-
AEG 45003 - page 1
FAVORIT 45003 User manual Dishwasher ...
-
AEG 45003 - page 2
Thank you for choosing on e of our high-quality prod ucts. To ensure optimal and regula r performanc e of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficientl y. To refer to this manual any time you need to, we recomme nd y o u t o k e e p i t i n a s a f e p l a c ...
-
AEG 45003 - page 3
OPERATING INSTRUCTIONS SAFETY INFORMATION For your safety and correct oper ation of the appliance, read this manual carefully before installation and use. Always keep these inst ructions with the appliance even if you move or sell it. Users must fully know the operation and safety features of the app liance. Correct use • The appliance is designe ...
-
AEG 45003 - page 4
Installation • Make sure that the appliance is not damage d because of transport. Do not connect a damaged appliance. If necessary, c ontact the supplier. • Remove all packaging before first use. • A qualified and competent person mu st do the electrical installation. • A qualified and competent person mu st do the plumbing installation. ? ...
-
AEG 45003 - page 5
1 Upper basket 2 Water ha rdness dial 3 Salt container 4 Detergent dispens er 5 Rinse aid dispenser 6 Rating plate 7 Filters 8 Lower spray ar m 9 Upper spray arm 10 Worktop CONTROL PAN EL 6 1 2 3 4 7 8 5 A B 9 1 Programme knob 2 Multitab button (MULTITAB) 3 Delay start button (DEL AY) 4 Start button (START) 5 Digital display 6 Indicator lights 7 Pr ...
-
AEG 45003 - page 6
Indicator lights Wash phase Comes on when the washing phase or the rin sing phase operates. Dry phase Comes on when the drying phase operat es. Multitab Comes on when you activate the mul titab function Refer to 'Multi tab function'. Salt 1) Comes on when it is nec essary to fill the salt container. Refer to 'Use of dishwasher salt&a ...
-
AEG 45003 - page 7
• Programme duration. • Remaining time to the end of the programme. • End of a washing pr ogramme, the digital display shows a zero. • Number of hour s in delay start. •F a u l t c o d e s . Function buttons Use the function buttons for these operations: • To set the water softener. Refer to the chapter 'Setting the water softener& ...
-
AEG 45003 - page 8
Water hardness is measured in equivalent scales: • German degrees (dH°). • French degrees (°TH). • mmol/l (millimol per litre - internatio nal unit for the hardness of water). •C l a r k e . Adjust the water softener to the water hardness in your area. If necessary, contact your local water authority. Water hardness Water hardness setting ...
-
AEG 45003 - page 9
2. Release the function button A when the digital display shows the current settin g. Examples: – level 5 = – level 10 = 3. Press function button A to change the wat er softener level. Every ti me you press the button, the level increases. 4. Turn the programme knob to the off position to save the operation. USE OF DISH WASHER SALT CAUTION! Onl ...
-
AEG 45003 - page 10
1. Press the release button (A) to open the rinse aid dispenser. 2. Fill the rinse aid dispenser with rinse aid. The mark 'max.' shows the maximum level. 3. Remove the spilled rinse aid with an ab - sorbent cloth to prevent too much foam during the subseq uent washing pro - gramme. 4. Close the rinse aid dispenser. Adjusting the rinse aid ...
-
AEG 45003 - page 11
LOADING CUTLERY AND DISHES Helpful hints and tips CAUTION! Only use the appliance for household utensi ls that are applicable for dishwashers. Do not use the appliance to clean objects that can absorb water (spo nges, household cloths, etc.). • Before you load cutlery and dishes, do these steps: – Remove all food remainings and debris. – Make ...
-
AEG 45003 - page 12
The rows of prongs in th e lower ba sket can be flat to load large dishes, pots, pans and bowls. Cutlery basket WARNING! Do not put long-bladed knives in a vertical position . Arrange long and sharp cut lery hori - zontally in the upper basket. Be careful with sharp items. Use the cutlery grids. • Put the grids on the cutlery basket. • For larg ...
-
AEG 45003 - page 13
You can open the cutlery basket to remov e the cutlery more easily. Do th ese steps to remove the cutlery: 1. Put the cutler y basket on a table or work sur - face. 2. Open the handle. 3. Remove the cutlery. Hold the two parts of the handle tightly when you move the cutlery basket. Upper basket The upper basket is for sa ucers, salad bowls, cups, g ...
-
AEG 45003 - page 14
• For glasses with long stems, turn the glass holder to the left or to the right. • You can fold up or down the row of prongs on the left side of the upper basket to in - crease load flexibility. Adjustment of the height of the upper basket You can put the upper basket in two pos itions to increase load flexibility . Maximum height of the d ish ...
