-
Planet Technology WNRT-620 - page 1
802.11n Wireless Broadband Router WNRT-620 User’s Manual ...
-
Planet Technology WNRT-620 - page 2
Copyright Copyright © 2008 by PLANET T echnology Corp. All right s reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a re trieval s ystem, or translated into any lang uage or computer language, in any form or by any means, el ectronic, mechanical, magnetic, optical, chemical, manual or otherwise, without ...
-
Planet Technology WNRT-620 - page 3
This device complies with Part 15 of the FCC Ru les. Operation is subject to the Following t wo conditions: (1) This device may not cause harmful in terfere n ce, and (2) this Device must accept any interference received, including interfer enc e that may cause undesired operation. Federal Communication Commissi on (FCC) Radiation Exposure Statemen ...
-
Planet Technology WNRT-620 - page 4
T ABLE OF CONTENTS CHAPTER 1 INTRODUCT ION .................................................................................................. 1 1.1 P ACKAGE C ONTENTS .................................................................................................. 2 1.2 F EA TURES ................................................................... ...
-
Planet Technology WNRT-620 - page 5
7.6 S TAT I S T I C S ............................................................................................................... 87 CHAPTER 8 T OOLS .......................................................................................................... 88 8.1 C ONFIGURA TION T OO LS .......................................................... ...
-
Planet Technology WNRT-620 - page 6
Chapter 1 Introduction - 1 - Thank you for purchasin g WNRT -620. T his manual gu ide s you on how to install and pr operly use the WNRT -620 in o rder to take full advantage of its features. ...
-
Planet Technology WNRT-620 - page 7
1.1 Package Contents Make sure that you have the following items: • One WNRT-620 • One Power Adapter • One CD Disk • One Quick Installation Guide • One Ethernet Cable Note: If any of the above items are missing, please contact your supplier for su pport. - 2 - ...
-
Planet Technology WNRT-620 - page 8
1.2 Features z Compliant with IEEE 802.1 1n (Draft 2.0) wireless technology z Provides up to 300Mbps data rate z Support Wi-Fi Protected Setup (WPS) z Backward compatible with 802.1 1g / 802.1 1b standard z Farther coverage, less dead spaces and high er throughput wit h 80 2.1 1n technology z Supports 64/128-bit WEP , WP A (TKIP with I EEE 802.1x), ...
-
Planet Technology WNRT-620 - page 9
1.3 Specification S tandard IEEE 802.1 1b/g, 802.1 1n Draft 2.0 Signal T ype 1 1b mode: DSSS 1 1g mode: OFDM 1 1n mode: OFDM, MIMO Modulation 1 1b mode: CCK, DQPSK, DBPSK 1 1g mode: 64 QAM, 16 QAM, QPSK, BPSK 1 1n mode: 64 QAM, 16 QAM, QPSK, BPSK WA N P o r t 1 x 100Base-TX, Auto-MDI/MDI-X LAN Port 4 x 100Base-TX, Auto-MDI/MDI-X Antenna connector 3 ...
-
Planet Technology WNRT-620 - page 10
Chapter 2 Hardware Installation - 5 - Before you proceed with the installation, it is necessary that you have enough information a bout the WNRT -620. ...
-
Planet Technology WNRT-620 - page 11
2.1 Hardware Connection 1. Locate an optimum location for the WNRT -620. T h e b e s t place for your WNRT -620 is usually at the center of your wireless net work, with li ne of sight to all of your mobile stations. 2. Adjust the antennas of WNRT -620. Try to adjust them t o a position that can best cover yo ur wireless network. The antenna’s pos ...
-
Planet Technology WNRT-620 - page 12
- 7 - ...
-
Planet Technology WNRT-620 - page 13
2.2 LED Indicators LED Color STATE MEANING On Device power on Off Device power off PWR Green Blinking During boot up procedure Blinking Transmitting or receiving d ata through the Wireless LAN WLAN Orange Off Wireless LAN is no function On WAN port is connected at 100Mbps 100M Green Off WAN port is disconnected at 100Mbps On Link is established WA ...
