-
JVC VN-T16/U - page 1
VN - T16 / U HD IP CAMERA INSTRUCTION S ...
-
JVC VN-T16/U - page 2
1 Contents Conten t s of this manual ................................................................................................. 2 Cautions and Warni ngs .................................................................................................. 2 FCC Compliance Statement ................................................................ ...
-
JVC VN-T16/U - page 3
2 Conten t s of this manual Ÿ Windows, Internet Explorer, DirectX and FAT32 are registered trademarks of Microsoft Corporation in the U.S. Ÿ Pentium is a registered trademark of Intel Corporation in the U.S . Ÿ NVIDIA and GeForce are trademark s or registered trademark s of NVIDIA Corporation in the U.S. Ÿ AMD, ATI and Radeon are trademark s of ...
-
JVC VN-T16/U - page 4
3 Caution Connect only one camera to the power line, A C24V/ DC12V. Do not share the power line with other equipment. The power cable between power source and the camera must be under 3 m. Caution When powering the camera from AC 24V , a UPS source should be considered to ensure satisfactory performance. FCC Compliance Statement Information to the ...
-
JVC VN-T16/U - page 5
4 1 About This Document This INSTRUCTIONS is designed to be a reference tool for the installation and operation your system including the camera ’s features , functions and detailed explanation of the menu tree. Overview of Contents This document contains the following chapters: Ÿ Chapter 2 , Product Overview , introduces the main functions and ...
-
JVC VN-T16/U - page 6
5 2 Product Overview Came ra Parts and Definitions Camera Overview Camera Parts and Definitions 3 2 Lens is not provided. 1 Safety Wire( F all P revention W ire , not provided) ...
-
JVC VN-T16/U - page 7
6 1. CS mount: connect the lens with the camera 2. Screw : lock Back focus Adjustment 3. Back focus Adjustment 4. Base: connect the camera with the tripod 5. SD card sl ot: insert a SD card into this slot for recording and storage 6. Video: not supported (for factory use only) 7. RJ45 Ethernet Connector/ PoE: insert the RJ45 cable for network conne ...
-
JVC VN-T16/U - page 8
7 3 I nsta llation and Connection s This chapter describes the installation and connection of the Box Camera. Before You Begin Please read this INSTRUCTIONS carefully before you install and operate the camera. Unpack Everything Ÿ HD IP Camera Ÿ WARRANTY CARD Ÿ SAFETY PRECAUTIONS Ÿ QUIC K GUIDE Ÿ 8 - PIN TERMINAL BLOCK for alarm input/output Ÿ ...
-
JVC VN-T16/U - page 9
8 Please check the items in accordance with the list on the warranty card. Finally you can remove the protective film of the camera. Mounting 1. Attach the camera to a pending mount. Insert the screws on the camera stand into either of the scre w holes on the base. Then tighten them up. 2. Mount the camera onto the ceiling/wall and fasten it secure ...
-
JVC VN-T16/U - page 10
9 Hardware and Software Requirements Computer Windows XP or Windows 7 as OS Internet Explorer Version 6.0 - 8.0 CPU: Intel Pentium IV X2 2.4 GHz or equivalent AMD Memory: 1G or above Display adapter Support DirectX9 for example NVIDIA GeForce 6 Series above AT I Mobility Radeon 9500 above . Power Supply This camera requires a DC12V / AC24V / PoE po ...
-
JVC VN-T16/U - page 11
10 2. Set the personal computer’s IP address. The camera’s default IP address is 192.168.0. 2 and sub mask is 255.255.255.0. 3. Check that the camera and computer are c onnected by pinging the IP address you have set. To do this, start a command prompt ( Windows: from the Start Menu, se lect Program. Then select Accessories and choose Command P ...
-
JVC VN-T16/U - page 12
11 • In Windows 7 only, Click 【 Tools 】 è 【 Internet Options 】 è 【 Security 】 o Enable Protected Mode (require restarting Internet Explorer) è Unchecked ...
