Français dropdown-ico

Manuel d’utilisation Heat & Glo LifeStyle PALOMA-BZ-MOD

59 pages 2.77 mb
Télécharger

Aller à la page of 59

Summary
  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 1

    1 Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 Model(s): P ALOMA-BZ-MOD P ALOMA-GR-MOD P ALOMA-GY -MOD • Do not store or use gasoline or other fl am- mable vapors and liquids in the vicinity of this or any other appliance. • What to do if you smell gas - Do not try to light any appliance. - D ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 2

    Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 2 Congratulations Model Name: ___________________________________________ Date purchased/installed: __________________ Serial Number: __________________________________________ Location on appliance: ____________________ Dealership purchased from: _____ ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 3

    3 Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 T able of Contents 1 Listing and Code Approvals A. Appliance Certi fi cation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 B. Glass Speci fi cations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 C. BTU Speci fi cations . ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 4

    Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 4 Manufactured Home or Mobile Home installation may occur only after the home is site located and must conform with the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280, or, when such a standard is not applicable, the Standard ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 5

    5 Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 H. Requirements for the Commonwealth of Massachusetts For all side wall horizontally vented gas fueled equipment installed in every dwelling, building or structure used in whole or in part for residential purposes, including those owned or operated by ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 6

    Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 6 A. Design and Installation Considerations Heat & Glo direct vent gas appliances are designed to operate with all combustion air siphoned from outside of the building and all exhaust gases expelled to the outside. No additional outside air source i ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 7

    7 Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 Model A B C D E F G H I J K Paloma Inches 6 10-1/8 12-1/8 54 36 30-3/4 13-1/4 13-1/4 1 15-1/2 5 Millimeters 152 257 308 1372 914 781 337 337 25 394 127 3 3 F raming and Clearances Note: • Illustrations reflect typical installations and are FOR DESIG ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 8

    Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 8 Note: Flooring beneath appliance may reach 90 degrees plus room ambient temperature. Check with flooring manufacturer for maximum temperature allowed on flooring surfaces. It is permissible to place the appliance on carpet. Some carpet materials may b ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 9

    9 Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 A. V ent T ermination Minimum Clearances Fire Risk. Explosion Risk. Maintain vent clearance to combustibles as speci fi ed. • Do not pack air space with insulation or other materials. Failure to keep insulation or other materials away from vent pip ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 10

    Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 10 V = VENT TERMINAL X = AIR SUPPL Y INLET = AREA WHERE TERMINAL IS NOT PERMITTED Figure 4.4 Minimum Clearances for T ermination A = 12 inches................. clearances above grade, veranda, porch, deck or balcony B = 12 inches................. cleara ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 11

    11 Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 Fire Hazard. Explosion Risk. Asphyxiation Risk. Do NOT connect this gas appliance to a chimney fl ue serving a separate solid-fuel or gas burning appliance. • V ent this appliance directly outside. • Use separate vent system for this appliance. ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 12

    Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 12 EX. 2 EX. 1 2' 4' 6' 8' 10' 12' 14' 15' 30' 28' 26' 24' 22' 20' 18' 16' 14' 12' 10' 8' 6' 4' 2' 0' (MAX) (MIN) 32' 34' 3 ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 13

    13 Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 Figure 5.3 Figure 5.4 Adding V enting Components 4. For installations using a round support box/wall thimble (check pipe manufacturer's instructions), mark the wall for a 10 in. x 10 in. (254 mm x 254 mm) square hole. The center of the square ho ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 14

    Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 14 8 in. (203 mm) 7 in. (178 mm) 7 in. (178 mm) 6 in. (152 mm) 5. Installation requires a minimum of 6 in. (152 mm) horizontal run of vent with a 1/4 in. (6 mm) rise run towards the termination. Each 1 ft. (305 mm) of horizontal venting must include a 1 ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 15

    15 Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 1 1 . Place the wall thimble cover over the pipe assembly and slide the appliance and vent assembly towards the wall, carefully inserting the vent pipe into the vent termination cap assembly . It is important that the vent pipe extend into the vent t ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 16

    Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 16 40 ft. (12 m) MAXIMUM Figure 5.10 VERTICAL TERMINA TION CAP STORM COLLAR FLASHING FIRESTOP PIPE LENGTH SUPPORT BOX Figure 5.1 1 1. Check the installation instructions for required 1 in. (25 mm) clearances (air space) to combustibles when passing thro ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 17

    17 Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 4. Assemble the desired lengths of pipe and elbows necessary to reach from the appliance up through the round support box. Ensure that all pipe and elbow connections are in their fully twist-locked position. Assemble as instructed. 5. Cut a hole in t ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 18

    Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 18 CEILING FIRESTOP NAILS MINIMUM 1 in. (25 mm) CLEARANCE MINIMUM 1 in.(25 mm) CLEARANCE MINIMUM 1 in.(25 mm) CLEARANCE MINIMUM 1 in.(25 mm) CLEARANCE Figure 5.16 9. Twist-lock the vent cap and seal. Note: For multi-story vertical installations, a ceili ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 19

    19 Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 J. Cathedral Ceiling 1. Follow installation Steps 1 and 2 under vertical instal- lation section, page 16. 2. Remove shingles or other roof covering as necessary to cut the rectangular hole for the support box. Cut the hole 1/8 in. (3 mm) larger than ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 20

    Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 20 K. Class A Metal Chimney Figure 5.20 1. Remove existing chimney cap. 2. Measure the distance from the top of the chimney to the bottom of the ceiling support box, add 3 in. (76 mm) to this measurement, and cut a section of 4 in. (101 mm) flex pipe to ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 21

    21 Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 Figure 5.22 Figure 5.23 4. Pass the flex pipe down through the center of the chimney system, and center the top adapter on the top of the chimney pipe. Drill four 1/8 in. (3 mm) diameter holes through the top adapter , and into the chimney top. Ensur ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 22

    Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 22 7. If additional lengths of flex liner are needed to span the chimney height, use a flex coupler to connect the pieces of flex liner together . Connect the flex to the coupler by using four sheet metal screws for each side (Figure 5.27). 8. Secure th ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 23

    23 Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 HIGH WIND TERMINA TION CAP #SLK-991DA TOP ADAPTOR THREE SHEET MET AL SCREWS FLASHING 9. Attach the flex to the retro connector. Use three sheet metal screws to attach the flex liner to the connector (Figure 5.29). Mount the retro connector to the mas ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 24

    Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 24 3/4 3/4 3/4 Assembling Slim Line T rim Ring and Heat Shield Installing Slim Line T rim Ring and Heat Shield Measure from the fl oor to the center of the vent pipe. Cut out a 9-1/2 in. (241 mm) hole in the wall. Hold the trim ring/heat shield assembl ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 25

    25 Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 FIG. A 90 DEGREE ELBOW FIG. C MINIMUM CLEARANCE HTI VENT HHW2 PART #841-0670 (RECOMMENDED FOR OPTIMUM PERFORMANCE) TRIM RING WALL THIMBLE CENTER LINE MINIMUM OF 6 IN. (152 MM) OF PIPE THROUGH THE WALL INTERIOR WALL - 2 IN. (51 MM) CLEARANCE FROM REAR ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 26

    Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 26 A. Fuel Conversion • Make sure the appliance is compatible with available gas types. • Conversions must be made by a qualified service technician using Hearth & Home T echnologies speci fi ed and approved parts. 6 6 Gas Informat ion B. Gas P ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 27

    27 Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 Leak test all gas line joints and the gas control valve prior to and after starting the appliance. Before making the gas connection, ensure that the appliance you are installing is designed for the type of gas being supplied. This information can be ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 28

    Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 28 C. IntelliFire ® Ignition System Wiring This appliance requires a 1 10 V AC supply to the appliance junction box for operation. A wiring diagram is shown in Figure 7.2 on the next page. This appliance is equipped with an IntelliFire ® control valve ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 29

    29 Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 Figure 7.2 NOTE: Appliance will not operate unless properly grounded. * TRANSFORMER 3 V AC PLUG IN VA LV E GROUND TO APPLIANCE CHASSIS PIGGYBACK ON/OFF SWITCH INTERMITTENT PILOT IGNITOR IGNITION MODULE 3 V AC I S WHT ORG RED ORG BRN GRN BRN BLACK BA ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 30

    Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 30 Figure 7.4 Junction Box Wired to W all Switch E. W all Switch Installation for Fan (Optional) If the box is being wired to a wall mounted switch for use with a fan (See Figure 7.4): • The power supply for the appliance must be brought into a switch ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 31

    31 Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 B. Unbolting Appliance from the Pallet The appliance is bolted and screwed to the pallet for ship- ping. Use a 1/2 in. socket to remove the bolt in center of bottom plate. Use a Phillips screwdriver to remove the two screws in the front of the bottom ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 32

    Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 32 Figure 8.5 LAGGING CLEARANCE HOLE Using pliers, adjust the counterscrews to level the appli- ance. Place the lag bolt from the component bag in the center hole in the bottom plate (lagging clearance hole). The appliance must be lagged down securely t ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 33