-
Planet Technology WNRT-620 - page 14
Chapter 3 Web Login Web configuration provides a user-fri endly graphica l user interface ( web pages) to manage your WNRT -620. A WNRT -620 with an assigned IP address w ill allows you to monito r and configure via w eb browser (e.g., MS Internet Explorer or Netscape). 1. Open your web browser . 2. Enter the IP address of your WNR T -620 in the ad ...
-
Planet Technology WNRT-620 - page 15
Section Description Quick Setup Select your Internet conn ection type and th en input the configurations needed to connect to your Internet Service Provider (ISP). General Setup This section contains configurations for the Broadban d router ’s advance functions such as: Port Forwarding, Virtual Server , Acc ess Control, Hacker Attack Prevention, ...
-
Planet Technology WNRT-620 - page 16
Chapter 4 Quick Setup - 11 - This section describes the b asic co nfiguration of the WN RT -620 an d allows you to co nnect to Internet easily . ...
-
Planet Technology WNRT-620 - page 17
4.1 Time Zone The time information is used for Log entri es and Firewall settings. Y ou can keep the default Time Server address or set a new IP address for your router to synchronize its time. Click “Next” to continue. Parameter Description Set Time Zone Select the time zone of the countr y yo u are currently in. The ro uter will set its time ...
-
Planet Technology WNRT-620 - page 18
4.2 Broadband Type Before establishing the Internet connection, pleas e be sure to check with your ISP , and obtain all necessary information from them. Broadband Description Cable Modem ISP will automatically give you an IP address. Please refer to section 4.2.1 for details. Fixed-IP Xdsl ISP has given you a fixed IP address already . Please refer ...
-
Planet Technology WNRT-620 - page 19
4.2.1 Cable Modem With Cable Modem connectio n, the ISP will automatically give you an IP address. Some ISP may also require you to fill in add itional information su ch as Host Name and MAC ad dress (see scr een below). Note : The Host Name and MAC address section is optional and you can skip this section if your ISP does not require these setting ...
-
Planet Technology WNRT-620 - page 20
4.2.2 Fixed-IP xDSL Select Fixed-IP xDSL if you’re ISP has given you a specifie d IP address. Y our ISP should provide all the information required in this section. Parameters Description IP address assigned by your Service Provider The IP address that you’re ISP should provide you. Subnet Mask Enter the Subnet Mask provid ed by your ISP (e.g. ...
-
Planet Technology WNRT-620 - page 21
4.2.3 PPPoE xDSL Select PPPoE if your ISP requires the PPPoE protocol for Internet connectivity . Y our ISP should provide all the information like user nam e, password required in this section. - 16 - Parameters Description User Name Enter the User Name provided by your ISP for the PPPoE connection. Password Enter the Password provided b y your IS ...
-
Planet Technology WNRT-620 - page 22
network application software, computer viru s or hacker attacks from the Internet. For example, some software sends network packe t s to the Internet in the background, even when you are not usi ng the Internet. So pl ease turn off your computer when you are not usi ng it. This function also ma y not work with some ISP . So please make sure this fu ...
-
Planet Technology WNRT-620 - page 23
explanation on MAC address). Use the following IP address Select it if the ISP provides you a st atic IP to connect to the PPTP server . IP Address This is the IP address that your IS P has given you to establish a PPTP connection. Subnet Mask Enter the Subnet Mask provid ed by your ISP (e.g. 255.255.255.0) Gateway Enter the IP address of the ISP? ...
-
Planet Technology WNRT-620 - page 24
press “OK”, you will see a web screen to pro mpt you the configurations s ave successfully . Please refer to section 4.2.7 for the information of this screen. 4.2.5 L2TP xDSL Select L2TP if your ISP requires the L2TP protocol to connect to the Interne t. Y our ISP should provide all the information required in this section. - 19 - Parameter Des ...
-
Planet Technology WNRT-620 - page 25
Subnet Mask Enter the Subnet Mask provid ed by your ISP (e.g. 255.255.255.0) Gateway Enter the IP address of the ISP’s Gateway . User ID Enter the User Name provided by your ISP for the L2TP connection. Sometimes called a Connection ID. Password Enter the Password provided b y your ISP for the L2TP connection L2TP Gateway If your LAN has a L2T P ...
