT SAFETY INSTRUCTIONS SAFETY POINTS YOU SHOULD KNOW ABOUT YOUR HITACHI PLASMA MONITOR Our reputation has been built on the quality, performance, and ease of service of HITACHI Plasma monitor. Safety is also foremost in our minds in the design of these units. To help you operate these products properly, this section illustrates safety ti ...

  • Hitachi PW1 - page 4

    3 ENGLISH IMPOR T ANT SAFETY INSTRUCTIONS Read before operating equipment Follow all warnings and instructions marked on this monitor. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation open ...

  • Hitachi PW1 - page 5

    4 Important Please read this User's Manual thoroughly, especially the Important Safety Instructions on Page 2 to 3 and 6 to 10. Mis-use may cause damage to your plasma monitor, which could shorten its lifespan, or cause injury to yourself. Should you encounter any difficulty in the set-up or operation of your monitor, firstly refer to the Trou ...

  • Hitachi PW1 - page 6

    5 ENGLISH CONTENTS IMPORTANT SAFETY INSTRUCTIONS ........2 FEATURES ....................................................4 SAFETY INSTRUCTIONS ..............................6 COMPONENT NAMES ................................11 Main Unit ............................................................................11 Remote control ..................... ...

  • Hitachi PW1 - page 7

    6 SAFETY INSTRUCTIONS This Plasma monitor has been designed and manufactured to meet international safety standards, but like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. Before using this product, please read and understand the Safety Instructions thoroughly to ensure correct usage ...

  • Hitachi PW1 - page 8

    7 ENGLISH SAFETY INSTRUCTIONS(continued) Be cautious of the power cord connection. Incorrect connection of the power cord could result in fire or electrical shock. • Do not touch the power cord with a wet hand. • Check that the connecting portion of the power cord is clean (with no dust), before using. Use a soft and dry cloth to clean the powe ...

  • Hitachi PW1 - page 9

    8 PRECAUTIONS • Installation environment Do not obstruct a ventilation hole. Do not put the monitor on carpet or blanket, or near a curtain which has a possibility of obstructing a ventilation hole of the monitor. Do not put the monitor in the following places. • Hot places such as near heater, place exposed to the direct rays of the sun. • A ...

  • Hitachi PW1 - page 10

    9 ENGLISH SAFETY INSTRUCTIONS(continued) • Prevention of an obstacle to Radio receivers This monitor has been designed pursuant to the international EMI standards. This is to prevent a problem to Radio receivers. - Keep the monitor away from Radio. - Adjust Radio antennas in order for the monitor not to receive interference. - The antenna cable o ...

  • Hitachi PW1 - page 11

    10 SAFETY INSTRUCTIONS(continued) • FCC (Federal Communications Commission) STATEMENT WARNING For model 42HDM70 WARNING : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in ...

  • Hitachi PW1 - page 12

    11 ENGLISH Caution when moving the main unit • As this product is heavy, whenever it is moved, two people are required to transport it safely. • Whenever the unit is moved it should be lifted forwards using the two handgrips at the back, and the unit should then be held at the base on both sides for stability. COMPONENT NAMES Front Cabinet (fro ...

  • Hitachi PW1 - page 13

    12 Remote control ID SET button 19 POWER OFF button 16 POWER ON button 16 POWER ON/OFF button 16 MENU button 19 MUTE button 17 VOLUME UP/DOWN buttons 17 RETURN button 19 RECALL button 18 AUTO button 19 PinP button 37 ID button 19 SELECT/ADJUST buttons 19 OK button 19 Loading Batteries 1. Open the battery cover. • Slide back and remove the battery ...

  • Hitachi PW1 - page 14

    13 ENGLISH Anti-tumble measures Securing to a wall or pillar Using a commercially available cord, chain and clamp, secure the set to a firm wall or pillar. Securing desktop 1) Using wood screws (two), fasten the set to the clamping screw holes on the rear of the stand as shown. 2) Using commercially available wood screws, secure the set firmly in p ...

  • Hitachi PW1 - page 15

    14 Read SAFETY INSTRUCTIONS ( to ) carefully to ensure maximum safety before proceeding to these steps: • Choose an appropriate site and install the product on a level table where the stand is secure. • Install the monitor to have ready access to a power socket available. • Make sure that the power switch of this device is turned off. 10 6 IN ...

  • Hitachi PW1 - page 16

    15 ENGLISH ① ① Connect the power cord to this device. ② ② Connect the power cord plug to the power outlet. (The type of plug is different from this drawing for some countries.) Connect the power cord, after completing all other connections. ① ② INST ALLA TION INSTRUCTIONS (continued) Power Cord Connection • Use only the power cord pro ...