-
JVC VN-T16/U - page 13
12 • Click 【 Tools 】 è 【 Internet Options 】 è 【 Security 】 è 【 Custom level 】 ...
-
JVC VN-T16/U - page 14
13 • Modify the configuration of IE ’ s security setting as follow: 【 Download signed ActiveX controls 】 è Prompt (recommended) 【 Download unsigned ActiveX controls 】 è Prompt 【 Initialize and script ActiveX not marked as safe for scripting 】 è Prompt 【 Automatic prompting for ActiveX controls 】 è Enable ...
-
JVC VN-T16/U - page 15
14 l 【 Run ActiveX controls and plug - ins 】 è Enable l 【 Script ActiveX controls marked safe for scripting * 】 è Enable 6. Type your setting IP address into the browser. 7. Then you should be able to see the camera image screen. ...
-
JVC VN-T16/U - page 16
15 4 Overview of Navigation and Controls Live View Live view is designed for gen eral users to control the camera. In the left list it displays : Ÿ Full Screen: Set Full screen Ÿ One shot: take a picture from live view Ÿ Audio In: get audio and output from PC. This menu is appeared by setting of Audio. Ÿ Audio Out: send audio and output from ca ...
-
JVC VN-T16/U - page 17
16 Basic Figure 4 - 1 Basic Image Color Automatic Exposure ...
-
JVC VN-T16/U - page 18
17 Fi gure 4 - 2 Automatic Exposure Automatic Exposure controls the light intensity of picture. There are four types for adjustment. You can select M anual , AES (Automatic Electronic Shutter) , Flicker - free 50Hz an d Flicker - free 60Hz for the camera depending on your application conditions. When choose the Manual, the Shutter S peed can be adj ...
-
JVC VN-T16/U - page 19
18 Figure 4 - 4 Brightness adjustment , Contrast , Saturation Shutter Speed Figure 4 - 5 Shutter Speed Set desired Shutter Speed from 1/ 2 5s to 1/ 10000 s. When video type is PAL ,t he Sh utter Speed can be set at 1/25, 1/50, 1/100, 1/120, 1/150, 1/200, 1/300, 1/500 , 1/750, 1/1500, 1/5000 and 1/10000s. When video type is NTSC ,the Shutter Speed c ...
-
JVC VN-T16/U - page 20
19 R Gain, B Gain & D Gain Figure 4 - 8 R Gain, B Gain & D Gain Set manual gain value of R Gain , B Gain , and D Gain from 0 to 255. This function is applied for manual lens only. The red( R ) gain is used to adjust the red color of the viewing image. It allows adjusting red gain manually according to user requirement, ranging from 0 to 255 ...
-
JVC VN-T16/U - page 21
20 of objects in the area expected to view, areas desired to see become dark and inv isible. Therefore, this function is essential. Picture Figure 4 - 12 Picture Picture Flip Set image to be upside or down. Select “ ON ” or “ OFF” to activate or deactivate the flip function. Picture Mirror Set image to be left or right. Select “ ON” or ...
-
JVC VN-T16/U - page 22
21 1 The user interface of Encoder No.1 is as follows : Figure 4 - 13 Encoder No. 1 Table below elaborates the above figure . Table 4 - 1 Compression Comp ression Item Function Choice Remark Encoder No.1 MJPEG MPEG4 Compression Format H.264 Set a default compression mode. 1080P 720P D1 4CIF VGA CIF Resolution QVGA 1080P is the highest resolution an ...
-
JVC VN-T16/U - page 23
22 QVGA @ 30fps MPEG4/ MJPEG : VGA, QVGA,@30fps Variable bit rate Rate control mode Constant bit rate Choose the Bit Rate control selection based on user requirements. Compression Ratio Customized mode Low Mid - low Standard Mid - high High Low: th is setting produces highest image quality while the file size increases. High: this setting produces ...
