Français dropdown-ico

Manuel d’utilisation Sitecom WL-130

32 pages Non applicable
Télécharger

Aller à la page of 32

Summary
  • Sitecom WL-130 - page 1

    Wireless Range Extender WL-130 Full Manual ...

  • Sitecom WL-130 - page 2

    Table of Contents 1. Introduction .................. .................... ................... ................... ........ 1 Package Contents ........... ............ ............ .............. ............ ........... ............ ............ ............ ........... ........ .... ............ ..... 2 Features ........... ............ .......... ...

  • Sitecom WL-130 - page 3

    Introduction 1 1. Introduction This product is an access point for IEEE 802. 11g/ b 2.4GHz wireless network. You can use this access point to build up a wireless LAN. Any wi reless LAN station can j oin the wireless network by using the “Infrastructu re Mode”. Another option is the Universal Repeater mode w ith which you can extend the range of ...

  • Sitecom WL-130 - page 4

    Introduction 2 Package Contents T he Access Point inc ludes the following item s:  One Access Point with an tenna  One Power Adapter  One User’s Manual Features  Complies with the IEEE 802.11b/g (DSSS) 2.4GHz speci fication.  High data rate 54Mbps network speed.  Seamless ly integrate wireless and wire d Ethernet LAN networks. ? ...

  • Sitecom WL-130 - page 5

    Introduction 3 2. Physical Description Front Panel On the Access Point’s front pane l there are LED lights that in form you of the Access Point’s current status. Below is an explanation of each LED. LED Color Status Description Lit Po wer is supplie d. Power Green Off No Power. Flash Antenna is transmitting or receiving data. WLAN Green Off Ant ...

  • Sitecom WL-130 - page 6

    Introduction 4 Back Panel Access Point’s connection ports are located on the back panel. Below is the description of each connection port.  Antenna Connector: This round connection is standard Reverse SMA connector where any antenna wit h Reverse SMA connector can connec t to the Access Point.  DC Adapter Port Insert the power jack of the p ...

  • Sitecom WL-130 - page 7

    Wireless Range Extender (WL-130) Configuration 5 3. Hardware installation Use the WL-130 as an Access Point 1. Locate an optimum l ocation for the WL-130 . The best location for your Access Point is usually at th e center of your wireless network, with line of sight to all of your mobile stations. 2. Connect the WL-130 to your ro uter, hub or switc ...

  • Sitecom WL-130 - page 8

    Wireless Range Extender (WL-130) Configuration 6 4. Wireless LAN Acce ss Point Configura tion This Acce ss Point prov ides a web-ba sed configu ration tool allowing you to configure from wired or wireless stations. Foll ow the instructions below to get started configuration. From Wired Station 1. Make sure your wired station is in the same subnet a ...

  • Sitecom WL-130 - page 9

    Wireless Range Extender (WL-130) Configuration 7 1b) Windows XP 1: Click the Start button and select Settings , then click Network Connections. The Net work Connections window will appear. 2: Double-click Local Area Conn ection icon. The Local Area Connec tion window will appear. 3: Check your li st of Network Components. You should see Intern et P ...

  • Sitecom WL-130 - page 10

    Wireless Range Extender (WL-130) Configuration 8 2. Enter 192.168.0.254 in the address bar of your we b browser to access the Universal Repeaters configurat ion page. 3. A screen will pop up and request you to en ter a user name and passw ord. Enter the following: User Name: admi n Password: ad min Enter the def ault user name and p assword, then p ...

  • Sitecom WL-130 - page 11

    Wireless Range Extender (WL-130) Configuration 9 5. Configuring the WL-130 Every time when you have finished modifying a setting page and click “Apply” button, this page will pop-up. Th e settings have been successfully saved but will not take effect immediately. You have to restart the access po int to make the new settings take effect. You ca ...