-
Planet Technology WNRT-620 - page 26
4.2.6 T elstra Big Pond Select T elstra Big Pond if you are liv e in Australia and your ISP requires this protocol to conn ect to th e Internet. Y our ISP should provide all the infor mation required in this section. Parameters Description User Name Enter the User Name provided by your ISP for the connection. Password Enter the Password provided by ...
-
Planet Technology WNRT-620 - page 27
Please wait for 30 seconds for WNRT -620 restart. After rest art procedure finished, pl ease click “OK” to return to HOME screen . - 22 - ...
-
Planet Technology WNRT-620 - page 28
Chapter 5 General Setup After click on the “General Setup” button at the main Page, you should see the screen belo w . The General Setup contains advanced features that allow you to conf igur e the router to meet the network’s needs such as: Wireless, Port For warding, Virtual Server , Access Control, URL Blocking, S pecial Applications, DMZ ...
-
Planet Technology WNRT-620 - page 29
5.1 System This section shows how to setup the Broadband ro ut er ’s system T ime Zone, Password and Remote Management Administrator . 5.1.1 T ime Zone The T ime Zone allows WNRT -620 to allocate its time on the settings configured here; it will affect log display functions such as Securit y Log and Firewall settings. - 24 - Parameter Description ...
-
Planet Technology WNRT-620 - page 30
T ime Server Address Y ou ca n keep the default IP address or enter a new T ime Server Address for this device to synchronize its time. Y ou can also r efer to the web site http://www .ntp. org to find a nearest time server . Daylight Savings The router can also take Daylight saving s into account. Sel ect the check box to enable your dayl ight sav ...
-
Planet Technology WNRT-620 - page 31
5.1.3 Remote Management Y ou ca n specif y a Host IP address that can perform remote management from Internet. Parameters Description Host Address The IP address of the host on Internet t hat will have management / configuration access to the Broadband router . Leave it to 0.0.0.0 means anyone can access the router ’s web-based configuration from ...
-
Planet Technology WNRT-620 - page 32
5.2 WAN The WAN Settings screen allows you to specif y the ty pe of Internet connection. T he W AN settings of fer the following selections for the router ’s W AN port, Dynamic IP , St atic IP , PPPoE , PPTP , L2TP , and T elstra Big Pond . Please select one of the connection type s and click “More Configurati on” button or select the option ...
-
Planet Technology WNRT-620 - page 33
5.2.2 St atic IP If S tatic IP is selected, your ISP should provide al l the information re quir ed in this screen. Please refer to the section 4.2.2 for more settings of this option. 5.2.3 PPPoE Select PPPoE if your ISP requires PPPoE protocol to connect to the Internet. Y our ISP should provide all the information required in this section. Ple as ...
-
Planet Technology WNRT-620 - page 34
5.2.5 L2TP Select L2TP if your ISP requires the L2TP protocol to connect to the Interne t. Y our ISP should provide all the information required in this section. Please re fer to section 4.2.5 for more settings of this optio n. - 29 - ...
-
Planet Technology WNRT-620 - page 35
5.2.6 T elstra Big Pond Select T elstra Big Pond if you r ISP requires the T elstr a Big Pond protocol to con nect you to the Internet. T elstra Big Pond protocol is used by the ISP in Australia. Y our ISP should provide all the information required in this section. Please refer to sect ion 4.2.6 for more settings of this opti on. 5.2.7 DNS - 30 - ...
-
Planet Technology WNRT-620 - page 36
Parameters Description DNS address This is the ISP’s DNS server IP address that they gave you; or you can specify your own preferr ed D NS server IP address. Secondary DNS Address (optional) This is optional. Y ou can enter another D NS server ’s IP address as a backup. The secondary DNS will be used when the above primary DNS fails. After conf ...
-
Planet Technology WNRT-620 - page 37
Parameters Description Dynam ic DNS Enable/Disable the DDNS function of this router . P r o v i d e r S e l e c t a D D N S service provider . The default setting is “DynDNS”. Domain name Y our static domain name that use DDNS. Account / E-mail The account that your DDNS service provide r assigned to you. Password / Key The password you set for ...