    33 Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 Figure 8.10 Figure 8.9 Figure 8.8 E. T op to Rear V ent Conversion Kit Contents: T op cover (no hole); Back panel (with hole). T ools Required: Power drill; #2 Phillips bit; 5/32 in. (4 mm) Allen wrench; 5/8 in. (16 mm) open end wrench; high-temp sil ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 34

    Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 34 G. Installing the V ent Restrictor The vent restrictor plate must be installed before installing the baffle. On the top of inside firebox for top vent ,on back of firebox for rear vent, loosen the three screws out about 1/8 in. Place the vent restric ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 35

    35 Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 H. Installing Rock Media and Ember Material CAUTION! Risk of Cuts or Abrasions. Wear protective gloves and safety glasses during installation. KIT CONTENTS (1) Rear Rock Cluster (1) Left Rock Cluster (1) Right Rock Cluster (1 ) Bag Ember Material INS ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 36

    Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 36 4. Ember material is shipped with this kit. T o place the ember material: W ARNING! Risk of Explosion! Follow ember placement instructions. DO NOT place embers directly over burner ports. Replace ember material annually . Improperly placed embers int ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 37

    37 Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 Figure 8.21 I. Optional Blower The GFK-160A Blower has been designed to circulate room air through the appliance to enhance heat output. The GFK-160A blower system operates on 120 V AC, 60 Hz power . This is available through a receptacle in the fact ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 38

    Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 38 Figure 8.24 Locate the machine screw underneath the firebox on the right side. Position the temperature sensor switch/bracket assembly over the machine screw and attach with the wing nut. Finger tighten. See Figure 8.24. Figure 8.25 Attach rheostat i ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 39

    39 Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 Recommended operating procedures Ignite the fire in the appliance with the variable speed control switch in an "ON" position. The fan will automati- cally turn on when the temperature sensor switch closes at approximately 110 degrees Fahren ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 40

    Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 40 Installing flame control solenoid Remove the screw and knob from the variable regulator and discard. Unscrew the nut from the regulator and discard. Remove the bag containing a washer and blue and red plungers from the side of the flame control solen ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 41

    41 Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 RED JUMP ER WIR E TO BROWN WHITE ORANGE INTERMI TTENT PILOT IGNI TOR IGNIT ION MODULE 3 V AC REMOTE RECEIVER ORANGE GREEN BLACK RED VALVE GROUND TO FIREPLACE CHASSIS TRANSFORMER 3 V AC PLUG IN ORANGE ORANGE RED RED FLAME CONTROL SOLENOID BATTERY PACK ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 42

    Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 42 L. Inner Glass Door Assembly Replacement Turn the appliance OFF and let it cool down before replac- ing the inner glass door assembly. With the front door assembly removed from the appliance, remove the inner glass door assembly by disengaging the sp ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 43

    43 Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 B. Controls On/off Switch: When this switch is in the ON position, the pilot ignitor is engaged until temperature is established. The burner automatically turns on. V alve V ariable Control: This knob controls the flame height from low (“LO”) to ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 44

    Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 44 C. Lighting Instructions (IPI) The IPI system may be operated with two D-cell batteries. When using batteries, unplug the transformer . T o prolong battery life, remove them when using the transformer . 1. This appliance is equipped with an ignition ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 45

    45 Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 Initial Break-in Procedure When you light the appliance, you may notice that it pro- duces heat which does have an associated odor or smell. If you feel this odor is excessive it may require the initial three to four hour continuous burn on high foll ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 46

    Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 46 1 0 10 T roubleshooting A. IntelliFire Ignition System With proper installation, operation, and maintenance your gas appliance will provide years of trouble-free service. If you do experience a problem, this troubleshooting guide will assist a quali ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 47

    47 Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 IntelliFire Ignition System - (continued) Symptom Possible Cause Corrective Action 4. Pilot lights but contin- ues to spark, and main burner will not ignite. (If the pilot continues to spark after the pilot fl ame has been lit, fl ame recti fi cat ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 48

    Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 48 1 1 11 Maint aining and Ser vicing Appliance Although the frequency of appliance servicing and maintenance will depend on use and the type of installation, a quali fi ed service technician should perform an appliance checkup at the beginning of each ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 49

    49 Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 Inspect Maintenance T asks 1. Inspect for scratches, dents or other damage and repair as necessary . 2. V erify no obstructions to air fl ow through the louvers. 3. V erify maintenance of proper clearance to combustible household objects. Gasket Sea ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 50

    Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 50 Height includes 3/8 in (9.53 mm) hearth pad B C I G D H F E A Hearth Pad Height includes 3/8 in (9.53 mm) hearth pad Figure 12.1 Appliance Dimensions Location Inches Millimeter Location Inches Millimeter A 18-7/8 479 F 7-1/8 181 B 40-3/4 1035 G 30 76 ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 51