  • Sitecom WL-130 - page 12

    Wireless Range Extender (WL-130) Configuration 10 Status and Information On this screen, you can see the general informat ion of the Ac cess Point inc luding Alias Name, Firmware Version, ESSID, Channel Number, Status, IP Address, MAC Addr ess, etc. Using the “Choose your Lan guage” box it’s possible to change the langu age of the WL-130 inte ...

  • Sitecom WL-130 - page 13

    Wireless Range Extender (WL-130) Configuration 11 Wireless Setting This Access Point su pports AP, WDS and Univer sal Repeater modes. “Accesspoint” provi des pure access point function. The simplest way to build up a wireless LAN is to use “Accesspoint”. If you want an access point to bridge wired E t hernet network and provide conn ection ...

  • Sitecom WL-130 - page 14

    Wireless Range Extender (WL-130) Configuration 12 AP Bridge-WDS mode setting p age: ...

  • Sitecom WL-130 - page 15

    Wireless Range Extender (WL-130) Configuration 13 Universal Repe ater mode sett ing page: Parameter Description ESSID The ESSID (up to 31 printable ASCII characters) is the unique name identi fied in a WLAN . The ID preven ts the unintent ional merging of two co -located WLAN s. Please make sure th at the ESSID of all stations in the same WLAN netw ...

  • Sitecom WL-130 - page 16

    Wireless Range Extender (WL-130) Configuration 14 address to act as a station to co nnect to another pee r or access point. You also can click “Clone MAC” button to let this device copy the MAC address of the PC you are using to configure this device. Root AP SSID In “ Unive rsal R epea ter m ode”, th is device can act as a stat ion to conn ...

  • Sitecom WL-130 - page 17

    Wireless Range Extender (WL-130) Configuration 15 “A-F”, “a-f” and “0-9” range) to be the WEP Key. For example: ASCII Characters: guest Hexadecimal Digits: 12345abcd e WEP Key This is only us ed when you select “WEP 64bits” or “WEP 128bits” encryption method. Th e WEP key is used to encrypt data transmitted between the br idged ...

  • Sitecom WL-130 - page 18

    Wireless Range Extender (WL-130) Configuration 16 Parameter Description MAC Address MAC address of this active wireless station. Tx Packet The number of transmitted packets that are sent out from this active wireless station. Rx Packet The number of r eceived packets that are received by th is active wireless station. TX Rate The transmission rate ...

  • Sitecom WL-130 - page 19

    Wireless Range Extender (WL-130) Configuration 17 Security This Access Point provides complete wirele ss LAN security functions, include WEP, IEEE 802.11x, IEEE 802.1 1x with WEP, WPA with pre-shared key and WPA with RADIUS. With these security functions, you can prevent your wi rele ss LAN from ill egal access. Please make sure your wireless stati ...

  • Sitecom WL-130 - page 20

    Wireless Range Extender (WL-130) Configuration 18 Parameter Description Key Length You can select the 64 or 128-bit key to encrypt transmitted data. Larger WEP key length will provide higher level of security, but the throughpu t will be lower. Key Format You may select to select ASCII Characters (alphanumeric format) or Hexadecimal Di gits (in the ...

  • Sitecom WL-130 - page 21

    Wireless Range Extender (WL-130) Configuration 19 WPA pre-sh ared key Wi-Fi Protected Access (WPA) is an advanced security standard. You can use a pre-shared key to authenticate wireless stations and encrypt da ta during communication. It uses TKIP or CCMP(AES) to change t he encryption key freque ntly. So the encryption key is not easy to break. T ...

  • Sitecom WL-130 - page 22

    Wireless Range Extender (WL-130) Configuration 20 transmitted in the wireless n etwork. Fill the text box by following the rules below. Hex: input 64-digi t Hex values (in the “A-F”, “a-f” and “0-9” range) or at least 8 character pass phrase as the pre-shared keys. Click the Apply button at the bottom of the screen to save the above con ...

  • Sitecom WL-130 - page 23

    Wireless Range Extender (WL-130) Configuration 21 peer automatically. RADIUS Server IP address The IP address of exter nal RADIUS server. RADIUS Server Port The service port of the external RADIUS server. RADIUS Server Password The password used by external RADIUS server. Click the Apply button at the bottom of the screen to save the above configur ...