-
Planet Technology WNRT-620 - page 38
5.3 LAN The LAN Port screen below allo ws you to specify a pr ivate I P address for your router ’s LAN interface. - 33 - Parameters Description LA N IP Please input the IP address of this router . IP Address Designate the Access Point’s IP Address. This IP Address shoul d be unique in your network. The default IP Address is 192.168.0.1 . Subnet ...
-
Planet Technology WNRT-620 - page 39
S tart IP/End IP Y ou c an designate a particular IP address range for yo ur DHCP server to issue IP addresses to your LAN Clients. By defau lt the IP range is from: S tart IP 192.168.0.100 to End IP 192.168.0.200 . Domain Name Y ou ca n specif y the Domain Name for your Access Point. St atic DHCP Leases Ta b l e This function allows you to assig n ...
-
Planet Technology WNRT-620 - page 40
5.4 Wireless This screen allows you to Enabl e/Disable WNRT -620 wireless function. Parameters Description Enable/Disable Y ou can select to “ Enable ” or “ Disable ” the Wireless interface. After selected, please click “Apply” to make the settings effect. After configuration complete, please click “Apply” button to save the confi g ...
-
Planet Technology WNRT-620 - page 41
5.4.1 Basic Settings WNRT -620 supports not only Access Point f unction, but also provides Bri dge and WDS mode. Please Refer to “Chapter 6 W ireless Configuration ” know the det ails settings of wireless Basic Settings. In Default, WNRT -620 will work with AP mode. 5.4.2 Advance Settings Y ou should not change the parameters in this screen unl ...
-
Planet Technology WNRT-620 - page 42
Parameters Description Fragment Threshold “Fragment Threshold” specif ies the maximum size of packet during the fragmentation of data to be trans mitted. If you set this value too low , it will result in bad performance. RTS Threshold When the packet size is smaller the RTS threshold, the acc ess point will n ot use the RTS/CTS mechanism to sen ...
-
Planet Technology WNRT-620 - page 43
N Data Rate Table HT20 HT40 MCS Index Data rate (Mbps) @ 400ns GI 0 7.2 15.0 1 14.4 30.0 2 21.7 45.0 3 28.9 60.0 4 43.3 90.0 5 57.8 120.0 6 65.0 135.0 7 72.2 150.0 8 14.444 30.0 9 28.889 60.0 10 43.333 90.0 11 57.778 120.0 12 86.667 180.0 13 115.556 240.0 14 130.000 270.0 15 144.444 300.0 5.4.3 Security WNRT -620 provides comp lete wireless LAN sec ...
-
Planet Technology WNRT-620 - page 44
Then the access point will just allow the clients t hat with the same encryption keys connected. Y ou can use WEP encryption in “AP mode”, “S tation-Ad Hoc mode”, “S tation-Infrastructure mode” and “AP Bridge-WDS mode”. If you would like to enabl e 80 2.1x Authentication also, pleas e check the “Enable 802.1x Authentication” and ...
-
Planet Technology WNRT-620 - page 45
After configuration complete, ple n. Then you will see a r 5.4.3.2 802.1X nticati on protocol. Every user must use a valid account to logi n to this Access ase click “Apply” button to save the co nfigu ratio screen to prompt you the settings are saving successf ul l y. You may press “Continue” for config ure oth e settings or “Apply” to ...
-
Planet Technology WNRT-620 - page 46
Parameter Description Encryption Please select “WP A pre-share d key” in this option. WP A (TKIP) TKIP can change the encryption key frequently to enhance the wireless LAN security . WP A2 (AES) This use CCMP protocol to change encryption key fr equently . AES can provide high-level encr yption to enhanc e the wirel ess LAN security . WPA Unica ...
-
Planet Technology WNRT-620 - page 47
Parameter Description Encryption Please select “WP A RADIUS” in this option. WP A (TKIP) TKIP can change the encryption key frequently to enhance the wireless LAN security . WP A2 (AES) This use CCMP protocol to change encryption key fr equently . AES can provide high-level encr yption to enhanc e the wirel ess LAN security . WPA Unicast Cipher ...