    51 Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 B. V ent Components Diagram Figure 12.3 SLP Series V ent Components 9-7/16 in. 240 mm 6-9/16 in. 167 mm 6-9/16 in. 167 mm 6-9/16 in. 167 mm 6-9/16 in. 167 mm 6 in. 152 mm 6-1/2 in. 165 mm 9-3/4 in. 248 mm 9-1/4 in. 235 mm 7-1/4 in. 184 mm 7-1/4 in. 1 ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 52

    Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 52 C. V ent Components List COMPONENTS SLP-WT -BK Ceiling Support / Wall Thimble, Black SLP-CCS-BK Cathedral Ceiling Support, Black SLP6-BK 6 inch Pipe Length, Black SLP4-BK 9 inch Pipe Length, Black SLP12-BK 12 inch Pipe Length, Black SLP34-BK 24 inch ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 53

    53 Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 Beginning Manufacturing Date: Aug 2009 Ending Manufacturing Date: ______ D. Service Parts Service Parts Diagram P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA GY -MOD Paloma-GY -MOD ( Gray), Paloma-GR-MOD ( Green), Paloma-BZ-MOD (Bronze)) Part number list o ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 54

    Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 54 D. Service Parts List P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA GY -MOD IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number . All parts listed in this m ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 55

    55 Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 Beginning Manufacturing Date: Aug 2009 Ending Manufacturing Date: ______ D. Service Parts P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA GY -MOD IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 56

    Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 56 D. Service Parts List P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA GY -MOD IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number . All parts listed in this m ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 57

    57 Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 E. Limited Lifetime W arranty 4021-645C 12-29-10 Page 1 of 2 Hearth & Home T echnologies Inc. LIMITED LIFETIME W ARRANTY Hearth & Home T echnologies Inc., on behalf of its hearth brands (”HHT”), extends the following warranty for HHT gas, ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 58

    Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 58 4021-645C 12-29-10 Page 2 of 2 W ARRANTY CONDITIONS:  7KLVZDUUDQWRQOFRYHUV++7DSSOLDQFHVWKDWDUHSXUFKDVHGW KURXJKDQ++7 DXWKRUL]HGGHDOHURUGLVWULEXWRU  $ OLVWRI ++7DXWKRUL]HGGHDOHU ...

  • Heat & Glo LifeStyle PALOMA-BZ-MOD - page 59

    59 Heat & Glo • P ALOMA-BZ-MOD, P ALOMA-GR-MOD, P ALOMA-GY -MOD • 2189-900 Rev . i • 5/12 Heat & Glo, a brand of Hearth & Home T echnologies Inc. 7571 215th Street West, Lakeville, MN 55044 www .heatnglo.com F . Contact Information Please contact your Heat & Glo dealer with any questions or concerns. For the location of your n ...

Fabricant Heat & Glo LifeStyle Catégorie Indoor Fireplace

Les documents que nous recevons du fabricant de l'appareilHeat & Glo LifeStyle PALOMA-BZ-MOD peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Heat & Glo LifeStyle
- manuels d’utilisations PALOMA-BZ-MOD
- fiches produit Heat & Glo LifeStyle
- dépliants
- ou étiquettes-énergie Heat & Glo LifeStyle PALOMA-BZ-MOD
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Heat & Glo LifeStyle PALOMA-BZ-MOD.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Heat & Glo LifeStyle PALOMA-BZ-MOD, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Heat & Glo LifeStyle PALOMA-BZ-MOD. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Heat & Glo LifeStyle PALOMA-BZ-MOD.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Heat & Glo LifeStyle PALOMA-BZ-MOD, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Heat & Glo LifeStyle PALOMA-BZ-MOD par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Heat & Glo LifeStyle PALOMA-BZ-MOD.

Le manuel d’utilisation complet Heat & Glo LifeStyle, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Heat & Glo LifeStyle PALOMA-BZ-MOD - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Heat & Glo LifeStyle PALOMA-BZ-MOD, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lHeat & Glo LifeStyle PALOMA-BZ-MOD qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Heat & Glo LifeStyle PALOMA-BZ-MOD - qui devraient nous aider dans les premières étapes lors de l'utilisation Heat & Glo LifeStyle PALOMA-BZ-MOD
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Heat & Glo LifeStyle PALOMA-BZ-MOD
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Heat & Glo LifeStyle PALOMA-BZ-MOD dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Heat & Glo LifeStyle PALOMA-BZ-MOD?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Heat & Glo LifeStyle PALOMA-BZ-MOD, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Heat & Glo LifeStyle PALOMA-BZ-MOD il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)