  • Hitachi PW1 - page 17

    16 OPERA TING INSTRUCTIONS T ur ning Power On and Off • To turn the monitor power ON, press the main power switch on the monitor main unit to ON, and then press the SUB POWER button or the ON/OFF or ON button on the remote control. • To turn the monitor power OFF, press the SUB POWER button or the ON/OFF or OFF button on the remote control, and ...

  • Hitachi PW1 - page 18

    17 ENGLISH AV 1 AV 2 RGB 1 RGB 2 AV 3 MUTE VOL VOL AV 4 AUTO PinP OK SIZE RECALL MENU ID ID SET OPERA TING INSTRUCTIONS (continued) Audio Mute The audio volume can be temporarily mute by pressing the MUTE button of the remote control. • When a button is pressed, the volume adjustment status guide (magenta) will be displayed. • The volume settin ...

  • Hitachi PW1 - page 19

    18 Size Switching Each time the SIZE button of the remote control or the monitor is pressed, the screen display area will change in sequence and the status will be displayed at the bottom of the screen. * Real mode gives the image of the same shape as it is displayed on a computer monitor. This mode is only available for VGA (640 X 480) and WVGA (8 ...

  • Hitachi PW1 - page 20

    19 ENGLISH AV 1 AV 2 RGB 1 RGB 2 AV 3 MUTE VOL VOL AV 4 AUTO PinP OK SIZE RECALL MENU ID ID SET ID SET button ID button AUTO button Using the Menu Screen (On-screen display system) When the MENU button is pressed, the adjustment menu screen will be displayed; from there, PC signal adjustment and setting is possible by using the SELECT button, ADJUS ...

  • Hitachi PW1 - page 21

    20 PICTURE MENU OPERA TING INSTRUCTIONS (continued) Picture Audio T imer Function Setup Language Select OK Set Picture Contrast : + 31 Brightness : – 31 Color : 0 T int : + 31 Picture Enhancement : Off Color T emperature : Normal Color T emp.Adjust Reset Reset Select Set Return OK Picture Contrast : + 31 Brightness : – 31 Color : 0 Tint : + 31 ...

  • Hitachi PW1 - page 22

    21 ENGLISH Selected characters Setup hint Audio Mode Movie Music Speech Favorite Movie: This selects the audio suitable for Movie. Music: This selects the audio suitable for Music. Speech: This selects the audio suitable for News, Talk show etc. Favorite: This mode should be adjusted depending on user ’ s preference. Treble Suppresses treble. Enh ...

  • Hitachi PW1 - page 23

    22 Picture Audio T imer Function Setup Language Select OK Set Function Screen Saver Off Screen Wipe On 60Min. Black Side Panel Off Video Power Save Off Freeze Mode Split Default Zoom Panoramic Reset Reset Select Set Return OK MENU FUNCTION MENU Function Panel Life Normal Mode Display Off ID Number 1 Inverse On 60Min. Standby White Off Gamma 2.2 Res ...

  • Hitachi PW1 - page 24

    23 ENGLISH Selected characters Setup hint Auto Adjust* (Menu) Adjust Pressing the OK button here, Automatic regulation is started. Horizontal Position, Vertical Position, Horizontal Clock and Clock Phase are adjusted automatically. Horizontal Position Moves the horizontal position to left. Moves the horizontal position to right. Adjust the left-sid ...

  • Hitachi PW1 - page 25

    24 OPERA TING INSTRUCTIONS (continued) LANGUAGE MENU Picture Audio T imer Function Setup Language Select OK Set Language English Fran ç ais Espa ñ ol Select Return Exit OK MENU Select a language by ▼ ▲ SELECT buttons and press the OK button. OTHER FEA TURES Automatic Store Approximately 1 sec. after adjustment is completed, the adjustments wi ...

  • Hitachi PW1 - page 26

    25 ENGLISH Signal Check Status Display Action When Mode Display is set to ON, the input signal is switched or when the RECALL button is pressed. A guide is displayed for the input terminal and the horizontal and vertical sync frequency. When the sync signal is no longer detected. • A guide displays No Sync. Signal, and Power Save (for approx. 5 s ...

  • Hitachi PW1 - page 27

    26 NOTES About screen defects • High precision technology is used in the making of plasma panels but there may be dark spots (points that do not illuminate) and bright spots (points that are too bright) in some cases. These do not indicate a malfunction. About residual images • In some cases, residual images may remain after the short-term disp ...