-
Planet Technology WNRT-620 - page 48
5.4.4 Access Control WNRT -620 pro vides MAC Address Filtering, which pr events the unauth orized users from accessi ng your wireless network. Parameters Description Enable Wireless Access Control Enable or disable the MAC Address Filterin g function. Add MAC Address to the control table In the bottom “New” area, fill in the “MAC Address” a ...
-
Planet Technology WNRT-620 - page 49
5.4.5 WPS Wi-Fi Protected Setup (WPS) is the simples t way to build connection betwee n wireless net work clients and this wireless router . Y ou don’t have to select encryption mode a nd input a long en cryption pass phrase every time when you need to setu p a wireless cli ent, you on ly have to press a b utton on wireles s client and this wirel ...
-
Planet Technology WNRT-620 - page 50
Mode here. Passphrase Key Confirming your Identity Key Store Pass-phrase. It is allowed you to easily remember the key what you may want to remember is that if the passphrase is used, Device Configure Configure via Push Button Click ‘S tart PBC’ to start Push-Button style WPS setup procedure. T his wireless router will wait for WPS requests fro ...
-
Planet Technology WNRT-620 - page 51
5.5 QoS Quality of Service (QoS) refers to t he capability of providing better service to selected network traffic. The primary goal of QoS is to provide priorit y incl uding dedic ated bandwidth, controlled jitter and late ncy (required by some real-time and interactive traffic), and improved loss character istics. When using this feature, it is i ...
-
Planet Technology WNRT-620 - page 52
Reset If you want to erase all values you just entered, please clic k “Reset” to clear your current selections. After configuration complete, please click “Apply” button to save the confi gur ation. Then you will see a screen to prompt you the settings are saving successful ly. You may press “Continue” for configure other settings or ? ...
-
Planet Technology WNRT-620 - page 53
the configuration. Local IP Address Please enter the IP address of the local PC. Local Port Range Please enter the port range. Remote IP Address Please enter the IP address of the PC from remote site. Remote Port Range Please enter the port range. T raffic T ype Select the traffic ty pe of the packets t hat this rule will apply to. We list some pop ...
-
Planet Technology WNRT-620 - page 54
5.6 NAT Network Address Translation (NA T) allows multiple user s at your local site to access the Internet via a single legal IP Address. NA T provides Firewall prot ection from hack er attacks and has the flexibility to allow you to map Priv ate IP Addresses to Public IP Addresses for key services such as Websites and FTP . If NA T is disabled, a ...
-
Planet Technology WNRT-620 - page 55
5.6.1 St atic Routing After you disable NA T mode, you can enable S tatic Routin g to turn off NA T function of this router and let this router forward packet by your routing policy . - 50 - Parameters Description Enable S tatic Routing Check this box to enable S tatic Rout ing function, uns elect this box if you don’t want to turn off NA T funct ...
-
Planet Technology WNRT-620 - page 56
Reset Click “Reset” will clear your current selections . After configuration complete, please click “Apply” button to save the confi gur ation. Then you will see a screen to prompt you the settings are saving successful ly. You may press “Continue” for configure other settings or “Apply” to restart WNRT -620 with new conf iguration. ...
-
Planet Technology WNRT-620 - page 57
before adding it and want to retype again, just click "Clear" and the fields will be cleared. Reset Click “Reset” will clear your current settings to allows you to enter aga in. Current Port Forwarding T able Delete Selected If you want to remove some MAC addr ess from the “Curre nt Access Control List”, select the MAC addresses y ...
-
Planet Technology WNRT-620 - page 58
Private IP This is the LAN client/host IP address t hat the Public Port number packet will be sent to. Note: Y ou need to give your LAN PC cli ents a fixed/static IP address f or Virtual Server to work properly . Private Port This is the port number (of the above Priv at e IP host) that the below Public Port number will be changed to when the packe ...
-
Planet Technology WNRT-620 - page 59
5.6.4 Special Applications Some applications require multiple co nnections, su ch as Internet games, video conferencing, Internet telephony and others. In this section you can confi gure the router to supp ort multiple connections for these types of applications. - 54 - Parameters Description Enable Enable the S pecia l Applicati on function. IP Ad ...
