-
Sweex MO251 - page 1
English version 4 MO251 / MO251UK Sweex Wireless ADSL 2/2+ Modem/Router 54 Mbps Annex A Introduction • Do not expose the Sweex Wireless ADSL 2/2+ Modem/Router 54 Mbps Annex A to extreme temperatures. Do not place the device in direct sunlight or in the direct vicinity of heating elements. • Do not use the Sweex Wireless ADSL 2/2+ Modem/Router 5 ...
-
Sweex MO251 - page 2
English version 5 Rear view of the modem Starting on the left, the following connections can be found at the rear of the modem: • ADSL port for connecting the ADSL line with telephone cable RJ11. • UTP Ethernet ports 1, 2, 3 and 4 for connecting computers with an Ethernet network cable RJ45. • Power port for connecting the power adaptor. • ...
-
Sweex MO251 - page 3
English version 6 Configuring the computer to connect to the modem Windows Vista In the bottom left of your screen, go to “Start” (Start) “Control Panel” (Control Panel). Click on “View network status and tasks” (V iew network status and tasks). Left in the column, click on “Manage network connections” (Manage network connections). ...
-
Sweex MO251 - page 4
English version 7 Right-click “LAN Connection” (LAN Connection) or “Wireless Network connection” (W ireless Network connection) and select “Properties” (Properties). The following screen appears: Now select “Internet Protocol Version 4 (TCP/IPv4)” and click “Properties” (Proper ties). ...
-
Sweex MO251 - page 5
English version 8 Select the options “Obtain an IP address automatically” (Obtain an IP address automatically) and “Obtain DNS server address automatically” (Obtain DNS server address automatically). Confirm the settings by clicking “OK”. The network settings have now been configured cor rectly for Vista. The correct settings for the In ...
-
Sweex MO251 - page 6
English version 9 Select the options “Obtain an IP address automatically“ (Obtain an IP address automatically) and “Obtain DNS server address automatically” (Obtain DNS server address automatically). Confirm the settings by clicking “OK” (OK). The network settings for W indows XP have now been configured correctly . The correct settings ...
-
Sweex MO251 - page 7
English version 10 Select the options “Obtain an IP address automatically” (Obtain an IP address automatically) and “Obtain DNS server address automatically” (Obtain DNS server address automatically). Click “OK” (OK) twice. The network settings for Windows 2000 have now been configured correctly . The correct settings for the Internet b ...
-
Sweex MO251 - page 8
English version 11 Under the tab “IP Address” (IP Address), select the option “Obtain an IP address automatically” (Obtain an IP address automatically). Under the tab “Gateway”, the list of “Installed gateways” (Installed gateways) must be empty. If so required, select each gateway and click “Remove” (Remove). Under the tab “D ...
-
Sweex MO251 - page 9
English version 12 The network settings for Windows 98SE have now been configured correctly . The correct settings for the Internet browser will be discussed below. Internet browser settings for Windows 98SE, 2000 and XP 1. In order to properly access the modem, the browser settings must be correct. This is easy to check by starting up Internet Exp ...
-
Sweex MO251 - page 10
English version 13 Always click “Refresh network list” (Refresh network list) top left in this window first, to obtain the most recent listing. Select the name (also referred to as SSID) “Sweex MO251” by clicking it once. Now click “Connect (Connect). If it has successfully connected to the wireless network, the notification “Connected? ...
-
Sweex MO251 - page 11
English version 14 The modem login screen appears. Fill out the login name and the corresponding password. The standard login is “sweex” and the cor responding password is “mysweex”. If this login screen fails to appear , recheck the settings of your Internet browser as described above. Also check the IP address of your computer. In this IP ...
-
Sweex MO251 - page 12
English version 15 Setting the Internet Provider (ISP) In order to facilitate the installation process, the Sweex ADSL 2/2+ Modem/Router Annex A disposes of a pre-programmed list of provider settings. T o this end, go to the “Setup Wizard”. The following screen appears: Under “Countr y” select the appropriate country and under “ISP”, se ...
-
Sweex MO251 - page 13
English version 16 Y ou can enable or disable the wireless part by means of “Enable AP”. This feature is enabled by default. “AP” (Access Point) refers to the wireless part of the modem. The standard SSID is “Sweex MO251”. Y ou can change this under “SSID”. We recommend not changing this so you can always recognise the modem. Here y ...
-
Sweex MO251 - page 14
English version 17 1. Y ou can now see only a single line with options. Select “WPA”. 2. Underneath, select “WPA” or “WPA2”. This depends on the type suppor ted by the wireless card in your computer. Not all wireless adaptors support WPA2. 3. Select “Pre-Shared Key” 4. Under “PSK String”, enter your network code. You can create ...
-
Sweex MO251 - page 15
English version 18 The Sweex ADSL 2 Modem offers a pre-programmed list with common programmes and games. 1. Tick “Enable”. 2. Now select the programme or the game from the list under “Select Game”. 3. Under “IP Address”, enter the IP address of the computer for which you want to open the por ts. 4. Click on “Add”, then on “Save Al ...
-
Sweex MO251 - page 16
English version 19 1. Click on DMZ. 2. Here tick the option “Enable DMZ”. 3. Under “DMZ Host IP Address”, enter the IP address of the computer for which you want to open the por ts. 4. Click on “Submit” and “Save All”. Where to find the IP address of the computer Win2000/WinXP: Click Start – Run– T ype in “cmd” – press ENT ...
-
Sweex MO251 - page 17
English version 20 Changing the password (User Management) The standard login of the Sweex ADSL 2 can be changed as follows: in the main window select “T ools” and go to “User Management”. Here, under “User name”, you can choose a different login name and under “Password” the corresponding password. Repeat this password under “Con ...
-
Sweex MO251 - page 18
English version 21 Here the firmware of the modem can be updated. New firmware can be downloaded from the Sweex website under ”Service and support”. If the firmware file is zipped, make sure you select and extract the file first on a location on your computer where you can retrieve it easily . Now click “Browse” and select the extracted fir ...
Avez-vous une question à propos de Sweex MO251?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec Sweex MO251, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Sweex MO251 il est probable qu’il a envie de partager la façon de le résoudre.