-
JVC VN-T16/U - page 24
23 2 The user interface of Encoder No. 2 is as follows : Figure 4 - 1 4 Encoder No.2 Table below elaborates the above figure . Table 4 - 2 Compression Compression Item Function Choice Remark Encoder No. 2 MJPEG MPEG4 H264 Compression Format no streaming Set H.264, MJPEG or MPEG4 as a default compression mode. Resolution D1 / 4CIF / CIF / VGA / QVGA ...
-
JVC VN-T16/U - page 25
24 PAL: H.264/MJPEG/MPEG - 4: D1, QVGA @ 25 fps NTSC: H.264/MJPEG/MPEG - 4: D1, QVGA @ 30 fps variable bit rate Rate control mode constant bit rate Choose the Bit Rate control selection based on user requi rements. Compression Ratio Customized mode Low Mid - low Standard Mid - high High Low: this setting produces highest image quality while the fil ...
-
JVC VN-T16/U - page 26
25 Mask Zone l Enable button “ ON” , then click “Set Mask Zone” to start mask setting . l Use mouse to drag a mask rectangle on the screen, click “ OK ” to complete the selection. l C lick “S ave ” to ena ble the mask setting. ...
-
JVC VN-T16/U - page 27
26 Figure 4 - 15 Mask Zone Note: Max 4 masks can be set on the screen. The maximum size of a mask is 15% of the screen. . . Alarm External Digital Input 1 When alarm input is connected, the camera triggers an alarm only when the normal state (open or closed) changes. Connect external dev ices such as sirens or flashing lights to the alarm output co ...
-
JVC VN-T16/U - page 28
27 1 Alarm Input Set the Alarm Input as “Alarm Input” or “OFF”. 2 Input Type Choose Normally Open or Normally Close Figure 4 - 16 External Digital Input1 Motion Detection Settings This function is designed to record video when the camera detects a motion. Figure 4 - 17 Motion Detection Settings • Motion Detection : Users c an choose to us ...
-
JVC VN-T16/U - page 29
28 Figure 4 - 19 Output Hold Time Note Please click the “ Save” button to save your settings. You can also click the left button “Reset to Default ” to set all the data and options as defaults. SD Recording Confined SD recording priority: alarm > mo tion > network loss . This function is designed for s toring video on the SD card. Ins ...
-
JVC VN-T16/U - page 30
29 Note l H.264 is the preferred source for recording. l If both Encoder No.1 and Encoder No. 2 are H.264, th e stream will choose the Encoder No. 2 as recording source. l SD recording can be enabled only when user choose the following 5 combinations. NO. Encoder No.1 Encoder No. 2 1 H.264 1080 p No streaming 2 H.264 720p H.264 D1 3 H.264 720p H.26 ...
-
JVC VN-T16/U - page 31
30 Email Server Settings Authentication Settings Figure 4 - 23 Email Server Settings Select an authentication type. 1. No Authentication: no restrict rule 2. SMTP: Simple Mail Transfer Protocol (SMTP) is an Internet standard for electronic mail (E - mail) transmission across Internet Protocol (IP) networks. 3. PLAIN: PLAIN is the name of a register ...
-
JVC VN-T16/U - page 32
31 Figure 4 - 26 Mail to If “ Send to A dministrato r” is set to “ON” when a motion happens, the E - mail server will always send a mail to the administrator. And E - mails can also be sent to multiple users when a motion occurs. Note Please click the “Save” button to save your settings. You can also click the left button “Reset to De ...
-
JVC VN-T16/U - page 33
32 Audio Output Ÿ Audio Output : Set to "ON" when delivering audio to a speaker connected to the camera, Ÿ Audio Output Level: Select among High, Mid and Low Figure 4 - 29 Audio Output Note: Audio Input/Output can have some n oise and delay. Note Please click the “ Save” button to save your settings. You can also click the left butt ...