-
Planet Technology WNRT-620 - page 60
Delete Selected If you want to remove some items from the “Current Trigger Port T able”, select the MAC addresses you want to remove in the table and then click “Delete Selected”. Delete All If you want to remove all items from the table, just click this button. Reset Click “Reset” will clear your current selections . After configuratio ...
-
Planet Technology WNRT-620 - page 61
Parameters Description UPnP Feature Enable or Disable UPnP function. After configuration complete, pleas e click “Ap ply” button to save the configur ation. T hen you will see a screen to prompt you the settings are saving successf ul l y. You may press “Continue” for config ure oth er settings or “Apply” to restart WNRT-620 with new co ...
-
Planet Technology WNRT-620 - page 62
5.6.6 ALG Settings Y ou can select applications that need “Appl ication Layer Gateway” to support. Parameters Description Enable Y ou can sel ect to enable “Application Layer Gateway” of an application and then the router will let that application correctly pass though the NA T gat eway . After configuration complete, please click “Apply? ...
-
Planet Technology WNRT-620 - page 63
5.7 Firewall WNRT -620 provides e xtensive firewall protection by restricting connecti on parameters, thus limiting the risk of hacker attack, and defending against a wide a rray of common Internet attacks. However , for applications that require unrestrict ed access to the Internet, y ou can configure a specific client/server in a Demilitarized Zo ...
-
Planet Technology WNRT-620 - page 64
- 59 - Parameters Description Enable MAC Filtering Check “Enable MAC Filtering” to enabl e MAC Filtering. If select “Deny”, all PCs will be allowed to access Internet accept for the PCs in the list below . If select “Allow”, all PCs will be denied to access Internet accept for the PCs in the list below . Add PC Fill in “Client PC MAC ...
-
Planet Technology WNRT-620 - page 65
Delete All If you want to delete all PCs. Please click this button. After configuration complete, please click “Apply” button to save the confi gur ation. Then you will see a screen to prompt you the settings are saving successful ly. You may press “Continue” for configure other settings or “Apply” to restart WNRT -620 with new conf igu ...
-
Planet Technology WNRT-620 - page 66
Client PC Description Please input a ny text to describe this IP address, up to 16 alphanumerical characters. Client PC IP Addresses Please input the starting IP address in the left field, and input the end IP address in the right field to def ine a ran ge of IP addresses, or just input the IP address in the left field to define a single IP address ...
-
Planet Technology WNRT-620 - page 67
Add URL / Keyword Fill in “URL / Keyword” and then click “Add”. Y ou can enter the full URL address or the keyword of the web site you want to block. If you find any typo before adding it and want to retype again, ju st click "Reset" and the field will be cleared. Remove URL / Keyword If you want to remove some URL keyword from th ...
-
Planet Technology WNRT-620 - page 68
Please see section 5.7.3.1 ‘Do S – Advanced Settings’ belo w . After configuration complete, please click “Apply” button to save the confi gur ation. Then you will see a screen to prompt you the settings are saving successful ly. You may press “Continue” for configure other settings or “Apply” to restart WNRT -620 with new conf ig ...
-
Planet Technology WNRT-620 - page 69
settings or “Apply” to go back to “Denial of Service Feature” configur ation setting. - 64 - ...
-
Planet Technology WNRT-620 - page 70
5.7.4 DMZ If you have a local client PC that cannot run an Inte rnet application (e.g. Games) prop erly from behind the NA T firewall, you can open the client up to unres tricted two- way Internet access by defining a DMZ Host. The DMZ function allows you to re-direct all packets from your W AN port IP address to a particular IP address in your L A ...
-
Planet Technology WNRT-620 - page 71
Chapter 6 Wireless Configuration In this chapter , you can Enable/Disable wireless function an d configure the WNRT -620 work in different operating mode. Please refer to below sections to kno w the details configuration of each operating mode. - 66 - ...
-
Planet Technology WNRT-620 - page 72
6.1 AP Mode This mode is set to WNRT -620 by default. It served as a transparent Media Access Control (MAC) brid ge between wi red and wireless ne twork. Parameter Description Mode Shows the current operation mode. You m ay set WNRT-620 to other operating mode by select other operatin g mode. Band 2.4GHz (B): It forces the WNRT-620 to operate in 80 ...
