-
AEG Gas hob - page 1
1 INSTRUCTION- AND INST ALLA TION BOOK Gas hob 6530 DG-m G B 949600249 GB ...
-
AEG Gas hob - page 2
2 Your New Appliance Thank you for purchasing an AEG appliance. To enable you to use your new hob efficiently and safely, please read this instruction book carefully before installing or using the appliance, and retain for future reference. Should the hob be transferred to a new owner please ensure this instruction book is left with the appliance i ...
-
AEG Gas hob - page 3
3 Contents P a g e n o F or the user Y our new appliance ...................................................................................... 2 Safety information ........................................................................................ 4 Description of the product ................................................................... ...
-
AEG Gas hob - page 4
4 Safety information These warnings are pro vided in the interests of your safety . Ensure you fully understand them before installing or using the appliance. Y our safety is of paramount importance. If you are unsure about the meaning of these warnings contact the Customer Care Department for assistance. Installing Do not install the hob if the ce ...
-
AEG Gas hob - page 5
5 Description of the pr oduct Burner Control knob Air intake Air intake The primary air intake aperture must ne ver be block ed by objests of any kind at any time. ...
-
AEG Gas hob - page 6
6 Burner markings Symbols at each control knob indicates which b urner is adjusted with the control knob . Front Burner Back b urner P anel markings Each control knob has a ring sho wing the scale of markings. Of f. Maximum flame Minimum flame Operations ...
-
AEG Gas hob - page 7
7 Burner co ver/inner b urner ring/outer b urner ring T ogether with the inner burner ring the outer b urner ring forms a space where the f inal mixture of gas and air takes place in order for the gas b urn correctly . Please note: It is very important that the inner b urner ring/outer burner ring is placed correctly , together with the cov er . Se ...
-
AEG Gas hob - page 8
8 1. Depress and turn the control knob for the b urner to the left to max. flame . (Ignition position) 2. The ignition electrode will emit sparks, and when the mixture of gas and air is correct, the b urner will be ignited. If it is not possible to connect the unit to mains, a match may be used to ignite the b urner . 3. After starting the burner , ...
-
AEG Gas hob - page 9
9 Maintenance and cleaning For reasons of hygiene and safety, the cooking zones must be kept clean. Grease stains and spilled food generate smoke when heated, and can even cause fire. The splashguard can be removed to make it easier to clean the surface. What to do: 1. Hold the splashguard as shown in the diagram. 2. Lift the splashguard straight u ...
-
AEG Gas hob - page 10
10 Stainless steel surfaces Perform daily cleaning with a slightly damp cloth. For more severe soiling, use a liquid cream. Always clean the steel in the direction of the steel finish. To ensure that the steel retains its shine, it is recommended that you use a polishing agent for stainless steel on a regular basis. Always polish in the direction o ...
-
AEG Gas hob - page 11
11 The operating panel with knob, pan support and b urner cov ers/rings are to be cleaned with ordinary cleaning agents. Do not use any kind of scouring powder . A void saucepans boiling o ver . If water gets into the b urner , this should be remov ed before re-igniting the burner , e.g. with a no-fluf f cloth. ...
-
AEG Gas hob - page 12
12 N L1 240 V 1N + PE T ype of gas Adjusted to natural gas: G20-20 mbar Category and pressures UK: II 2H3+ 20 mbar - 28/37 mbar Max. nominal load Q na H S : Medium sized burner = 1,9 kW x 1 Large sized burner = 2,7 kW x 1 T otal= 4,6 kW FSD The unit features fully-secured gas taps (thermo-fuse). H S = T op calorific value Q = Nominal load ID. CE-04 ...
-
AEG Gas hob - page 13
13 This hob must be installed in accordance with the Gas Safety (Installation and Use) Regulations (Current Edition) and the IEE Wiring Regulations (Current Edition). Detailed recommendations are contained in the following British Standards Codes Of Practice: B.S. 6172/ B.S. 5440, Par. 2 and B.S. 6891 Current Editions. The hob should not be install ...
-
AEG Gas hob - page 14
14 Connection to the gas supply should be with either rigid or semi- rigid pipe, i.e. steel or copper. The connection should be suitable for connection to RC ½ ( ½ BSP male conical thread). When the final connection has been made, it is essential that a thorough leak test is carried out on the hob and installaion. Ensure that the main connection ...
-
AEG Gas hob - page 15
15 Caution: In order to a void a hazard this appliance must be installed according to these instructions for installation The hob unit can be mounted in any type of kitchen with a table surface whose thickness is between 28 mm and 40 mm. Headr oom The distance to any shelv es or tops of a cabinet under the hob is to be at least 47 mm. Fixing Scre w ...
-
AEG Gas hob - page 16
16 It is not necessary to attach the reinforcement beam to the table surface, as it is held in place by a specially designed moulding, which is incorporated in the hob units flanges. Installation in w ork tops with a base unit underneath If the hob is to be installed on top of a base unit, a board must be mounted underneath the hob (e.g. 16 mm chip ...
-
AEG Gas hob - page 17
17 Do not install the hob above drawers. ...
-
AEG Gas hob - page 18
18 The unit´s externall y measured length 145 mm: Cooker hood 290 mm: T wo-zone ceramic-top electric hob T wo-b urner gas hob Grill Fryer Wo k 580 mm: Four -zone ceramic-top electric hob Four -burner gas hob 725 mm: Four -zone ceramic-top electric hob When mounting a single unit, be it a half-or full size unit, in a table surface which is thicker ...
-
AEG Gas hob - page 19
19 Something not w orking If the hob is not working correctly, please carry out the following checks before contacting your local AEG Service Force Centre. IMPORTANT: If you call out an engineer to a fault caused by incorrect use or installation, a charge will be made even if the hob is under guarantee. If after all these checks, your hob still doe ...
-
AEG Gas hob - page 20
20 In the event of your appliance requiring service, or if you wish to purchase spare parts, contact your local AEG Service Force Centre by telephoning: 08705 929 929 Your call will automatically be routed to the Service Centre covering your post code area. In-guarantee customers should ensure that the recommended checks under the heading "Som ...
-
AEG Gas hob - page 21
21 AEG of fer the follo wing guarantee to the f irst purchaser of this appliance: 1. The guarantee is v alid for 12 months commencing when the appliance is handed ov er to the first retail purchaser , which must be verif ied by purchase in v oice or similar documentation. 2. The guarantee cov ers all parts or components which fail due to f aulty wo ...
-
AEG Gas hob - page 22
22 Before you mov e please contact your nearest Customer Care centre, listed belo w , to gi ve them details of your ne w home. They will then ensure that the local service or ganisation is aw are of your mov e and able to look after you and your appliances. France Senlis +33 (0) 44 62 29 29 Germany N ü rnber g +49 (0) 911 323 2600 Italy Pordenone ...
-
AEG Gas hob - page 23
23 ...
-
AEG Gas hob - page 24
24 325 88-1620 Rev . 4-017 ...
Avez-vous une question à propos de AEG Gas hob?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec AEG Gas hob, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec AEG Gas hob il est probable qu’il a envie de partager la façon de le résoudre.