  • Hitachi PW1 - page 28

    27 ENGLISH Symptoms That Seemingly Appear to be Failures Make the checks suggested below depending on the symptoms observed. If the symptoms remain uncorrected, contact your dealer. TROUBLESHOOTING Customer servicing can be hazardous. W ARNING Symptom Point to check See page • No picture with the power-indicating lamp off. • Check the way the p ...

  • Hitachi PW1 - page 29

    28 TROUBLESHOOTING (continued) Symptoms That Seemingly Appear to be Failures (continued) Symptom Point to check See page • The temperature of the display panel surface is high. • The plasma display panel is lighting the phosphors by the discharge of internal radiation. In some cases, this may cause the temperature of the panel surface to increa ...

  • Hitachi PW1 - page 30

    29 ENGLISH Depending on the kind of system equipment used, images may not be displayed normally. In this case, make the adjustments suggested below. (only for RGB2) Actions to Corr ect Abnor mal Displays Symptom 1 Text displayed across the screen appears vertically streaked, with some characters blurred (figure 1). The display image appears flowing ...

  • Hitachi PW1 - page 31

    30 Product specifications and designs are subject to change without notice. PRODUCT SPECIFICA TIONS • The monitor takes at least 30 minutes to attain the status of optimal picture quality. Signal Input RGB terminal (D-sub 15-pin connector) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 • When different kinds of input signals are simultaneously input to th ...

  • Hitachi PW1 - page 32

    31 ENGLISH Signal Input (continued) 12 3 4 5 6 7 8 91 0 1 1 1 2 1 3 1 4 1 5 1 6 17 18 19 20 21 22 23 24 PRODUCT SPECIFICA TIONS (continued) DVI terminal (DVI-D) Pin Input signal Pin Input signal 1 T.M.D.S. Data2- 14 +5V Power 2 T.M.D.S. Data2+ 15 Ground (for+5V) 3 T.M.D.S. Data2/4 Shield 16 Hot Plug Detect 4 T.M.D.S. Data4- 17 T.M.D.S. Data0- 5 T.M ...

  • Hitachi PW1 - page 33

    32 • The type of video board or connecting cable used may not allow for correct displays adjustment of Horizontal Position, Vertica l Position, Horizontal Clock and Clock Phase. • The monitor may fail to display an animation image correctly when a signal having a vertical frequency of 85Hz or higher is input to it. • The monitor differentiate ...

  • Hitachi PW1 - page 34

    33 ENGLISH SUPPLEMENT ...

  • Hitachi PW1 - page 35

    34 Optional Video Unit Function Additional functions when the optional video unit is installed are as follows: ( ) Monitor rear panel Speaker (R) Speaker (L) Power cord (1) Make sure that the power switch of the monitor is turned off. (2) Make sure that the power switch of the imaging device is turned off. (3) Use a commercially available cable and ...

  • Hitachi PW1 - page 36

    35 ENGLISH OPERA TING INSTRUCTIONS Input Switching AV1 AV 2 RGB 1 RGB 2 AV3 MUTE VOL VOL AV4 AUTO PinP OK SIZE RECALL MENU ･ ･ Input can be switched by pressing the AV1, AV2, AV3, AV4, RGB1 or RGB2 buttons of the remote control. ･ ･ Input can be switched in the sequence of AV1 → → AV2 → → AV3 → → AV4 → → RGB1 → → RGB2 by ...

  • Hitachi PW1 - page 37

    36 ATTENTION Using a wide-screen monitor • This monitor has a screen mode selection feature. If an incompatible screen mode is selected to play certain software, such as a TV program, the image would appear different from the original. Take this into consideration when making screen mode choices. • Use of this monitor in its enlarged display mo ...

  • Hitachi PW1 - page 38

    37 ENGLISH OPERA TING INSTRUCTIONS (continued) Displaying MUL TI PICTURE If the PinP button on the remote control is pressed MULTI PICTURE will display. Activating the P-in-P mode from the RGB input screen Pressing the PinP button one time will display 2 pictures. • This mode can be available from RGB1(DVI-PC) and RGB2(RGB) input. • The speaker ...

  • Hitachi PW1 - page 39

    38 Picture Audio Time r Function Setup Language Select OK Set Picture Picture Mode Day Contrast +31 Brightness -31 Color 0 Sharpness +15 Tint 0 Color T emperature Normal Contrast Mode Normal Reset Reset Select Set Return OK OK MENU Picture Day YNR Off CNR Off Film Mode On P AL Comb Filter On L TI Off CTI Off Black Enhancement Off Auto Color Off Res ...