-
Planet Technology WNRT-620 - page 73
information about this screen. - 68 - ...
-
Planet Technology WNRT-620 - page 74
6.2 Station-Infrastructure Mode WRT-620 ser ves as a wireless station (infrastru cture). Connected to a PC or a small LAN (no more than 5 PCs), it allows the PC or smal l LAN able to access the wireless net work via Access Point. - 69 - Parameter Description Mode Shows the current operation mode. You may set WRT-620 to other operating mode by selec ...
-
Planet Technology WNRT-620 - page 75
You may press “ Refresh ” to get the new Access Point and select one of them to click “ Done ” to connect. WLAN MAC Keep default setting : WRT-620 will use it’s own MAC address to access the wireless LAN. Press “MAC Clone” button : It will use PC’s MAC address to access the wireless LAN. After configuration complete, please click ? ...
-
Planet Technology WNRT-620 - page 76
6.3 AP Bridge Point to Point Mode This function allows WNRT-620 to bridg e 2 wired Ethernet networks wirelessly. Parameter Description Mode Shows the current operation mode. Y ou may set WNRT -620 to other operating mode by select other operatin g mode. Band 2.4GHz (B): It forces the WNRT -620 to oper ate in 802.1 1b on l y . 2.4GHz (G): It forces ...
-
Planet Technology WNRT-620 - page 77
6.4 AP Bridge Point to Multi-point Mode This function allows WNRT-620 to bridge more than 2 wired Ethernet networks together by wireless connection. Parameter Description Mode Shows the current operation mode. You m ay set WNRT-620 to other operating mode by select other operatin g mode. Band 2.4GHz (B): It forces the WNRT -620 to oper ate in 802.1 ...
-
Planet Technology WNRT-620 - page 78
settings or “Apply” to restart WNRT -620 with new conf iguration. Pleas e refer to section 4.2.7 for mor e information about this screen. - 73 - ...
-
Planet Technology WNRT-620 - page 79
6.5 AP Bridge-WDS Mode If you want WNRT -620 to bridge to other WNRT -620 and provide access for other wireless clients at the same time, you have to set the WNRT -620 to “AP Bridge - WDS”. Simply speaking, “AP Bridge - WDS” function is the combination of “AP mode” and “AP Bridge-Point to Multi-Point mode”. - 74 - Parameter Descript ...
-
Planet Technology WNRT-620 - page 80
Channel 1-1 1 ( North America) Associated Client You may press “ Show Active Clients ” button to check the connected client information. After the button pressed, y ou will see the di alog box as be lo w. You may press “ Refresh ” to get the ne w client table or “ Close ” to close this dialog box. MAC Address 1-4 If you want to bridge m ...
-
Planet Technology WNRT-620 - page 81
6.6 Universal Repeater Mode - 76 - Parameter Description Mode Shows the current operatio n mode. Y ou may set WNRT -620 to other operating mode by select other operatin g mode. Band 2.4GHz (B): It forces the WNRT -620 to oper ate in 802.1 1b on l y . 2.4GHz (G): It forces the WNRT -620 to operate in 80 2.1 1g only . 2.4GHz (N): It forces the WNRT - ...
-
Planet Technology WNRT-620 - page 82
You may press “ Refresh ” to get the ne w client table or “ Close ” to close this dialog box. Root AP SSID In “Universal Repeater mode”, this devic e can act as a st ation to conne ct to a Root AP . Y ou should enter the SSID of the Root AP here. Site Survey You also can p r ess ”Select S ite Survey” button to choose wireless networ ...
-
Planet Technology WNRT-620 - page 83
6.7 Security Setting of Bridge Mode In “AP Bridge-Point to Point mode”, “AP Bridge-Point to Multi-Point mode” and “AP Bridge-WDS mode”, you can click “Set Securit y” to add encryption for the communi cation between the bridged access points. This can protect your wireless net work. 6.7.1 WEP When you select 64-b it or 128-bit WEP ke ...
