-
Grizzly H7679 - page 1
COPYRIGHT © JUNE, 2005 BY GRIZZLY INDUSTRIAL, INC. REVISED DECEMBER, 2007 (TS) WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. #TR7348 PRINTED IN CHINA 2 " N A I L E R K I T MODEL H7679 INSTRUCTION MANUAL ...
-
Grizzly H7679 - page 2
Safety Instructions For Pneumatic Tools 1. KEEP ALL SAFETY DEVICES IN PLACE and in working order. 2. REMOVE ADJUSTING KEYS AND WRENCHES . Form habit of check- ing to see that keys and adjusting wrenches are removed from tool before operation. 3. KEEP WORK AREA CLEAN . Cluttered areas and benches invite accidents. 4. DO NOT USE IN DANGEROUS ENVIRONM ...
-
Grizzly H7679 - page 3
H7679 2" Nailer Kit -1 - 10. USE PROPER AIR HOSE for the tool. Make sure your air hose is in good condition and is long enough to reach your work without stretching. 11. WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neck - ties, rings, bracelets, or other jew- elry which may get caught in moving parts. Non-slip footwear is recom- me ...
-
Grizzly H7679 - page 4
H7679 2" Nailer Kit -2 - 1. HAND INJURIES: Do not place your hands near the nail point of entry. A nail can deflect and tear through the surface of the workpiece, puncturing your hand or fingers. 2. COMBUSTIBLE GASES: Never connect the nailer to pressurized oxygen or other combustible gases as a power source . Only use fil- tered, lubricated, ...
-
Grizzly H7679 - page 5
H7679 2" Nailer Kit -3 - Operating this nailer can propel objects into the air, causing imme- diate eye damage. To protect your- self, always wear American National Standards Institute (ANSI) approved safety glasses or goggles when oper- ating this equipment. In addition, this nailer discharges at up to 90 deci- bels. To protect your hearing, ...
-
Grizzly H7679 - page 6
H7679 2" Nailer Kit -4 - INTRODUCTION If you have any c omme nts reg ard ing th is man ual, pl ease w rite to u s at the follow ing add ress : Grizzly Industrial, Inc. C/O Technical Documentation Manager P.O. Box 2069 Bellingham, WA 98227-2069 Mo st im por t antl y , we sta nd b ehin d ou r too ls. If you have any ser vi ce que stio ns or par ...
-
Grizzly H7679 - page 7
H7679 2" Nailer Kit -5 - SET UP Figure 1. Model H7679 inventory. Unpacki ng Y our M ode l H7679 l ef t o ur w areho use in a car efull y pac ked box. If you d isc over th e n ail er i s d am age d af te r yo u h ave sig ned for de liver y , pl ease i mmed iate ly cal l C ustom er S ervic e a t ( 5 70 ) 546 - 96 63 for advic e. Save t he cont a ...
-
Grizzly H7679 - page 8
H7679 2" Nailer Kit -6 - Compressed Air Sy stem The Mo del H7679 is des igne d t o b e o per- ated at 60 –1 0 0 PSI using cl ean, dr y , reg u- late d, c ompr esse d ai r . D O N OT exc ee d th e max imum op er ati ng pre ssu re for your mod el . Befo re u sing your new na iler, reg ulate the air pr essu re on you r air co mpre ssor t o the ...
-
Grizzly H7679 - page 9
H7679 2" Nailer Kit -7 - Safety Nose Mechanism A s afet y me chan ism on th e no se o f th e nai ler prote ct s again st ac cid enta l firi ng. Whe n t he t rig ger is press ed, the nai ler will not fire unti l th e sa fety nos e me cha nism is de press ed. Befo re you us e yo ur n ailer for the f irst tim e, c hec k th e sa fety nos e me cha ...
-
Grizzly H7679 - page 10
H7679 2" Nailer Kit -8 - OPERATIONS Loadin g Figure 3. Sliding magazine pusher back and locking catch lever in place. When replacing nails in your Model H7679, follow these guidelines: Gauge: 18 Length: 3 ⁄ 8 " – 2" Capacity: 100 To load your nailer: 1. DISCONNECT NAILER FROM THE AIR SUPPLY! 2. Sliding magazine pusher back, as sh ...