-
AEG 45003 - page 15
USE OF DETERGENT Only use detergents (powder, liquid or ta blet) that are applicable for dishwashers. Follow the data on the packaging: • Dosage recommended by the manufacturer. • Storage recommendations. Do not use more than the correct quantity of detergen t to save an environme nt. Do these steps to fill the detergent dispenser: 1. Open the ...
-
AEG 45003 - page 16
4. If you use detergent tablets, put the de - tergent tablet in the detergen t dispenser (A). 5. Close the lid of the detergent dispenser. Press the lid until it locks into position. Different brands of detergent dissolve in different times. Some de tergent tablets do not have the best cleaning resu lts during shor t washing programmes. Use long wa ...
-
AEG 45003 - page 17
The appliance must be switched off. 1. Press and hold function button A. Turn the programme knob counterclockwise until the programme marker agrees with the firs t washing programme on the control panel. 2. Release function button A whe n the display shows the water hardness level. 3. Turn the programme knob counterclockwise until the pr ogramme ma ...
-
AEG 45003 - page 18
Programme an d pro - gramme knob posi - tion Degree of soil Type of load Programme description PREWASH Any Part ial load (to be complete d later in the day). 1 cold rinse (to prevent food scraps to bond). Detergent is not necessary with this programme. 1) During the Auto 45°-70° programme , the soil level of the dis hes is given by how cloudy the ...
-
AEG 45003 - page 19
CAUTION! Open the door carefully. Hot steam can come free. Interrupting a washing programme Open the door. • The programme stops. Close the door. • The programme cont inues from the point of interruption. Cancelling a washing programme • Press and hold function buttons A and B. – In the digital display the time duratio n of the programme fl ...
-
AEG 45003 - page 20
Standby mode If you do not switch off the appliance at th e end of the washing programme, the appliance automatically goes into standby mode. The st andby mode decreases energy consumption. Three minutes after the end of the programme, all indicator lights go off and the digital display shows one horizontal bar. Press a button to go back to the end ...
-
AEG 45003 - page 21
3. To unlock the filter system, turn the han - dle on the microfilter (B) approximately 1/4 anticlockwise. 4. Remove the filter sy stem. 5. Hold the coarse filter (A) by the handle with the hole. 6. Remove th e coarse filter (A) from th e microfilte r (B). 7. Remove the flat filter (C) from the bot - tom of the appliance. 8. Clean the filters below ...
-
AEG 45003 - page 22
If there is a fault, first try to find a solution to the problem yourself. If you cannot find a solution to the problem yourself, contact the Service Force Centre. CAUTION! Switch off the appliance before you do the below suggested corrective actions. Fault code and malfunction Possible cause and solution • the digital display shows The dishwashe ...
-
AEG 45003 - page 23
Product number : .......... Serial number : .......... The cleaning results are not satisfa ctory The dishes are not clean • The selected washing prog ramme is not applicab le for the type of load and soil. • The baskets are loaded incorrectly so that water ca nnot reach all surfaces. • Spr ay arms do no t turn freel y because of incorrect ar ...
-
AEG 45003 - page 24
Put the appliance adjacent to a water tap and a water drain. Remove the appliance worktop to install it under a sink un it or a kitchen worktop. Make sure that the dimensions of the reces s agree with the given dim ensions. Do these steps to remove the appliance worktop: 1. Remove the rear screws (1). 2. Pull the worktop from the behind the ap - pl ...
-
AEG 45003 - page 25
WATER CONNECTION Water inlet hose Connected the appliance to a hot (max. 60°) or cold water supply. If the hot water comes from alternative source s of energy that are more environmentally friendly (e.g. solar or photovoltaic panels an d aeolian), use a hot water supply to decrease energy consumption. Connect the inlet hose to a water tap with an ...
-
AEG 45003 - page 26
2. Connect the water drain hos e to a stand pipe with vent-hole (minimum internal di - ameter 4 cm). Make sure that the drain hose is not bent or squashed to prevent that the water drai ns does not drain correctly. Remove the sink plug when the appliance drains the water to prevent that the wate r goes back into the appliance. A drain hose exten si ...
-
AEG 45003 - page 27
and human health, which could other wise be caused by inappropriate waste handling of this product. For more detailed information abou t recycling of this product, please contact your local council, your household wast e disp osal service or the sh op where you purchased the product. The packaging materials are environm entally fr iendly and can be ...
-
AEG 45003 - page 28
www.aeg-electrolux.com/shop 117942480 - A - 12 2010 ...
Avez-vous une question à propos de AEG 45003?
Utiliser le formulaire ci-dessous
Si vous n’avez pas résolu votre problème avec AEG 45003, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec AEG 45003 il est probable qu’il a envie de partager la façon de le résoudre.