-
JVC VN-T16/U - page 34
33 Port Ÿ Port: This is H ttp port number of WEB server in the camera. When H ttp is selected for Live Stream Protocol, Live View also uses the por t number. We recommend using the default port; if you need to change the default port, please contact your system administrator. Options: 1025 to 65535 (80 is the default). After changing the port numb ...
-
JVC VN-T16/U - page 35
34 RTSP Authentication Y ou should enter the Login ID, Password and Password (confirm) if selec t “ O N ” . Figure 4 - 32 Authentication Multicast Address You could choose the value from 224.0.0.23 to 239.255.255.254. Figure 4 - 33 Multicast Address Encoder No.1 & Encoder No.2 Figure 4 - 34 Encoder No.1 & Encoder No.2 Please choose desi ...
-
JVC VN-T16/U - page 36
35 H ttp s Figure 4 - 35 Certificate File Upload Us ers can upload certificate here: Click “ B rowse ”, it will pop out a window then you can choose the file that you want to upload. Admin F unction Administrator Press the item - Administrator Function on setting menu. You can setup system password . The default setting for system Admin ID and ...
-
JVC VN-T16/U - page 37
36 Figure 4 - 37 User Setting 1 Finally, click Save to save the settings. Figure 4 - 38 Reset Date/Time Set Display and Synchronization Mode Figure 4 - 39 Date and Time T he user can choose Synchronizati on Mode here from three different types . Set Date and Time Manually Set up the camera ’s date and time in the Set Date and Time Manually field. ...
-
JVC VN-T16/U - page 38
37 Daylight Figure 4 - 42 Daylight Daylight Saving Select “ ON ” to activate the daylight - saving function if you are in a daylight saving time zone (effective for NTP mode only), and then choose the starting time ,ending time and time adjustment. Note Please click the “ Save” button to save your settings. Y ou can also click the left butt ...
-
JVC VN-T16/U - page 39
38 Confi guration Video Type Users can select “NTSC” or “PAL” according requirement. Flicker by fluorescent light can be reduced by selecting PAL mode if the public p ower is 50Hz, or NTSC mode if the power is 60Hz. Figure 4 - 44 Video Type Note: Analog video output is not available. Import Configuration Settings This function is designed t ...
-
JVC VN-T16/U - page 40
39 Figure 4 - 48 Network Camera Reboot Event Log Click the buttons to display the desired logbooks or to delete all logs. Figure 4 - 49 Log Browse Information FW version and MAC address will be shown. Figure 4 - 50 FW version and MAC address ...
-
JVC VN-T16/U - page 41
40 Miscellane ous Click the button . This camera contains free open sou r ce code. Figure 4 - 51 Miscellane ous ...
-
JVC VN-T16/U - page 42
41 5 S pecification s Operational Specifications Image device 1/2.7 - type Mega - pixel CMOS sensor Sensitivity Color: 0. 6 lx , B/W: 0. 6 lx ( 50 % F1.2 ) D ay /N ight Easy D/N Auto Gain Control Off/On, selectable White Balance ATW (2800K ~ 8500K) and Manual Electric Shutter PAL:1/ 25 ~1/10000 sec NTSC: 1/ 30 ~1/10000 sec Noise Reduction Yes M oti ...
-
JVC VN-T16/U - page 43
42 Security Multiple user access levels with password protection Users 1 Administrator, 5 user s Video Access from Web Browser Full control of all camera settings available to administrator Minimum _ Web Browsing Requirements Windows XP or Windows 7 as O S , Internet Explorer Version 6.0 - 8 .0 , CPU: Intel Pentium IV X2 2.4 GHz or equivalent AM D, ...
Avez-vous une question à propos de JVC VN-T16/U?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec JVC VN-T16/U, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec JVC VN-T16/U il est probable qu’il a envie de partager la façon de le résoudre.