Français dropdown-ico

Manuel d’utilisation Renesas M3S-UFLA32R

37 pages 1.44 mb
Télécharger

Aller à la page of 37

Summary
  • Renesas M3S-UFLA32R - page 1

    Rev.1.40 Revision Date: Mar. 06, 2007 M3S-UFLA32R User’s Manual UART Flash Memory Programming Utility RE J 1 0 B 0 2 3 9 - 0 14 0 All information contained in these materials, including products and product specifications, represents information on the product at the time of publication and is subject to change by Renesas Technology Corp. without ...

  • Renesas M3S-UFLA32R - page 2

    1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any ...

  • Renesas M3S-UFLA32R - page 3

    Precautions on Using The Product Described Herein 1. The product describe d herein should be used in com bination with the p arts included w ith the starter kit. If the product is operated in com bination with any oth er item, its operat ion cannot be guaranteed. Nor will requests for help or suggestion be answered. 2. The pr oduct described herein ...

  • Renesas M3S-UFLA32R - page 4

    Contents-1 Contents 1. Ov erview ................................................................................................................... .... 1 2. System C onfigurat ion .................................................................................................... 1 2.1 Outline of the M3S-UFLA32R................................... ...

  • Renesas M3S-UFLA32R - page 5

    M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 1 of 30 1. Overview This user ’ s manual is intended to provide ex plan ations ab out system configuration and operation method of the UA RT Flash Mem ory Programmin g Utility M3 S-UFLA32R V er .1.40 (herein after referred to as M3S-UF LA32R) for the M32 R ...

  • Renesas M3S-UFLA32R - page 6

    M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 2 of 30 2.2 Communication Cable (M3A-2145G50) Communication ca ble consists of two d ifferent cable s below . •Interface Cable (M3A-2145G 02) It is a conversion cable to connect to the test pi ns o n the target when the connectio n cable for the MF-TEN-NIN ...

  • Renesas M3S-UFLA32R - page 7

    M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 3 of 30 RJJ99J0021-0100 Figure 2.2.2 MF-TEN-NINE Cable Connecting Diagram ...

  • Renesas M3S-UFLA32R - page 8

    M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 4 of 30 T able 2.2.1 Usage S pecification Rated V alue Parameter MIN MAX Unit Condition 3.0 3.6 V Target Supply Voltage DC Power Supply 4.5 5.5 V Target Supply Voltage RS-232C Communication R ate 9600 115200 bps Communication Speed with PC Consumption Curren ...

  • Renesas M3S-UFLA32R - page 9

    M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 5 of 30 3. Instal lation of the M3S-UFLA32R 3.1 Installation of the M3S-UFLA32R T o install the M3S-UFLA32R, perform the following steps. 1) Execute Setup.exe in " ¥Eng¥T ool¥Ufla32r¥W95E" folder contained in the provided CD. (Not e1) 2) Contin ...

  • Renesas M3S-UFLA32R - page 10

    M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 6 of 30 4. Operation Method of the M3S-UFLA32R 4.1 S tartup Double-click the ic on after the M3S-U FLA32R setup is complet ed. 4.2 Exit Choose [ Exit(X )] fr om [File(F )] menu. 4.3 Operation Outlin e of the M3S-UFLA32R T o write to the flash memory , perfor ...

  • Renesas M3S-UFLA32R - page 11

    M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 7 of 30 4) Reset the T arget MCU Reset the target MCU by pressing th e reset switch on the targ et board. 5) S tarting the M3S-UFLA32R Start the M3S-UFLA32R. 6) Execution of Writing to the Flash Memory by the M3S-UFLA3 2R Operate the M3S-UFLA32R and perform ...

  • Renesas M3S-UFLA32R - page 12

    M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 8 of 30 5. Function Description of the M3S-UFLA32R 5.1 Function List T able 5.1 lists functions of the M3S-U FLA32R. Choose each function from menu or click a button for execution. T able 5.1 Function List Menu Button Function Reference Load Refer Read the p ...

  • Renesas M3S-UFLA32R - page 13

    M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 9 of 30 5.2 Program Data (Motorol a S-format file) Selection (1) Choose [Load(L )] from [File(F )] menu or click [Refer] button. Figure 5.2.1 Program Data Selection (2) When “Open File” dialog opens, cho ose a program data file (Motorola S-form at file) ...