-
Grizzly H7679 - page 11
H7679 2" Nailer Kit -9 - Figure 6. Depth adjustment controls. A depth adjustment knob is attached to the nose for setting the nail depth. To adjust the dep th: 1. DISCONNECT NAILER FROM THE AIR SUPPLY! 2. Rotate the adjustment knob ( Figure 6 ) clockwise to drive the nails deeper or counterclockwise to drive the nails shallower. 5. Pull the tr ...
-
Grizzly H7679 - page 12
H7679 2" Nailer Kit -10 - A jammed nail m ust be cleared before using the nailer again. To clear a jammed nail from the dis- charge area: 1. DISCONNECT NAILER FROM THE AIR SUPPLY! 2. U nlatch and pull the magazin e all the way back. 3. R emove the nail stick from the maga- zine. Cleari ng Jammed Nails Figure 7. Nose opened to clear a jam. Nose ...
-
Grizzly H7679 - page 13
H7679 2" Nailer Kit -11 - Replacin g Pist ons / O - Rin gs If yo u use your naile r day i n an d day out , re pair pisto ns are c heap insu ranc e agai nst wa sted do wn tim e and los t profi ts, in t he event t hat a p isto n or p iston sh aft bec ome s wo rn o ut. Th e pis ton r ep air k it p ar t num be r for th e Mo del H 767 9 i s # P H76 ...
-
Grizzly H7679 - page 14
H7679 2" Nailer Kit -12 - CLEANING & LUBRICATION Cleanin g Use a go od so lvent to c lean t he n ose ass emb ly of the nai ler . Al ways be sure tha t th e na iler is dr y b efore usi ng i t ag ain. Do n ot all ow dus t, c hips , san d, etc. int o the ai r c onne cto rs or into t he b ody of t he nai ler; t his may re sult in le aks an d d ...
-
Grizzly H7679 - page 15
H7679 2" Nailer Kit -13 - H7679 PARTS BREAKDOWN ? ...
-
Grizzly H7679 - page 16
H7679 2" Nailer Kit -14 - H7679 PARTS LIST REF PART # DESCRIPTION REF PART # DESCRIPTION 1 PH7679001 BALL (DW=2.5) 44 PH7679044 SEAL COVER 2 PH7679002 COMPRESSED SPRING A 45 PSB38M CAP SCREW M5-.8 X 25 3 PH7679003 SPECIAL BOLT 46 PH7679046 TORSION SPRING 4 PH7679004 COMPRESSED SPRING 47 PH7679047 PIN C4 X 12 5 PH7679005 AIR DEFLECTOR 48 PH7679 ...
-
Grizzly H7679 - page 17
H7679 2" Nailer Kit -15 - TROUBLESHOOTING Symptom Possible Cause Solution Air leaking at trig- ger valve area. 1. O-rings in trigger valve hous- ing are damaged. 1. O-rings must be replaced & operation of safety nose must be checked. Air leaking between housing and hose. 1. Loose screws in housing. 2. Damaged O-ring. 3. Loose air fitting. ...
-
Grizzly H7679 - page 18
Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance. This is Grizzly’s sole written warranty and any and all warr ...
-
Grizzly H7679 - page 19
WARRANTY CARD Name _________________________________________________________________ Street _________________________________________________________________ City _______________________ State _________________________ Zip _________ Phone # ____________________ Email ________________________ Invoice # _____ Model # ____________________ Order # ____ ...
-
Grizzly H7679 - page 20
FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 TAPE ALONG EDGES--PLEASE DO NOT STAPLE Name________________________________ Street________________________________ City______________State______Zip_______ Send a Grizzly Catalog to a friend: Place Stamp Here ...
Avez-vous une question à propos de Grizzly H7679?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec Grizzly H7679, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Grizzly H7679 il est probable qu’il a envie de partager la façon de le résoudre.