  • Hitachi PW1 - page 40

    39 ENGLISH OPERA TING INSTRUCTIONS (continued) PICTURE MENU (continued) Selected characters Setup hint Picture Mode Day Night Day: This setting is best for very bright ambient lighting. Night: This setting is for normal lighting conditions. Contrast Narrows the gap between brightness and darkness. Broadens the gap between brightness and darkness. A ...

  • Hitachi PW1 - page 41

    40 OPERA TING INSTRUCTIONS (continued) PICTURE MENU (continued) Selected characters Setup hint Color Management Off On Turn On when the original balance of each color is required to adjust depending on the user ’ s preference. Magenta Magenta is weakened. Magenta is strengthened. This adjusts listed colors individually to make them either deeper ...

  • Hitachi PW1 - page 42

    41 ENGLISH OPERA TING INSTRUCTIONS (continued) SETUP MENU Picture Audio Tim er Function Setup Language Select OK Set Setup System System 2 Color System Video Input Audio Input Scart Output Monitor RGB1 DVI-STB RGB2 Component HDTV Select Set Return OK Setup System System 2 Color System Video Input Audio Input Scart Output Monitor RGB1 DVI-STB RGB2 C ...

  • Hitachi PW1 - page 43

    42 OPERA TING INSTRUCTIONS (continued) SETUP MENU (continued) Selected characters Setup hint Audio Input AV1 Stereo L/Mono This should correspond to the audio signal from the equipment that is connected to AV1 audio input terminal. If it is monaural audio, set this to L/Mono. AV2 (Same to AV1) AV3 AV4 Scart Output Not Available (grayed out) RGB1 DV ...

  • Hitachi PW1 - page 44

    43 ENGLISH Make the checks suggested below depending on the symptoms observed. If the symptoms remain uncorrected, contact your dealer. Customer servicing can be hazardous. W ARNING Symptom Point to check See page • The screen becomes dark and the images cannot be seen during VCR special playback (fast forward, rewind). • This sometimes occurs ...

  • Hitachi PW1 - page 45

    44 PRODUCT SPECIFICA TIONS (continued) Signal Input ① ② ③ ④ S-input connector pin specifications Pin Input signal 1 Y 2 Y-GND 3 C 4 C-GND Frame GND 20 18 16 14 12 10 8 6 4 2 21 19 17 15 13 11 9 7 5 31 Scart connector pin specifications Pin Signal Pin Signal 1 AUDIO OUT (RIGHT) 12 Not Used 2 AUDIO IN (RIGHT) 13 RGB-R GND 3 AUDIO OUT (LEFT/MO ...

  • Hitachi PW1 - page 46

    45 ENGLISH Recommended Signal List PRODUCT SPECIFICA TIONS (continued) With Digital RGB signal input (RGB1 input) ( ○ : acceptable) No. Signal mode Horizontal frequency (kHz) Dot clock frequency (MHz) Setup Menu Condition Remarks Signal Name Resolution Vertical frequency (Hz) DVI-PC DVI-STB 1 VGA 640 X 400 70.08 31.47 25.18 ○ 2 640 X 480 59.94 ...

  • Hitachi PW1 - page 47

    NOTE: The information in this manual is subject to change without notice. The manufacturer assumes no responsibility for any errors that may appear in this manual. TRADEMARK ACKNOWLEDGEMENT VGA and XGA are registered trademarks of International Business Machines Corporation. APPLE and Macintosh are registered trademarks of Apple Computer , Inc. VES ...

  • Hitachi PW1 - page 48

    QR58563 Printed in Japan Hitachi America, L TD. Home Electronics Division 900 Hitachi W ay . Chula Vista, CA 91914, U.S.A. T el: +1-800-HIT ACHI (+1-800-448-2244) Hitachi Canada, L TD. Digital Media Division 6740 Campobello Road. Mississauga, ON L5N 2L8, CANADA T el: +1-800-HIT ACHI (+1-800-448-2244) ...

Fabricant Hitachi Catégorie Computer Monitor

Les documents que nous recevons du fabricant de l'appareilHitachi PW1 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Hitachi
- manuels d’utilisations PW1
- fiches produit Hitachi
- dépliants
- ou étiquettes-énergie Hitachi PW1
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Hitachi PW1.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Hitachi PW1, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Hitachi PW1. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Hitachi PW1.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Hitachi PW1, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Hitachi PW1 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Hitachi PW1.

Le manuel d’utilisation complet Hitachi, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Hitachi PW1 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Hitachi PW1, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lHitachi PW1 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Hitachi PW1 - qui devraient nous aider dans les premières étapes lors de l'utilisation Hitachi PW1
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Hitachi PW1
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Hitachi PW1 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Hitachi PW1?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Hitachi PW1, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Hitachi PW1 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)