  • Renesas M3S-UFLA32R - page 14

    M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 10 of 30 (3) Choose a file to display the dialog that shows ex ecution process, and then re ad program dat a file into the internal buf fer . After com pleting read, the dialog is closed and file nam e is displayed in "File Name:" box. Figure 5.2.3 ...

  • Renesas M3S-UFLA32R - page 15

    M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 1 1 of 30 5.4 Lock Bit Information (1) Choose [Lock Bit Information (L )] from [Display(V )] menu to displ ay the dialog that shows execution process, and then read lock bit. After completing read of lock bit, the dialog is close d and "Lock Bit S tatus ...

  • Renesas M3S-UFLA32R - page 16

    M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 12 of 30 (3) In [Lock Bit S t atus Display] dialog, the lock bit stat uses of all blocks of curr ently selecte d MCU are displayed . Click [OK] to close "Lock Bit S tatus Display" dialog. Figure 5.4.3 Lock Bit St atus Display Dialog ...

  • Renesas M3S-UFLA32R - page 17

    M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 13 of 30 5.5 Program (1) Choose [Program(P )] from [Device(D )] menu or click [Program] button to display the dialog that shows execution proce ss, and then write program dat a stored in the interna l buf fer to the flash memory . Af ter completing write of ...

  • Renesas M3S-UFLA32R - page 18

    M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 14 of 30 5.6 Erase (1) Choose [Erase(E )] from [ Device(D )] menu or click [Erase] button to displ ay the dialog that shows execution process, and then erase the flash memory . After completing the flash memory erasing, the dialog is closed and "Erase ? ...

  • Renesas M3S-UFLA32R - page 19

    M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 15 of 30 5.7 Block Erase (1) C hoose [Block Er ase(L )] from [Device(D )] menu to display "Block Erase" dialog. Figure 5.7.1 Block Erase (2) In "Block Erase" dialog, all blocks of currently selected MCU are displayed . Click [Select All] ...

  • Renesas M3S-UFLA32R - page 20

    M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 16 of 30 (3) Click [OK] in the "Block Erase…finish" dialog to close the dialog. Figure 5.7.3 Block Erase Finish Dialog ...

  • Renesas M3S-UFLA32R - page 21

    M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 17 of 30 5.8 Lock Bit/Set (1) Choose [Lock Bit]-[Set(S )] from [Device(D )] menu to display the dialog t hat shows execution process, and then read out lock bit. After completing read of lock bit, the dialog is closed and "Lock Bit Set" dialog is d ...

  • Renesas M3S-UFLA32R - page 22

    M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 18 of 30 (2) In "Lock Bit Set" dialog, the blocks without setting of lock bit are displayed. Click [Select All] to select all blocks. Click [Clear] to clear all selected blocks. Select the blocks you wish to set lock bit to, and then clic k [OK] to ...

  • Renesas M3S-UFLA32R - page 23

    M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 19 of 30 5.9 Lock Bit/Enable (1) Choose [Lock Bit]-[Enable(E )] from [ Device(D )] menu to display the dialog that shows execution process, and then enable lock bit. After completing enabli ng lock bit, the dialog is closed and "Lock Bit Enable…finish ...

  • Renesas M3S-UFLA32R - page 24

    M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 20 of 30 5.10 Lock Bit/Disable (1) Choose [Lock Bit]-[Disable(D )] from [Device(D )] menu to display the dialog that shows ex ecution process, and then di sable lock bit. After completing disabling lock bit, the dialog is closed and "Lock Bit Disable… ...

  • Renesas M3S-UFLA32R - page 25

    M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 21 of 30 5.1 1 Blank Check (1) Choose [Blank Check(B )] from [Device(D )] menu or click [Blank Check] button to display the dialog that shows execution process, and then pe rform bl ank check o peration. After completin g blank check, the dialog is closed an ...

  • Renesas M3S-UFLA32R - page 26

    M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 22 of 30 5.12 V erify Check (1) Choose [V erify Check(V )] from [Device(D )] menu or click [V erify Check] button to display the dialog that shows execution process, and then pe rform veri fy check operation. Af ter completing verify check, the dialog is clo ...

  • Renesas M3S-UFLA32R - page 27

    M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 23 of 30 5.13 E.B.P .V . (Erase, Blank Check, Program, V erify Check) (1) Choose [Batch Processi ng] -[E.B.P .V .] from [Device(D )] menu or click [E.B.P .V .] button to consecutively execute "Erase," "Blank Check," "Prog ram," ...