  • Sitecom WL-130 - page 24

    Wireless Range Extender (WL-130) Configuration 22 Advanced Setting You can set advanced parameters of this access point. The parameters include Authen tication Type, Fragment Threshold, RTS Th reshold, Beacon Interval, Tx Operation Rate, Tx Basic Rate, Preamble Ty pe, Broadcast ESSID. You sho uld not change these parameters unless you know what eff ...

  • Sitecom WL-130 - page 25

    Wireless Range Extender (WL-130) Configuration 23 Beacon Interval The interval of ti me that this access point broadcast a b eacon. Beacon is used to synchronize the wir eless network. Data Rate The “Data Rate” is the rate this access point uses to tr ansmit data packets. The access poi nt will use th e highest possi ble selected trans mission ...

  • Sitecom WL-130 - page 26

    Wireless Range Extender (WL-130) Configuration 24 System Utility From here, you can define the Access Point’s IP Address and Login Password an d enable the Access Point to be a DHCP Server. Parameter Description Current Password Enter the current password (u p to 15-digit alphanumeric string) of the Access Point. The default password for the Acce ...

  • Sitecom WL-130 - page 27

    Wireless Range Extender (WL-130) Configuration 25 Subnet Mask Specify a Subnet Mask for your LA N segment. The Subnet Mask of the Ac cess Point is f ixed and t he va lue is 255.255.255.0 . Gateway Address The IP address of the default ga teway of the subnet that this access point resides in. It allows this access poin t be accessed by PC from a def ...

  • Sitecom WL-130 - page 28

    Wireless Range Extender (WL-130) Configuration 26 Back-up The back-up screen allo ws you to save ( Backup ) the Access Poin t’s current configuration setting. Saving the configuration settings pr ovides an added protection and convenience should problems occur with the Access Point and you have to reset to factory default. When you save the confi ...

  • Sitecom WL-130 - page 29

    Wireless Range Extender (WL-130) Configuration 27 Firmware Upgrade This page allows you to upgrade the Access Point’s firmware. Parameter Description Firmware Upgrade This tool allows you to upgr ade the Access Point’s system firmware. To upgrade the firmware of your Access Point, you need to download the firmware f ile to your local hard disk, ...

  • Sitecom WL-130 - page 30

    Wireless Range Extender (WL-130) Configuration 28 Reset You can reset the Access Point’s system shou ld any problem exist. The reset functi on essentially Re-boots your Access Point’s system. Parameter Description Reset In the event that the system stops responding cor rectly or in some way stops functioning, yo u can perform a reset. Your set ...

  • Sitecom WL-130 - page 31

    Troubleshooting This chapter provides solutions to problem s usually encou ntered during the installati on and operation of the Access Point, and answ ers to some f requently asked question s. How to manually find your PC’s IP and MAC Address? 1) In Windows, open the Command Prompt program 2) Type Ipc onfig /all and Enter  Your PC’s IP addre ...

  • Sitecom WL-130 - page 32

    Federal Communication Com mission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device , pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can ...

Fabricant Sitecom Catégorie Wifi repeater

Les documents que nous recevons du fabricant de l'appareilSitecom WL-130 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Sitecom
- manuels d’utilisations WL-130
- fiches produit Sitecom
- dépliants
- ou étiquettes-énergie Sitecom WL-130
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Sitecom WL-130.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Sitecom WL-130, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Sitecom WL-130. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Sitecom WL-130.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Sitecom WL-130, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Sitecom WL-130 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Sitecom WL-130.

Le manuel d’utilisation complet Sitecom, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Sitecom WL-130 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Sitecom WL-130, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lSitecom WL-130 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Sitecom WL-130 - qui devraient nous aider dans les premières étapes lors de l'utilisation Sitecom WL-130
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Sitecom WL-130
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Sitecom WL-130 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Sitecom WL-130?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Sitecom WL-130, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Sitecom WL-130 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)