-
Planet Technology WNRT-620 - page 84
Parameter Description Key Length Y ou c an select the 64 or 128-bit ke y to encrypt transmitted data. Larger WEP key length will provide higher lev el of security , but the throughput will be lower . Key Format Y ou may select to select ASCII Characters (alpha numeric format) or Hexadecimal Digits (in the “A-F”, “a -f” and “0-9” range) ...
-
Planet Technology WNRT-620 - page 85
- 80 - Parameter Description Encryption Please select “WP A pre-share d key” in this option. WP A (TKIP) TKIP can change the encryption key frequently to enhance the wireless LAN security . WP A Unicast Cipher Suite WP A2 (AES) This use CCM P protocol to c hange encryption key fr equently . AES can provide high-level encr yption to enhanc e the ...
-
Planet Technology WNRT-620 - page 86
Chapter 7 Status The S tatus screen allows you to monitor the current st atus of your router . Y ou can use the S tatus page to monitor the connection status of W AN and LAN interf aces, the current firmware and hard ware version numbers, any illegal attempts to access your net work, and information on all DH CP client PCs currently connected to yo ...
-
Planet Technology WNRT-620 - page 87
7.1 Internet Connection View WNR T -620’s current Internet connecti on status and other related information. - 82 - ...
-
Planet Technology WNRT-620 - page 88
7.2 Device Status View WNR T -620’s current configuration settings. The Device S tatus displays the configuration settings of WLAN and LAN. - 83 - ...
-
Planet Technology WNRT-620 - page 89
7.3 System Log This screen will show you the real -time information of WNRT -620. Parameters Description System Log This page shows the current system log of WNRT -620. It displays the working information about WNRT -620. About the bottoms of the p age, the system log can be saved to a local fil e by press “Save” button. If there is t oo much m ...
-
Planet Technology WNRT-620 - page 90
7.4 Security Log View any attempts that have been made to illegally gain access to your network. Parameters Description Security Log This page shows the current security log of WNRT -620. It displays any illegal attempts to access your network. About the bottoms of the page, the security log can be save d to a local file by press “Save” button. ...
-
Planet Technology WNRT-620 - page 91
7.5 Active DHCP Client View your client's information that is currently linked to WNRT -620's DHCP server . Parameters Description DHCP Client T able This page shows all the DHCP clients currently connected to your network. The “Active DHCP Client T able” displays the IP address and the MAC address and Time Expired of each Clien t. Us ...
-
Planet Technology WNRT-620 - page 92
7.6 Statistics View the st atistics of packets sent and received on WLAN, LAN and WAN. - 87 - Parameters Description S tatistics Shows the counters of packets sent and received on WLAN, LAN and WAN. ...
-
Planet Technology WNRT-620 - page 93
Chapter 8 Tools This page includes the basic configuration tools, such as Config uration T ools (save or restore configuration settings), Firmware Upgrade (u pgrade system firmware) and Reset. - 88 - ...
-
Planet Technology WNRT-620 - page 94
8.1 Configuration Tools The Configurat ion T ools screen allo ws you to “Back up” the router ’ s current confi guration setting. Saving the configuration settings provi des an add ed pr otection and conveni ence when problems occu r and you have to reset to factory default. With the saved file, you can re-load the saved configur ation into th ...
-
Planet Technology WNRT-620 - page 95
8.2 Firmware Upgrade This page pro mpt you it allows you to upgra de the router ’ s firmware. Please press “Next” to continue. Parameters Description Firmware Upgrade This tool allows you to upgra de WNRT -620’s system firmware. T o upgrad e the firmware of your Broadband router , you nee d to download the firmware file to your local hard d ...
-
Planet Technology WNRT-620 - page 96
restart, you can start using the router . - 91 - ...
-
Planet Technology WNRT-620 - page 97
- 92 - 8.3 Reset Y ou can reset the router ’ s system shou ld a ny pr oblem exist. The reset function is essentially Re-boot your router . Parameters Description Reset In the event that the system stops responding corre ctly or in some way stop s functioning, you can perform a reset. Y our s ettings will not be change d . T o perform the reset, c ...
Avez-vous une question à propos de Planet Technology WNRT-620?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec Planet Technology WNRT-620, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Planet Technology WNRT-620 il est probable qu’il a envie de partager la façon de le résoudre.