  • Renesas M3S-UFLA32R - page 28

    M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 24 of 30 5.15 B.P .V . (Blank Check, Program, V erify Check) (1) Choose [Batch Processing ]-[B.P .V .] from [Device(D )] menu or click [B.P .V .] button to consecutively execute "Blank Check," "Pr ogram," and "V erify Check." Fi ...

  • Renesas M3S-UFLA32R - page 29

    M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 25 of 30 5.16 Setting (1) Choose [Setting(S )] from [Others(O )] menu to display "Setup" dialog. Figure 5.16.1 Setting ...

  • Renesas M3S-UFLA32R - page 30

    M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 26 of 30 (2) In the "Setup" dialog, it is possibl e to choose M CU ty pe, verify process, and write ID code i nto the ID code area. It is possible to choose MCU from "Mcu T ype(M )" pull-down menu. It is possible to choose verify c heck p ...

  • Renesas M3S-UFLA32R - page 31

    M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 27 of 30 5.17 ID Code Setting (1) Choose [ID Code Setting(I )] from [Others(O )] menu to display "ID code setting" dialog. Figure 5.17.1 ID Code Setting ...

  • Renesas M3S-UFLA32R - page 32

    M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 28 of 30 (2) In the "ID code setting" dialog, the ID c ode for verification is set. T able 5.17.1 shows function list of operable and n ot operable functions accordi ng with the verify result. Choose [S pecify ID code by hexadecimal] to set the ID ...

  • Renesas M3S-UFLA32R - page 33

    M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 29 of 30 5.18 V ersion Information (1) Choose [V ersion information (UFLA32R) (A )] from [Help(H )] menu to display "V ersion information (UFLA32R)" dialog. Figure 5.18.1 V ersion Information (2) In the "V ersion information (UFLA32R)" di ...

  • Renesas M3S-UFLA32R - page 34

    M3S-UFLA32R UART Flash Memory Programming Utility REJ10B0239-0140/Rev .1.40 Mar . 2007 Page 30 of 30 6. Error Message List T able 6.1.1 lists error messages, causes, and approa ches provided from the M 3S-UFLA32R. T able 6.1.1 Error Message List Error Message Cause Approach 1 MCU information is incorrect. Please check whether the "UFLA32R.i ni ...

  • Renesas M3S-UFLA32R - page 35

    Revision History M3S-UFLA32R UART Flash Memory Programming Utilit y Description Rev . Date Page Summary 1.00 Jun 25, 2000 - First edition issued. 1.01 Dec 4, 2000 - Changed output messa ge from Japa nese to English. 1.02 Jan 29, 2002 7 Added references to 2) Connecting Ho st PC with T arget System in Chapter 3. Changed product name fro m UFLA32 to ...

  • Renesas M3S-UFLA32R - page 36

    Uart Flash Memor y Programming Utility User’ s Manual M3S-UFLA32R Publication Date: 1st Edition, Jun., 2000 Re v .1.40, Mar . 06, 2007 Published b y: Sales Strategic Planning Div . Renesas T echnology Cor p.  2007. Renesas T echnology Cor p., All r ights reser ved. Printed in Japan. ...

  • Renesas M3S-UFLA32R - page 37

    M3S-UFLA32R User’s Manual 2- 6 -2, Ote-machi, Chiyoda-ku, Tokyo, 1 00-0004, Japan ...

Fabricant Renesas Catégorie Computer Drive

Les documents que nous recevons du fabricant de l'appareilRenesas M3S-UFLA32R peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Renesas
- manuels d’utilisations M3S-UFLA32R
- fiches produit Renesas
- dépliants
- ou étiquettes-énergie Renesas M3S-UFLA32R
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Renesas M3S-UFLA32R.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Renesas M3S-UFLA32R, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Renesas M3S-UFLA32R. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Renesas M3S-UFLA32R.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Renesas M3S-UFLA32R, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Renesas M3S-UFLA32R par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Renesas M3S-UFLA32R.

Le manuel d’utilisation complet Renesas, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Renesas M3S-UFLA32R - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Renesas M3S-UFLA32R, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lRenesas M3S-UFLA32R qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Renesas M3S-UFLA32R - qui devraient nous aider dans les premières étapes lors de l'utilisation Renesas M3S-UFLA32R
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Renesas M3S-UFLA32R
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Renesas M3S-UFLA32R dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Renesas M3S-UFLA32R?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Renesas M3S-UFLA32R, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Renesas M3S-UFLA32R il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)